TN-CES-MIB
282 objects
The MIB module for the Circuit Emulation Service.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress TruthValue |
| TRANSITION-SMI | tnProducts |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.5.60 | IdentitytnCesMIB | The MIB module for the Circuit Emulation Service. | ||
| 1.3.6.1.4.1.868.2.5.60.0 | NodetnCesNotifications | |||
| 1.3.6.1.4.1.868.2.5.60.0.1 | ScalartnCesEventDetails | read-only | current | Text information describing the event that has occurred. |
| 1.3.6.1.4.1.868.2.5.60.0.2 | ScalartnCesEventPriority | read-only | current | Priority of this event. |
| 1.3.6.1.4.1.868.2.5.60.0.3 | NodetnCesEventId | |||
| 1.3.6.1.4.1.868.2.5.60.0.3.0 | NodetnCesEventIdGeneral | |||
| 1.3.6.1.4.1.868.2.5.60.0.3.0.1 | NotificationtnCesGeneralEvent | current | Notification of an event relating to CES. | |
| 1.3.6.1.4.1.868.2.5.60.1 | NodetnCesObjects | |||
| 1.3.6.1.4.1.868.2.5.60.1.1 | NodetnCesProtocol | |||
| 1.3.6.1.4.1.868.2.5.60.1.1.1 | ScalartnCesProtocolType | read-write | current | Which network protocol to use for TDM over IP packets. Note that MPLS is not currenly supported. |
| 1.3.6.1.4.1.868.2.5.60.1.1.2 | ScalartnCesProtocolUnderrunFixed | read-write | current | Determins the underrun value in a TDM timeslot when no data was available in the logical link jitter buffer. When true, use the fixed value specified by tnCesP… |
| 1.3.6.1.4.1.868.2.5.60.1.1.3 | ScalartnCesProtocolUnderrunValue | read-write | current | Determins the underrun value in a TDM timeslot when no data was available in the logical link jitter buffer. Used when tnCesProtocolUnderrunFixed is false. |
| 1.3.6.1.4.1.868.2.5.60.1.1.4 | ScalartnCesProtocolUDPBasePort | read-write | current | The UDP port number used for the first logical link. The 2nd logical link uses this value plus one, and so on. Only relevent when tnCesProtocolType is ipUdpRtp. |
| 1.3.6.1.4.1.868.2.5.60.1.1.5 | ScalartnCesProtocolEnableSSRCChecking | read-write | current | Whether to check the RTP SSRC value on received packets. Disabling the check can be useful in aiding compatibility with equipment from other vendors. Only used… |
| 1.3.6.1.4.1.868.2.5.60.1.2 | NodetnCesClockingAlternate | |||
| 1.3.6.1.4.1.868.2.5.60.1.2.1 | ScalartnCesClockingAlternateEnable | read-write | current | Whether to use the alternate clocking architecure which supports asymmeric and plesiosynchronous operation. |
| 1.3.6.1.4.1.868.2.5.60.1.3 | NodetnCesClockRecovery | |||
| 1.3.6.1.4.1.868.2.5.60.1.3.1 | ScalartnCesClockRecoveryAlgorithm | read-write | current | Which algorithm to use for TDM over IP clock recovery. |
| 1.3.6.1.4.1.868.2.5.60.1.3.2 | ScalartnCesClockRecoveryFilter | read-write | current | Which filter setting to use for TDM over IP clock recovery. |
| 1.3.6.1.4.1.868.2.5.60.1.3.3 | ScalartnCesClockRecoveryMaxDeviation | read-write | current | The maximum step change allowed in the recovered clock in PPM. |
| 1.3.6.1.4.1.868.2.5.60.1.4 | NodetnCesEvent | |||
| 1.3.6.1.4.1.868.2.5.60.1.4.1 | ScalartnCesEventThreshold | read-write | current | Priority threshold for reporting events related to CES. Events with a priority above this level are not reported to the system log or notified in SNMP traps. |
| 1.3.6.1.4.1.868.2.5.60.1.4.2 | ScalartnCesEventReportingInterval | read-write | current | How frequently to report certain CES events when thesholds are exceeded. The interval is specicifed in minutes. |
| 1.3.6.1.4.1.868.2.5.60.1.4.3 | ScalartnCesEventThresholdEarly | read-write | current | Threshold above which to report early packet errors. When this value is zero, reporting is disabled. |
| 1.3.6.1.4.1.868.2.5.60.1.4.4 | ScalartnCesEventThresholdLate | read-write | current | Threshold above which to report late packet errors. When this value is zero, reporting is disabled. |
| 1.3.6.1.4.1.868.2.5.60.1.4.5 | ScalartnCesEventThresholdUnderrun | read-write | current | Threshold above which to report underrun errors. When this value is zero, reporting is disabled. |
| 1.3.6.1.4.1.868.2.5.60.1.4.6 | ScalartnCesEventThresholdDCO | read-write | current | Threshold above which to report clock recovery DCO changes. When this value is zero, reporting is disabled. |
| 1.3.6.1.4.1.868.2.5.60.1.5 | NodetnCesProcessor | |||
| 1.3.6.1.4.1.868.2.5.60.1.5.1 | ScalartnCesProcessorVersion | read-only | current | CES packet processor hardware and software version information. |
| 1.3.6.1.4.1.868.2.5.60.1.5.2 | ScalartnCesProcessorProtocolMatch1 | read-only | current | The number of frames which hit protocol matching rule 1. |
