TELESTE-COMMON-MIB
121 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter IpAddress |
| RFC1213-MIB | DisplayString |
| TELESTE-ROOT-MIB | common DateAndTime TPhysAddress Uint16 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3715.99.1 | Nodeelement | |||
| 1.3.6.1.4.1.3715.99.1.1 | NodeelementInformation | |||
| 1.3.6.1.4.1.3715.99.1.1.1 | ScalarelementName | read-write | mandatory | This is the logical name of the controlling module of the network element. The name may or may not be the same as the module's name in the moduleTable. |
| 1.3.6.1.4.1.3715.99.1.1.2 | ScalarelementStructure | read-only | mandatory | This object tells whether the device is a single compact device or a modular device. |
| 1.3.6.1.4.1.3715.99.1.1.3 | ScalarelementConfigChangeCode | read-only | optional | This object is an indicator about changes in the network element configuration. How the value is formed is device dependent. It can be a counter, a checksum of… |
| 1.3.6.1.4.1.3715.99.1.1.4 | ScalarelementResetCount | read-only | optional | Total number of software resets during the device's life time. |
| 1.3.6.1.4.1.3715.99.1.1.5 | ScalarelementTotalUpTime | read-only | mandatory | The total uptime the device (software) has been running. Unit 1 day. |
| 1.3.6.1.4.1.3715.99.1.1.6 | ScalarelementLatitude | read-write | optional | Device latitude coordinate. Unit 0.00001 degrees. |
| 1.3.6.1.4.1.3715.99.1.1.7 | ScalarelementLongitude | read-write | optional | Device longitude coordinate. Unit 0.00001 degrees. |
| 1.3.6.1.4.1.3715.99.1.1.8 | ScalarelementAltitude | read-write | optional | Device altitude coordinate. Unit 1 metre. |
| 1.3.6.1.4.1.3715.99.1.2 | NodeelementStatus | |||
| 1.3.6.1.4.1.3715.99.1.2.1 | ScalarstatusGeneral | read-only | mandatory | A number stating the general status of the element. Values: 1 = Normal 2 = At least one Notification is active 3 = At least one Warning is active 4 = At least … |
| 1.3.6.1.4.1.3715.99.1.2.2 | ScalarstatusBusMaster | read-only | optional | A number stating the Bus Master status of the NE. Values: 1 = The NE is a slave-only device 2 = The NE is configured as slave 3 = The NE is configured as maste… |
| 1.3.6.1.4.1.3715.99.1.2.3 | ScalarstatusLmt | read-only | optional | A number telling if the Local Management Terminal (LMT) is connected to the element. Values: 1 = The element does not have an LMT interface 2 = The element can… |
| 1.3.6.1.4.1.3715.99.1.2.4 | ScalarstatusLid | read-only | optional | Element lid status: 1 = no lid (no lid sensor is available) 2 = lid is closed 3 = lid is open |
| 1.3.6.1.4.1.3715.99.1.2.5 | ScalarstatusTemperature | read-only | optional | Element temperature status: 1 = normal 2 = HIHI 3 = Hi 4 = Lo 5 = LOLO |
| 1.3.6.1.4.1.3715.99.1.2.6 | ScalarstatusFan | read-only | mandatory | A common status object for all fans in the device. fanNormal(1) = all fans operate normally fanFailure(2) = at least one fan has a failure |
| 1.3.6.1.4.1.3715.99.1.2.7 | ScalarstatusHardware | read-only | mandatory | Device hardware status: hwNormal(1) = the hardware operates normally hwFailure(2) = a hardware failure is detected |
| 1.3.6.1.4.1.3715.99.1.2.8 | ScalarstatusSoftware | read-only | mandatory | Device software status: swNormal(1) = the software operates normally swFailure(2) = a software failure is detected swMissing(3) = the software or firmware is m… |
