TIMETRA-TC-MIB
576 objects
This document is the SNMP MIB module for the SNMP Textual Conventions (TCs) used in the Nokia SROS manageability instrumentation. Copyright 2003-2018 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressIPv6 InetAddressPrefixLength InetAddressType |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| TIMETRA-GLOBAL-MIB | timetraModules |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.1.1.2 | IdentitytimetraTCMIBModule | This document is the SNMP MIB module for the SNMP Textual Conventions (TCs) used in the Nokia SROS manageability instrumentation. Copyright 2003-2018 Nokia. Al… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AluNgeKeygroupIdOrZero | Unsigned32 (0..127) | current | A number used to identify an entry in the aluNgeKeygroupTable or zero. |
| BgpConnectRetryTime | Integer32 (1..65535) | current | The value of BgpConnectRetryTime is a time interval in seconds for a 'ConnectRetry' timer.default is 120 seconds. |
| BgpHoldTime | Integer32 (0 | 3..65535) | current | The value of BgpHoldTime is a time interval in seconds for Hold Timer. |
| BgpPeeringStatus | INTEGER { notApplicable (0), installed (1), notInstalled (2), noEnhancedSubmgt (3), wrongAntiSpoof (4), parentItfDown (5), hostInactive (6), noDualHomingSupport (7), invalidRadiusAttr (8), noDynamicPeerGroup (9), duplicatePeer (10), maxPeersReached (11), l2AwNotSupported (12), gtpNotSupported (13), genError (14) } | current | The status of the BGP peering session. |
| ClassIndex | Unsigned32 (1..255) | current | Source/Destination class index. |
| ClassIndexOrNone | Unsigned32 (0 | 1..255) | current | Source/Destination class index or none(0). |
| DateAndTimeOrEmpty | OCTET STRING (SIZE (0 | 8 | 11)) | current | An object of type DateAndTimeOrEmpty data type contains a date-time specification as in SNMPv2-TC::DateAndTime, or is empty |
| Dot1PPriority | Integer32 (-1 | 0..7) | current | IEEE 802.1p priority. zero is lowest, seven is highest. -1 means not set |
| Dot1PPriorityMask | Integer32 (0..7) | current | IEEE 802.1p priority mask. zero is lowest, seven is highest. |
| Dot1PPriorityNonZeroMask | Integer32 (1..7) | current | IEEE 802.1p priority mask. |
| InterfaceIndex | Integer32 | current | A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub- layer must r… |
| IpAddressPrefixLength | Integer32 (0..32) | current | the number of bits to match in an IP address mask. |
| IPv6FlowLabel | Integer32 (-1 | 0..1048575) | current | The flow identifier or Flow Label in an IPv6 packet header that may be used to discriminate traffic flows. (RFC3595). The value -1 indicates 'no flowLabel' |
| IPv6FlowLabelMask | Unsigned32 (0..1048575) | current | IPv6 flow label mask |
| LAGInterfaceNumber | Integer32 (1..800) | current | The unique number identifying a LAG interface. There are maximum 64 LAG interfaces, when the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5' (ESS-1/SR-1). |
| LAGInterfaceNumberOrZero | Integer32 (0 | 1..800) | current | LAGInterfaceNumberOrZero is similar to LAGInterfaceNumber but includes zero indicating invalid LAG identifier. |
| MciBoolean | INTEGER { mciTrue (1), mciFalse (2) } | current | This provides MCI type to for the objects which do not have well defined defaults |
| PwPortIdOrZero | Unsigned32 (0 | 1..32767) | current | PwPortIdOrZero indicates the range for pw port id's with 0 as the default value. |
| QTag | Integer32 (1..4094) | current | The QTag data type is a 12-bit integer tag used to identify a service. The values 0 and 4095 are not allowed. |
| QTagFullRange | Unsigned32 (0..4095) | current | The data type QTagFullRange represents a VLAN tag. A VLAN tag is 12 bits is size. The data type QTagFullRange covers the whole range of possible values. (0..4095 or 0x0 .. 0xFFF) |
| QTagFullRangeOrNone | Integer32 (-1 | 0..4095) | current | The data type QTagFullRangeOrNone represents a VLAN tag. A VLAN tag is 12 bits is size. The data type QTagFullRange covers the whole range of possible values. (0..4095 or 0x0 .. 0xFFF). The value '-1' indicates the abse… |
| QTagOrZero | Unsigned32 (0..4094) | current | The data type QTagOrZero represents a VLAN tag. The value '0' indicates that no VLAN tag is provisioned, or that its value is unknown. |
| SdpBindId | OCTET STRING (SIZE (8)) | current | The value used to uniquely identify an SDP Binding. The first four octets correspond to the zero-extended 16-bit SDP ID, while the remaining four octets correspond to the 32-bit VC ID, both encoded in network byte order. |
| ServiceAccessPoint | Integer32 (-1 | 0..255) | current | 802.2 LLC SAP value, Source and Destination. |
| ServiceAdminStatus | INTEGER { up (1), down (2) } | current | ServiceAdminStatus data type is an enumerated integer that describes the values used to identify the administrative state of a service. |
| ServiceOperStatus | INTEGER { up (1), down (2) } | current | ServiceOperStatus data type is an enumerated integer that describes the values used to identify the current operational state of a service. |
| SvcISID | Integer32 (-1 | 0..16777215) | current | The SvcISID specifies a 24 bit (0..16777215) service instance identifier for the service. As part of the Provider Backbone Bridging frames, it is used at the destination PE as a demultiplexor field. The value of -1 is u… |
| TAdaptationRule | INTEGER { max (1), min (2), closest (3) } | current | The adaptation rule to be applied to calculate the operational values for the specified entity. |
| TAdaptationRuleOverride | INTEGER { noOverride (0), max (1), min (2), closest (3) } | current | The adaptation rule to be applied to calculate the operational values for the specified entity. |
| TAdvCfgRate | Integer32 (0..100000000) | current | The PIR rate to be used in kbps. |
| TAnyQosPolicyID | Unsigned32 (1..4294967295) | current | The identification number of QoS policy. Any value greater than 65535 indicates the policy was created by the system. The format is: + |< + 31 0 where: A (16 bits) is the base policy identifier. B (4 bits) is the 'polic… |
| TAnyQosPolicyIDorZero | Unsigned32 (0 | 1..4294967295) | current | The identification number of QoS policy. Refer to the description of the textual convention TAnyQosPolicyID for more info on how this number is to be interpreted. |
| TAtmTdpDescrType | INTEGER { clp0And1pcr (0), clp0And1pcrPlusClp0And1scr (1), clp0And1pcrPlusClp0scr (2), clp0And1pcrPlusClp0scrTag (3) } | current | The TAtmTdpDescrType is an enumerated integer whose value indicates the types of cell loss priority to be used in conjunction with traffic parameters. The following values are outlined: Integer Value Interpretation clp0… |
| TBurstHundredthsOfPercent | Integer32 (0..10000) | current | The percentage of buffer space assigned to a queue that is reserved for some purpose, defined to two decimal places. |
| TBurstLimit | Integer32 (-1 | 1..14000000) | current | An explicit shaping burst size for a queue. The value of -1 specifies system default value. |
| TBurstLimitOverride | Integer32 (-2 | -1 | 1..14000000) | current | An explicit shaping burst size for a queue. or scheduler or aggregate-rate-limit. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. A value of -2 specifies no over… |
| TBurstPercent | Integer32 (0..100) | current | The percentage of buffer space assigned to a queue that is reserved for some purpose. |
| TBurstPercentOrDefault | Integer32 (-1 | 0..100) | current | The percentage of buffer space assigned to a queue that is reserved for some purpose. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. |
| TBurstPercentOrDefaultOverride | Integer32 (-2 | -1 | 0..100) | current | The percentage of buffer space assigned to a queue that is reserved for some purpose. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. A value of -2 specifies no … |
| TBurstSize | Integer32 (-1 | 0..1048576) | current | The amount of buffer space (in kbytes) assigned to a queue. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. |
| TBurstSizeBytes | Integer32 (-1 | 0..1073741824) | current | The amount of buffer space (in bytes) assigned to a queue. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. |
| TBurstSizeBytesOverride | Integer32 (-2 | -1 | 0..134217728) | current | The amount of buffer space (in bytes) assigned to a queue. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. A value of -2 specifies no override. |
| TBurstSizeBytesOvr | Integer32 (-2 | -1 | 0..1073741824) | current | The amount of buffer space (in bytes) assigned to a queue. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. A value of -2 specifies no override. |
| TBurstSizeOverride | Integer32 (-2 | -1 | 0..1048576) | current | The amount of buffer space (in kbytes) assigned to a queue. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. A value of -2 specifies no override. |
| TBWRateType | INTEGER { kbps (1), percentPortLimit (2), percentLocalLimit (3) } | current | The type of the PIR/CIR percent rate. The value 'kbps' means the rate is specified in kbps. The value 'percentPortLimit' means the rate is specified in percentage of port limit. The value 'percentLocalLimit' means the r… |
| TCIRPercentOverride | Integer32 (-2 | 0..10000) | current | The CIR percentage rate specified in centipercent. A value of -2 specifies no override. |
| TCIRRate | Integer32 (-1 | 0..100000000) | current | The CIR rate to be used in kbps. The value -1 means maximum rate. |
| TCIRRateOverride | Integer32 (-2 | -1 | 0..100000000) | current | The CIR rate to be used in kbps. The value -1 means maximum rate. A value of -2 specifies no override. |
| TClassBurstLimit | Integer32 (-1 | 1..327680) | current | An explicit shaping burst size for a class. The value -1 means that the actual value is derived from the corresponding class's default value. |
| TCpmFilterBurstSize | Integer32 (-1 | 0..131072) | current | The amount of buffer space (in kbytes) assigned to a queue. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. |
| TCpmProtPolicyID | Unsigned32 (0..255) | current | The data type TCpmProtPolicyID represents the identification number of a CPM Protection policy. The value '0' indicates that no CPM Protection policy is provisioned. |
| TCpmProtPolicyIDOrDefault | Integer32 (-1 | 1..255) | current | The data type TCpmProtPolicyIDOrDefault represents the identification number of a CPM Protection policy. The value of '-1' indicates the system determined default value. |
| TDEProfile | INTEGER { in (1), out (2), de (3) } | current | This textual convention specifies the profile marking of a packet. Value of 'in' specifies the in-profile marking. Value of 'out' specifies the out-profile marking. Value of 'de' specifies that the profile marking will … |
| TDEValue | Integer32 (-1 | 0..1) | current | This textual convention specifies the DE (Drop Eligible) bit value. The value of '-1' means DE value is not specified. |
| TDEWredSlopeProfile | INTEGER { in (1), out (2), de (3), exceed (4), inplus (5) } | current | This textual convention specifies the profile marking of a packet. Value of 'in' specifies the in-profile marking. Value of 'out' specifies the out-profile marking. Value of 'de' specifies that the profile marking will … |
| TDHCPFilterID | TFilterID | current | The identification number of a DHCP filter. |
| TDirection | INTEGER { both (0), ingress (1), egress (2) } | current | TDirection denotes a direction. |
| TDirectionIngEgr | INTEGER { ingress (1), egress (2) } | current | TDirectionIngEgr denotes a direction. |
| TDSCPFilterActionValue | Integer32 (-1 | 0..255) | current | The value of a Differential Services Code Point. -1 means not set. |
| TDSCPName | TNamedItem | current | The name of a Differential Services Code Point value. |
| TDSCPNameOrEmpty | TNamedItemOrEmpty | current | The name of a Differential Services Code Point value. |
| TDSCPValue | Integer32 (0..63) | current | The value of a Differential Services Code Point. |
| TDSCPValueOrNone | Integer32 (-1 | 0..63) | current | The value of a Differential Services Code Point (DSCP). A value of -1 means that no DSCP value is configured or available. |
| TEgrDynPolicerIdOrNone | Integer32 (0 | 1..63) | current | The data type describes the QoS dynamic policer identifier on egress side or zero when not specified. |
| TEgressHsmdaCounterId | Unsigned32 (1..8) | current | The identification number of a HSMDA egress counter. |
| TEgressHsmdaCounterIdOrZero | Unsigned32 (0 | 1..8) | current | The identification number of a HSMDA egress counter. The value 0 indicates an undefined counter id. |
| TEgressHsmdaPerPacketOffset | Integer32 (-64..31) | current | The value, in bytes, of the adjustment to make to the size of each outgoing packet for accounting. |
| TEgressHsmdaQueueId | Integer32 (0 | 1..8) | current | The value of TEgressHsmdaQueueId specifies the identification number of a HSMDA egress queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type… |
| TEgressPerPacketOffset | Integer32 (-64..31) | current | The value, in bytes, of the adjustment to make to the size of each packet for accounting. |
| TEgressPerPacketOffsetOvr | Integer32 (-128 | -64..31) | current | The value, in bytes, of the override for the adjustment to make to the size of each packet for accounting. A value of -128 indicates no override. |
| TEgressPolicerId | Integer32 (1..63) | current | The data type describes the QoS control policer identifier on egress side. |
| TEgressPolicerIdOrNone | Integer32 (0 | 1..63) | current | The data type describes the QoS control policer identifier on egress side or zero when not specified. |
| TEgressProfile | INTEGER { in (1), out (2), exceed (4), inplus (5) } | current | The profile marking of a packet. Value of 'in' specifies in-profile marking. Value of 'out' specifies out-profile marking. Value of 'none' specifies the profile marking of the packet will be inherited from the existing … |
| TEgressProfileOrNone | INTEGER { none (0), in (1), out (2), de (3), exceed (4), inplus (5) } | current | The profile marking of a packet. Value of 'in' specifies in-profile marking. Value of 'out' specifies out-profile marking. Value of 'de' specifies that the profile marking of the packet will be based on the DE (Drop-Eli… |
| TEgressQPerPacketOffset | Integer32 (-64..32) | current | The value, in bytes, of the adjustment to make to the size of each packet for accounting. |
| TEgressQueueId | Integer32 (0 | 1..8) | current | The value of TEgressQueueId specifies the identification number of an egress queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TEgressQu… |