| 1.3.6.1.4.1.868.2.5.60.1.5.3 | ScalartnCesProcessorProtocolMatch2 | read-only | current | The number of frames which hit protocol matching rule 2. |
| 1.3.6.1.4.1.868.2.5.60.1.5.4 | ScalartnCesProcessorProtocolMatch3 | read-only | current | The number of frames which hit protocol matching rule 3. |
| 1.3.6.1.4.1.868.2.5.60.1.5.5 | ScalartnCesProcessorProtocolMatch4 | read-only | current | The number of frames which hit protocol matching rule 4. |
| 1.3.6.1.4.1.868.2.5.60.1.5.6 | ScalartnCesProcessorProtocolNoMatch | read-only | current | The number of frames which hit no protocol matching rules. |
| 1.3.6.1.4.1.868.2.5.60.1.5.7 | ScalartnCesProcessorClassifyFail | read-only | current | The number of frames which fail to classify. |
| 1.3.6.1.4.1.868.2.5.60.1.5.8 | ScalartnCesProcessorVerifyFail | read-only | current | The number of frames which fail to verify. |
| 1.3.6.1.4.1.868.2.5.60.1.5.9 | ScalartnCesProcessorIpv4ChecksumFail | read-only | current | The number of frames with IPV4 checksum failures. |
| 1.3.6.1.4.1.868.2.5.60.1.5.10 | ScalartnCesProcessorUdpChecksumFail | read-only | current | The number of frames with UDP checksum failures. |
| 1.3.6.1.4.1.868.2.5.60.1.6 | NodetnCesClockStatus | |||
| 1.3.6.1.4.1.868.2.5.60.1.6.1 | ScalartnCesClockStatusLock | read-only | current | The CES processor DPLL lock status. |
| 1.3.6.1.4.1.868.2.5.60.1.6.2 | ScalartnCesClockStatusSlaveMode | read-only | current | Whether the CES processor clock is in slave (true) or master (false) mode. |
| 1.3.6.1.4.1.868.2.5.60.1.6.3 | ScalartnCesClockStatusSource | read-only | current | Name of the current clock source. |
| 1.3.6.1.4.1.868.2.5.60.1.7 | NodetnCesTemperature | |||
| 1.3.6.1.4.1.868.2.5.60.1.7.1 | ScalartnCesTemperatureBoardWhole | read-only | current | Temperature measurement of circuit board. Whole part before the decimal point. |
| 1.3.6.1.4.1.868.2.5.60.1.7.2 | ScalartnCesTemperatureBoardFrac | read-only | current | Temperature measurement of circuit board. Fractional part after the decimal point. |
| 1.3.6.1.4.1.868.2.5.60.1.7.3 | ScalartnCesTemperatureProcessorWhole | read-only | current | Temperature measurement of processor. Whole part before the decimal point. |
| 1.3.6.1.4.1.868.2.5.60.1.7.4 | ScalartnCesTemperatureProcessorFrac | read-only | current | Temperature measurement of processor. Fractional part after the decimal point. |
| 1.3.6.1.4.1.868.2.5.60.1.8 | NodetnCesIP | |||
| 1.3.6.1.4.1.868.2.5.60.1.8.1 | ScalartnCesIpv4AddrType | read-only | current | The IP address type associated with tnCesIpv4Addr. Has the value ipv4. |
| 1.3.6.1.4.1.868.2.5.60.1.8.2 | ScalartnCesIpv4Addr | read-write | current | The IPv4 address to use for TDM over IP packets. Applies when the remote end of a circuit has an IPv4 address. |
| 1.3.6.1.4.1.868.2.5.60.1.8.3 | ScalartnCesIpv4PrefixLength | read-write | current | The prefix length associated with the CES IPv4 address. |
| 1.3.6.1.4.1.868.2.5.60.1.8.4 | ScalartnCesIpv6AddrType | read-only | current | The IP address type associated with tnCesIpv6Addr. Has the value ipv6. |
| 1.3.6.1.4.1.868.2.5.60.1.8.5 | ScalartnCesIpv6Addr | read-write | current | The IPv6 address to use for TDM over IP packets. Applies when the remote end of a circuit has an IPv6 address. |
| 1.3.6.1.4.1.868.2.5.60.1.8.6 | ScalartnCesIpv6PrefixLength | read-write | current | The prefix length associated with the CES IPv6 address. |
| 1.3.6.1.4.1.868.2.5.60.1.9 | NodetnCesClockPriority | |||
| 1.3.6.1.4.1.868.2.5.60.1.9.1 | TabletnCesMiscClockPriorityTable | not-accessible | current | Table of clock priorities for miscellaneous sources. |
| 1.3.6.1.4.1.868.2.5.60.1.9.1.1 | RowtnCesMiscClockPriorityEntry | not-accessible | current | Each entry has the clock priority for a particular clock source. |
| 1.3.6.1.4.1.868.2.5.60.1.9.1.1.1 | ColumntnCesMiscClockPriorityItem | not-accessible | current | Which clock source this clock priority is for. |
| 1.3.6.1.4.1.868.2.5.60.1.9.1.1.2 | ColumntnCesMiscClockPriority | read-write | current | The clock priority of a clock source. A lower numeric value indicates a higher priority. |
| 1.3.6.1.4.1.868.2.5.60.1.9.2 | TabletnCesPRIClockPriorityTable | not-accessible | current | Table of clock priorities for TDM ports. |
| 1.3.6.1.4.1.868.2.5.60.1.9.2.1 | RowtnCesPRIClockPriorityEntry | not-accessible | current | Each entry has the clock priority for a TDM port. |
| 1.3.6.1.4.1.868.2.5.60.1.9.2.1.1 | ColumntnCesPRIClockPriorityIndex | not-accessible | current | Which TDM port this clock priority is for. |
| 1.3.6.1.4.1.868.2.5.60.1.9.2.1.2 | ColumntnCesPRIClockPriority | read-write | current | The clock priority of a TDM port. A lower numeric value indicates a higher priority. |