| 1.3.6.1.4.1.3715.99.1.2.9 | ScalarstatusSettings | read-only | mandatory | Status of device settings: settingsStable(1) = settings are stable settingsChanged(2) = settings have been (recently) changed settingsNotAvailable(3) = setting… |
| 1.3.6.1.4.1.3715.99.1.3 | NodeelementControl | |||
| 1.3.6.1.4.1.3715.99.1.3.1 | ScalarcontrolResetElement | read-write | mandatory | On write requests this object commands the module to reset itself. If softReset(3) or hardReset(2) can not be performed, then BAD VALUE error is returned. On r… |
| 1.3.6.1.4.1.3715.99.1.3.2 | ScalarcontrolBusMasterAdminState | read-write | optional | This object tells whether the element is configured as a bus master or not. Only relevant for bus master type of elements. Others return no(2). |
| 1.3.6.1.4.1.3715.99.1.3.3 | ScalarcontrolAlarmDetection | read-write | mandatory | This variable is used to disable or enable the element alarm checking. When disabled(1), the element will not check any alarms (or send traps). Default value i… |
| 1.3.6.1.4.1.3715.99.1.3.4 | ScalarcontrolMaxNumberTrapReceivers | read-only | mandatory | Number of entries in the elementTrapReceiverTable. At least one trap entry must be supported. |
| 1.3.6.1.4.1.3715.99.1.3.5 | TablecontrolTrapReceiverTable | not-accessible | optional | A table of manager trap receiver addresses, ports and communities. Total number of entries can not exceed elementNumberTrapReceivers. An entry is deleted from … |
| 1.3.6.1.4.1.3715.99.1.3.5.1 | RowcontrolTrapReceiverEntry | not-accessible | optional | |
| 1.3.6.1.4.1.3715.99.1.3.5.1.1 | ColumnreceiverEntryId | read-only | mandatory | Unique table index. Makes possible to have several ip-address of 0.0.0.0 entries so that no mechanism for row manipulation of table is needed. |
| 1.3.6.1.4.1.3715.99.1.3.5.1.2 | ColumnreceiverAddress | read-write | mandatory | Ip address of the manager receiving Traps. |
| 1.3.6.1.4.1.3715.99.1.3.5.1.3 | ColumnreceiverPort | read-write | mandatory | Trap UDP port number. Default port is the standard trap port 162. |
| 1.3.6.1.4.1.3715.99.1.3.5.1.4 | ColumnreceiverCommunity | read-write | mandatory | Community string for the trap receiver. The agent is allowed to limit the length of the string. Minimum length of eight characters must be supported. Note: one… |
| 1.3.6.1.4.1.3715.99.1.3.6 | ScalarcontrolTrapSending | read-write | optional | Enables/disables trap sending. 1 = traps enabled 2 = traps disabled |
| 1.3.6.1.4.1.3715.99.1.3.7 | ScalarcontrolTrapInterval | read-write | optional | The minimum interval between traps. - Unit 10 milliseconds - Minimum value 0 (send as fast as possible) - Maximum value 1000 (10 seconds) - Default value is 10… |
| 1.3.6.1.4.1.3715.99.1.3.8 | ScalarcontrolTrapLifeTime | read-write | optional | The maximum time a trap stays in the trap queue waiting for sending. - Unit 1 second. - Minimum value 10 - Maximum value 300 - Default value 60 |
| 1.3.6.1.4.1.3715.99.1.3.9 | ScalarcontrolAlarmOnDelay | read-write | optional | The minimum time an object's alarm/warning condition must exist before it is recorded as an alarm/warning. Common to all alarms/warnings - Unit 10 ms - Minimum… |
| 1.3.6.1.4.1.3715.99.1.3.10 | ScalarcontrolAlarmOffDelay | read-write | optional | The minimum time an alarm/warning entry stays active after the object has reached it's normal condition. Common to all alarms/warnings. - Unit 10 ms - Minimum … |