| TEgrHsmdaPerPacketOffsetOvr | Integer32 (-128 | -64..31) | current | The value, in bytes, of the override of the adjustment to make to the size of each outgoing packet for accounting. A value of -128 indicates no override. |
| TEgrPolicerId | Integer32 (1..8) | current | The data type describes the QoS control policer identifier on egress side. |
| TEgrPolicerIdOrNone | Integer32 (0 | 1..8) | current | The data type describes the QoS control policer identifier on egress side or zero when not specified. |
| TEgrRateModType | INTEGER { none (1), aggRateLimit (2), namedScheduler (3) } | current | The data type TEgrRateModType represents the type of egress-rate modification that is to be applied. |
| TEntryId | TEntryIndicator (1..65535) | current | uniquely identifies an entry in a policy or filter table. to facilitate insertion of entries in the tables, we recommend assigning entry IDs by 10s: 10, 20, 30, etc. |
| TEntryIdOrZero | TEntryIndicator (0..65535) | current | uniquely identifies an entry in a policy or filter table. to facilitate insertion of entries in the tables, we recommend assigning entry IDs by 10s: 10, 20, 30, etc. The value 0, means that the object does not refer to … |
| TEntryIndicator | Unsigned32 (0..65535) | current | Uniquely identifies an entry in a policy or filter table. The value 0 is not a valid entry-id. When used as insertion point the value 0 indicates that entries must be inserted at the very beginning, i.e.before the first… |
| TExpSecondaryShaperClassRate | Integer32 (-1 | 1..10000000) | current | The expanded secondary shaper class PIR rate to be used in Kbps. The value -1 means maximum rate. |
| TExpSecondaryShaperPIRRate | Integer32 (-1 | 1..10000000) | current | The expanded secondary shaper PIR rate to be used in Kbps. The value -1 means maximum rate. |
| TFCName | TNamedItem | current | The name of a Forwarding Class entry. |
| TFCNameOrEmpty | TNamedItemOrEmpty | current | The name of a Forwarding Class entry. |
| TFCSet | BITS { be (0), l2 (1), af (2), l1 (3), h2 (4), ef (5), h1 (6), nc (7) } | current | This data type describes a set of Forwarding Classes. |
| TFCType | INTEGER { be (0), l2 (1), af (2), l1 (3), h2 (4), ef (5), h1 (6), nc (7) } | current | This data type enumerates the Forwarding Classes. |
| TFCTypeOrNone | INTEGER { none (-1), be (0), l2 (1), af (2), l1 (3), h2 (4), ef (5), h1 (6), nc (7) } | current | This data type enumerates the Forwarding Classes. |
| TFilterID | Unsigned32 (0..65535) | current | The identification number of a filter. 0 indicates an invalid filter-id. |
| TFIRRate | Integer32 (-1 | 1..100000000) | current | The static fair rate to be used in kbps. The value -1 means maximum rate. |
| TFrameType | INTEGER { e802dot3 (0), e802dot2LLC (1), e802dot2SNAP (2), ethernetII (3), atm (5) } | current | The type of the frame for which this mac filter match criteria is defined. |
| THPolCIRRate | Integer32 (-1 | 0..2000000000) | current | The CIR rate to be used in kbps. The value -1 means maximum rate. |
| THPolCIRRateOverride | Integer32 (-2 | -1 | 0..2000000000) | current | The CIR rate to be used in kbps. The value -1 means maximum rate. A value of -2 specifies no override. |
| THPolPIRRate | Integer32 (-1 | 1..2000000000) | current | The PIR rate to be used in kbps. The value -1 means maximum rate. |
| THPolPIRRateOverride | Integer32 (-2 | -1 | 1..2000000000) | current | The PIR rate to be used in kbps. The value -1 means maximum rate. A value of -2 specifies no override. |
| THPolVirtualScheCIRRate | Integer32 (-1 | 0..800000000) | current | The CIR rate to be used in kbps. The value -1 means maximum rate. |
| THPolVirtualSchePIRRate | Integer32 (-1 | 1..800000000) | current | The PIR rate to be used in kbps. The value -1 means maximum rate. |
| THsClassWeightOverride | Integer32 (-2 | 1 | 2 | 4 | 8) | current | The THsClassWeightOverride data type specifies the weight of the corresponding HS class feeding into its parent shaper. A value of -2 specifies no override. |
| THSMDABurstSizeBytes | Integer32 (-1 | 0..2688000) | current | The amount of buffer space (in bytes) assigned to a HSMDA queue. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. |
| THSMDABurstSizeBytesOverride | Integer32 (-2 | -1 | 0..2688000) | current | The amount of buffer space (in bytes) assigned to a HSMDA queue. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. A value of -2 specifies no override. |
| THsmdaCIRKRate | Integer32 (-1 | 0..100000000) | current | The HSMDA CIR rate to be used in Kbps. The value -1 means maximum rate. |
| THsmdaCIRKRateOverride | Integer32 (-2 | -1 | 0..100000000) | current | The HSMDA CIR rate to be used in Kbps. The value -1 means maximum rate. A value of -2 specifies no override. |
| THsmdaCIRMRate | Integer32 (-1 | 0..100000) | current | The HSMDA CIR rate to be used in Mbps. The value -1 means maximum rate. |
| THsmdaCIRMRateOverride | Integer32 (-2 | -1 | 0..100000) | current | The HSMDA CIR rate to be used in Mbps. The value -1 means maximum rate. A value of -2 specifies no override. |
| THsmdaCounterIdOrZero | Unsigned32 (0 | 1..8) | current | The identification number of a HSMDA counter. The value 0 indicates an undefined counter id. |
| THsmdaCounterIdOrZeroOrAll | Integer32 (-1 | 0 | 1..8) | current | The identification number of a HSMDA counter. The value (0) indicates an undefined counter id. The value (-1) is used to indicate all counters. |
| THsmdaPIRKRate | Integer32 (-1 | 1..100000000) | current | The HSMDA PIR rate to be used in Kbps. The value -1 means maximum rate. |
| THsmdaPIRKRateOverride | Integer32 (-2 | -1 | 1..100000000) | current | The HSMDA PIR rate to be used in Kbps. The value -1 means maximum rate. A value of -2 specifies no override. |
| THsmdaPIRMRate | Integer32 (-1 | 1..100000) | current | The HSMDA PIR rate to be used in Mbps. The value -1 means maximum rate. |
| THsmdaPIRMRateOverride | Integer32 (-2 | -1 | 1..100000) | current | The HSMDA PIR rate to be used in Mbps. The value -1 means maximum rate. A value of -2 specifies no override. |
| THsmdaPolicyIncludeQueues | INTEGER { q1to2 (1), q1to3 (2) } | current | The value of THsmdaPolicyIncludeQueues specifies which queues are to be scheduled in the same class in a HSMDA scheduler. |
| THsmdaPolicyScheduleClass | Integer32 (1..3) | current | The value of THsmdaPolicyScheduleClass the class at which the queues specified by THsmdaPolicyIncludeQueues in a HSMDA scheduler. |
| THSMDAQueueBurstLimit | Integer32 (-1 | 1..1000000) | current | An explicit shaping burst size of a HSMDA queue. The value -1 means that the actual value is derived from the corresponding queue's default value. |
| THsmdaSchedulerPolicyGroupId | Integer32 (0 | 1..2) | current | The value of THsmdaSchedulerPolicyGroupId specifies the identification number of a HSMDA scheduler policy group. A value of zero (0) indicates that no specific group identification has been assigned for this object. Whe… |
| THsmdaWeight | Integer32 (1..100) | current | The weight of the specified HSMDA entity while feeding into the parent. |
| THsmdaWeightClass | INTEGER { class1 (1), class2 (2), class4 (4), class8 (8) } | current | The weight of the specified HSMDA entity while feeding into the parent. |
| THsmdaWeightOverride | Integer32 (-2 | 1..100) | current | The weight of the specified HSMDA entity while feeding into the parent. A value of -2 specifies no override. |
| THsmdaWrrWeight | Integer32 (1..32) | current | The weight of the specified HSMDA entity while feeding into the parent. |
| THsmdaWrrWeightOverride | Integer32 (-2 | 1..32) | current | The weight of the specified HSMDA entity while feeding into the parent. A value of -2 specifies no override. |
| THsPirRate | Unsigned32 (1..100000 | 4294967295) | current | The HS PIR rate to be used in Mbps. The value of 4294967295(0xFFFFFFFF) means maximum rate. |
| THsPirRateOverride | Unsigned32 (1..100000 | 4294967294 | 4294967295) | current | The HS PIR rate to be used in Mbps. The value of 4294967295(0xFFFFFFFF) means maximum rate. The value of 4294967294(0xFFFFFFFE) means no override. |
| THsSchedulerPolicyGroupId | Integer32 (0 | 1) | current | The value of THsSchedulerPolicyGroupId specifies the identification number of a HS scheduler policy group. A value of zero (0) indicates that no specific group identification has been assigned for this object. When an o… |
| THsSchedulerPolicyWeight | Integer32 (1..127) | current | The weight of the specified HS entity while feeding into the parent. |
| THsSchedulerPolicyWeightOverride | Integer32 (-2 | 1..127) | current | The weight of the specified HS entity while feeding into the parent. A value of -2 specifies no override. |
| THsWrrWeightOvr | Integer32 (-2 | 1..127) | current | The THsWrrWeightOvr data type specifies the override weight of the corresponding HS queue feeding into its parent WRR scheduler. A value of -2 specifies no override. |
| TIcmpCodeOrNone | Integer32 (-1 | 0..255) | current | ICMP code. The value -1 means ICMP code is not set. |
| TIcmpTypeOrNone | Integer32 (-1 | 0..255) | current | ICMP type. The value -1 means ICMP type is not set. |
| TIngClassRemarkType | INTEGER { any (1), dot1pExp (2) } | current | The remarking to be used. |
| TIngDynPolicerIdOrNone | Integer32 (0 | 1..63) | current | The data type describes the QoS dynamic policer identifier on ingress side or zero when not specified. |
| TIngHsmdaPerPacketOffsetOvr | Integer32 (-128 | -32..31) | current | The value, in bytes, of the override of the adjustment to make to the size of each incoming packet for accounting. A value of -128 indicates no override. |
| TIngPolicerId | Integer32 (1..32) | current | The data type describes the QoS control policer identifier on ingress side. |
| TIngPolicerIdOrNone | Integer32 (0 | 1..32) | current | The data type describes the QoS control policer identifier on ingress side or zero when not specified. |
| TIngressHsmdaCounterId | Unsigned32 (1..8) | current | The identification number of a HSMDA ingress counter. |
| TIngressHsmdaCounterIdOrZero | Unsigned32 (0 | 1..8) | current | The identification number of a HSMDA ingress counter. The value 0 indicates an undefined counter id. |
| TIngressHsmdaPerPacketOffset | Integer32 (-32..31) | current | The value, in bytes, of the adjustment to make to the size of each incoming packet for accounting. |
| TIngressHsmdaQueueId | Integer32 (0 | 1..8) | current | The value of TIngressHsmdaQueueId specifies the identification number of a HSMDA ingress queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of ty… |
| TIngressPolicerId | Integer32 (1..63) | current | The data type describes the QoS control policer identifier on ingress side. |
| TIngressPolicerIdOrNone | Integer32 (0 | 1..63) | current | The data type describes the QoS control policer identifier on ingress side or zero when not specified. |
| TIngressQPerPacketOffset | Integer32 (-32..30) | current | The value, in bytes, of the adjustment to make to the size of each incoming packet for accounting. Only even values are supported. |
| TIngressQueueId | Integer32 (0 | 1..32) | current | The value of TIngressQueueId specifies the identification number of an ingress queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TIngres… |
| TIPFilterID | TFilterID | current | The identification number of an IP filter. |
| TIPFilterType | INTEGER { normal (1), vxlanVni (2), tagged-entries (3) } | current | A type containing the possible types of IP/IPv6 filters provided by the system. |
| TIpOption | Integer32 (0..255) | current | IP packet options octet. explanation of the octet bits: IP OPTION NUMBERS The Internet Protocol (IP) has provision for optional header fields identified by an option type field. Options 0 and 1 are exactly one octet whi… |
| TIpProtocol | Integer32 (-2 | -1 | 0..255) | current | IP protocol number. Well known protocol numbers include ICMP(1), TCP(6), UDP(17). -1 means value not set. -2 indicates protocol wildcard for UDP and TCP. |
| TIpProtocolNumber | Integer32 (0..255) | current | IP protocol number. Well known protocol numbers include ICMP(1), TCP(6), UDP(17). |
| TItemDescription | DisplayString (SIZE (0..80)) | current | Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
| TItemLongDescription | DisplayString | current | Longer description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
| TItemMatch | INTEGER { off (1), false (2), true (3) } | current | when set to off, the item is not matched. when set to false, packets without the item match the filter. when set to true, packets with the item match the filter. |
| TItemScope | INTEGER { exclusive (1), template (2) } | current | This textual convention determines some aspects of an item's behavior regarding creation and use, unused entry garbage collection, and automated promulgation by Element Management System to other systems in the service … |
| TLDisplayString | OCTET STRING (SIZE (0..1022)) | current | The TLDisplayString is DisplayString of 1022 characters. Any object defined using this syntax may not exceed 1022 characters in length. |
| TLevel | Integer32 (1..8) | current | The level of the specified entity while feeding into the parent. |
| TLevelOrDefault | Integer32 (0 | 1..8) | current | The level of the specified entity while feeding into the parent. The value 0 is used to denote a default value. |
| TLNamedItem | DisplayString (SIZE (1..64)) | current | The long name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TLNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT A… |
| TLNamedItemOrEmpty | DisplayString (SIZE (0|1..64)) | current | The long name of an item, or an empty string. When used in a reference (TLNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters, no UT… |
| TLPolicyNameOrExpOrEmpty | TLNamedItemOrEmpty | current | The long name of a policy statement or an expression or an empty string. A logical expression contains terms and operators and can contain sub-expressions enclosed in round brackets. A term is a string of type TPolicySt… |
| TLPolicyStatementNameOrEmpty | TLNamedItemOrEmpty | current | The long name of a policy statement, when an object refers to it. |
| TLspExpValue | Integer32 (-1 | 0..7) | current | MPLS Experimental bits. -1 means not set. |
| TMacFilterType | INTEGER { normal (1), isid (2), vid (3) } | current | A type containing the possible types of MAC filters provided by the system |
| TMatchCriteria | INTEGER { ip (1), mac (2), none (3) } | current | determines whether the entry matches traffic using IP match entries or MAC match entries. |
