TERACOM-TCW121-MIB
99 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.38783 | Nodeteracom | |||
| 1.3.6.1.4.1.38783.1 | Nodeproduct | |||
| 1.3.6.1.4.1.38783.1.1 | Scalarname | read-only | mandatory | Name of product. e.g. teracom.net etc. |
| 1.3.6.1.4.1.38783.1.2 | Scalarversion | read-only | mandatory | Version string. e.g. 1.0 |
| 1.3.6.1.4.1.38783.1.3 | Scalardate | read-only | mandatory | Date of version |
| 1.3.6.1.4.1.38783.2 | Nodesetup | |||
| 1.3.6.1.4.1.38783.2.1 | Nodenetwork | |||
| 1.3.6.1.4.1.38783.2.1.1 | ScalardeviceIPAddress | read-write | mandatory | Device IP address |
| 1.3.6.1.4.1.38783.2.1.2 | ScalarsubnetMask | read-write | mandatory | Subnet Mask |
| 1.3.6.1.4.1.38783.2.1.3 | Scalargateway | read-write | mandatory | Gateway IP address |
| 1.3.6.1.4.1.38783.2.1.4 | ScalardeviceMACAddress | read-write | mandatory | Device MAC address |
| 1.3.6.1.4.1.38783.2.1.5 | ScalardhcpConfig | read-write | mandatory | DHCP configuration ON/OFF |
| 1.3.6.1.4.1.38783.2.1.6 | Scalardns | read-write | mandatory | Domain Name Server Address |
| 1.3.6.1.4.1.38783.2.1.7 | ScalarhostName | read-write | mandatory | Host Name |
| 1.3.6.1.4.1.38783.2.2 | Nodevlan | |||
| 1.3.6.1.4.1.38783.2.2.1 | ScalarvlanStatus | read-write | mandatory | VLAN Status ENABLED/DISABLED |
| 1.3.6.1.4.1.38783.2.2.2 | ScalarvlanId | read-write | mandatory | VLAN ID (0-4095) |
| 1.3.6.1.4.1.38783.2.3 | NodemacFilter | |||
| 1.3.6.1.4.1.38783.2.3.1 | ScalarfilterMACAddress1 | read-only | mandatory | filter1 MAC address |
| 1.3.6.1.4.1.38783.2.3.2 | ScalarfilterMACEnable1 | read-write | mandatory | MAC filter 1 Enable ENABLED/DISABLED |
| 1.3.6.1.4.1.38783.2.3.3 | ScalarfilterMACAddress2 | read-write | mandatory | filter2 MAC address |
| 1.3.6.1.4.1.38783.2.3.4 | ScalarfilterMACEnable2 | read-write | mandatory | MAC filter 2 Enable ENABLED/DISABLED |
| 1.3.6.1.4.1.38783.2.3.5 | ScalarfilterMACAddress3 | read-write | mandatory | filter3 MAC address |
| 1.3.6.1.4.1.38783.2.3.6 | ScalarfilterMACEnable3 | read-write | mandatory | MAC filter 3 Enable ENABLED/DISABLED |
| 1.3.6.1.4.1.38783.2.4 | NodesnmpSetup | |||
| 1.3.6.1.4.1.38783.2.4.1 | ScalarsnmpConfiguration | read-write | mandatory | SNMP Configuration ENABLED/DISABLED |
| 1.3.6.1.4.1.38783.2.4.2 | ScalartrapEnabled | read-write | mandatory | Indicates if this trap entry is enabled or not. |
| 1.3.6.1.4.1.38783.2.4.3 | ScalartrapReceiverIPAddress | read-write | mandatory | Trap receiver IP address |
| 1.3.6.1.4.1.38783.2.4.4 | ScalartrapCommunity | read-write | mandatory | Trap community to be used by agent to send trap |
| 1.3.6.1.4.1.38783.2.4.5 | ScalartrapInterval | read-write | mandatory | Trap Interval |
| 1.3.6.1.4.1.38783.2.4.6 | ScalarmaxNumberOfTraps | read-write | mandatory | Max Number of Traps |
| 1.3.6.1.4.1.38783.2.5 | Nodesensor1 | |||
| 1.3.6.1.4.1.38783.2.5.1 | Nodetemperature1 | |||
| 1.3.6.1.4.1.38783.2.5.1.1 | Scalartemperature1Min | read-write | mandatory | Temperature minimum |
