TAILF-ALARM-MIB
39 objects
Alarm MIB for Tail-f Systems. This MIB represents alarms as states, where a row in the alarm table corresponds to a device, an object within the device and an unique alarm type. If the severity of an alarm or a the clear state is changed this is an update to an existing alarm entry and not a new. When the resource reports a clear on the alarm the alarm entry still exists until administrative processes purges the alarm list. These procedures are out of the scope for this module.
Imported Objects
| IANA-ITU-ALARM-TC-MIB | IANAItuEventType |
| ITU-ALARM-TC-MIB | ItuPerceivedSeverity |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime TruthValue |
| TAILF-ALARM-TC-MIB | TfAlarmIndex TfAlarmOperatorState TfProbableCause TfUtf8String TfYANGResource |
| TAILF-TOP-MIB | tfModules |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.24961.2.103 | IdentitytfAlarmMIB | Alarm MIB for Tail-f Systems. This MIB represents alarms as states, where a row in the alarm table corresponds to a device, an object within the device and an … | ||
| 1.3.6.1.4.1.24961.2.103.1 | NodetfAlarmObjects | |||
| 1.3.6.1.4.1.24961.2.103.1.1 | NodetfAlarms | |||
| 1.3.6.1.4.1.24961.2.103.1.1.1 | ScalartfAlarmNumber | read-only | current | This object shows the total number of of entries in the tfAlarmTable. |
| 1.3.6.1.4.1.24961.2.103.1.1.2 | ScalartfAlarmLastChanged | read-only | current | A timestamp when the active alarm table was last changed. The value can be used by a manager to initiate an alarm resynchronization procedure. NOTE: All fields… |
| 1.3.6.1.4.1.24961.2.103.1.1.5 | TabletfAlarmTable | not-accessible | current | This table list all alarms in the system. Entries are created when a resource has a new alarm state. If the same resource has several active alarms, with diffe… |
| 1.3.6.1.4.1.24961.2.103.1.1.5.1 | RowtfAlarmEntry | not-accessible | current | One entry in the table holds one alarm for a given resource. Entries are created by the system when a resource has a new alarm state. Entries are deleted by al… |
| 1.3.6.1.4.1.24961.2.103.1.1.5.1.1 | ColumntfAlarmIndex | not-accessible | current | A unique value, greater than zero, for each alarm. The value for each alarm must remain constant at least from one re-initialization of the entity to the next … |
| 1.3.6.1.4.1.24961.2.103.1.1.5.1.2 | ColumntfAlarmType | read-only | current | This provides an identification of the alarm type. Together with tfAlarmSpecificProblem, this is a unique identification of the alarm. Different managed object… |
| 1.3.6.1.4.1.24961.2.103.1.1.5.1.3 | ColumntfAlarmDevice | read-only | current | The name of the managed device. May also be the system itself for self-management alarms. Note that this object is not fine-grained enough to pinpoint the alar… |
| 1.3.6.1.4.1.24961.2.103.1.1.5.1.4 | ColumntfAlarmObject | read-only | current | Name of alarm object within a device based on YANG naming. Note that the granularity must be good enough to guarantee unique alarm states and relevant resource… |
| 1.3.6.1.4.1.24961.2.103.1.1.5.1.5 | ColumntfAlarmObjectOID | read-only | current | Name of alarm object based on SNMP naming. Note that the granularity must be good enough to guarantee unique alarm states and relevant resource identification … |
| 1.3.6.1.4.1.24961.2.103.1.1.5.1.6 | ColumntfAlarmObjectStr | read-only | current | Name of alarm object based on any other naming. Note that the granularity must be good enough to guarantee unique alarm states and relevant resource identifica… |
