MIB Viewer

TIMETRA-APS-MIB

56 objects
This document is the SNMP MIB module to manage and provision APS functionality for the Nokia SROS products. This includes extensions to the APS MIB defined in RFC 3498. Copyright 2004-2018 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
OIDNameAccessStatusDescription
1.3.6.1.4.1.6527.1.1.3.29IdentitytimetraAPSMIBModuleThis document is the SNMP MIB module to manage and provision APS functionality for the Nokia SROS products. This includes extensions to the APS MIB defined in …
1.3.6.1.4.1.6527.3.1.1.29NodetApsMIBConformance
1.3.6.1.4.1.6527.3.1.1.29.1NodetmnxApsMIBCompliances
1.3.6.1.4.1.6527.3.1.1.29.1.1CompliancetApsMIBComplianceobsoleteThe compliance statement for revision 1.0 of TIMETRA-APS-MIB.
1.3.6.1.4.1.6527.3.1.1.29.1.2CompliancetApsMIBComplianceV4v0obsoleteThe compliance statement for revision 4.0 of the Nokia SROS series systems.
1.3.6.1.4.1.6527.3.1.1.29.1.3CompliancetApsMIBComplianceV7v0obsoleteThe compliance statement for revision 7.0 of the Nokia SROS series systems.
1.3.6.1.4.1.6527.3.1.1.29.1.4CompliancetApsMIBComplianceV8v0obsoleteThe compliance statement for revision 8.0 of the Nokia SROS series systems.
1.3.6.1.4.1.6527.3.1.1.29.1.5CompliancetApsMIBComplianceV9v0currentThe compliance statement for release 9.0 of Nokia SROS series systems.
1.3.6.1.4.1.6527.3.1.1.29.2NodetmnxApsMIBGroups
1.3.6.1.4.1.6527.3.1.1.29.2.1GrouptmnxApsSwitchCommandcurrentThe group of objects for management of aps switch command applicable to the aps groups implementing linear APS 1+1 architecture.
1.3.6.1.4.1.6527.3.1.1.29.2.2GrouptmnxApsChanStatuscurrentThe group of objects for management of status information applicable to the APS channels implementing linear APS 1+1 architecture.
1.3.6.1.4.1.6527.3.1.1.29.2.3GrouptmnxApsNotificationsobsoleteA collection of SONET liner APS notifications.
1.3.6.1.4.1.6527.3.1.1.29.2.4GrouptmnxApsNotificationsV4v0currentA collection of SONET liner APS notifications for revision 4.0 of the Nokia SROS series systems.
1.3.6.1.4.1.6527.3.1.1.29.2.5GrouptmnxApsMcGroupcurrentThe group of objects for the configuration of a Multi-Chassis APS group.
1.3.6.1.4.1.6527.3.1.1.29.2.6GrouptmnxApsConfigGroupcurrentThe group of objects for the configuration of APS groups added for revision 7.0 of the Nokia SROS series systems.
1.3.6.1.4.1.6527.3.1.1.29.2.7GrouptmnxApsConfigV8v0GroupcurrentThe group of objects for the configuration of APS groups added for revision 8.0 of the Nokia SROS series systems.
1.3.6.1.4.1.6527.3.1.1.29.2.8GrouptmnxApsGroupCommandV9v0GroupcurrentThe group of APS group command objects for release 9.0 of Nokia SROS series systems.
1.3.6.1.4.1.6527.3.1.1.29.2.9GrouptmnxApsNotificationsV9v0GroupcurrentThe group of APS notifications for release 9.0 of Nokia SROS series systems.
1.3.6.1.4.1.6527.3.1.2.29NodetApsMIBObjs
1.3.6.1.4.1.6527.3.1.2.29.1TabletApsCommandTablenot-accessiblecurrentThis table augments the apsCommandTable of the APS-MIB
1.3.6.1.4.1.6527.3.1.2.29.1.1RowtApsCommandEntrynot-accessiblecurrentA conceptual row in the tApsCommandTable. This row exists only if the associated apsConfigEntry is active.
