SyncE-MIB
30 objects
This file is proprietary MIB for SyncE (Synchronous Ethernet) implementation that confirms to standard ITU-T G.8264
Imported Objects
| IF-MIB | InterfaceIndex |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.2.79 | IdentityfsSynceMIB | This file is proprietary MIB for SyncE (Synchronous Ethernet) implementation that confirms to standard ITU-T G.8264 | ||
| 1.3.6.1.4.1.10876.101.2.79.1 | NodefsSynceObjects | |||
| 1.3.6.1.4.1.10876.101.2.79.1.1 | NodefsSynceGeneralGroup | |||
| 1.3.6.1.4.1.10876.101.2.79.1.1.1 | ScalarfsSynceGlobalSysCtrl | read-write | current | This object is used to initialise/de-initialise the module |
| 1.3.6.1.4.1.10876.101.2.79.1.1.2 | TablefsSynceTable | not-accessible | current | This table contains information about SyncE module at global level |
| 1.3.6.1.4.1.10876.101.2.79.1.1.2.1 | RowfsSynceEntry | not-accessible | current | Contains information about parameters of a switch/router instance. The entry in this table is created using the fsSynceContextRowStatus object only if the virt… |
| 1.3.6.1.4.1.10876.101.2.79.1.1.2.1.1 | ColumnfsSynceContextId | not-accessible | current | This object is a unique context identifier for each entry. Each virtual context will be able to run SyncE protocol individually and will be distinguished by th… |
| 1.3.6.1.4.1.10876.101.2.79.1.1.2.1.2 | ColumnfsSynceTraceOption | read-write | current | This variable governs the trace levels in the SyncE module. A four byte integer is used for enabling the trace level. Each bit in the four byte integer represe… |
| 1.3.6.1.4.1.10876.101.2.79.1.1.2.1.3 | ColumnfsSynceQLMode | read-write | current | This object is used to configure QL Enable/Disable mode for the selection process in SyncE module. The default value of this object is Enabled. In the disabled… |
| 1.3.6.1.4.1.10876.101.2.79.1.1.2.1.4 | ColumnfsSynceQLValue | read-only | current | This object contains the QL value selected through the clock selection process. The value of this object shall be used while transmitting the SSM packets. If t… |
| 1.3.6.1.4.1.10876.101.2.79.1.1.2.1.5 | ColumnfsSynceSSMOptionMode | read-write | current | This object is used to select Option 1(Europe) or Option 2(America) clocks in SyncE. |
| 1.3.6.1.4.1.10876.101.2.79.1.1.2.1.6 | ColumnfsSynceSelectedInterface | read-only | current | This object represent the currently selected interface which QL value is being used for transmitting QL in SSM packets. |
| 1.3.6.1.4.1.10876.101.2.79.1.1.2.1.7 | ColumnfsSynceContextRowStatus | read-write | current | Used for creation/deletion of enteries in the table |
| 1.3.6.1.4.1.10876.101.2.79.1.2 | NodefsSynceInterfaceConfiguration | |||
| 1.3.6.1.4.1.10876.101.2.79.1.2.1 | TablefsSynceIfTable | not-accessible | current | Table containing configuration information on SyncE interfaces. |
| 1.3.6.1.4.1.10876.101.2.79.1.2.1.1 | RowfsSynceIfEntry | not-accessible | current | This object contains SyncE configuration information of an interface. |
| 1.3.6.1.4.1.10876.101.2.79.1.2.1.1.1 | ColumnfsSynceIfIndex | not-accessible | current | Uniquely identifies an interface in the system. |
| 1.3.6.1.4.1.10876.101.2.79.1.2.1.1.2 | ColumnfsSynceIfSynceMode | read-write | current | This object controls enabling/disabling of Synchronous Ethernet feature on an interface. In the disabled state, SyncE packets will not considered for synchroni… |
| 1.3.6.1.4.1.10876.101.2.79.1.2.1.1.3 | ColumnfsSynceIfEsmcMode | read-write | current | This object represent the ESMC mode i.e. whether SSM is expected to be received on this interface or SSM are to be tranmissted on this interface. rx : SSM is e… |
| 1.3.6.1.4.1.10876.101.2.79.1.2.1.1.4 | ColumnfsSynceIfPriority | read-write | current | This object contains the priority value of an interface. It is used by the selection algorithm in order to select the best QL value among all the interfaces. I… |
| 1.3.6.1.4.1.10876.101.2.79.1.2.1.1.5 | ColumnfsSynceIfQLValue | read-write | current | This object contains the QL value for a SyncE interface. The value of this object is not considered in QL disabled mode. The default value on this object is DN… |
| 1.3.6.1.4.1.10876.101.2.79.1.2.1.1.6 | ColumnfsSynceIfIsRxQLForced | read-only | current | This object will be true if operator manually assign the QL value to an interface. |
| 1.3.6.1.4.1.10876.101.2.79.1.2.1.1.7 | ColumnfsSynceIfLockoutStatus | read-write | current | This object contains the lockout status for SyncE interface. Lockout temporarily removes a timing source as available synchronization source for the selection … |
| 1.3.6.1.4.1.10876.101.2.79.1.2.1.1.8 | ColumnfsSynceIfSignalFail | read-only | current | If the hold off timer expires and no SyncE packet was received till then by the port then the status of the port changes to signal fail status. As defined in I… |
| 1.3.6.1.4.1.10876.101.2.79.1.2.1.1.9 | ColumnfsSynceIfPktsTx | read-only | current | This object contains the total number of transmitted SyncE packets on an interface. |
| 1.3.6.1.4.1.10876.101.2.79.1.2.1.1.10 | ColumnfsSynceIfPktsRx | read-only | current | This object contains the total number of received SyncE packets on an interface. |
| 1.3.6.1.4.1.10876.101.2.79.1.2.1.1.11 | ColumnfsSynceIfPktsRxDropped | read-only | current | This object contains the total number of dropped SyncE packets on an interface. |
| 1.3.6.1.4.1.10876.101.2.79.1.2.1.1.12 | ColumnfsSynceIfPktsRxErrored | read-only | current | This object contains the total number of SyncE packets whose processing(decoding) resulted into error. |
| 1.3.6.1.4.1.10876.101.2.79.1.2.1.1.13 | ColumnfsSynceIfRowStatus | read-write | current | Used for creation/deletion of enteries in the SyncE interface table |
| 1.3.6.1.4.1.10876.101.2.79.2 | NodefsSynceNotifications |