| 1.3.6.1.4.1.868.2.5.60.1.9.3 | TabletnCesLLClockPriorityTable | not-accessible | current | Table of clock priorities for logical link clock streams. |
| 1.3.6.1.4.1.868.2.5.60.1.9.3.1 | RowtnCesLLClockPriorityEntry | not-accessible | current | Each entry has the clock priority for a logical link clock stream. |
| 1.3.6.1.4.1.868.2.5.60.1.9.3.1.1 | ColumntnCesLLClockPriorityIndex | not-accessible | current | Which logical link clocking stream this clock priority is for. |
| 1.3.6.1.4.1.868.2.5.60.1.9.3.1.2 | ColumntnCesLLClockPriority | read-write | current | The clock priority of a logical link clock stream. A lower numeric value indicates a higher priority. |
| 1.3.6.1.4.1.868.2.5.60.1.10 | TabletnCesMulticastJoinTable | not-accessible | current | Table of multicast groups to join. |
| 1.3.6.1.4.1.868.2.5.60.1.10.1 | RowtnCesMulticastJoinEntry | not-accessible | current | Each entry has the configuration for a multicast group to join. |
| 1.3.6.1.4.1.868.2.5.60.1.10.1.1 | ColumntnCesMulticastJoinIndex | not-accessible | current | Index of multicast group. |
| 1.3.6.1.4.1.868.2.5.60.1.10.1.2 | ColumntnCesMulticastJoinAction | read-write | current | Whether to join a multicast group. When true, join the group specified by tnCesMulticastJoinAddr. When false, do not join any group and leave any previously jo… |
| 1.3.6.1.4.1.868.2.5.60.1.10.1.3 | ColumntnCesMulticastJoinAddrType | read-write | current | The IP address type of the multicast group to join. Must be ipv4 or ipv6. |
| 1.3.6.1.4.1.868.2.5.60.1.10.1.4 | ColumntnCesMulticastJoinAddr | read-write | current | The IP address of the multicast group to join. This must be a multicast address. |
| 1.3.6.1.4.1.868.2.5.60.1.11 | TabletnCesTDMTable | not-accessible | current | Table of TDM ports. |
| 1.3.6.1.4.1.868.2.5.60.1.11.1 | RowtnCesTDMEntry | not-accessible | current | Each entry has the configuration for a TDM port. |
| 1.3.6.1.4.1.868.2.5.60.1.11.1.1 | ColumntnCesTDMPortNumber | not-accessible | current | The TDM port number. |
| 1.3.6.1.4.1.868.2.5.60.1.11.1.2 | ColumntnCesTDMPresentation | read-write | current | Network or user presentation. This options is not supported on all products. Modifications will be ignore on such products. |
| 1.3.6.1.4.1.868.2.5.60.1.11.1.3 | ColumntnCesTDMFraming | read-write | current | Whether the TDM port operates in framed fractional or unframed full mode. It is not possible to set a port mode which would exclude any TDM channels that are a… |
| 1.3.6.1.4.1.868.2.5.60.1.11.1.4 | ColumntnCesTDMMode | read-write | current | TDM port mode T1 or E1. It is not possible to set a port mode which would exclude any TDM channels that are assigned to a logical link (see tnCesLLChanSelectUs… |
| 1.3.6.1.4.1.868.2.5.60.1.11.1.5 | ColumntnCesTDMTS0Passthrough | read-write | current | Whether timeslot zero is passed in E1 fractional mode. Only valid when tnCesTDMFraming is fractional and tnCesTDMMode is E1. |
| 1.3.6.1.4.1.868.2.5.60.1.11.1.6 | ColumntnCesTDMCRC4 | read-write | current | Whether the TDM framing uses CRC4. Only valid when tnCesTDMFraming is fractional. |
| 1.3.6.1.4.1.868.2.5.60.1.11.1.7 | ColumntnCesTDMShutdownCallsOnFail | read-write | current | Whether to shutdown the CES connections or ISDN calls using this port when the port fails. |
| 1.3.6.1.4.1.868.2.5.60.1.11.1.8 | ColumntnCesTDMImpedance | read-write | current | Electrical impedance of the TDM port, 75ohms or 120ohms. |
| 1.3.6.1.4.1.868.2.5.60.1.11.1.9 | ColumntnCesTDMT1Framing | read-write | current | The frame structure in T1 mode. Only used when tnCesTDMMode is T1. |
| 1.3.6.1.4.1.868.2.5.60.1.11.1.10 | ColumntnCesTDMT1LineCode | read-write | current | The line code in T1 mode. Only used when tnCesTDMMode is T1. |
| 1.3.6.1.4.1.868.2.5.60.1.11.1.11 | ColumntnCesTDMT1LoopCodeType | read-write | current | The type of loop code which when detected on the port will cause loops to be switched on or off. |
| 1.3.6.1.4.1.868.2.5.60.1.11.1.12 | ColumntnCesTDMT1LoopCodeRxEnable | read-write | current | Whether detection of loop codes is enabled or disabled on the port. |
| 1.3.6.1.4.1.868.2.5.60.1.11.1.13 | ColumntnCesTDMT1LoopCodeUserUp | read-write | current | User defined bit pattern to cause loop up for the FACU option. |
| 1.3.6.1.4.1.868.2.5.60.1.11.1.14 | ColumntnCesTDMT1LoopCodeUserDown | read-write | current | User defined bit pattern to cause loop down for the FACU option. |
| 1.3.6.1.4.1.868.2.5.60.1.11.1.15 | ColumntnCesTDMT1LoopCodeUserLength | read-write | current | The number of bits in tnCesTDMT1LoopCodeUserUp and tnCesTDMT1LoopCodeUserDown. |