| 1.3.6.1.4.1.24961.2.103.1.1.5.1.7 | ColumntfAlarmSpecificProblem | read-only | current | This object is used when the 'tfAlarmType' object cannot uniquely identify the alarm type. Normally, this is not the case, and this leaf is the empty string. |
| 1.3.6.1.4.1.24961.2.103.1.1.5.1.8 | ColumntfAlarmEventType | read-only | current | The event type as defined in X.733/X.736. |
| 1.3.6.1.4.1.24961.2.103.1.1.5.1.9 | ColumntfAlarmProbableCause | read-only | current | The probable cause as defined in X.733/X.736. |
| 1.3.6.1.4.1.24961.2.103.1.1.5.1.10 | ColumntfAlarmOrigTime | read-only | current | Time for alarm raise |
| 1.3.6.1.4.1.24961.2.103.1.1.5.1.11 | ColumntfAlarmTime | read-only | current | A time stamp of the alarm state change event. Note that this variable represents the last change of the alarm state, like changed severity or additional text. … |
| 1.3.6.1.4.1.24961.2.103.1.1.5.1.12 | ColumntfAlarmSeverity | read-only | current | The severity of the alarm as defined by X.733. Note that this may not be the original severity since the alarm may have changed severity. For cleared alarms, t… |
| 1.3.6.1.4.1.24961.2.103.1.1.5.1.13 | ColumntfAlarmCleared | read-only | current | Indicates if the alarm is cleared or not. |
| 1.3.6.1.4.1.24961.2.103.1.1.5.1.14 | ColumntfAlarmText | read-only | current | A user friendly text describing the alarm. Intended for human consumption. |
| 1.3.6.1.4.1.24961.2.103.1.1.5.1.15 | ColumntfAlarmOperatorState | read-only | current | The operator state of the alarm. |
| 1.3.6.1.4.1.24961.2.103.1.1.5.1.16 | ColumntfAlarmOperatorNote | read-only | current | Operator note for the alarm. |
| 1.3.6.1.4.1.24961.2.103.2 | NodetfAlarmNotifications | |||
| 1.3.6.1.4.1.24961.2.103.2.0 | NodetfAlarmNotifsPrefix | |||
| 1.3.6.1.4.1.24961.2.103.2.0.1 | NotificationtfAlarmIndeterminate | current | Indeterminate alarms are sent when errors occur for which the severity level cannot be determined. | |
| 1.3.6.1.4.1.24961.2.103.2.0.2 | NotificationtfAlarmWarning | current | Warning alarms are sent for potential problems that haven't yet caused any significant effects. | |
| 1.3.6.1.4.1.24961.2.103.2.0.3 | NotificationtfAlarmMinor | current | Minor alarms are sent for non-service affecting problems, and indicate that corrective action should be taken to prevent a more serious fault. | |
| 1.3.6.1.4.1.24961.2.103.2.0.4 | NotificationtfAlarmMajor | current | Major alarms are sent for service affecting problems that require urgent corrective action. | |
| 1.3.6.1.4.1.24961.2.103.2.0.5 | NotificationtfAlarmCritical | current | Critical alarms are sent for service affecting problems that require immediate corrective action. | |
| 1.3.6.1.4.1.24961.2.103.2.0.6 | NotificationtfAlarmClear | current | A clear alarm indicates that a previously reported alarm is now cleared by the underlying resource. | |
| 1.3.6.1.4.1.24961.2.103.2.1 | NodetfAlarmNotifsObjects | |||
| 1.3.6.1.4.1.24961.2.103.2.1.1 | ScalartfAlarmStateChangeText | accessible-for-notify | current | The text associated with the state change reported by the notification. |
| 1.3.6.1.4.1.24961.2.103.10 | NodetfAlarmConformance | |||
| 1.3.6.1.4.1.24961.2.103.10.1 | NodetfAlarmCompliances | |||
| 1.3.6.1.4.1.24961.2.103.10.1.1 | CompliancetfAlarmCompliance | current | Compliance information for this MIB module | |
| 1.3.6.1.4.1.24961.2.103.10.2 | NodetfAlarmGroups | |||
| 1.3.6.1.4.1.24961.2.103.10.2.1 | GrouptfAlarmNotifs | current | The alarm notifications that can be sent from the system. | |
| 1.3.6.1.4.1.24961.2.103.10.2.2 | GrouptfAlarmObjs | current | The alarm objects. |