| 1.3.6.1.4.1.3715.99.1.3.11 | ScalarcontrolTrapDelay | read-write | optional | The time before a trap is sent after an alarm is detected. - Unit 10 ms - Minimum value 10 (100 ms) - Maximum value 6000 (60 seconds) - Default value 500 (5 se… |
| 1.3.6.1.4.1.3715.99.1.4 | NodeelementProductKey | |||
| 1.3.6.1.4.1.3715.99.1.4.4 | ScalarproductKeyNumberOfKeys | read-only | optional | Number of product keys supported by the device. |
| 1.3.6.1.4.1.3715.99.1.4.5 | TableproductKeyTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.3715.99.1.4.5.1 | RowproductKeyEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.3715.99.1.4.5.1.1 | ColumnproductKeyIndex | read-only | mandatory | Product key index. |
| 1.3.6.1.4.1.3715.99.1.4.5.1.2 | ColumnproductKeyValue | read-write | mandatory | Product key value. |
| 1.3.6.1.4.1.3715.99.1.4.5.1.3 | ColumnproductKeyMask | read-only | mandatory | Product key mask. |
| 1.3.6.1.4.1.3715.99.1.4.5.1.4 | ColumnproductKeyStatus | read-only | mandatory | Product key status: 1(keyInvalid) = the key is invalid or missing 2(keyValid) = the key is valid |
| 1.3.6.1.4.1.3715.99.1.4.5.1.5 | ColumnproductKeyCipher | read-only | mandatory | Cipher method supported by this key: 1(cipherOther) = other ciphering is used 2(cipherBlowFish) = BlowFish ciphering is used 3(cipherXXTEA) = XXTEA ciphering i… |
| 1.3.6.1.4.1.3715.99.1.4.5.1.6 | ColumnproductKeyNumberOfFeatures | read-only | mandatory | Number of features available with this key. |
| 1.3.6.1.4.1.3715.99.1.4.6 | TableproductKeyFeatureTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.3715.99.1.4.6.1 | RowproductKeyFeatureEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.3715.99.1.4.6.1.1 | ColumnproductKeyFeatureIndex | read-only | mandatory | Feature index (second index). |
| 1.3.6.1.4.1.3715.99.1.4.6.1.2 | ColumnproductKeyFeatureName | read-only | mandatory | A human-readable description of the feature. |
| 1.3.6.1.4.1.3715.99.1.4.6.1.3 | ColumnproductKeyFeatureEnable | read-only | mandatory | Status of the feature: 1(featureDisable) = the feature si disabled in this device 2(featureEnable) = the feature is enabled in this devices |
| 1.3.6.1.4.1.3715.99.1.4.6.1.4 | ColumnproductKeyFeatureExpirationTime | read-only | mandatory | Number of days left before the feature expires. A zero value means infinite validity time. This object has a meaning only if the feature is enabled (productKey… |
| 1.3.6.1.4.1.3715.99.2 | Nodemodule | |||
| 1.3.6.1.4.1.3715.99.2.1 | NodemoduleInformation | |||
| 1.3.6.1.4.1.3715.99.2.1.1 | TablemoduleTable | not-accessible | mandatory | This table lists basic module identification and configuration data of modules installed inside the managed element. The first row in the table list informatio… |
| 1.3.6.1.4.1.3715.99.2.1.1.1 | RowmoduleEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.3715.99.2.1.1.1.1 | ColumnmoduleId | read-only | mandatory | An unique module index identifying the (physical) modules inside the network element. The exact conjunction between the index and the physical modules depends … |
| 1.3.6.1.4.1.3715.99.2.1.1.1.2 | ColumnmoduleName | read-write | optional | The identification name ('aliasname') of the module. |
| 1.3.6.1.4.1.3715.99.2.1.1.1.3 | ColumnmoduleHwType | read-only | mandatory | The hardware type name of the module. |
| 1.3.6.1.4.1.3715.99.2.1.1.1.4 | ColumnmoduleRackNo | read-write | optional | Rack number of the module. This can be used to identify the physical position of the module in the case where the agent manages modules that are in several rac… |