1.3.6.1.4.1.6527.3.1.2.29.1.1.1ColumntApsExerciseCommandResultread-onlycurrentStores the result of the last exercise command on the APS group and channel specified by the index values. When read this object returns 4(unknown) if no exerc…
1.3.6.1.4.1.6527.3.1.2.29.2TabletApsChanStatusTablenot-accessiblecurrentThis table augments the apsChanConfigTable of the APS-MIB. It contains status information in addition to those mentioned in apsChanStatusTable of the APS MIB.
1.3.6.1.4.1.6527.3.1.2.29.2.1RowtApsChanStatusEntrynot-accessiblecurrentA conceptual row in the tApsChanStatusTable. This row exists only if the associated apsChanConfigEntry exists.
1.3.6.1.4.1.6527.3.1.2.29.2.1.1ColumntApsChanTxLaisStateread-onlycurrentThe current state of the 7x50 APS forced Tx-LAIS on the specified APS channel. Note that the 7x50 products always receive and transmit on the same (active) APS…
1.3.6.1.4.1.6527.3.1.2.29.3TabletApsMcConfigTablenot-accessiblecurrentThis table augments the apsConfigTable of the APS-MIB.
1.3.6.1.4.1.6527.3.1.2.29.3.1RowtApsMcConfigEntrynot-accessiblecurrentA conceptual row in the tApsMcConfigTable. This row exists only if the associated apsConfigEntry is active.
1.3.6.1.4.1.6527.3.1.2.29.3.1.1ColumntApsMcNeighborAddrTyperead-writecurrentThe value of object tApsMcNeighborAddrType specifies the address type of the neighbor's IP address as specified by tApsMcNeighborAddr in the case of Multi-Chas…
1.3.6.1.4.1.6527.3.1.2.29.3.1.2ColumntApsMcNeighborAddrread-writecurrentThe value of tApsMcNeighborAddr variable specifies the neighbor's IP address only on a Multi-Chassis APS where the working and protect circuits are configured …
1.3.6.1.4.1.6527.3.1.2.29.3.1.3ColumntApsMcAdvertiseIntervalread-writecurrentThe value of tApsMcAdvertiseInterval specifies the time interval, in deciseconds, between 'I am operational' messages sent by both protect and working circuits…
1.3.6.1.4.1.6527.3.1.2.29.3.1.4ColumntApsMcHoldTimeread-writecurrentThe value of tApsMcHoldTime specifies how much time can pass, in 100s of milliseconds, without receiving an advertise packet from the neighbor before the Multi…
1.3.6.1.4.1.6527.3.1.2.29.4TabletApsMcStatusTablenot-accessiblecurrenttApsMcStatusTable augments the apsConfigTable of the APS-MIB. It contains status information in addition to those mentioned in apsStatusTable of the APS MIB.
1.3.6.1.4.1.6527.3.1.2.29.4.1RowtApsMcStatusEntrynot-accessiblecurrentA conceptual row in the tApsMcStatusTable. This row exists only if the associated apsConfigEntry exists.
1.3.6.1.4.1.6527.3.1.2.29.4.1.1ColumntApsMcApsCtlLinkStateread-onlycurrentThe value of tApsMcApsCtlLinkState indicates the current state of the 7x50 Multi-Chassis (MC) APS Group Control Link. Note that for a Single-Chassis APS group …
1.3.6.1.4.1.6527.3.1.2.29.5TabletApsConfigTablenot-accessiblecurrenttApsConfigTable augments the apsConfigTable of the APS-MIB. It contains configuration information in addition to those mentioned in apsConfigTable of the APS M…
1.3.6.1.4.1.6527.3.1.2.29.5.1RowtApsConfigEntrynot-accessiblecurrentA conceptual row in the tApsConfigTable. This row exists only if the associated apsConfigEntry exists.
1.3.6.1.4.1.6527.3.1.2.29.5.1.1ColumntApsProtectionTyperead-writecurrent
1.3.6.1.4.1.6527.3.1.2.29.5.1.2ColumntApsLineSFHoldTimeread-writecurrentThe value of tApsLineSFHoldTime specifies the time, in 100s of milliseconds, that the APS group will remain operational up before reporting a Line Signal Failu…
1.3.6.1.4.1.6527.3.1.2.29.5.1.3ColumntApsLineSDHoldTimeread-writecurrentThe value of tApsLineSDHoldTime specifies the time, in 100s of milliseconds, that the APS group will remain operational up before reporting a Line Signal Degra…
1.3.6.1.4.1.6527.3.1.2.29.5.1.4ColumntApsRdiAlarmGenerationread-writecurrentThe value of tApsRdiAlarmGeneration specifies the method used to generate RDI alarms on all levels (line, path) for the APS physical protecting/working ports r…
1.3.6.1.4.1.6527.3.1.2.29.6TabletApsGroupCommandTablenot-accessiblecurrenttApsGroupCommandTable augments APS-MIB::apsConfigTable. It contains command information in addition to the configuration information in APS-MIB::apsConfigTable.
