Summitd
30 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises Gauge IpAddress |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.23688 | Nodesummit-development | |||
| 1.3.6.1.4.1.23688.1 | Nodesummit-Products | |||
| 1.3.6.1.4.1.23688.1.1 | Nodeuni-a | |||
| 1.3.6.1.4.1.23688.1.1.1 | Scalarname | read-only | mandatory | Name of the unit. |
| 1.3.6.1.4.1.23688.1.1.2 | Scalarcondition | read-only | mandatory | Condition of the unit (1-ok,2-Error,3-Warning). |
| 1.3.6.1.4.1.23688.1.1.3 | Scalarmannum | read-only | mandatory | Maufacturing number of the unit. |
| 1.3.6.1.4.1.23688.1.1.4 | Scalarstatus | read-only | mandatory | Status of the unit. |
| 1.3.6.1.4.1.23688.1.1.5 | Scalarrssi | read-only | mandatory | Receive strenght indicator in -db (negative level). |
| 1.3.6.1.4.1.23688.1.1.6 | Scalarebno | read-only | mandatory | Eb/No signal quality in 0.1 db (72 -> 7.2db). |
| 1.3.6.1.4.1.23688.1.1.7 | Scalarberr | read-only | mandatory | Bit error rate bit/sec. |
| 1.3.6.1.4.1.23688.1.1.8 | Scalartemperature | read-only | mandatory | Temperature of the unit . |
| 1.3.6.1.4.1.23688.1.1.9 | ScalarmaxENspeed | read-only | mandatory | Maximum enabled speed of the radio in Mbit/sec. |
| 1.3.6.1.4.1.23688.1.1.10 | ScalarcurrentRadioSpeed | read-only | mandatory | Current speed of the radio in Mbit/sec |
| 1.3.6.1.4.1.23688.1.1.11 | Scalartype | read-only | mandatory | Uni type. |
| 1.3.6.1.4.1.23688.1.1.12 | ScalartxFreq | read-only | mandatory | Frequency of the transmitter in MHz. |
| 1.3.6.1.4.1.23688.1.1.13 | ScalarrxFreq | read-only | mandatory | Frequency of the receiver in MHz. |
| 1.3.6.1.4.1.23688.1.1.14 | ScalartxDataSpeed | read-only | mandatory | Current data speed of the transmitter in bit/sec. |
| 1.3.6.1.4.1.23688.1.1.15 | ScalarrxDataSpeed | read-only | mandatory | Current data speed of the receiver in bit/sec. |
| 1.3.6.1.4.1.23688.1.1.16 | ScalarremoteName | read-only | mandatory | Name of the remote Unit. |
| 1.3.6.1.4.1.23688.1.1.17 | ScalarremoteIPaddress | read-only | mandatory | IP address of the remote unit |
| 1.3.6.1.4.1.23688.1.1.18 | Scalaratpc | read-only | mandatory | ATPC - Automatic Transmit Power Control (1-enabled, 2-disabled) |
| 1.3.6.1.4.1.23688.1.1.19 | ScalartxPower | read-only | mandatory | Actual Transmit Power [dBm] |
| 1.3.6.1.4.1.23688.1.1.20 | Scalaracm | read-only | mandatory | ACM - Adaptive Coding & Modulation (1-enabled, 2-disabled) |
| 1.3.6.1.4.1.23688.1.1.21 | ScalartxModulation | read-only | mandatory | Current Modulation (Tx) |
| 1.3.6.1.4.1.23688.1.1.22 | ScalarrxModulation | read-only | mandatory | Current Modulation (Rx) |
| 1.3.6.1.4.1.23688.1.1.23 | ScalartxBandwidth | read-only | mandatory | Actual Transmit Bandwidth [MHz] |
| 1.3.6.1.4.1.23688.1.1.24 | ScalarrxBandwidth | read-only | mandatory | Actual Receiver Bandwidth [MHz] |
| 1.3.6.1.4.1.23688.1.1.25 | ScalarlicenseExpire | read-only | mandatory | License expire time (time to blocked radio) [day], 0 Blocked, -1 no Expire time set |
| 1.3.6.1.4.1.23688.2 | Nodesummitd-Common | |||
| 1.3.6.1.4.1.23688.3 | Nodesummitd-Experimental |