| TMaxDecRate | Integer32 (0 | 1..100000000) | current | The Advanced Configuration policy Max-Decrement rate to be used in kbps. |
| TMcFrQoSProfileId | Unsigned32 (0..65535) | current | This textual convention uniquely identifies Multi-class Frame relay QoS profiles in the ingress and egress multi-class frame relay QoS profile tables. The value 0 indicates a default QoS Profile as applicable to a given… |
| TMlpppQoSProfileId | Unsigned32 (0..65535) | current | This textual convention uniquely identifies MLPPP Bundle QoS profile in the ingress and egress MLPPP QoS profile tables. The value 0 indicates default MLPPP QoS Profile as applicable to a given H/W |
| TmnxAccessLoopEncapDataLink | INTEGER { aal5 (0), ethernet (1) } | current | The data type TmnxAccessLoopEncapDataLink specifies the data link used by the subscriber on the DSL access loop. |
| TmnxAccessLoopEncaps1 | INTEGER { notAvailable (0), untaggedEthernet (1), singleTaggedEthernet (2) } | current | The data type TmnxAccessLoopEncaps1 specifies the encapsulation used by the subscriber on the DSL access loop. |
| TmnxAccessLoopEncaps2 | INTEGER { notAvailable (0), pppoaLlc (1), pppoaNull (2), ipoaLlc (3), ipoaNull (4), ethernetOverAal5LlcFcs (5), ethernetOverAal5LlcNoFcs (6), ethernetOverAal5NullFcs (7), ethernetOverAal5NullNoFcs (8) } | current | The data type TmnxAccessLoopEncaps2 specifies the encapsulation used by the subscriber on the DSL access loop. |
| TmnxAccPlcyAACounters | BITS { any (0), sfa (1), nfa (2), sfd (3), nfd (4), saf (5), naf (6), spa (7), npa (8), sba (9), nba (10), spd (11), npd (12), sbd (13), nbd (14), sdf (15), mdf (16), ldf (17), tfd (18), tfc (19), sbm (20), spm (21), smt (22), nbm (23), npm (24), nmt (25), sfc (26), nfc (27) } | current | This data type describes a set of AA (Application Assurance) counters for which accounting data can be collected. The bits are defined as follows: any (0) - enables reporting when there is a change to any counter sfa (1… |
| TmnxAccPlcyAASubAttributes | BITS { appProfile (0), appServiceOption (1) } | current | This data type describes a set of AA (Application Assurance) subscriber attributes which must be included in accounting data. The bits are defined as follows: appProfile (0) - application profile appServiceOption (1) - … |
| TmnxAccPlcyOECounters | BITS { ipf (0), ipd (1), opf (2), opd (3), iof (4), iod (5), oof (6), ood (7) } | current | This data type describes a set egress counters for which accounting data can be collected associated with a given counter. |
| TmnxAccPlcyOICounters | BITS { apo (0), aoo (1), hpd (2), lpd (3), hod (4), lod (5), ipf (6), opf (7), iof (8), oof (9) } | current | This data type describes a set ingress counters for which accounting data can be collected associated with a given counter. |
| TmnxAccPlcyPolicerECounters | BITS { ipo (0), ipd (1), opo (2), opd (3), ioo (4), iod (5), ooo (6), ood (7), ucp (8), uco (9), ipf (10), iof (11), opf (12), oof (13), xpo (14), xpd (15), xpf (16), xoo (17), xod (18), xof (19), ppo (20), ppd (21), ppf (22), poo (23), pod (24), pof (25) } | current | This data type describes a set of egress counters for which accounting data can be collected associated with a given policer. ipo : In-profile Packets Offered ipd : In-profile Packets Discarded opo : Out-profile Packets… |
| TmnxAccPlcyPolicerICounters | BITS { ipo (0), ipd (1), opo (2), opd (3), ioo (4), iod (5), ooo (6), ood (7), ucp (8), uco (9), ipf (10), iof (11), opf (12), oof (13) } | current | This data type describes a set of ingress counters for which accounting data can be collected associated with a given policer. ipo : In-profile Packets Offered ipd : In-profile Packets Discarded opo : Out-profile Packet… |
| TmnxAccPlcyQECounters | BITS { ipf (0), ipd (1), opf (2), opd (3), iof (4), iod (5), oof (6), ood (7) } | current | This data type describes a set egress counters for which accounting data can be collected associated with a given queue. |
| TmnxAccPlcyQICounters | BITS { hpo (0), lpo (1), ucp (2), hoo (3), loo (4), uco (5), apo (6), aoo (7), hpd (8), lpd (9), hod (10), lod (11), ipf (12), opf (13), iof (14), oof (15) } | current | This data type describes a set ingress counters for which accounting data can be collected associated with a given queue. |
| TmnxActionType | INTEGER { doAction (1), notApplicable (2) } | current | The TmnxActionType data type is an enumerated integer that describes the values used to support action or operation style commands. Setting a variable of this type to 'doAction' causes the action to occur. GETs and GETN… |
| TmnxAddressAndMaskOrPrefixAddress | InetAddress | current | |
| TmnxAddressAndMaskOrPrefixMask | InetAddress | current | |
| TmnxAddressAndMaskOrPrefixPrefix | InetAddressPrefixLength | current | |
| TmnxAddressAndMaskOrPrefixType | InetAddressType | current | |
| TmnxAddressAndPrefixAddress | InetAddress | current | |
| TmnxAddressAndPrefixPrefix | InetAddressPrefixLength | current | |
| TmnxAddressAndPrefixType | InetAddressType | current | |
| TmnxAddressWithZoneAddress | InetAddress | current | |
| TmnxAddressWithZoneType | InetAddressType | current | |
| TmnxAdjacencySetFamilyType | INTEGER { ipv4 (0), ipv6 (1) } | current | The data type to specify Adjacency Set family. |
| TmnxAdminState | INTEGER { noop (1), inService (2), outOfService (3) } | current | The TmnxAdminState data type is an enumerated integer that describes the values used to identify the administratively desired state of functional modules. |
| TmnxAdminStateTruthValue | TruthValue | current | TmnxAdminStateTruthValue data type is an TruthValue object used to identify the administrative state of a snmp row. A value of 'true' means the snmp row is administrative 'up'. |
| TmnxAdminStateUpDown | INTEGER { up (1), down (2) } | current | TmnxAdminStateUpDown data type is an enumerated integer that describes the values used to identify the administrative state of a snmp row. |
| TmnxAiiType | INTEGER { aiiType1 (1), aiiType2 (2) } | current | TmnxAiiType indicates LDP FEC 129 Attachment Individual Identifier (AII) type. |
| TmnxAlgorithmId | Unsigned32 (0..255) | current | TmnxAlgorithmId identifies a specific Algorithm in the system. The value can indentify a defined IGP Algorithm (value 0 is SPF) or a Flexible Algorithm (range 128..255). |
| TmnxAncpString | DisplayString (SIZE (1..63)) | current | The TmnxAncpString data type contains a valid ancp string. |
| TmnxAncpStringOrZero | DisplayString (SIZE (0..63)) | current | The TmnxAncpStringOrZero data type contains a valid ancp string. An empty string indicates that no ANCP string is defined. |
| TmnxAppProfileString | DisplayString (SIZE (1..16)) | current | The data type TmnxAppProfileString denotes the application profile string. |
| TmnxAppProfileStringOrEmpty | DisplayString (SIZE (0..16)) | current | The data type TmnxAppProfileStringOrEmpty denotes the application profile string. The empty string denotes the absence of a application profile. |
| TmnxAsciiSpecification | DisplayString (SIZE (0..255)) | current | The data type TmnxAsciiSpecification is a format string that specifies how to form a target ASCII string. The format is as follows: <ascii-specification> ::= <char-specification>+ <char-specification> ::= <ascii-char> |… |
| TmnxAuthAlgorithm | INTEGER { null (1), md5 (2), sha1 (3), sha256 (4), sha384 (5), sha512 (6), aesXcbc (7), authEncryption (8) } | current | TmnxAuthAlgorithm data type is an enumerated integer that describes the values used to identify the hashing algorithm. Value Descriptions: null - Choosing this value configures the high-speed null algorithm, which does … |
| TmnxAuthPassword | DisplayString (SIZE (0..64)) | current | The TmnxAuthPassword data type contains a password used for authentication of subscribers. |
| TmnxBfdEncap | INTEGER { ipv4 (1) } | current | The TmnxBfdEncap data type is an enumerated integer indicating encapsulation used for in the BFD operation. |
| TmnxBfdIntfSessOperState | INTEGER { unknown (1), connected (2), broken (3), peerDetectsDown (4), notConfigured (5), noResources (6) } | current | The TmnxBfdIntfSessOperState data type is an enumerated integer that describes the values used to identify the operational state of a BFD session is relying upon for its fast triggering mechanism. |
| TmnxBfdOnLspSessFecType | INTEGER { rsvp (1), ldp (2), bgp (3), srTe (4), srPolicy (5) } | current | An object of type TmnxBfdOnLspSessFecType indicates the Forwarding Equivalence Class (FEC) type of a Bidirectional Forwarding Detection (BFD) session running on an LSP. |
| TmnxBfdSessionProtocols | BITS { ospfv2 (0), pim (1), isis (2), staticRoute (3), mcRing (4), rsvp (5), bgp (6), vrrp (7), srrp (8), mcep (9), ldp (10), ipsecTunnel (11), ospfv3 (12), mcIpsec (13), mcMobile (14), mplsTp (15), lag (16), opergrp (17), vccv (18), rsvpLsp (19), ldpLsp (20), bgpLsp (21), rip (22), ripng (23), mplsLsp (24), reserved25 (25), srPolicy (26), treeSid (27) } | current | This data type indicates what protocols are using a BFD session. |
| TmnxBfdSessOperFlags | BITS { noProtocols (0), noHeartBeat (1), echoFailed (2), nbrSignalDown (3), fwdPlaneReset (4), pathDown (5), nbrAdminDown (6), adminClear (7), misConnDefect (8) } | current | The value of TmnxBfdSessOperFlags indicates the reasons why a BFD session is not up. |
| TmnxBfdSessOperState | INTEGER { unknown (1), connected (2), broken (3), peerDetectsDown (4), notConfigured (5), noResources (6) } | current | The TmnxBfdSessOperState data type is an enumerated integer that describes the values used to identify the operational state of a BFD session the instance is relying upon for its fast triggering mechanism. |
| TmnxBfdSessProtocolState | INTEGER { adminDown (0), down (1), init (2), up (3) } | current | The TmnxBfdSessProtocolState data type is an enumerated integer that describes the state of the BFD protocol. |
| TmnxBfdTermination | INTEGER { iom (1), cpm (2), cpmNp (3), fp (4) } | current | The TmnxBfdTermination data type is an enumerated integer that indicates the termination of the BFD session as follows: 'iom (1)' - termination on the IOM card main processor, 'cpm (2)' - termination on the CPM card mai… |
| TmnxBgpAutonomousSystem | Integer32 (0..65535) | current | an autonomous system (AS) number. |
| TmnxBgpEvpnAcEthTag | Integer32 (0..16777215) | current | The TmnxBgpEvpnAcEthTag indicates ethernet tag value of the BGP EVPN attachment circuit. |
| TmnxBGPFamilyType | BITS { ipv4Unicast (0), ipv4Multicast (1), ipv4UastMcast (2), ipv4MplsLabel (3), ipv4Vpn (4), ipv6Unicast (5), ipv6Multicast (6), ipv6UcastMcast (7), ipv6MplsLabel (8), ipv6Vpn (9), l2Vpn (10), ipv4Mvpn (11), msPw (12), ipv4Flow (13), mdtSafi (14), routeTarget (15), mcastVpnIpv4 (16), mvpnIpv6 (17), ipv6Flow (18), evpn (19), bgpLs (20), mcastVpnIpv6 (21), srplcyIpv4 (22), srplcyIpv6 (23) } | current | The value of TmnxBGPFamilyType specifies the AFI-SAFI family for BGP peer. |
| TmnxBgpLocalPreference | Unsigned32 | current | a local route preference value. |
| TmnxBgpPreference | Unsigned32 (0..255) | current | a route preference value. |
| TmnxBgpRouteTarget | OCTET STRING (SIZE (1..32)) | current | TmnxBgpRouteTarget is an readable string that specifies the extended community name to be accepted by a Route Reflector Server or advertised by the router when reflecting any routes. I.e, it does not apply to routes tha… |
| TmnxBinarySpecification | DisplayString (SIZE (0..255)) | current | The data type TmnxBinarySpecification is a string of ASCII characters that specifies how to form a binary number. The format is as follows: <binary-specification> ::= <bit-specification>+ <bit-specification> ::= '0' | '… |
| TmnxBsxAaGrpPartIndexOrZero | Unsigned32 (0..16777215) | current | TmnxBsxAaGrpPartIndexOrZero is an index of an Application Assurance partition within an Application Assurance group, and is a unique 32-bit number encoded as follows. | 32 25 | 24 9 | 8 1 | + | 0 | partidx | groupidx| P… |
| TmnxBsxAarpId | Unsigned32 (1..65535) | current | TmnxBsxAarpId identifies an instance of the AA Redundancy Protocol (AARP). |
| TmnxBsxAarpIdOrZero | Unsigned32 (0 | 1..65535) | current | TmnxBsxAarpIdOrZero identifies an instance of the AA Redundancy Protocol (AARP). The value of '0' indicates an invalid AARP instance. |
| TmnxBsxAarpServiceRefType | INTEGER { none (0), dualHomed (1), shuntSubscriberSide (2), shuntNetworkSide (3), dualHomedSecondary (4) } | current | TmnxBsxAarpServiceRefType identifies the role of the SAP or Spoke SDP service point being referenced by an AARP instance. This reference is made in the context of a AARP instance identified by TmnxBsxAarpIdOrZero. The s… |
| TmnxBsxIsaAaGroupIndexOrZero | Unsigned32 (0..255) | current | TmnxBsxIsaAaGroupIndexOrZero is an index of a group of BSX MDAs. The value of zero indicates that no BSX MDA group is specified. |
| TmnxBsxTransitIpPolicyId | Unsigned32 (1..65535) | current | TmnxBsxTransitIpPolicyId identifies a transit IP policy. |
| TmnxBsxTransitIpPolicyIdOrZero | Unsigned32 (0 | 1..65535) | current | TmnxBsxTransitIpPolicyId identifies a transit ip policy. The value '0' indicates an invalid transit IP policy. |
| TmnxBsxTransPrefPolicyId | Unsigned32 (1..65535) | current | TmnxBsxTransPrefPolicyId identifies a transit prefix policy. |
| TmnxBsxTransPrefPolicyIdOrZero | Unsigned32 (0 | 1..65535) | current | TmnxBsxTransPrefPolicyId identifies a transit prefix policy. The value '0' indicates an invalid transit prefix policy. |
| TmnxCBFClasses | BITS { be (0), l2 (1), af (2), l1 (3), h2 (4), ef (5), h1 (6), nc (7), defaultLsp (8) } | current | The TmnxCBFClasses indicates a set of forwarding classes. |
| TmnxCdrDiagnosticAction | INTEGER { included (1), excluded (2) } | current | The TmnxCdrDiagnosticAction is an enumerated integer that describes whether the Diagnostics should be included or excluded in the Charging Data Record (CDR). |
| TmnxCdrType | INTEGER { pgwCdr (1), gCdr (2), eGCdr (3) } | current | The TmnxCdrType is an enumerated integer that describes the current charging type in Charging Data Record (CDR). pgwCdr - indicates Packet data network Gateway CDR gCdr - indicates Gateway GPRS Support Node (GGSN) CDR, … |
| TmnxCliEngine | INTEGER { classicCli (1), mdCli (2), systemDerived (3) } | current | The value of TmnxCliEngine specifies the CLI engine type. Values: classicCli (1) - Classic CLI engine. mdCli (2) - Model-Driven CLI engine. systemDerived (3) - Default value. CLI engine derived from system configuration… |