| 1.3.6.1.4.1.38783.2.5.1.2 | Scalartemperature1Max | read-write | mandatory | Temperature maximum |
| 1.3.6.1.4.1.38783.2.5.1.3 | Scalartemperature1Hyst | read-write | mandatory | Temperature hysteresis |
| 1.3.6.1.4.1.38783.2.5.1.4 | Scalartemperature1Action | read-write | mandatory | Temperature Action |
| 1.3.6.1.4.1.38783.2.5.2 | Nodehumidity1 | |||
| 1.3.6.1.4.1.38783.2.5.2.1 | Scalarhumidity1Min | read-write | mandatory | Humidity minimum |
| 1.3.6.1.4.1.38783.2.5.2.2 | Scalarhumidity1Max | read-write | mandatory | Humidity maximum |
| 1.3.6.1.4.1.38783.2.5.2.3 | Scalarhumidity1Hyst | read-write | mandatory | Humidity hysteresis |
| 1.3.6.1.4.1.38783.2.5.2.4 | Scalarhumidity1Action | read-write | mandatory | Humidity Action |
| 1.3.6.1.4.1.38783.2.6 | Nodesensor2 | |||
| 1.3.6.1.4.1.38783.2.6.1 | Nodetemperature2 | |||
| 1.3.6.1.4.1.38783.2.6.1.1 | Scalartemperature2Min | read-write | mandatory | Temperature minimum |
| 1.3.6.1.4.1.38783.2.6.1.2 | Scalartemperature2Max | read-write | mandatory | Temperature maximum |
| 1.3.6.1.4.1.38783.2.6.1.3 | Scalartemperature2Hyst | read-write | mandatory | Temperature hysteresis |
| 1.3.6.1.4.1.38783.2.6.1.4 | Scalartemperature2Action | read-write | mandatory | Temperature Action |
| 1.3.6.1.4.1.38783.2.6.2 | Nodehumidity2 | |||
| 1.3.6.1.4.1.38783.2.6.2.1 | Scalarhumidity2Min | read-write | mandatory | Humidity minimum |
| 1.3.6.1.4.1.38783.2.6.2.2 | Scalarhumidity2Max | read-write | mandatory | Humidity maximum |
| 1.3.6.1.4.1.38783.2.6.2.3 | Scalarhumidity2Hyst | read-write | mandatory | Humidity hysteresis |
| 1.3.6.1.4.1.38783.2.6.2.4 | Scalarhumidity2Action | read-write | mandatory | Humidity Action |
| 1.3.6.1.4.1.38783.2.7 | NodeanalogInput | |||
| 1.3.6.1.4.1.38783.2.7.1 | Nodeinput1 | |||
| 1.3.6.1.4.1.38783.2.7.1.1 | Scalarvoltage1Min | read-write | mandatory | Voltage minimum |
| 1.3.6.1.4.1.38783.2.7.1.2 | Scalarvoltage1Max | read-write | mandatory | Voltage maximum |
| 1.3.6.1.4.1.38783.2.7.1.3 | Scalarvoltage1Hyst | read-write | mandatory | Voltage hysteresis |
| 1.3.6.1.4.1.38783.2.7.1.4 | Scalarvoltage1Action | read-write | mandatory | Voltage Action |
| 1.3.6.1.4.1.38783.2.7.1.5 | Scalarvoltage1Range | read-write | mandatory | Voltage Range |
| 1.3.6.1.4.1.38783.2.7.2 | Nodeinput2 | |||
| 1.3.6.1.4.1.38783.2.7.2.1 | Scalarvoltage2Min | read-write | mandatory | Voltage minimum |
| 1.3.6.1.4.1.38783.2.7.2.2 | Scalarvoltage2Max | read-write | mandatory | Voltage maximum |
| 1.3.6.1.4.1.38783.2.7.2.3 | Scalarvoltage2Hyst | read-write | mandatory | Voltage hysteresis |
| 1.3.6.1.4.1.38783.2.7.2.4 | Scalarvoltage2Action | read-write | mandatory | Voltage Action |
| 1.3.6.1.4.1.38783.2.7.2.5 | Scalarvoltage2Range | read-write | mandatory | Voltage Range |
| 1.3.6.1.4.1.38783.2.8 | NodedigitalInput | |||
| 1.3.6.1.4.1.38783.2.8.1 | ScalardigitalInput1Action | read-write | mandatory | Digital Input1 Action |