| 1.3.6.1.4.1.3715.99.2.1.1.1.5 | ColumnmoduleSlotNo | read-write | optional | Slot number of the module (within rack). |
| 1.3.6.1.4.1.3715.99.2.1.2 | TablemoduleDetailTable | not-accessible | mandatory | This table lists detailed module data of modules installed inside the element. The first row in the table list information about the element itself. If the ele… |
| 1.3.6.1.4.1.3715.99.2.1.2.1 | RowmoduleDetailEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.3715.99.2.1.2.1.1 | ColumnmoduleMacAddress | read-only | optional | Module MAC address. If the MAC address is unknown '00.00.00.00.00.00' is returned. |
| 1.3.6.1.4.1.3715.99.2.1.2.1.2 | ColumnmoduleBusAddress | read-only | optional | Module bus address. |
| 1.3.6.1.4.1.3715.99.2.1.2.1.3 | ColumnmoduleAppDate | read-only | mandatory | Module application software date. |
| 1.3.6.1.4.1.3715.99.2.1.2.1.4 | ColumnmoduleAppVersion | read-only | mandatory | Module application software version. If software version is undefined, then zero length string is returned. |
| 1.3.6.1.4.1.3715.99.2.1.2.1.5 | ColumnmoduleBiosDate | read-only | mandatory | Module BIOS date. |
| 1.3.6.1.4.1.3715.99.2.1.2.1.6 | ColumnmoduleBiosVersion | read-only | mandatory | Module BIOS version. If bios version is undefined, a zero length string is returned. |
| 1.3.6.1.4.1.3715.99.2.1.2.1.7 | ColumnmoduleHwSerialNumber | read-only | mandatory | Module serial number. |
| 1.3.6.1.4.1.3715.99.2.1.2.1.8 | ColumnmoduleHwVersion | read-only | mandatory | Module hardware version. |
| 1.3.6.1.4.1.3715.99.2.2 | NodemoduleStatus | |||
| 1.3.6.1.4.1.3715.99.2.2.1 | TablemoduleStatusTable | not-accessible | mandatory | This table contains status objects for modules inside the network element.The first row in the table lists information about the host module. If the element is… |
| 1.3.6.1.4.1.3715.99.2.2.1.1 | RowmoduleStatusEntry | not-accessible | mandatory | Row in moduleStatusTable. The index is moduleId from the moduleTable. Row in this table exist only if there is a row with the same moduleId in the moduleTable. |
| 1.3.6.1.4.1.3715.99.2.2.1.1.1 | ColumnstatusResetCause | read-only | mandatory | Reason for the last reset. If the reason is unknown, the value is reasonUnknown(1). If the device makes self reset and it can detect it, then value is reasonSe… |
| 1.3.6.1.4.1.3715.99.2.2.1.1.2 | ColumnstatusRunningSwImage | read-only | mandatory | Currently running software image number. Bios is 0, applications are numbered from 1..n, where n is the maximum image number. |
| 1.3.6.1.4.1.3715.99.2.2.1.1.3 | ColumnstatusInternalTemperature | read-only | mandatory | Device temperature, unit 0.1 deg C. Value is zero (0), if temperature is not available. |
| 1.3.6.1.4.1.3715.99.2.2.1.1.4 | ColumnstatusLidStatus | read-only | optional | Current lid status detected by the device. May or may not be the same variable as the elementLidStatus. |
| 1.3.6.1.4.1.3715.99.2.2.1.1.5 | ColumnstatusRestartCounter | read-only | optional | This objects counts the number of restarts of the module. A start can be a cold start or a warm start. |
| 1.3.6.1.4.1.3715.99.2.3 | NodemoduleControl | |||
| 1.3.6.1.4.1.3715.99.2.3.1 | TablemoduleControlTable | not-accessible | optional | This table contains common control commands for all the modules inside the element. |
| 1.3.6.1.4.1.3715.99.2.3.1.1 | RowmoduleControlEntry | not-accessible | optional | |