| TmnxCreateOrigin | INTEGER { manual (1), bgp-l2vpn (2), radius (3), bgpSignalL2vpn (4), multiSegmentPW (5), vplsPmsi (6), dynScript (7), bof (8), bgpSignalVpws (9), vsd (12), evpn (13), vsd-sd (14), satellites (15), fpe (16), evpnIsa (17), greBridged (18), tli (19), pdn (20), ipsec (23), esa (24), pfcpCups (25), manual-mci (26) } | current | The TmnxCreateOrigin indicates the entity that created the entry. |
| TmnxCustId | Unsigned32 (0 | 1..2147483647) | current | A number used to identify a Customer or Subscriber. This ID must be unique within the Service Domain. The value 0 is used as the null ID. |
| TmnxCustIdNoZero | Unsigned32 (1..2147483647) | current | A number used to identify a Customer or Subscriber. This ID must be unique within the Service Domain. |
| TmnxDataFormat | INTEGER { ascii (2), hex (3) } | current | The data type TmnxDataFormat represents how the input data is specified: - 'ascii (2)': the data contains seven-bit ASCII characters - 'hex (3)': the data contains octets. It must be displayed in hexadecimal format beca… |
| TmnxDayOfWeek | INTEGER { unspecified (0), sunday (1), monday (2), tuesday (3), wednesday (4), thursday (5), friday (6), saturday (7) } | current | The TmnxDayOfWeek is an enumerated integer that describes the day of the week. |
| TmnxDayOfWeekList | BITS { sunday (0), monday (1), tuesday (2), wednesday (3), thursday (4), friday (5), saturday (6) } | current | The TmnxDayOfWeekList describes days of the week in a bitset format. |
| TmnxDefInterDestIdSource | INTEGER { useString (1), useTopQTag (2), useVpi (3) } | current | The data type TmnxDefInterDestIdSource specifies what will be used as the default intermediate destination identifier. This value is used in case no other source (like RADIUS) provides an intermediate destination identi… |
| TmnxDefSubIdSource | INTEGER { useSapId (1), useString (2), useAutoId (3) } | current | The data type TmnxDefSubIdSource specifies what will be used as the default subscriber identification. This value is used in case no other source (like RADIUS) provides a subscriber identification string. If the value o… |
| TmnxDHCP6MsgType | INTEGER { dhcp6MsgTypeSolicit (1), dhcp6MsgTypeAdvertise (2), dhcp6MsgTypeRequest (3), dhcp6MsgTypeConfirm (4), dhcp6MsgTypeRenew (5), dhcp6MsgTypeRebind (6), dhcp6MsgTypeReply (7), dhcp6MsgTypeRelease (8), dhcp6MsgTypeDecline (9), dhcp6MsgTypeReconfigure (10), dhcp6MsgTypeInfoRequest (11), dhcp6MsgTypeRelayForw (12), dhcp6MsgTypeRelayReply (13), dhcp6MsgTypeLeasequery (14), dhcp6MsgTypeLeasequeryReply (15) } | current | The DHCP6 messagetype. |
| TmnxDhcpClientState | INTEGER { init (0), init-reboot (1), rebooting (2), selecting (3), requesting (4), rebinding (5), bound (6), renewing (7) } | current | The state of a DHCP client. |
| TmnxDhcpOptionDisplay | INTEGER { default (1), hexDuration (2), hexNetbiosNodeType (3), hexIpv4Address (4), hexIpv6Address (5) } | current | The data type TmnxDhcpOptionDisplay represents a hint of how the value of a DHCP option can be displayed: - 'default (1)' : display the option according to the type; - 'hexDuration (2)' : display the hex option as a dur… |
| TmnxDhcpOptionType | INTEGER { ipv4 (1), ascii (2), hex (3), ipv6 (4), domain (5) } | current | The data type TmnxDhcpOptionType represents how the value of this option is encoded: - 'ipv4 (1)' : this option contains an IPv4 address (4 octets) - 'ascii(2)' : this option contains seven-bit ASCII characters - 'hex (… |
| TmnxDhcpServerDUIDTypeCode | INTEGER { duidEnterprise (2), duidLinkLocal (3) } | current | The data type TmnxDhcpServerDUIDTypeCode represents the type code of the DHCP Unique Identifier (DUID) as specified by RFC 3315 section 9.1. |
| TmnxDiamCcFailureHndlng | INTEGER { terminate (1), continue (2), retryAndTerminate (3) } | current | The TmnxDiamCcFailureHndlng data type is an enumerated integer that describes the different actions that can be taken after a DCCA (Diameter Credit Control Application) session failure has occurred. |
| TmnxDisplayStringURL | DisplayString (SIZE (0..180)) | current | A string that represents an URL. If the URL contains login information in the form of 'username:password' this login information will be blanked out in the SNMP get response, by replacing the login information with '*:*… |
| TmnxDistCpuProtAction | INTEGER { discard (1), low-priority (2), none (3) } | current | The TmnxDistCpuProtAction data type is an enumerated integer that describes the values used to specify the action to be taken on the traffic when the filter entry matches. discard (1) packets matching the filter entry a… |
| TmnxDistCpuProtActionDuration | Integer32 (-1 | 0 | 1..10080) | current | An exceed action rate in seconds for Distributed CPU Protection Policy parameters determining hold-down duration for specified exceed-action. The value of 0 means no hold-down and value of -1 means indefinite hold-down … |
| TmnxDistCpuProtBurstSize | Integer32 (-1 | 0..4194304) | current | The amount of buffer space (in kilobytes) assigned to a queue by policer for Distributed CPU Protection Policy parameters. |
| TmnxDistCpuProtEnforceType | INTEGER { static (1), dynamic (2) } | current | The TmnxDistCpuProtEnforceType data type is an enumerated integer that describes the values used to specify the enforcement type. |
| TmnxDistCpuProtLogEventType | INTEGER { none (0), enable (1), verbose (2) } | current | The TmnxDistCpuProtLogEventType data type is an enumerated integer that describes the state of log events for Distributed CPU Protection Policy. none (0) indicates log events is disabled enable (1) indicates log events … |
| TmnxDistCpuProtPacketPolicerRateLimit | Integer32 (-1 | 0..8000) | current | A packet rate limit expressed in packets per second for Distributed CPU Protection Policy parameters. The value -1 means max rate. |
| TmnxDistCpuProtPacketRateLimit | Integer32 (-1 | 0..255) | current | A packet rate limit expressed in packets per second for Distributed CPU Protection Policy parameters. The value -1 means max rate. |
| TmnxDistCpuProtProtocolId | INTEGER { arp (1), dhcp (2), http-redirect (3), icmp (4), igmp (5), mld (6), ndis (7), pppoe-pppoa (8), all-unspecified (9), mpls-ttl (10), bfd-cpm (11), bgp (12), eth-cfm (13), isis (14), ldp (15), ospf (16), pim (17), rsvp (18), icmp-ping-check (19) } | current | The TmnxDistCpuProtProtocolId data type is an enumerated integer that indicates the protocols supported for the Distributed CPU Protection Policy. |
| TmnxDistCpuProtRate | Integer32 (-1 | 1..20000000) | current | A kbps limiting rate in kilobits per second for Distributed CPU Protection Policy parameters. The value -1 means max rate. |
| TmnxDistCpuProtRateType | INTEGER { packets (1), kbps (2) } | current | The TmnxDistCpuProtRateType data type is an enumerated integer that describes the rate type being applied by the policer for the Distributed CPU Protection Policy. |
| TmnxDistCpuProtState | INTEGER { exceed (1), conform (2), not-applicable (3) } | current | The TmnxDistCpuProtState data type is an enumerated integer that describes the state of the policer for the Distributed CPU Protection Policy. |
| TmnxEgrPolicerStatMode | INTEGER { noStats (0), minimal (1), offeredProfileNoCIR (2), offeredTotalCIR (3), offeredProfileCIR (4), offeredLimitedCappedCIR (5), offeredProfileCappedCIR (6), offeredTotalCirExceed (8), offeredFourProfileNoCir (9), offeredTotalCirFourProfile (10) } | current | TmnxEgrPolicerStatMode specifies the mode of statistics collected by this egress policer. |
| TmnxEgrPolicerStatModeOverride | INTEGER { noOverride (-1), noStats (0), minimal (1), offeredProfileNoCIR (2), offeredTotalCIR (3), offeredProfileCIR (4), offeredLimitedCappedCIR (5), offeredProfileCappedCIR (6), offeredTotalCirExceed (8), offeredFourProfileNoCir (9), offeredTotalCirFourProfile (10) } | current | TmnxEgrPolicerStatModeOverride specifies the override mode of statistics collected by this egress policer. |
| TmnxEnabledDisabled | INTEGER { enabled (1), disabled (2) } | current | The TmnxEnabledDisabled data type is an enumerated integer that describes the values used to identify whether an entity is 'enabled' or 'disabled'. |
| TmnxEnabledDisabledAdminState | INTEGER { enabled (1), disabled (2) } | current | The TmnxEnabledDisabledAdminState data type is an enumerated integer that describes the values used to identify whether an entity is 'enabled' or 'disabled'. It is to be used for admin state leafs. |
| TmnxEnabledDisabledOrInherit | INTEGER { enabled (1), disabled (2), inherit (3) } | current | The TmnxEnabledDisabledOrInherit data type is an enumerated integer that describes the values used to identify whether an entity is 'enabled', 'disabled' or inherits its state from another object that is usually in anot… |
| TmnxEnabledDisabledOrNA | INTEGER { enabled (1), disabled (2), notApplicable (3) } | current | An object of type TmnxEnabledDisabledOrNA indicates if an entity is enabled or disabled, or if enabled/disabled is not applicable to the entity. |
| TmnxEncapVal | Unsigned32 | current | The value of the label used to identify the entity using the specified encapsulation value on a specific port. The format of this object depends on the encapsulation type defined on this port. When the encapsulation is … |
| TmnxEncrAlgorithm | INTEGER { null (1), des (2), des3 (3), aes128 (4), aes192 (5), aes256 (6), aes128Gcm8 (7), aes128Gcm12 (8), aes128Gcm16 (9), aes192Gcm8 (10), aes192Gcm12 (11), aes192Gcm16 (12), aes256Gcm8 (13), aes256Gcm12 (14), aes256Gcm16 (15), nullAes128Gmac (16), nullAes192Gmac (17), nullAes256Gmac (18) } | current | TmnxEncrAlgorithm data type is an enumerated integer that describes the values used to identify the encryption algorithm. Value Descriptions: null - Choosing this value configures the high-speed null algorithm, which do… |
| TmnxEsaNum | Unsigned32 (0 | 1..16) | current | The TmnxEsaNum data type contains an identification number for an Extended Service Appliance. The value '0' indicates an invalid reference. |
| TmnxEsaVappNum | Unsigned32 (0 | 1..4) | current | The TmnxEsaVappNum type contains an identification number for the Virtual Application on an Extended Service Appliance. The value '0' indicates an invalid reference. |
| TmnxEvpnMHEthSegStatus | INTEGER { df (1), ndf (2), notesmanaged (3) } | current | The TmnxEvpnMHEthSegStatus data type is an enumerated integer that describes the status of an ethernet segment associated with the given SAP or SDP binding. |
| TmnxEvpnMultiHomingState | INTEGER { disabled (0), singleActive (1), singleActiveNoEsiLabel (2), allActive (3) } | current | The value of TmnxEvpnMultiHomingState indicates multi-homing state of the element. |
| TmnxExtServId | Unsigned32 (0 | 1..2147483647) | current | A number used to identify an external Service. This ID must be unique within the Service Domain. The value 0 is used as the null ID. |
| TmnxFilterProfileStringOrEmpty | DisplayString (SIZE (0..16)) | current | The data type TmnxFilterProfileStringOrEmpty denotes the filter profile string. The empty string denotes the absence of a filter profile. |
| TmnxFlexAlgoId | Unsigned32 (128..255) | current | TmnxFlexAlgoId identifies a specific Flexible Algorithm in the system. |
| TmnxFlexAlgoIdOrZero | Unsigned32 (0 | 128..255) | current | TmnxFlexAlgoId identifies a specific Flexible Algorithm in the system. The value '0' indicates that no Flexible Algorithm is specified. |
| TmnxFpeId | Unsigned32 (1..64) | current | The data type TmnxFpeId is a number that uniquely identifies a Forward Path Extension (FPE). |
| TmnxFpeIdOrZero | Unsigned32 (0..64) | current | The data type TmnxFpeIdOrZero is a number that either uniquely identifies a Forward Path Extension (FPE), or is equal to zero. |
| TmnxFPNumber | Unsigned32 (1..8) | current | The unique value that identifies the forwarding plane within a specific IOM card in the system. |
| TmnxFPNumberOrZero | Unsigned32 (0 | 1..8) | current | The unique value that identifies the forwarding plane within a specific IOM card in the system. Value 0 means this value is not applicable. |
| TmnxHigh32 | Unsigned32 | current | The upper 32 bits of a 64 bit value. |
| TmnxHttpRedirectUrl | DisplayString | current | A string that represents an HTTP URL configured for HTTP redirection. The string may contain a macro '$URL' that specifies substitution of '$URL' by another string; the origin of that string is documented where this tex… |
| TmnxIgmpGroupFilterMode | INTEGER { include (1), exclude (2) } | current | The data type TmnxIgmpGroupFilterMode describes the filter-mode of a group. In 'include(1)' mode, reception of packets sent to the specified multicast address is requested only from those IPv4 Source addresses listed in… |
| TmnxIgmpGroupType | INTEGER { static (1), dynamic (2), bgp-smet (3), bgp-sync (4) } | current | The data type TmnxIgmpGroupType describes how a multicast group is learned. |
| TmnxIgmpSnpgGroupType | INTEGER { static (1), dynamic (2), bgp-smet (3), bgp-sync (4) } | current | The data type TmnxIgmpSnpgGroupType describes how a multicast group is learned. |
| TmnxIgmpVersion | INTEGER { version1 (1), version2 (2), version3 (3) } | current | The data type TmnxIgmpVersion denotes the version of the IGMP protocol: - 'version1(1)': means version 1 of the IGMP protocol - 'version2(2)': means version 2 of the IGMP protocol - 'version3(3)': means version 3 of the… |
| TmnxIgpInstance | Unsigned32 (0..31 | 64..95) | current | An object of type TmnxIgpInstance identifies an instance of an Interior Gateway Protocol (IGP). Supported IGPs are Intermediate System to Intermediate System (IS-IS) and Open Shortest Path First (OSPF). The supported ra… |
| TmnxIgpSCFamilyType | INTEGER { ipv4 (0), ipv6 (1), srv4 (2), srv6 (3) } | current | The data type to specify IGP shortcut tunnel next hop family. |
| TmnxIkePolicyAuthMethod | INTEGER { psk (1), hybridX509XAuth (2), plainX509XAuth (3), plainPskXAuth (4), cert (5), pskRadius (6), certRadius (7), eap (8), autoEapRadius (9), autoEap (10) } | current | TmnxIkePolicyAuthMethod data type is an enumerated integer that describes the type of authentication method used. |
| TmnxIkePolicyAutoEapMethod | INTEGER { psk (1), cert (2), pskOrCert (3) } | current | TmnxIkePolicyAutoEapMethod data type is an enumerated integer that describes the type of fallback authentication method use in conjunction with the automatic EAP authentication method. |
| TmnxIkePolicyAutoEapOwnMethod | INTEGER { psk (1), cert (2) } | current | TmnxIkePolicyAutoEapOwnMethod data type is an enumerated integer that describes the type of fallback authentication method use in conjunction with the automatic EAP authentication method on its own side. |