| 1.3.6.1.4.1.868.2.5.60.1.11.1.16 | ColumntnCesTDMDTE | read-write | current | Whether the port is configured as DTE (true) or DCE (false). Only applies to Contra ports. |
| 1.3.6.1.4.1.868.2.5.60.1.12 | TabletnCesLLTable | not-accessible | current | Table of logical link configuration. |
| 1.3.6.1.4.1.868.2.5.60.1.12.1 | RowtnCesLLEntry | not-accessible | current | Each entry has the current configuration of a logical link. |
| 1.3.6.1.4.1.868.2.5.60.1.12.1.1 | ColumntnCesLLNumber | not-accessible | current | The logical link number. |
| 1.3.6.1.4.1.868.2.5.60.1.12.1.2 | ColumntnCesLLname | read-write | current | An optional name for the logical link. |
| 1.3.6.1.4.1.868.2.5.60.1.12.1.3 | ColumntnCesLLDirection | read-write | current | Direction of data flow over the packet network for a logical link. |
| 1.3.6.1.4.1.868.2.5.60.1.12.1.4 | ColumntnCesLLRemoteIpAddrType | read-write | current | The IP address type of the remote end of the logical link. Must be ipv4 or ipv6. |
| 1.3.6.1.4.1.868.2.5.60.1.12.1.5 | ColumntnCesLLRemoteIpAddr | read-write | current | The IP address of the remote end of the logical link. If tnCesLLDirection is tx or both then this may be a unicast or multicast address. If tnCesLLDirection is… |
| 1.3.6.1.4.1.868.2.5.60.1.12.1.6 | ColumntnCesLLSecondaryRemoteIpAddrType | read-write | current | The secondary IP address type of the remote end of the logical link. Must be ipv4 or ipv6. |
| 1.3.6.1.4.1.868.2.5.60.1.12.1.7 | ColumntnCesLLSecondaryRemoteIpAddr | read-write | current | The secondary IP address of the remote end of the logical link. If tnCesLLDirection is tx or both then this may be a unicast or multicast address. If tnCesLLDi… |
| 1.3.6.1.4.1.868.2.5.60.1.12.1.8 | ColumntnCesLLQosType | read-write | current | Whether logical link QOS is encoded as Type of Service (TOS) or Diffserv. |
| 1.3.6.1.4.1.868.2.5.60.1.12.1.9 | ColumntnCesLLQosTOS | read-write | current | Type Of Service value for logical link QOS. Only used when tnCesLLQosType is tos. |
| 1.3.6.1.4.1.868.2.5.60.1.12.1.10 | ColumntnCesLLQosDiffserv | read-write | current | Diffserv codepoint value for logical link QOS. Only used when tnCesLLQosType is diffserv. |
| 1.3.6.1.4.1.868.2.5.60.1.12.1.11 | ColumntnCesLLVlanTag | read-write | current | Whether Ethernet frames for this logical link are VLAN tagged. |
| 1.3.6.1.4.1.868.2.5.60.1.12.1.12 | ColumntnCesLLVlanId | read-write | current | VLAN ID for Ethernet frames for this logical link. Only applies when tnCesLLVlanTag is true. |
| 1.3.6.1.4.1.868.2.5.60.1.12.1.13 | ColumntnCesLLVlanPriority | read-write | current | Priority value for Ethernet frames for this logical link. Only applies when tnCesLLVlanTag is true. |
| 1.3.6.1.4.1.868.2.5.60.1.12.1.14 | ColumntnCesLLJitterBufferLength | read-write | current | Jitter buffer length in ms for this logical link. |
| 1.3.6.1.4.1.868.2.5.60.1.12.1.15 | ColumntnCesLLFramesPerPacket | read-write | current | In framed mode, the number of TDM frames in the packet payload for this logical link. |
| 1.3.6.1.4.1.868.2.5.60.1.12.1.16 | ColumntnCesLLRemoteLinkNumber | read-write | current | The remote logical link number that this link exchanges packets with. |
| 1.3.6.1.4.1.868.2.5.60.1.13 | TabletnCesLLSchedTable | not-accessible | current | Table of logical link schedule configuration. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1 | RowtnCesLLSchedEntry | not-accessible | current | Each entry has the current configuration of a logical link schedule. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.1 | ColumntnCesLLSchedNumber | not-accessible | current | The logical link number. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.2 | ColumntnCesLLSchedEnable | read-write | current | Whether to enable the logical link schedule. When false, there is no scheduling and this link is always on. When true, the link is enabled according to its sch… |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.3 | ColumntnCesLLSchedStartTimeMonHours | read-write | current | Hours component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.4 | ColumntnCesLLSchedStartTimeMonMins | read-write | current | Minutes component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.5 | ColumntnCesLLSchedStopTimeMonHours | read-write | current | Hours component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.6 | ColumntnCesLLSchedStopTimeMonMins | read-write | current | Minutes component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.7 | ColumntnCesLLSchedStartTimeTueHours | read-write | current | Hours component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.8 | ColumntnCesLLSchedStartTimeTueMins | read-write | current | Minutes component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.9 | ColumntnCesLLSchedStopTimeTueHours | read-write | current | Hours component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.10 | ColumntnCesLLSchedStopTimeTueMins | read-write | current | Minutes component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.11 | ColumntnCesLLSchedStartTimeWedHours | read-write | current | Hours component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.12 | ColumntnCesLLSchedStartTimeWedMins | read-write | current | Minutes component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.13 | ColumntnCesLLSchedStopTimeWedHours | read-write | current | Hours component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.14 | ColumntnCesLLSchedStopTimeWedMins | read-write | current | Minutes component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.15 | ColumntnCesLLSchedStartTimeThuHours | read-write | current | Hours component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.16 | ColumntnCesLLSchedStartTimeThuMins | read-write | current | Minutes component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.17 | ColumntnCesLLSchedStopTimeThuHours | read-write | current | Hours component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.18 | ColumntnCesLLSchedStopTimeThuMins | read-write | current | Minutes component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.19 | ColumntnCesLLSchedStartTimeFriHours | read-write | current | Hours component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.20 | ColumntnCesLLSchedStartTimeFriMins | read-write | current | Minutes component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.21 | ColumntnCesLLSchedStopTimeFriHours | read-write | current | Hours component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.22 | ColumntnCesLLSchedStopTimeFriMins | read-write | current | Minutes component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.23 | ColumntnCesLLSchedStartTimeSatHours | read-write | current | Hours component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.24 | ColumntnCesLLSchedStartTimeSatMins | read-write | current | Minutes component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.25 | ColumntnCesLLSchedStopTimeSatHours | read-write | current | Hours component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.26 | ColumntnCesLLSchedStopTimeSatMins | read-write | current | Minutes component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.27 | ColumntnCesLLSchedStartTimeSunHours | read-write | current | Hours component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.28 | ColumntnCesLLSchedStartTimeSunMins | read-write | current | Minutes component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.29 | ColumntnCesLLSchedStopTimeSunHours | read-write | current | Hours component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.13.1.30 | ColumntnCesLLSchedStopTimeSunMins | read-write | current | Minutes component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.14 | TabletnCesLLJATable | not-accessible | current | Table of logical link dynamic jitter buffer adjustment configuration. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1 | RowtnCesLLJAEntry | not-accessible | current | Each entry has the current dynamic jitter adjustment configuration of a logical link. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.1 | ColumntnCesLLJANumber | not-accessible | current | The logical link number. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.2 | ColumntnCesLLJitterAdjustmentMode | read-write | current | The mode in which automatic jitter buffer adustment is to be run. None - No automatic adjuistment of the jitter buffer will be carried out for this logical lin… |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.3 | ColumntnCesLLJitterAdjustmentAfter | read-write | current | How long to wait in minutes before doing any jitter buffer adjustment once the logical link has become active. Only used when tnCesLLJitterAdjustmentMode is al… |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.4 | ColumntnCesLLJASchedStartTimeMonHours | read-write | current | Hours component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.5 | ColumntnCesLLJASchedStartTimeMonMins | read-write | current | Minutes component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.6 | ColumntnCesLLJASchedStopTimeMonHours | read-write | current | Hours component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.7 | ColumntnCesLLJASchedStopTimeMonMins | read-write | current | Minutes component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.8 | ColumntnCesLLJASchedStartTimeTueHours | read-write | current | Hours component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.9 | ColumntnCesLLJASchedStartTimeTueMins | read-write | current | Minutes component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.10 | ColumntnCesLLJASchedStopTimeTueHours | read-write | current | Hours component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.11 | ColumntnCesLLJASchedStopTimeTueMins | read-write | current | Minutes component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.12 | ColumntnCesLLJASchedStartTimeWedHours | read-write | current | Hours component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.13 | ColumntnCesLLJASchedStartTimeWedMins | read-write | current | Minutes component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.14 | ColumntnCesLLJASchedStopTimeWedHours | read-write | current | Hours component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.15 | ColumntnCesLLJASchedStopTimeWedMins | read-write | current | Minutes component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.16 | ColumntnCesLLJASchedStartTimeThuHours | read-write | current | Hours component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.17 | ColumntnCesLLJASchedStartTimeThuMins | read-write | current | Minutes component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.18 | ColumntnCesLLJASchedStopTimeThuHours | read-write | current | Hours component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.19 | ColumntnCesLLJASchedStopTimeThuMins | read-write | current | Minutes component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.20 | ColumntnCesLLJASchedStartTimeFriHours | read-write | current | Hours component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.21 | ColumntnCesLLJASchedStartTimeFriMins | read-write | current | Minutes component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.22 | ColumntnCesLLJASchedStopTimeFriHours | read-write | current | Hours component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.23 | ColumntnCesLLJASchedStopTimeFriMins | read-write | current | Minutes component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.24 | ColumntnCesLLJASchedStartTimeSatHours | read-write | current | Hours component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.25 | ColumntnCesLLJASchedStartTimeSatMins | read-write | current | Minutes component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.26 | ColumntnCesLLJASchedStopTimeSatHours | read-write | current | Hours component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.27 | ColumntnCesLLJASchedStopTimeSatMins | read-write | current | Minutes component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.28 | ColumntnCesLLJASchedStartTimeSunHours | read-write | current | Hours component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.29 | ColumntnCesLLJASchedStartTimeSunMins | read-write | current | Minutes component of schedule start time. The start time must not be later than the stop time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.30 | ColumntnCesLLJASchedStopTimeSunHours | read-write | current | Hours component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.14.1.31 | ColumntnCesLLJASchedStopTimeSunMins | read-write | current | Minutes component of schedule stop time. The stop time must not be earlier than the start time. |
| 1.3.6.1.4.1.868.2.5.60.1.15 | TabletnCesLLChanSelectTable | not-accessible | current | Table of TDM channels selected for a logical link. |
| 1.3.6.1.4.1.868.2.5.60.1.15.1 | RowtnCesLLChanSelectEntry | not-accessible | current | Each entry has the channel selection configuration of a logical link. |
| 1.3.6.1.4.1.868.2.5.60.1.15.1.1 | ColumntnCesLLChanSelectLLNumber | not-accessible | current | The logical link number. |
| 1.3.6.1.4.1.868.2.5.60.1.15.1.2 | ColumntnCesLLChanSelectPortNumber | not-accessible | current | The TDM or RS530 port number. |
| 1.3.6.1.4.1.868.2.5.60.1.15.1.3 | ColumntnCesLLChanSelectAvailable | read-only | current | Bitmap of whether each channel on this TDM port is available for use by this logical link. Channels are unavailable if they unavailable in the TDM port configu… |
| 1.3.6.1.4.1.868.2.5.60.1.15.1.4 | ColumntnCesLLChanSelectUsed | read-write | current | Bitmap of whether each channel on this TDM port is assigned for use by this logical link. A channel cannot be assigned to a logical link if the channel is unav… |