| 1.3.6.1.4.1.3715.99.2.3.1.1.1 | ColumncontrolLedUsage | read-write | optional | A variable to instruct how device LED's behave when the lid is closed. |
| 1.3.6.1.4.1.3715.99.2.3.1.1.2 | ColumncontrolMarkState | read-write | optional | A variable to instruct the device to start and stop showing mark (blinking module LED). On read requests returns the current mark state. |
| 1.3.6.1.4.1.3715.99.2.3.1.1.3 | ColumncontrolReset | read-write | optional | On write requests this object commands the module to reset itself. If softReset(3) or hardReset(2) can not be performed, then BAD VALUE error is returned. On r… |
| 1.3.6.1.4.1.3715.99.2.3.1.1.4 | ColumncontrolTempLimitHiHi | read-write | optional | Module temperature HiHi (high alarm) limit in 0.1 degC. |
| 1.3.6.1.4.1.3715.99.2.3.1.1.5 | ColumncontrolTempLimitHi | read-write | optional | Module temperature Hi (high warning) limit in 0.1 degC. |
| 1.3.6.1.4.1.3715.99.2.3.1.1.7 | ColumncontrolTempLimitLo | read-write | optional | Module temperature Lo (low warning) limit in 0.1 degC. |
| 1.3.6.1.4.1.3715.99.2.3.1.1.8 | ColumncontrolTempLimitLoLo | read-write | optional | Module temperature LoLo (low alarm) limit in 0.1 degC. |
| 1.3.6.1.4.1.3715.99.2.3.1.1.9 | ColumncontrolTempDeadBand | read-write | optional | Module temperature alarm/warning deadband in 0.1 degC. Common to all limit values (LoLo, Lo, Hi, HiHi). The deadband defines the difference between the 'ON' li… |
| 1.3.6.1.4.1.3715.99.2.3.1.1.10 | ColumncontrolInternalAppAccess | read-write | optional | This object defines whether the internal controller application is able to access the module parameters. This corresponds to the BXX module setting 'Allow Func… |
| 1.3.6.1.4.1.3715.99.2.3.1.1.11 | ColumncontrolLocalAccess | read-write | optional | This object defines whether the local user interface (buttons, knobs etc.) is enabled or disabled. Values: 1 = disabled, local UI is locked 2 = enabled, local … |
| 1.3.6.1.4.1.3715.99.2.3.2 | TablemoduleSWUpdateTable | not-accessible | optional | A table of software update control objects. |
| 1.3.6.1.4.1.3715.99.2.3.2.1 | RowmoduleSWUpdateEntry | not-accessible | optional | |
| 1.3.6.1.4.1.3715.99.2.3.2.1.1 | ColumnsWUpdateControl | read-write | optional | Writing value updateStart(4) commands the module to run a software update. The software image location and file name are specified in sWUpdateURL and sWUpdateF… |
| 1.3.6.1.4.1.3715.99.2.3.2.1.2 | ColumnswUpdateURL | read-write | optional | The URL where the software image can be downloaded. Format e.g. TFTP:\\downloads\swupdate\. |
| 1.3.6.1.4.1.3715.99.2.3.2.1.3 | ColumnsWUpdateFileName | read-write | optional | File name of the software image file to be downloaded. |
| 1.3.6.1.4.1.3715.99.2.3.2.1.4 | ColumnsWUpdateStatus | read-only | optional | Description of the software update result. After successful update this object should return a string 'Software updated successfully on <date and time>'. If th… |
| 1.3.6.1.4.1.3715.99.2.4 | NodemoduleRegistry | |||
| 1.3.6.1.4.1.3715.99.2.4.1 | TablemoduleSizeOfTable | not-accessible | optional | This table defines maximum number of entries in the registry tables. All the registry tables have fixed size defined in this table. |
| 1.3.6.1.4.1.3715.99.2.4.1.1 | RowmoduleSizeOfEntry | not-accessible | optional | |
| 1.3.6.1.4.1.3715.99.2.4.1.1.1 | ColumnsizeOfRegistry | read-only | mandatory | Max number of entries in the registryTable. The entries in the registryTable are numbered from 1..sizeofRegistry. |