| TmnxIkePolicyDHGroupOrZero | INTEGER { unspecified (0), group1 (1), group2 (2), group5 (5), group14 (14), group15 (15), group19 (19), group20 (20), group21 (21) } | current | TmnxIkePolicyDHGroupOrZero data type is similar to TmnxIkePolicyDHGroup but allows the value 'unspecified (0)'. |
| TmnxIkePolicyOwnAuthMethod | INTEGER { symmetric (0), psk (1), cert (5), eapOnly (8) } | current | TmnxIkePolicyOwnAuthMethod data type is an enumerated integer that describes the type of authentication method used for its own side. |
| TmnxIngPolicerStatMode | INTEGER { noStats (0), minimal (1), offeredProfileNoCIR (2), offeredTotalCIR (3), offeredPriorityNoCIR (4), offeredProfileCIR (5), offeredPriorityCIR (6), offeredLimitedProfileCIR (7), offeredProfileCappedCIR (8), offeredLimitedCappedCIR (9) } | current | TmnxIngPolicerStatMode specifies the mode of statistics collected by this ingress policer. |
| TmnxIngPolicerStatModeOverride | INTEGER { noOverride (-1), noStats (0), minimal (1), offeredProfileNoCIR (2), offeredTotalCIR (3), offeredPriorityNoCIR (4), offeredProfileCIR (5), offeredPriorityCIR (6), offeredLimitedProfileCIR (7), offeredProfileCappedCIR (8), offeredLimitedCappedCIR (9) } | current | TmnxIngPolicerStatModeOverride specifies the override mode of statistics collected by this ingress policer. |
| TmnxInternalSchedWeightMode | INTEGER { noOverride (1), default (2), forceEqual (3), offeredLoad (4), cappedOfferedLoad (5) } | current | The value of TmnxInternalSchedWeightMode specifies the weight-mode applied to queues using internal-scheduler. Various modes can be enumerated as follows: noOverride (1) - follows queue behavior specified at the card le… |
| TmnxIPsecDirection | INTEGER { inbound (1), outbound (2) } | current | TmnxIPsecDirection data type is an enumerated integer that describes the values used to identify the direction of an IPsec tunnel. |
| TmnxIpSecIsaOperFlags | BITS { adminDown (0), noActive (1), noResources (2), mcAdminDown (3) } | current | The value of TmnxIpSecIsaOperFlags specifies the operational flags that determine the status of the MDAs associated with IPsec ISA. |
| TmnxIPsecKeyingType | INTEGER { none (0), manual (1), dynamic (2) } | current | TmnxIPsecKeyingType data type is an enumerated integer that describes the values used to identify the IPsec keying type. |
| TmnxIPsecTunnelTemplateId | Unsigned32 (1..2048) | current | A number used to identify an entry in the tIPsecTnlTempTable. |
| TmnxIPsecTunnelTemplateIdOrZero | Unsigned32 (0..2048) | current | A number used to identify an entry in the tIPsecTnlTempTable or zero. |
| TmnxIpv4AddressAndMaskOrPrefixAddress | IpAddress | current | |
| TmnxIpv4AddressAndMaskOrPrefixMask | IpAddress | current | |
| TmnxIpv4AddressAndMaskOrPrefixPrefix | IpAddressPrefixLength | current | |
| TmnxIpv4AddressAndPrefixAddress | IpAddress | current | |
| TmnxIpv4AddressAndPrefixPrefix | IpAddressPrefixLength | current | |
| TmnxIpv6AddressAndMaskOrPrefixAddress | InetAddressIPv6 | current | |
| TmnxIpv6AddressAndMaskOrPrefixMask | InetAddressIPv6 | current | |
| TmnxIpv6AddressAndMaskOrPrefixPrefix | InetAddressPrefixLength | current | |
| TmnxIpv6AddressAndPrefixAddress | InetAddressIPv6 | current | |
| TmnxIpv6AddressAndPrefixPrefix | InetAddressPrefixLength | current | |
| TmnxIsaBbGrpId | Unsigned32 (0..4) | current | The TmnxIsaBbGrpId data type contains an identification number for an ISA-BB group. An ISA-BB group is a set of MDA of type 'isa-bb' that together performs a particular function such as NAT (Network Address Translation)… |
| TmnxIsaScalingProfile | INTEGER { profile1 (1), profile2 (2) } | current | TmnxIsaScalingProfile is an enumerated integer that specifies the ISA scaling profile. The meaning of each profile is explained in the customer documentation. ISA scaling profiles are only used in a virtual machine impl… |
| TmnxISID | Integer32 (0 | 1..16777215) | current | The TmnxISID specifies a 24 bit (1..16777215) service instance identifier for the service. As part of the Shortest Path Bridging (SPB) frames, it is used at the destination PE as a demultiplexor field. The value of 0 is… |
| TmnxIsidMFibStatus | BITS { ok (0), addPending (1), delPending (2), sysMFibLimit (3), useDefMCTree (4) } | current | The TmnxIsidMFibStatus data type describes the MFIB status of the ISID. |
| TmnxISIDNoZero | Integer32 (1..16777215) | current | The TmnxISID specifies a 24 bit (1..16777215) service instance identifier for the service. As part of the Shortest Path Bridging (SPB) frames, it is used at the destination PE as a demultiplexor field. |
| TmnxL2tpTunnelGroupName | DisplayString (SIZE (1..63)) | current | The TmnxL2tpTunnelGroupName data type contains a valid string to identify a Layer Two Tunneling Protocol Tunnel Group. |
| TmnxL2tpTunnelGroupNameOrEmpty | DisplayString (SIZE (0..63)) | current | The TmnxL2tpTunnelGroupNameOrEmpty data type contains a valid string to identify a Layer Two Tunneling Protocol Tunnel Group. An empty string indicates that no Tunnel Group is defined. |
| TmnxLagPerLinkHashClass | Integer32 (1..3) | current | The TmnxLagPerLinkHashClass is the class of traffic which along with the relative weight is used in the egress hashing on the LAG. |
| TmnxLagPerLinkHashClassOrNone | Integer32 (0..3) | current | The TmnxLagPerLinkHashClass is the class of traffic which along with the relative weight is used in the egress hashing on the LAG. |
| TmnxLagPerLinkHashWeight | Integer32 (1..1024) | current | The TmnxLagPerLinkHashWeight is the relative weight of the traffic which along with the class is used in the egress hashing on the LAG. |
| TmnxLdpFECType | INTEGER { addrWildcard (1), addrPrefix (2), addrHost (3), vll (128), vpws (129), vpls (130) } | current | TmnxLdpFECType determines the kind of FEC that the label mapping, withdraw, release and request messages are referring to. |
| TmnxLinkMapProfileId | Integer32 (1..64) | current | The data type TmnxLinkMapProfileId describes the link map profile identifier. |
| TmnxLinkMapProfileIdOrZero | Integer32 (0 | 1..64) | current | The data type TmnxLinkMapProfileId describes the link map profile identifier or zero. |
| TmnxLongDisplayString | OCTET STRING (SIZE (0..1024)) | current | The TmnxLongDisplayString indicates a long DisplayString. |
| TmnxLongDisplayStringLegacyBinary | OCTET STRING (SIZE (0..900)) | current | The TmnxLongDisplayString indicates a long DisplayString. |
| TmnxLongDisplayStringToBinary | TmnxLongDisplayString | current | The TmnxLongDisplayString indicates a long DisplayString. |
| TmnxLow32 | Unsigned32 | current | The lower 32 bits of a 64 bit value. |
| TmnxMacMask | OCTET STRING (SIZE (6)) | current | The TmnxMacMask is the 6 byte mask to provide the range of MAC addresses. |
| TmnxMacSpecification | DisplayString (SIZE (0..17)) | current | The data type TmnxMacSpecification is a string of ASCII characters that specifies how to format a string that represents a MAC address. The format is as follows: <mac-specification> ::= <alpha-string> [<delimiter-char>]… |
| TmnxManagedRouteStatus | INTEGER { installed (0), notYetInstalled (1), wrongAntiSpoofType (2), outOfMemory (3), shadowed (4), routeTableFull (5), parentInterfaceDown (6), hostInactive (7), enhancedSubMgmtRequired (8), deprecated1 (9), l2AwNotSupported (10), nextHopLimitExceeded (11), notApplicable (12), noNextHop (13), gtpNotSupported (14) } | current | The data type TmnxManagedRouteStatus denotes the status of a Managed Route. |
| TmnxMcIPsecDomainDesignatedRole | INTEGER { standby (1), active (2) } | current | TmnxMcIPsecDomainDesignatedRole indicates the designated role of a Multi-chassis IPsec Domain. |
| TmnxMcIPsecDomainId | Unsigned32 (1..255) | current | TmnxMcIPsecDomainId is an integer identifying a Multi-chassis IPsec Domain. |
| TmnxMdaQos | INTEGER { unknown (0), mda (1), hsmda1 (2), hsmda2 (3), hs (4) } | current | TmnxMdaQos is an enumerated integer whose value specifies the Quality of Service support of a Media Dependent Adapter (MDA). |
| TmnxMldGroupFilterMode | INTEGER { include (1), exclude (2) } | current | The data type TmnxMldGroupFilterMode describes the filter-mode of a group. In 'include(1)' mode, reception of packets sent to the specified multicast address is requested only from those IPv6 source addresses listed in … |
| TmnxMldGroupType | INTEGER { static (1), dynamic (2), bgp-smet (3), bgp-sync (4) } | current | The data type TmnxMldGroupType describes how a multicast group is learned. |
| TmnxMldVersion | INTEGER { version1 (1), version2 (2) } | current | The data type TmnxMldVersion denotes the version of the MLD protocol: - 'version1(1)': means version 1 of the MLD protocol - 'version2(2)': means version 2 of the MLD protocol |
| TmnxMlpppEpClass | INTEGER { null (0), local (1), ipv4Address (2), macAddress (3), magicNumber (4), directoryNumber (5) } | current | The TmnxMlpppEpClass type represents the address class of the MLPPP Endpoint Discriminator option. |
| TmnxMplsLabel | Unsigned32 (32..1048575) | current | The TmnxMplsLabel data type indicates range for MPLS label. |
| TmnxMplsLabelOrZero | Unsigned32 (0 | 32..1048575) | current | The TmnxMplsLabelOrZero data type indicates range for MPLS label. The value 0 indicates that no MPLS label is specified. |
| TmnxMplsLdpNgIdentifier | OCTET STRING (SIZE (0..18)) | current | The LDP identifier is a eighteen octet quantity which is used to identify a Label Switch Router (LSR) label space. When the LDP Id type is 'ipv4', the first four octets encode an IP address assigned to the LSR, and next… |
| TmnxMplsLdpNgIdType | INTEGER { ipv4 (1), ipv6 (2) } | current | A value that represents the type of LDP identifier ipv4(1) An IPv4 identifier type as defined by the InetAddressIPv4 textual convention. ipv6(2) An IPv6 identifier type as defined by the InetAddressIPv6 textual conventi… |
| TmnxMplsLspBandwidth | Unsigned32 (0..6400000) | current | The TmnxMplsLspBandwidth data type indicates maximum bandwidth range. |
| TmnxMplsLsrNgIdentifier | OCTET STRING (SIZE (16)) | current | The Label Switch Router (LSR) identifier is the first 16 bytes or the Router Id component of the IPv6 Label Distribution Protocol (LDP) identifier. |
| TmnxMplsTpGlobalID | Unsigned32 | current | The value of TmnxMplsTpGlobalID specifies the MPLS-TP global identifier. |
| TmnxMplsTpNodeID | Unsigned32 | current | The value of TmnxMplsTpNodeID specifies the MPLS-TP node identifier. |
| TmnxMplsTpTunnelType | INTEGER { mplsTpStatic (1) } | current | The type of this MPLS-TP tunnel entity. |
| TmnxMsPwPeSignaling | INTEGER { auto (1), master (2) } | current | A number used to identify a multi-segment pseudo-wire provider-edge signaling type. |
| TmnxMulticastAddrFamily | INTEGER { ipv4Multicast (0), ipv6Multicast (1) } | current | The data type TmnxMulticastAddrFamily denotes the family for multicast protocol. |
| TmnxNatIsaGrpId | Unsigned32 (1..4) | current | The TmnxNatIsaGrpId data type contains an identification number for a Network Address Translation Integrated Service Adaptor group. |
| TmnxNatIsaGrpIdOrZero | Unsigned32 (0..4) | current | The TmnxNatIsaGrpIdOrZero data type contains an identification number for a Network Address Translation Integrated Service Adaptor (ISA) group. The value zero means that no NAT ISA Group is defined. |
| TmnxNatL2AwAccessMode | INTEGER { auto (1), bridged (2) } | current | TmnxNatL2AwAccessMode is an enumerated integer that specifies the Layer-2-Aware NAT access mode. The value 'auto' means that the system automatically derives the access mode from the configuration (of the access SAP). |
| TmnxNatSubscriberType | INTEGER { l2AwareSub (1), classicLsnSub (2), dsliteLsnSub (3), nat64LsnSub (4) } | current | TmnxNatSubscriberType is an enumerated integer that specifies the NAT subscriber type. The possible values are 'classicLsnSub' and 'dsliteLsnSub' for classic and Dual Stack Lite Large Scale NAT subscribers respectively,… |
| TmnxNatSubscriberTypeOrNone | INTEGER { none (0), l2AwareSub (1), classicLsnSub (2), dsliteLsnSub (3), nat64LsnSub (4) } | current | TmnxNatSubscriberTypeOrNone is an enumerated integer that specifies the NAT subscriber type. The value 'none' indicates that NAT subscriber type is not specified. The values 'classicLsnSub' and 'dsliteLsnSub' are for cl… |
| TmnxNatWaterMark | Unsigned32 (0..100) | current | The TmnxNatWaterMark data type contains an unsigned number that marks a usage level in percent. The value zero means that no watermark is defined. |
| TmnxNetIngPlcyPolicerStatMode | INTEGER { noStats (0), offeredProfileWithDiscards (10) } | current | TmnxIngPolicerStatMode specifies the mode of statistics collected by this network ingress policer. |
| TmnxNhgDownReason | INTEGER { notApplicable (0), nextHopNotResolved (1), nextHopIsLocal (3), nextHopIsMcast (4), resTypeMismatch (5) } | current | The reason for next-hop group being operationally down. |
| TmnxOperGrpHoldDownTime | Unsigned32 (0..3600) | current | TmnxOperGrpHoldDownTime indicates time-interval in seconds for the service operational-group hold down time. |
| TmnxOperGrpHoldUpTime | Unsigned32 (0..3600) | current | TmnxOperGrpHoldUpTime indicates time-interval in seconds for the service operational-group hold uptime. |
| TmnxOperState | INTEGER { unknown (1), inService (2), outOfService (3), transition (4) } | current | The TmnxOperState data type is an enumerated integer that describes the values used to identify the current operational state of functional modules. |
| TmnxOspfInstance | Unsigned32 (0..127) | current | A number used to identify an instance of OSPF, For OSPFv2 only 0..31 is supported, For OSPFv3 the range is divided in address families as follows: 0..31 ipv6-unicast address family (supported) 32..63 ipv6-multicast addr… |
| TmnxPccRuleFilterForwardAction | INTEGER { none (0), forward (1), drop (2), redirUrl (3), redirNh (4), redirNhOrFwd (5) } | current | The TmnxPccRuleFilterForwardAction data type is an enumerated integer that specifies the filter action taken in a PCC rule. The value redirNhOrFwd (5) means: forward to the specified next hop, but if no next-hop ip addr… |
| TmnxPccRuleQosForwardAction | BITS { rateLimit (0), fcRemark (1), monitor (2), account (3), forward (4) } | current | The TmnxPccRuleQosForwardAction data type is an enumerated integer that specifies the qos action taken in a PCC rule. |
| TmnxPortID | Unsigned32 | current | |
| TmnxPppCpState | INTEGER { initial (1), starting (2), closed (3), stopped (4), closing (5), stopping (6), requestSent (7), ackReceived (8), ackSent (9), opened (10) } | current | The TmnxPppCpState data type is an enumerated integer that describes the current status of a PPP link. It can be applied to both LCP and NCP links. |