| 1.3.6.1.4.1.38783.2.8.2 | ScalardigitalInput2Action | read-write | mandatory | Digital Input1 Action |
| 1.3.6.1.4.1.38783.2.9 | Noderelay | |||
| 1.3.6.1.4.1.38783.2.9.1 | Scalarrelay1ControledBy | read-write | mandatory | Relay1 Control Item |
| 1.3.6.1.4.1.38783.2.9.2 | Scalarrelay2ControledBy | read-write | mandatory | Relay2 Control Item |
| 1.3.6.1.4.1.38783.2.9.3 | ScalarrelayPulseWidth | read-write | mandatory | Relay Pulse Width |
| 1.3.6.1.4.1.38783.2.10 | Noderecipients | |||
| 1.3.6.1.4.1.38783.2.10.1 | Scalarrecipient1EmailAddress | read-write | mandatory | Recipient1's e-mail address |
| 1.3.6.1.4.1.38783.3 | NodemonitorNcontrol | |||
| 1.3.6.1.4.1.38783.3.1 | ScalardigitalInput1State | read-only | mandatory | Digital1 Input State |
| 1.3.6.1.4.1.38783.3.2 | ScalardigitalInput2State | read-only | mandatory | Digital2 Input State |
| 1.3.6.1.4.1.38783.3.3 | Scalarrelay1State | read-write | mandatory | Relay1 State |
| 1.3.6.1.4.1.38783.3.4 | Scalarrelay1Pulse | read-write | mandatory | Relay1 Pulse |
| 1.3.6.1.4.1.38783.3.5 | Scalarrelay2State | read-write | mandatory | Relay2 State |
| 1.3.6.1.4.1.38783.3.6 | Scalarrelay2Pulse | read-write | mandatory | Relay2 Pulse |
| 1.3.6.1.4.1.38783.3.7 | Scalarvoltage1x10Int | read-only | mandatory | Voltage1 x10 in Integer format |
| 1.3.6.1.4.1.38783.3.8 | Scalarvoltage2x10Int | read-only | mandatory | Voltage2 x10 in Integer format |
| 1.3.6.1.4.1.38783.3.9 | Scalartemp1x10Int | read-only | mandatory | Temperature1 x10 in Integer format |
| 1.3.6.1.4.1.38783.3.10 | Scalartemp2x10Int | read-only | mandatory | Temperature2 x10 in Integer format |
| 1.3.6.1.4.1.38783.3.11 | Scalarhumi1x10Int | read-only | mandatory | Humidity1 x10 in Integer format |
| 1.3.6.1.4.1.38783.3.12 | Scalarhumi2x10Int | read-only | mandatory | Humidity2 x10 in Integer format |
| 1.3.6.1.4.1.38783.3.13 | ScalarconfigurationSaved | read-write | mandatory | Configuration save status SAVED/UNSAVED |
| 1.3.6.1.4.1.38783.3.14 | ScalarrestartDevice | read-write | mandatory | Restart Device |
| 1.3.6.1.4.1.38783.101 | NodetrcDigitalInput1State | This trap is sent each time when Digital Input 1 changes its state | ||
| 1.3.6.1.4.1.38783.102 | NodetrcDigitalInput2State | This trap is sent each time when Digital Input 1 changes its state | ||
| 1.3.6.1.4.1.38783.103 | NodetrcVoltage1x10Int | The voltage measured on Analog Input 1 entered alarm condition | ||
| 1.3.6.1.4.1.38783.104 | NodetrcVoltage2x10Int | The voltage measured on Analog Input 2 entered alarm condition | ||
| 1.3.6.1.4.1.38783.105 | NodetrcTemp1x10Int | Temperature 1 entered alarm condition | ||
| 1.3.6.1.4.1.38783.106 | NodetrcTemp2x10Int | Temperature 2 entered alarm condition | ||
| 1.3.6.1.4.1.38783.107 | NodetrcHumi1x10Int | Humidity 1 entered alarm condition | ||
| 1.3.6.1.4.1.38783.108 | NodetrcHumi2x10Int | Humidity 2 entered alarm condition | ||
| 1.3.6.1.4.1.38783.109 | NodetrcRestartDevice | Device restart |