| 1.3.6.1.4.1.3715.99.2.4.1.1.2 | ColumnsizeOfRepairlog | read-only | optional | Max number of entries in the repairlogTable. First entry (oldest entry) is deleted, when a new entry is added and the table is full. |
| 1.3.6.1.4.1.3715.99.2.4.1.1.3 | ColumnsizeOfNotebook | read-only | optional | Max number of entries in the notebookTable. The lines in the notebookTable are numbered from 1..sizeofNotebook. |
| 1.3.6.1.4.1.3715.99.2.4.2 | TablemoduleRegistryTable | not-accessible | optional | This table lists user data for all modules installed inside the element. Table is indexed by the moduleId and regIndex. regIndex can have values 1..sizeofRegis… |
| 1.3.6.1.4.1.3715.99.2.4.2.1 | RowmoduleRegistryEntry | not-accessible | optional | |
| 1.3.6.1.4.1.3715.99.2.4.2.1.1 | ColumnregIndex | read-only | optional | A second index to registryTable. Can have values 1..sizeofRegistryTable. |
| 1.3.6.1.4.1.3715.99.2.4.2.1.2 | ColumnregName | read-write | optional | Descriptive name for the parameter. The agent is allowed to limit the length of the name. Minimum length of eight characters must be supported. Writing empty s… |
| 1.3.6.1.4.1.3715.99.2.4.2.1.3 | ColumnregValue | read-write | optional | Textual information describing the parameter information. The agent is allowed to limit the length of the name. Minimum length of eight characters must be supp… |
| 1.3.6.1.4.1.3715.99.2.4.3 | TablemoduleRepairLogTable | not-accessible | optional | This table contains repair history entries for modules in the element. The table is indexed with moduleId and repairLogDate. The table can have sizeofRepairlog… |
| 1.3.6.1.4.1.3715.99.2.4.3.1 | RowmoduleRepairLogEntry | not-accessible | optional | Row entry in RepairLogTable. Note that it uses double index: moduleId repairIndex. that uniquely identify each log entry. Rows for particular module exist only… |
| 1.3.6.1.4.1.3715.99.2.4.3.1.1 | ColumnrepairIndex | read-only | optional | Row number of the Repairlog entry. Can have values between 1..sizeOfRepairlog. This field is a second index to moduleRepairLogTable. |
| 1.3.6.1.4.1.3715.99.2.4.3.1.2 | ColumnrepairDate | read-write | optional | Date of this repair entry formatted as CCYY-MM-DD. |
| 1.3.6.1.4.1.3715.99.2.4.3.1.3 | ColumnrepairReasonCode | read-write | optional | Repair code for this entry. |
| 1.3.6.1.4.1.3715.99.2.4.3.1.4 | ColumnrepairNameCode | read-write | optional | Repairer name code (initials) for this entry. |
| 1.3.6.1.4.1.3715.99.2.4.3.1.5 | ColumnrepairComment | read-write | optional | Comment of the repair event. The agent is allowed to truncate the length of the comment, if it is too long to internal storage. |
| 1.3.6.1.4.1.3715.99.2.4.4 | TablemoduleNotebookTable | not-accessible | optional | Notebook is a free text area for manager or serviceman notes. It is divided into 50 character long character blocks or lines. Each line is an entry in the note… |
| 1.3.6.1.4.1.3715.99.2.4.4.1 | RowmoduleNotebookEntry | not-accessible | optional | |
| 1.3.6.1.4.1.3715.99.2.4.4.1.1 | ColumnnotebookLineNumber | read-only | optional | The line number of the notebookTextLine. The number must be in between 1..sizeofNotebook. inclusive. Numbers should be used consecutively. |
| 1.3.6.1.4.1.3715.99.2.4.4.1.2 | ColumnnotebookLineText | read-write | optional | Text field for storing notes about the module. |