| TmnxPppNcpProtocol | INTEGER { ipcp (1), ipv6cp (2) } | current | The TmnxPppNcpProtocol data type represents the PPP Network Control Protocol. |
| TmnxPppoePadoDelay | Unsigned32 (0 | 1..30) | current | The data type TmnxPppoePadoDelay specifies the delay timeout in deciseconds before sending a PADO (PPPoE Active Discovery Offer). |
| TmnxPppoeSessionId | Unsigned32 (0..65535) | current | The TmnxPppoeSessionId indicates the 16 bit wide PPPoE session Id. |
| TmnxPppoeSessionInfoOrigin | INTEGER { none (0), default (1), radius (2), localUserDb (3), dhcp (4), midSessionChange (5), tags (6), l2tp (7), localPool (8), diameterNasreq (9), diameterGx (10), gtp (11), python (12), bonding (13) } | current | The TmnxPppoeSessionInfoOrigin indicates the originator of the provided information. |
| TmnxPppoeSessionType | INTEGER { local (1), localWholesale (2), localRetail (3), l2tp (4) } | current | The TmnxPppoeSessionType indicates the type of PPPoE session. |
| TmnxPppoeUserName | DisplayString (SIZE (1..253)) | current | The data type TmnxPppoeUserName denotes the PPPoE username. |
| TmnxPppoeUserNameOrEmpty | DisplayString (SIZE (0..253)) | current | The data type TmnxPppoeUserNameOrEmpty denotes the PPPoE username. |
| TmnxProxyEntryType | INTEGER { evpn (1), stat (2), dyn (3), dup (4) } | current | The TmnxProxyEntryType indicates type of proxy ARP or ND entry. |
| TmnxPwGlobalId | Unsigned32 (1..4294967295) | current | A number used to identify a global pseudo-wire routing identifier. |
| TmnxPwGlobalIdOrZero | Unsigned32 | current | A number used to identify a global pseudo-wire routing identifier or zero. |
| TmnxPwPathHopId | Unsigned32 (1..16) | current | A number used to identify a specific hop associated with pseudo-wire routing path. |
| TmnxPwPathHopIdOrZero | Unsigned32 (0..16) | current | A number used to identify a specific hop associated with pseudo-wire routing path. |
| TmnxQosBytesHex | OCTET STRING (SIZE (0..30)) | current | Represents the QoS bytes that has been requested for the bearer context of an User Equipment (UE). |
| TmnxQosMdAutoIDCount | Unsigned32 (0..65535) | current | This data type describes the count of policy IDs that has already been assigned for Qos objects. |
| TmnxQosMdAutoPolicyID | Unsigned32 (0 | 2..65535) | current | The identification number of a policy for Qos objects. This ID must be unique within the Qos Domain. The value 0 is used as the null ID. |
| TmnxQosRateHigh32 | TmnxHigh32 (0 | 1 | 4294967295) | current | The upper 32 bits of a 64 bit rate value. |
| TmnxQosRateLow32 | TmnxLow32 (0..4294967295) | current | The lower 32 bits of a 64 bit rate value. |
| TmnxRadiusFramedRouteMetric | Unsigned32 (0..65535) | current | The TmnxRadiusFramedRouteMetric data type is a number that represents the value of the metric in a RADIUS Framed-Route option Text field. |
| TmnxRadiusFramedRoutePreference | Unsigned32 (0..255) | current | The TmnxRadiusFramedRouteMetric data type is a number that represents the value of the preference in a RADIUS Framed-Route option Text field. |
| TmnxRadiusFramedRouteTag | Unsigned32 (0..4294967295) | current | The TmnxRadiusFramedRouteMetric data type is a number that represents the value of the tag in a RADIUS Framed-Route option Text field. |
| TmnxRadiusPendingReqLimit | Unsigned32 (1..4096) | current | The TmnxRadiusPendingReqLimit data type is a number that specifies the limit to the number of pending RADIUS request messages. |
| TmnxRadiusServerOperState | INTEGER { unknown (1), inService (2), outOfService (3), transition (4), overloaded (5), probing (6) } | current | The TmnxRadiusServerOperState data type is an enumerated integer that describes the values used to identify the operational state of a RADIUS server. |
| TmnxReasContextVal | Unsigned32 (0..31) | current | The value of the label used to identify the entity using the specified context value on a specific port. 31 0 + |00000000 00000000 00000000 000XXXXX| + The value of this object is encoded in the least significant 5 bits… |
| TmnxReferenceBandwidth | Unsigned32 (0..4000000000) | current | The TmnxRadiusPendingReqLimit data type is a number that specifies the reference bandwidth used for cost calculation. The formula is: Cost = reference-bandwidth / bandwidth. The unit is 1000 bps. The value zero specifie… |
| TmnxRipListenerStatus | INTEGER { notApplicable (0), active (1), inactive (2), noEnhancedSubmgt (3), wrongAntiSpoof (4), parentItfDown (5), hostInactive (6), l2AwNotSupported (7), gtpNotSupported (8), mcStandby (9), ripDisabled (10) } | current | The status of the RIP Listener session. |
| TmnxRipNgAuthKey | OCTET STRING (SIZE (0..16)) | current | The TmnxRipNgAuthKey TC defines the authentication key to be used when the authentication type has been configured to either simplePassword(2), md5(3) or md20(4) $feature (RIP_AUTH_EXTENSION) {or md16(5) or md5-20(6) }(… |
| TmnxRipNgAuthType | INTEGER { noAuthentication (1), simplePassword (2), md5 (3), md20 (4) } | current | The TmnxRipNgAuthType TC defines the authentication method to be used for RIP/RIP-NG. Allowed values are : noAuthentication(1) - No authentication method simplePassword(2) - Simple password based authentication md5(3) -… |
| TmnxRouteDistType | INTEGER { none (0), configured (1), derivedVpls (2), derivedEvi (3), auto (4), default (5) } | current | TmnxRouteDistType indicates the type of the route-distinguisher. |
| TmnxRouteTargetOrigin | INTEGER { none (0), configured (1), derivedVpls (2), derivedEvi (3), vsi (4) } | current | TmnxRouteTargetOrigin indicates the origin of the route-target policy. |
| TmnxRsvpDSTEClassType | Unsigned32 (0..7) | current | TmnxRsvpDSTEClassType is an unsigned integer in the range of (0..7) that defines the class type (CT). |
| TmnxRsvpSessionNameString | DisplayString (SIZE (0..160)) | current | The TmnxRsvpSessionNameString type indicates the RSVP session name which has extended from 80 to 160 characters. |
| TmnxSapAASubScope | INTEGER { none (0), subscriber (1), mac (2) } | current | The TmnxSapAASubScope data type is an enumerated integer that specifies the scope of the AA subscriber. Values: none (0) - The AA subscriber has no scope. subscriber (1) - The AA subscriber has esm subscriber scope. mac… |
| TmnxSapIngPolicerStatMode | INTEGER { noStats (0), minimal (1), offeredProfileNoCIR (2), offeredTotalCIR (3), offeredPriorityNoCIR (4), offeredProfileCIR (5), offeredPriorityCIR (6), offeredLimitedProfileCIR (7), offeredProfileCappedCIR (8), offeredLimitedCappedCIR (9), offeredProfileWithDiscards (10), offeredFourProfileWithDiscards (11) } | current | TmnxSapIngPolicerStatMode specifies the mode of statistics collected by this sap ingress policer. |
| TmnxScriptAuthType | INTEGER { none (0), cron (1), xmpp (2), event-script (3), vsd (4) } | current | The tmnxCliScriptAuthUserType datatype is an enumerated integer that indicates the type of module executing a CLI command script. |
| TmnxSecRadiusServAlgorithm | INTEGER { direct (1), round-robin (2) } | current | The TmnxSecRadiusServAlgorithm data type is an enumerated integer that indicates the algorithm used to access the list of configured RADIUS servers: - direct (1): The first server will be used as primary server for all … |
| TmnxServId | Unsigned32 (0 | 1..2147483647 | 2147483648 | 2147483649 | 2147483650 | 2147483651..2147483690 | 2147483691..2148007980 | 2148007981..2148012076 | 2148012077..2148016172 | 2148016173..2148278316 | 2148278317 | 2148278318..2148278381 | 2148278382 | 2148278382..2148278386) | current | A number used to identify a Service. This ID must be unique within the Service Domain. The value 0 is used as the null ID. |
| TmnxSlaProfileString | DisplayString (SIZE (1..32)) | current | The data type TmnxSlaProfileString denotes the SLA profile string. |
| TmnxSlaProfileStringOrEmpty | DisplayString (SIZE (0..32)) | current | The data type TmnxSlaProfileStringOrEmpty denotes the SLA profile string. The empty string denotes the absence of a SLA profile. |
| TmnxSlopeMap | INTEGER { none (0), low (1), high (2), highLow (3) } | current | TmnxSlopeMap indicates the mapping style of the slope. |
| TmnxSpbBridgePriority | Integer32 (0..15) | current | TmnxSpbFid indicates the bridge priority for Shortest Path Bridging. |
| TmnxSpbFdbLocale | INTEGER { local (1), sap (2), sdp (3), unknown (4) } | current | TmnxSpbFdbLocale data type is an enumerated integer that describes the values used to indicate source of forwarding database (FDB) entry for Shortest Path Bridging (SPB). |
| TmnxSpbFdbState | INTEGER { ok (0), addModPending (1), delPending (2), sysFdbLimit (3), noFateShared (4), svcFdbLimit (5), noUcast (6) } | current | TmnxSpbFdbState data type is an enumerated integer that describes the values used to indicate state of the forwarding database FDB entry for Shortest Path Bridging (SPB). |
| TmnxSpbFid | Integer32 (1..4095) | current | TmnxSpbFid indicates Shortest Path Bridging forwarding database identifier. |
| TmnxSpbFidOrZero | Integer32 (0..4095) | current | TmnxSpbFid indicates Shortest Path Bridging forwarding database identifier. |
| TmnxSpokeSdpId | Unsigned32 (1..4294967295) | current | A number used to identify a multi-segment pseudo-wire provider-edge identifier. |
| TmnxSpokeSdpIdOrZero | Unsigned32 | current | A number used to identify a multi-segment pseudo-wire provider-edge identifier. |
| TmnxSrrpPriorityStep | Integer32 (0..10) | current | TmnxSrrpPriorityStep indicates the range of the priority steps used by the operational group to monitor SRRP. |
| TmnxStatus | INTEGER { create (1), delete (2) } | current | The TmnxStatus data type is an enumerated integer that describes the values used to identify the current status of functional modules in the system such as OSPF and MPLS protocols. Setting this variable to 'create' caus… |
| TmnxStrSapId | DisplayString (SIZE (0..32)) | current | The value of TmnxStrSapId is a printable string which contains the owner SAP Id or equivalent on a remote system. The string should contain the printable string equivalent of the textual conventions TmnxPortID and TmnxE… |
| TmnxSubAcctSessionId | DisplayString (SIZE (0..22)) | current | The data type TmnxSubAcctSessionId contains a string that identifies a subscriber for the purposes of accounting. |
| TmnxSubAleOffset | INTEGER { none (0), pppoaLlc (1), pppoaNull (2), pppoeoaLlc (3), pppoeoaLlcFcs (4), pppoeoaLlcTagged (5), pppoeoaLlcTaggedFcs (6), pppoeoaNull (7), pppoeoaNullFcs (8), pppoeoaNullTagged (9), pppoeoaNullTaggedFcs (10), ipoaLlc (11), ipoaNull (12), ipoeoaLlc (13), ipoeoaLlcFcs (14), ipoeoaLlcTagged (15), ipoeoaLlcTaggedFcs (16), ipoeoaNull (17), ipoeoaNullFcs (18), ipoeoaNullTagged (19), ipoeoaNullTaggedFcs (20), pppoe (21), pppoeTagged (22), ipoe (23), ipoeTagged (24) } | current | The data type TmnxSubAleOffset specifies the encapsulation offset value of the subscriber in the DSL access loop as used by the 7xxx system. This offset is used in 7xxx egress shaping in order to accurately shape the en… |
| TmnxSubAleOffsetMode | INTEGER { none (0), auto (1) } | current | The data type TmnxSubAleOffsetMode specifies the way the encapsulation offset of the subscriber in the DSL access loop is learned by the 7xxx system. This offset is used in 7xxx egress shaping, adjusting the subscriber … |
| TmnxSubAuthPlcyUserNameOp | INTEGER { noOperation (0), appendDomain (1), stripDomain (2), replaceDomain (3), defaultDomain (4) } | current | The TmnxSubAuthPlcyUserNameOp data type is an enumerated integer that specifies the operation to perform on the user-name before sending it to the RADIUS server. |
| TmnxSubBondingConnIdOrEmpty | Unsigned32 (0 | 1..2) | current | The data type TmnxSubBondingConnId represents the index of the bonding connection. The value '0' means that index is not specified. |
| TmnxSubCallingStationIdType | INTEGER { sapString (1), mac (2), sapId (3), remoteId (4), llid (5) } | current | The TmnxSubCallingStationIdType data type is an enumerated integer that specifies what string will be put in the RADIUS or DIAMETER Calling-Station-Id attribute: - sapString (1): the value of TIMETRA-SAP-MIB::sapCalling… |
| TmnxSubCreditVolumeUnit | INTEGER { bytes (0), kilobytes (1), megabytes (2), gigabytes (3) } | current | The TmnxSubCreditVolumeUnit data type is an enumerated integer that specifies the unit in which the volume-credit is expressed. |
| TmnxSubHostGrouping | INTEGER { perSap (1), perGroup (2), perSessionPpp (3), perSessionIpoe (4) } | current | The TmnxSubHostGrouping data type is an enumerated integer that indicates the way hosts associated with a given subscriber and SAP are grouped together to share an SLA profile instance. |
| TmnxSubHostSessionLimitOverride | Integer32 (-2..131071) | current | The TmnxSubHostSessionLimitOverride data type is an integer that indicates the maximum number of hosts using.... The value -1 indicates that there is no limit The value -2 indicates that the AAA server did not specify a… |
| TmnxSubIdentShortString | DisplayString (SIZE (1..32)) | current | The data type TmnxSubIdentShortString denotes the short subscriber identification string. |
| TmnxSubIdentString | DisplayString (SIZE (1..64)) | current | The data type TmnxSubIdentString denotes the subscriber identification string. |
| TmnxSubIdentStringOrEmpty | DisplayString (SIZE (0..64)) | current | The data type TmnxSubIdentStringOrEmpty denotes the subscriber identification string. The empty string denotes the absence of a subscriber identification string. |
| TmnxSubMgtIntDestId | TmnxSubMgtIntDestIdOrEmpty (SIZE (1..32)) | current | The data type TmnxSubMgtIntDestId denotes the intermediate destination id. |
| TmnxSubMgtIntDestIdOrEmpty | DisplayString (SIZE (0..32)) | current | The data type TmnxSubMgtIntDestIdOrEmpty denotes the intermediate destination id. The empty string denotes the absence of an intermediate destination id. |
| TmnxSubMgtOrgString | TmnxSubMgtOrgStrOrZero (SIZE (1..32)) | current | The data type TmnxSubMgtOrgStrOrZero denotes the organization string. |
| TmnxSubMgtOrgStrOrZero | DisplayString (SIZE (0..32)) | current | The data type TmnxSubMgtOrgStrOrZero denotes the organization string. The empty string denotes the absence of an organization string. |
| TmnxSubNasPortPrefixType | INTEGER { none (0), userString (1) } | current | The TmnxSubNasPortPrefixType data type is an enumerated integer that specifies what prefix will be added to the RADIUS NAS-Port attribute: - none (0): No prefix will be added. - userString (1): A user configurable strin… |