1.3.6.1.4.1.6527.3.1.2.29.6.1RowtApsGroupCommandEntrynot-accessiblecurrentA conceptual row in tApsGroupCommandTable. This row exists only if the associated apsConfigEntry exists.
1.3.6.1.4.1.6527.3.1.2.29.6.1.1ColumntApsAnnexBCommandSwitchread-writecurrentThe value of tApsAnnexBCommandSwitch specifies the Annex B supported APS switch command applied to the APS group. The supported values: 'noCmd(1)' 'lockout(2)'…
1.3.6.1.4.1.6527.3.1.3.29NodetApsNotificationsPrefix
1.3.6.1.4.1.6527.3.1.3.29.0NodetApsNotifications
1.3.6.1.4.1.6527.3.1.3.29.0.1NotificationtApsModeMismatchClearcurrentThe tApsModeMismatchClear notification is generated when a mode mismatch condition, indicated by the 'modeMismatch(0)' bit of APS-MIB::apsStatusCurrent, is cle…
1.3.6.1.4.1.6527.3.1.3.29.0.2NotificationtApsChannelMismatchClearcurrentThe tApsChannelMismatchClear notification is generated when a channel mismatch condition, indicated by the 'channelMismatch(1)' bit of APS-MIB::apsStatusCurren…
1.3.6.1.4.1.6527.3.1.3.29.0.3NotificationtApsPSBFClearcurrentThe tApsPSBFClear notification is generated when a PSBF (Protection Switch Byte Failure) condition, indicated by the 'psbf(2)' bit of APS-MIB::apsStatusCurrent…
1.3.6.1.4.1.6527.3.1.3.29.0.4NotificationtApsFEPLFClearcurrentThe tApsFEPLFClear notification is generated when a FEPLF (Far-End Protection-Line Failure) condition, indicated by the 'feplf(3)' bit of APS-MIB::apsStatusCur…
1.3.6.1.4.1.6527.3.1.3.29.0.5NotificationtApsLocalSwitchCommandSetcurrentThe tApsLocalSwitchCommandSet is generated when any of the following APS switch commands are set on APS-MIB::apsCommandSwitch in the local node. The switch com…
1.3.6.1.4.1.6527.3.1.3.29.0.6NotificationtApsLocalSwitchCommandClearcurrentThe tApsLocalSwitchCommandClear notification is generated when an APS switch command in the local node gets cleared. Note that a switch command in the local no…
1.3.6.1.4.1.6527.3.1.3.29.0.7NotificationtApsRemoteSwitchCommandSetcurrentThe tApsRemoteSwitchCommandSet is generated when the received K1 byte (APS-MIB::apsStatusK1K2Rcv) from a peer indicates that an APS switch command just got set…
1.3.6.1.4.1.6527.3.1.3.29.0.8NotificationtApsRemoteSwitchCommandClearcurrentThe tApsRemoteSwitchCommandClear is generated when the received K1 byte (APS-MIB::apsStatusK1K2Rcv) from a peer indicates that an APS switch command just got c…
1.3.6.1.4.1.6527.3.1.3.29.0.9NotificationtApsMcApsCtlLinkStateChangecurrenttApsMcApsCtlLinkStateChange notification is generated when there is a change in the value of tApsMcApsCtlLinkState.
1.3.6.1.4.1.6527.3.1.3.29.0.10NotificationtApsChanTxLaisStateChangecurrenttApsChanTxLaisStateChange notification is generated when there is a change in the value of tApsChanTxLaisState.
1.3.6.1.4.1.6527.3.1.3.29.0.11NotificationtApsPrimaryChannelChangecurrenttApsPrimaryChannelChange notification is generated when there is a switch of the primary APS channel. Object apsStatusK1K2Trans indicates the new primary APS c…