| TmnxSubNasPortSuffixType | INTEGER { none (0), circuitId (1), remoteId (2) } | current | The TmnxSubNasPortSuffixType data type is an enumerated integer that specifies what suffix will be added to the RADIUS NAS-Port attribute: - none (0): No suffix will be added. - circuitId (1): If available, the circuit-… |
| TmnxSubNasPortTypeType | INTEGER { standard (1), config (2) } | current | The TmnxSubNasPortTypeType data type is an enumerated integer that specifies what value will be put in the NAS-Port-Type attribute of RADIUS or DIAMETER messages: - standard (1): according to the RADIUS specification RF… |
| TmnxSubOperSpiGroupId | Integer32 | current | The TmnxSubOperSpiGroupId data type is an integer that indicates the SLA profile instance group identifier specified by the AAA server. A value of minus one indicates that the AAA server did not specify such a group ide… |
| TmnxSubPfcpNodeIdDomainName | DisplayString (SIZE (0..255)) | current | A Fully Qualified Domain Name. |
| TmnxSubPfcpNodeIdType | INTEGER { none (0), useIpAddress (1), fqdn (2) } | current | The TmnxSubPfcpNodeIdType data type is an enumerated integer that describes the values used to identify a PFCP node. The value 'useIpAddress' means that an IP address is used. The value 'fqdn' means that a Fully Qualifi… |
| TmnxSubPfcpPeerNodeIdType | INTEGER { none (0), useIpAddress (1), reserved2 (2) } | current | The TmnxSubPfcpPeerNodeIdType data type is an enumerated integer that describes the values used to identify a PFCP peer node. The value 'useIpAddress' means that an IP address is used. The value 'fqdn' means that a Full… |
| TmnxSubPoolName | TLNamedItem | current | The name of a pool |
| TmnxSubProfileString | DisplayString (SIZE (1..32)) | current | The data type TmnxSubProfileString denotes the subscriber profile string. |
| TmnxSubProfileStringOrEmpty | DisplayString (SIZE (0..32)) | current | The data type TmnxSubProfileStringOrEmpty denotes the subscriber profile string. The empty string denotes the absence of a subscriber profile. |
| TmnxSubRadIsaServAlgorithm | INTEGER { direct (1), roundRobin (2), hashBased (3), directPriority (4) } | current | The TmnxSubRadIsaServAlgorithm data type is an enumerated integer that indicates the algorithm used to access the list of configured RADIUS servers: - direct (1): The first server will be used as primary server for all … |
| TmnxSubRadiusAttrType | Unsigned32 (0..255) | current | The TmnxSubRadiusAttrType data type contains a number that indicates a RADIUS attribute type. |
| TmnxSubRadiusDisplayString | DisplayString (SIZE (0..253)) | current | The TmnxSubRadiusOctetString data type contains a character string that corresponds to a Radius attribute. |
| TmnxSubRadiusOctetString | OCTET STRING (SIZE (253)) | current | The TmnxSubRadiusOctetString data type contains an octet string that corresponds to a Radius attribute |
| TmnxSubRadiusVendorId | Unsigned32 (0..16777215) | current | The TmnxSubRadiusVendorId data type contains a number that indicates a RADIUS Vendor-Id. |
| TmnxSubRadServAlgorithm | INTEGER { direct (1), roundRobin (2), hashBased (3) } | current | The TmnxSubRadServAlgorithm data type is an enumerated integer that indicates the algorithm used to access the list of configured RADIUS servers: - direct (1): The first server will be used as primary server for all req… |
| TmnxSubShcvAction | INTEGER { alarm (1), remove (2) } | current | The TmnxSubShcvAction data type is an enumerated integer that describes the values used to identify the action taken when Subscriber Host Connectivity Verification (SHCV) failed. |
| TmnxSubShcvInterval | Unsigned32 (0..6000) | current | The TmnxSubShcvInterval data type is a number that specifies the interval in minutes between connectivity checks. The value zero means no connectivity checking. |
| TmnxSubShcvRetryCount | Unsigned32 (2..29) | current | The TmnxSubShcvRetryTimeout data type is a number that specifies the number of connectivity check retransmissions. Setting the value to n specifies that, for any given host, at most (n+1) probes are done each interval, … |
| TmnxSubShcvRetryTimeout | Unsigned32 (10..60) | current | The TmnxSubShcvRetryTimeout data type is a number that specifies the timeout in seconds before a connectivity check retransmission. |
| TmnxSubShcvSrcIpOrigin | INTEGER { interface (1), vrrp (2) } | current | The TmnxSubShcvSrcIpOrigin data type is an enumerated integer that describes the values used to identify the origin of the source IP address used for connectivity verification in a layer-3 service (IES or VPRN). The val… |
| TmnxSubSlaMode | INTEGER { expanded (0), single (1) } | current | The TmnxSubSlaMode data type is an enumerated integer that specifies the handling of SLA profile instances for a subscriber. - Expanded sla-mode: a subscriber is allowed to have multiple SLA profile instances, using dif… |
| TmnxSubSpiGroupId | Integer32 (-1..65535) | current | The TmnxSubSpiGroupId data type is an integer that specifies the SLA profile instance group identifier. A value of minus one means that there is no group identifier configured. |
| TmnxSubTerminationType | INTEGER { local (1), localWholesale (2), localRetail (3) } | current | The TmnxSubTerminationType indicates how the subscriber host or session is terminated. |
| TmnxSubTerminationTypeOrZero | INTEGER { notApplicable (0), local (1), localWholesale (2), localRetail (3) } | current | The TmnxSubTerminationType indicates how the subscriber host or session is terminated. Zero indicates no subscriber host is terminated. |
| TmnxSvcEvi | Integer32 (1..65535) | current | The TmnxSvcEvi specifies an ethernet EVPN identifier value. |
| TmnxSvcEviOrZero | Integer32 (0..65535) | current | The TmnxSvcEviOrZero specifies an ethernet EVPN identifier value. Zero indicates no such value specified. |
| TmnxSvcEvpnMplsTransportType | INTEGER { invalid (0), local (1), static (2), rsvp (3), ldp (4), ospf (5), isis (6), bgp (7), srTe (8), udp (9), srPolicy (10), mplsFwdPolicy (11), ribApi (12), srOspf3 (13) } | current | The type of this transport entity. |
| TmnxSvcOperGrpCreationOrigin | INTEGER { manual (1), mvrp (2), dynScript (7), vsd (12) } | current | A number used to identify creation origin for the service operational group. |
| TmnxSyslogFacility | INTEGER { kernel (0), user (1), mail (2), systemd (3), auth (4), syslogd (5), printer (6), netnews (7), uucp (8), cron (9), authpriv (10), ftp (11), ntp (12), logaudit (13), logalert (14), cron2 (15), local0 (16), local1 (17), local2 (18), local3 (19), local4 (20), local5 (21), local6 (22), local7 (23) } | current | The value of TmnxSyslogFacility is an enumerated integer that specifies which syslog facility is the intended destination for the log event stream. |
| TmnxSyslogSeverity | INTEGER { emergency (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), debug (7) } | current | The value of TmnxSyslogSeverity is an enumerated integer that specifies the severity levels of syslog messages. |
| TmnxThresholdGroupType | INTEGER { brMgmtLimit (1), brMgmtCfSuccess (2), brMgmtCfFailure (3), brMgmtTraffic (4), pathMgmt (5), pdnConnections (6), mgIsmSystem (7) } | current | The TmnxThresholdGroupType is an enumerated integer that describes the group type in threshold based monitoring. brMgmtLimit - indicates the group for bearer management limit brMgmtCfSuccess - indicates the group for be… |
| TmnxTimeInSec | Unsigned32 (0..86400) | current | The data type TmnxTimeInSec describes the Tariff Time for the Charging Data Record (CDR). |
| TmnxTimeInterval | Unsigned32 | current | The TmnxTimeInterval data type is used anywhere the SNMPv2-TC TimeInterval TEXTUAL-CONVENTION can be used when an object requires longer intervals than 248 days. A period of time, measured in units of centiseconds. |
| TmnxTlsGroupId | Unsigned32 (1..4094) | current | A number used to identify a TLS Group. This ID must be unique within that Service Domain. |
| TmnxTreeSidOrigin | INTEGER { pcep (10), bgpSrPolicy (20), configuration (30) } | current | TmnxTreeSidOrigin identifies origin information for tree-sid feature. |
| TmnxTreeSidOwner | INTEGER { none (0), static (1), pce (2), srPol (3) } | current | TmnxTreeSidOwner identifies owner information for tree-sid feature. |
| TmnxTunnelGroupId | Unsigned32 (1..16) | current | The value of TmnxTunnelGroupId specifies the tunnel-group identifier. |
| TmnxTunnelGroupIdOrZero | Unsigned32 (0..16) | current | The value of TmnxTunnelGroupId specifies the tunnel-group identifier including zero indicating that group-id is not specified. |
| TmnxTunnelID | Unsigned32 | current | The identifying value for a BGP-VPRN tunnel. Depending on the tunnel type the associated tunnel id may be an sdp-id, an LSP ID or zero(0). |
| TmnxTunnelType | INTEGER { sdp (1), ldp (2), rsvp (3), gre (4), bypass (5), invalid (6), bgp (7) } | current | The type of this tunnel entity. |
| TmnxTunnelTypeExt | INTEGER { invalid (1), sdp (2), rsvp (3), ldp (4), ospf (5), isis (6), bypass (7), gre (8), bgp (9), srTe (10), fpe (11), udp (12), ospfV3 (13), mplsFwdPolicy (14), srPolicy (15), ribApi (16), reserved17 (17) } | current | The type of this tunnel entity. |
| TmnxUdpPort | Integer32 (0..65535) | current | The value of TmnxUdpPort is the port used to send messages to an event collector target. 514 is the IANA assigned port number for syslog. 162 is the IANA assigned port number for SNMP notifications. |
| TmnxUrpfCheckMode | INTEGER { strict (1), loose (2), strictNoEcmp (3) } | current | The TmnxUrpfCheckMode is the mode of operation of Unicast Reverse Path Forwarding (uRPF). A value of 'strict' means that uRPF checks if the incoming packet has a source address that matches a prefix in the routing table… |
| TmnxUserPassword | DisplayString (SIZE (0..60)) | current | The value of TmnxUserPassword indicates a password as a plaintext string, or as a bcrypt encrypted hash. The value of TmnxUserPassword cannot be more than 56 characters if it is a plaintext string. Any GET request on th… |
| TmnxUuid | OCTET STRING (SIZE (16)) | current | The value of TmnxUuid specifies the Universally Unique Identifier (UUID). The UUID consists of 32 hexadecimal digits. |
| TmnxVcId | Unsigned32 (1..4294967295) | current | A 32 bit number is used to identify a VC(Virtual Circuit). The VC ID cannot be 0. |
| TmnxVcIdOrNone | Unsigned32 (0 | 1..4294967295) | current | A 32 bit number is used to identify a VC(Virtual Circuit). A value of 0 indicates no VC ID is configured or available. |
| TmnxVcType | INTEGER { frDlciMartini (1), atmSdu (2), atmCell (3), ethernetVlan (4), ethernet (5), atmVccCell (9), atmVpcCell (10), ipipe (11), satopE1 (17), satopT1 (18), satopE3 (19), satopT3 (20), cesopsn (21), cesopsnCas (23), frDlci (25), mirrorDest (4096) } | current | The value of TmnxVcType is an enumerated integer that indicates a Virtual Circuit (VC) type. 'frDlciMartini(1)' replaces the old 'frDlci' when used over martini tunnels. |
| TmnxVdoAnalyzerAlarm | INTEGER { none (0), tnc (1), qos (2), poa (3) } | current | The data type TmnxVdoAnalyzerAlarm is an enumerated integer that specifies the severity of the analyzer state alarm. Setting a variable of this type to 'none' indicates no error level. A value of 'tnc' indicates a TNC (… |
| TmnxVdoAnalyzerAlarmStates | OCTET STRING (SIZE (10)) | current | |
| TmnxVdoFccServerMode | INTEGER { none (0), burst (1), dent (2), hybrid (3) } | current | The TmnxVdoFccServerMode data type is an enumerated integer that describes the mode of the Fast Channel Change (FCC) server. A value of 'burst' indicates that the FCC server is enabled and will send the channel at a nom… |
| TmnxVdoGrpId | Unsigned32 (0..4) | current | TmnxVdoGrpId data type describes the identifier for a video group. |
| TmnxVdoGrpIdIndex | Unsigned32 (1..4) | current | TmnxVdoGrpIdIndex data type describes the id of a TIMETRA-VIDEO-MIB::tmnxVdoGrpEntry and is the primary index for the table. |
| TmnxVdoGrpIdOrInherit | Integer32 (-1 | 0..4) | current | The data type describes the identifier for a video group. A value of '-1' indicates that identifier will be inherited from another object that is usually in another mib table. |
| TmnxVdoIfName | TNamedItem | current | The data type describes the name of a video interface. The name of a video interface must always start with a letter. |
| TmnxVdoOutputFormat | INTEGER { udp (1), rtp-udp (2) } | current | The data type TmnxVdoOutputFormat is an enumerated integer that specifies the output format of the video stream. Setting a variable of this type to 'udp' causes the video stream to be of type 'udp' whereas setting a val… |
| TmnxVdoPortNumber | Unsigned32 (1024..5999 | 6251..65535) | current | The data type describes the port number of an Internet transport layer protocol. |
| TmnxVdoStatInt | INTEGER { current (1), interval (2) } | current | The data type TmnxVdoStatInt is an enumerated integer that specifies the time duration for which the video statistics are being counted. Setting a variable of this type to 'current' causes the time duration to be set to… |
| TmnxVeId | Integer32 (-1 | 1..65535) | current | The TmnxVeId is the vpls-edge-range. |
| TmnxVni | Unsigned32 (1..16777215) | current | The TmnxVni data type indicates range for VNI. |
| TmnxVniOrZero | Unsigned32 (0..16777215) | current | The TmnxVni data type indicates range for VNI. |
| TmnxVpnIpBackupFamily | BITS { ipv4 (0), ipv6 (1) } | current | The value of TmnxVpnIpBackupFamily specifies the respective vpn family for which backup paths would be enabled. |
| TmnxVPNRouteDistinguisher | OCTET STRING (SIZE (8)) | current | The VPRN route distinguisher is a 8-octet object. It contains a 2-octet type field followed by a 6-octet value field. The type field specify how to interpret the value field. Type 0 specifies two subfields as a 2-octet … |
| TmnxVRtrID | Integer32 (1..10240) | current | A number used to identify a virtual router instance in the system. |
| TmnxVRtrIDOrZero | Integer32 (0..10240) | current | A number used to identify a virtual router instance in the system. The number 0 will have special significance in the context the TC is used. |
| TmnxVRtrMplsLspID | Unsigned32 (0..65535 | 65536..131070) | current | A unique value for each Label Switched Path in the managed system. The higher range IDs are used for segment routing LSPs. The lower range IDs are used for regular LSPs. |
| TmnxVRtrMplsLspIDNoZero | Unsigned32 (1..65535 | 65536..131070) | current | A unique value, greater than zero, for each Label Switched Path in the managed system. The higher range IDs are used for segment routing LSPs. The lower range IDs are used for regular LSPs. |
| TmnxVxlanInstance | Unsigned32 (1) | current | The TmnxVxlanInstance data type indicates range for the VXLAN instance. |
| TmnxWaveKey | Unsigned32 (0..4095) | current | |
| TmnxWlanGwIsaGrpId | Unsigned32 (1..4) | current | The TmnxWlanGwIsaGrpId data type contains an identification number for a Wireless Local Access Network Gateway Integrated Service Adaptor group. |
| TmnxWlanGwIsaGrpIdOrZero | Unsigned32 (0..4) | current | The TmnxWlanGwIsaGrpIdOrZero data type contains an identification number for a Wireless Local Access Network Gateway Integrated Service Adaptor (ISA) group. The value zero means that no WLAN Gateway ISA Group is defined. |
| TNamedItem | DisplayString (SIZE (1..32)) | current | The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII d… |
| TNamedItemOrEmpty | DisplayString (SIZE (0|1..32)) | current | The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, e… |
| TNetIngPlcrBurstSizeBytes | Integer32 (-1 | 128..4161536) | current | The amount of buffer space (in bytes) assigned to a queue by policer. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. |
| TNetIngPolicerId | Integer32 (1..16) | current | The data type describes the QoS control policer identifier on network ingress side. |
| TNetIngPolicerIdOrNone | Integer32 (0 | 1..16) | current | The data type describes the QoS control policer identifier on network ingress side or zero when not specified. |
| TNetworkPolicyID | TPolicyID (1..65535 | 65536 | 65537 | 65538 | 65539) | current | the identification number of a network policy. |
| TNonZeroWeight | Integer32 (1..100) | current | The weight of the specified entity while feeding into the parent. |
| TOperator | INTEGER { none (0), eq (1), range (2), lt (3), gt (4) } | current | The operator specifies the manner in which a couple of other MIB objects in the table are supposed to be used. Operator Value1 Value2 none(0) Any(0) Any(0) eq(1) Specified Value Any(0) range(2) Starting Value Ending Val… |
| TPerPacketOffset | Integer32 (-32..31) | current | The value, in bytes, of the adjustment to make to the size of each packet for accounting. |
| TPerPacketOffsetOvr | Integer32 (-128 | -32..31) | current | The value, in bytes, of the override of the adjustment to make to the size of each packet for accounting. A value of -128 indicates no override. |
| TPIRAggRateLimitOverride | Integer32 (-2 | -1 | 1..800000000) | current | The PIR rate to be used in kbps. The value -1 means maximum rate. A value of -2 specifies no override. |
| TPIRPercentOverride | Integer32 (-2 | 1..10000) | current | The PIR percentage rate specified in centipercent. A value of -2 specifies no override. |
| TPIRRate | Integer32 (-1 | 1..100000000) | current | The PIR rate to be used in kbps. The value -1 means maximum rate. |
| TPIRRateOrZero | Integer32 (-1 | 0..100000000) | current | The PIR rate to be used in kbps. The value -1 means maximum rate. The value 0 means undefined rate. |
| TPIRRateOverride | Integer32 (-2 | -1 | 1..100000000) | current | The PIR rate to be used in kbps. The value -1 means maximum rate. A value of -2 specifies no override. |
| TPIRRatePercent | Integer32 (1..100) | current | The percentage of maximum PIR rate allowed. A value of 0 is not acceptable, so the range begins at 1. |
| TPktByteOffset | Integer32 (-8 | -4 | 0 | 4 | 8) | current | The value, in bytes, of the adjustment to make to the size of each packet. |
| TPlcrBurstSizeBytes | Integer32 (-1 | 0..16777216) | current | The amount of buffer space (in bytes) assigned to a queue by policer. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. |
| TPlcrBurstSizeBytesOverride | Integer32 (-2 | -1 | 0..16777216) | current | The amount of buffer space (in bytes) assigned to a queue by policer. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. A value of -2 specifies no override. |
| TPlcyAcctPolicerId | Unsigned32 (1..63) | current | The data type describes the router policer accounting template policer identifier. |
| TPolicerRateType | INTEGER { kbps (1), percentLocalLimit (2) } | current | The type of the PIR/CIR percent rate. The value 'kbps' means the rate is specified in kbps. The value 'percentLocalLimit' means the rate is specified in percentage of local limit. |
| TPolicerRateTypeWithRefLimit | INTEGER { kbps (1), percentPortLimit (2), percentLocalLimit (3), percentReferPortLimit (4) } | current | The type of the PIR/CIR percent rate. The value 'kbps' means the rate is specified in kbps. The value 'percentPortLimit' means the rate is specified in percentage of port limit. The value 'percentLocalLimit' means the r… |
| TPolicerWeight | Integer32 (1..100) | current | The relative weight of the specified entity while feeding into the parent. |
| TPolicyID | Unsigned32 (0..65535 | 65536 | 65537 | 65538 | 65539 | 65540) | current | The identification number of a policy. |
| TPolicyStatementName | TNamedItem | current | The name of a policy statement, when used as index in a table. |
| TPolicyStatementNameOrEmpty | TNamedItemOrEmpty | current | The name of a policy statement, when an object refers to it. |
| TPolRateTypeRefOrLocalLimit | INTEGER { kbps (1), percentLocalLimit (2), percentReferPortLimit (3) } | current | The type of the PIR/CIR percent rate. The value 'kbps' means the rate is specified in kbps. The value 'percentLocalLimit' means the rate is specified in percentage of local limit. The value 'percentReferPortLimit' means… |
| TPortQosCIRRate | Unsigned32 (0..10000) | current | The Committed Information Rate (CIR) rate to be used in kbps. |
| TPortQosPIRRate | Unsigned32 (1..10000) | current | The Peak Information Rate (PIR) rate to be used in kbps. |
| TPortSchedLevel | Integer32 (1..8) | current | The priority level for the specified port scheduler entity. |
| TPortSchedulerAggRateLimitPIR | Integer32 (-1 | 1..800000000) | current | The Peak Information Rate (PIR) rate to be used in kbps. The value -1 means maximum rate. |
| TPortSchedulerCIR | Integer32 (-1 | 0..800000000) | current | The Committed Information Rate (CIR) rate to be used in kbps. The value -1 means maximum rate. |
| TPortSchedulerPIR | Integer32 (-1 | 1..100000000) | current | The Peak Information Rate (PIR) rate to be used in kbps. The value -1 means maximum rate. |
| TPortSchedulerPIRRate | Integer32 (-1 | 1..800000000) | current | The Peak Information Rate (PIR) rate to be used in kbps. The value -1 means maximum rate. |
| TPrecValue | Integer32 (0..7) | current | The precedence bits as used in the IPv4 header. This constitutes of 3 bits and hence can hold the values from 0 to 7. |
| TPrecValueOrNone | Integer32 (-1 | 0..7) | current | The precedence bits as used in the IPv4 header. This constitutes of 3 bits and hence can hold the values from 0 to 7. The value '-1' specifies that the precedence value is undefined/unused. |
| TPriority | INTEGER { low (1), high (2) } | current | the priority to apply to a packet |
| TPriorityOrDefault | INTEGER { low (1), high (2), default (3) } | current | the priority to apply to a packet. when set to default(3), the priority from the default action is used. |
| TPriorityOrUndefined | INTEGER { undefined (0), low (1), high (2) } | current | the priority to apply to a packet. when set to undefined(0), the priority is not applicable. |
| TProfile | INTEGER { in (1), out (2) } | current | the profile marking of a packet at the ingress. |
| TProfileOrNone | INTEGER { none (0), in (1), out (2) } | current | Profile marking of a packet. |
| TPSPRateType | INTEGER { kbps (1), percentLocal (2), percentLagActive (3) } | current | The type of the PIR/CIR rate being applied to port scheduler policy. The value of 'kbps' means the rate is specified in kbps. The value of 'percentActivePortLimit' means the rate is specified in percentage of active por… |
| TQGroupType | INTEGER { port (0), vpls (1) } | current | This textual convention specifies the type of the Queue-Group. |
| TQosIngressPolicyID | TPolicyID | current | The identification number of a QoS ingress policy. |
| TQosOverrideType | INTEGER { queue (1), policer (2), aggRateLimit (3), arbiter (4), scheduler (5), slaAggRateLimit (6), wrrGroup (7) } | current | This textual convention specifies the type of the Qos Override. |
| TQosOverrideTypeId | Integer32 (0..63) | current | This textual convention indicates the identifier of the queue or policer that is overridden, or zero if the item that is overridden is not a queue or a policer. |
| TQosQGrpInstanceIDorZero | Unsigned32 (0 | 1..65535) | current | The identification number of a QoS queue group instance. The value of '0' indicates the system determined default value. |
| TQosQueueCIRRate | Integer32 (-1 | 0..2000000000) | current | The CIR rate to be used in kbps. The value -1 means maximum rate. |
| TQosQueueCIRRateOverride | Integer32 (-2 | -1 | 0..2000000000) | current | The CIR rate to be used in kbps. The value -1 means maximum rate. A value of -2 specifies no override. |
| TQosQueuePIRRate | Integer32 (-1 | 1..2000000000) | current | The PIR rate to be used in kbps. The value -1 means maximum rate. |
| TQosQueuePIRRateOverride | Integer32 (-2 | -1 | 1..2000000000) | current | The PIR rate to be used in kbps. The value -1 means maximum rate. A value of -2 specifies no override. |
| TQueueId | Integer32 (0 | 1..32) | current | The value of TQueueId specifies the identification number of a queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TQueueId is an SNMP tab… |
| TQueueIdOrAll | Integer32 (-1 | 0 | 1..32) | current | The value of TQueueIdOrAll specifies the identification number of a queue A value of zero (0) indicates that no specific queue identification has been assigned for this object. A value of (-1) indicates 'all queues'. |
| TQueueMode | INTEGER { priority (1), profile (2) } | current | The mode in which the queue is operating. If the queue is operating in the 'priority' mode, it is capable of handling traffic differently with two distinct priorities. These priorities are assigned by the stages precedi… |
| TQueueStatModeFormat | INTEGER { priority (1), profile (2), v4V6 (3) } | current | The mode in which the queue stats are collected. In 'priority' mode separate stats are collected for high and low priority packets/octets. In 'profile' mode separate stats are collected for in profile and out of profile… |
| TRatePercent | Integer32 (0..100) | current | The percentage of maximum rate allowed. |
| TRateType | INTEGER { kbps (1), percent (2) } | current | The type of the PIR/CIR rate. The value 'kbps' means the rate is specified in kbps. The value 'percent' means the rate is specified in percentage |
| TRegularExpression | DisplayString | current | A regular expression string. |
| TRemarkType | INTEGER { none (1), dscp (2), precedence (3) } | current | The remarking to be used. |
| TResolveStatus | INTEGER { disabled (0), filter (1), any (2), match-family-ip (3) } | current | The TResolveStatus indicates resolution status of the tunnels. |
| TruthValueNoTypeTranslator | INTEGER { true (1), false (2) } | current | Represents a boolean value. |
| TSapEgrEncapGroupActionType | INTEGER { create (1), destroy (2) } | current | TSapEgrEncapGroupActionType identifies Encapsulation group action type on SAP egress. It is used to create or destroy row entries in an associated table. |
| TSapEgrEncapGroupType | INTEGER { isid (1) } | current | TSapEgrEncapGroupType identifies Encapsulation group type on SAP egress. |
| TSapEgrEncapGrpQosPolicyIdOrZero | Unsigned32 (0 | 1..65535) | current | TSapEgrEncapGrpQosPolicyIdOrZero identifies SAP egress Encapsulation group QoS policy. The value '0' indicates no QoS policy is set. |
| TSapEgressPolicyID | TPolicyID (1..65535 | 65536 | 65537 | 65538 | 65539) | current | The identification number of a SAP egress policy. |
| TSapIngressPolicyID | TPolicyID | current | The identification number of a SAP ingress policy. |
| TSdpEgressPolicyID | TPolicyID | current | The identification number of a SDP egress network policy. |
| TSdpIngressPolicyID | TPolicyID | current | The identification number of a SDP ingress network policy. |
| TSecondaryShaper10GPIRRate | Integer32 (-1 | 1..10000) | current | The secondary shaper PIR rate to be used in Mbps. The value -1 means maximum rate. |
| TSiteOperStatus | INTEGER { up (1), down (2), outOfResource (3) } | current | TSiteOperStatus data type is an enumerated integer that describes the values used to identify the current operational state of a site. |
| TSubHostId | Unsigned32 | current | A number used to uniquely identify a subscriber host in the system |
| TTcpUdpPort | Integer32 (0 | 1..65535) | current | The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc. |
| TTcpUdpPortOperator | TOperator | current | The operator used for checking on TCP/UDP ports values and ranges |
| TTmplPolicyID | Unsigned32 (0..65535) | current | The identification number of a policy for template objects. |
| TWeight | Integer32 (0..100) | current | The weight of the specified entity while feeding into the parent. |
| TWeightOverride | Integer32 (-2 | 0..100) | current | The weight of the specified entity while feeding into the parent. A value of -2 specifies no override. |
| TWredSlopeProfile | INTEGER { in (1), out (2), exceed (4), inplus (5) } | current | The profile marking of a packet. Value of 'in' specifies in-profile marking. Value of 'out' specifies out-profile marking. Value of 'none' specifies the profile marking of the packet will be inherited from the existing … |
| TXLNamedItem | DisplayString (SIZE (1..255)) | current | The extra long name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TXLNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl… |
| TXLNamedItemOrEmpty | DisplayString (SIZE (0|1..255)) | current | The extra long name of an item, or an empty string. When used in a reference (TXLNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters… |
| TXLPolicyNameOrExpOrEmpty | TXLNamedItemOrEmpty | current | The extra long name of a policy statement or an expression or an empty string. A logical expression contains terms and operators and can contain sub-expressions enclosed in round brackets. A term is a string of type TPo… |
| VRtrIgmpHostMcRDstStatType | INTEGER { joinTx (1), joinDenyTx (2), dropTx (3), joinLost (4), joinDenyLost (5), dropLost (6) } | current | The VRtrIgmpHostMcRDstStatType data type is an enumerated integer that indicates a type of IGMP host mcast reporting destination statistics. |