| 1.3.6.1.4.1.868.2.5.60.1.16 | TabletnCesLLAlternateTable | not-accessible | current | Table of logical link configuration items for the alternate clocking mode. |
| 1.3.6.1.4.1.868.2.5.60.1.16.1 | RowtnCesLLAlternateEntry | not-accessible | current | Each entry has the logical link configuration for the alternate clocking mode. |
| 1.3.6.1.4.1.868.2.5.60.1.16.1.1 | ColumntnCesLLAlternateLLNumber | not-accessible | current | The clocking stream / logical link number. |
| 1.3.6.1.4.1.868.2.5.60.1.16.1.2 | ColumntnCesLLPlesiosynchronous | read-write | current | Whether clocking for stream is plesiosynchronous. Only used when tnCesClockingAlternateEnable is true. |
| 1.3.6.1.4.1.868.2.5.60.1.16.1.3 | ColumntnCesLLAsymmetric | read-write | current | Asymmetric clocking mode. Only applies when the associated TDM port is full and when tnCesClockingAlternateEnable is true. |
| 1.3.6.1.4.1.868.2.5.60.1.16.1.4 | ColumntnCesLLBytesPerPacketRx | read-write | current | In unframed mode, the number of bytes in the packet payload for the logical link in the receive direction. |
| 1.3.6.1.4.1.868.2.5.60.1.16.1.5 | ColumntnCesLLBytesPerPacketTx | read-write | current | In unframed mode, the number of bytes in the packet payload for the logical link in the transmit direction. |
| 1.3.6.1.4.1.868.2.5.60.1.17 | TabletnCesLLStatusTable | not-accessible | current | Table of logical link status. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1 | RowtnCesLLStatusEntry | not-accessible | current | Each entry has the current status of a logical link. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.1 | ColumntnCesLLStatusNumber | not-accessible | current | The logical link number. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.2 | ColumntnCesLLStatusEnabled | read-only | current | Whether the logical link is enabled for use. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.3 | ColumntnCesLLStatusActive | read-only | current | Whether the logical link is active. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.4 | ColumntnCesLLStatusArpResolved | read-only | current | Whether address resolution has been completed for the logical link. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.5 | ColumntnCesLLStatusNumberOfChannels | read-only | current | The number of TDM channels being transported by this logical link. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.6 | ColumntnCesLLStatusRemoteMac | read-only | current | The MAC address of the remote end of the logical link, or the gateway MAC address when the remote end is on a different IP subnet. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.7 | ColumntnCesLLStatusRemoteIpAddrType | read-only | current | The IP address type of the remote end of the logical link. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.8 | ColumntnCesLLStatusRemoteIpAddr | read-only | current | The IP address of the remote end of the logical link. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.9 | ColumntnCesLLStatusRemoteContextKnown | read-only | current | Whether the logical link number on the remote end is known. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.10 | ColumntnCesLLStatusRemoteContextNumber | read-only | current | The logical link number on the remote end (if known). |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.11 | ColumntnCesLLStatusRemotePortKnown | read-only | current | Whether the UDP port number of the remote end of the logical link is known. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.12 | ColumntnCesLLStatusRemotePort | read-only | current | The UDP port number of the remote end of the logical link (if known). |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.13 | ColumntnCesLLStatusQueueLengthValid | read-only | current | Whether the jitter buffer statistics are available for the logical link. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.14 | ColumntnCesLLStatusMinQueueLength | read-only | current | The minimum fill level of the logical link jitter buffer. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.15 | ColumntnCesLLStatusMaxQueueLength | read-only | current | The maximum fill level of the logical link jitter buffer. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.16 | ColumntnCesLLStatusAveQueueLengthWhole | read-only | current | The average fill level of the logical link jitter buffer. Whole part before the decimal point. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.17 | ColumntnCesLLStatusAveQueueLengthFrac | read-only | current | The average fill level of the logical link jitter buffer. Fractional part after the decimal point. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.18 | ColumntnCesLLStatusEarly | read-only | current | The number of packets which arrived too early to be put into the logical link jitter buffer. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.19 | ColumntnCesLLStatusLate | read-only | current | The number of packets which arrived too late to be put into the logical link jitter buffer. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.20 | ColumntnCesLLStatusUnderrun | read-only | current | The number of underruns on the TDM interface caused by missing packets in the logical link jitter buffer. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.21 | ColumntnCesLLStatusLastSequence | read-only | current | The sequence number of the last packet received for the logical link. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.22 | ColumntnCesLLStatusPacketsRx | read-only | current | The number of packets received on the logical link. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.23 | ColumntnCesLLStatusPacketsTx | read-only | current | The number of packets transmitted on the logical link. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.24 | ColumntnCesLLStatusSlipsReduceCount | read-only | current | The number of times the jitter buffer has been slipped to reduced latency. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.25 | ColumntnCesLLStatusSlipsExtendCount | read-only | current | The number of times the jitter buffer has been slipped to extend latency. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.26 | ColumntnCesLLLocalLoop | read-write | current | Whether the logical link local loop is enabled. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.27 | ColumntnCesLLRemoteLoop | read-write | current | Whether the logical link remote loop is enabled. |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.28 | ColumntnCesLLNudge | read-write | current | The number of packets by which to nudge the jitter buffer for this logical link. A positive number extends the latency, a negative number reduces the latency, … |
| 1.3.6.1.4.1.868.2.5.60.1.17.1.29 | ColumntnCesLLResetErrorStats | read-write | current | Set to true to reset the jitter buffer error counts for this logical link. |
| 1.3.6.1.4.1.868.2.5.60.1.18 | TabletnCesTDMStatusTable | not-accessible | current | Table of TDM port status. |
| 1.3.6.1.4.1.868.2.5.60.1.18.1 | RowtnCesTDMStatusEntry | not-accessible | current | Each entry has the current status of a TDM port. |
| 1.3.6.1.4.1.868.2.5.60.1.18.1.1 | ColumntnCesTDMStatusNumber | not-accessible | current | The TDM port number. |
| 1.3.6.1.4.1.868.2.5.60.1.18.1.2 | ColumntnCesTDMStatusPhysical | read-only | current | Physical layer state of the TDM port. |
| 1.3.6.1.4.1.868.2.5.60.1.18.1.3 | ColumntnCesTDMStatusRxSignalLevel | read-only | current | Receive signal level on the TDM port. |
| 1.3.6.1.4.1.868.2.5.60.1.18.1.4 | ColumntnCesTDMStatusRxError | read-only | current | Receive error status of the TDM port. |
| 1.3.6.1.4.1.868.2.5.60.1.18.1.5 | ColumntnCesTDMLocalLoop | read-write | current | Whether the TDM port local loop is enabled. |
| 1.3.6.1.4.1.868.2.5.60.1.18.1.6 | ColumntnCesTDMRemoteLoop | read-write | current | Whether the TDM port remote loop is enabled. |
| 1.3.6.1.4.1.868.2.5.60.1.18.1.7 | ColumntnCesTDMBreakCalls | read-write | current | Set to true to break the CES connections or ISDN calls active on this port. |
| 1.3.6.1.4.1.868.2.5.60.1.19 | TabletnCesCallStatusTable | not-accessible | current | Table of calls. |
| 1.3.6.1.4.1.868.2.5.60.1.19.1 | RowtnCesCallStatusEntry | not-accessible | current | Each entry has the current status of a CES call. |
| 1.3.6.1.4.1.868.2.5.60.1.19.1.1 | ColumntnCesCallStatusNumber | not-accessible | current | The CES call number. |
| 1.3.6.1.4.1.868.2.5.60.1.19.1.2 | ColumntnCesCallStatusStartTime | read-only | current | Time the call was started. |
| 1.3.6.1.4.1.868.2.5.60.1.19.1.3 | ColumntnCesCallStatusSource | read-only | current | Source interface of the call. |
| 1.3.6.1.4.1.868.2.5.60.1.19.1.4 | ColumntnCesCallStatusDestination | read-only | current | Destination interface of the call. |
| 1.3.6.1.4.1.868.2.5.60.1.19.1.5 | ColumntnCesCallStatusOriginator | read-only | current | Whether this system originated the call. |
| 1.3.6.1.4.1.868.2.5.60.1.19.1.6 | ColumntnCesCallStatusDestinationNumber | read-only | current | Destination number of the call. |
| 1.3.6.1.4.1.868.2.5.60.1.19.1.7 | ColumntnCesCallStatusSourceNumber | read-only | current | Source number of the call. |
| 1.3.6.1.4.1.868.2.5.60.1.19.1.8 | ColumntnCesCallStatusState | read-only | current | State of the call. |
| 1.3.6.1.4.1.868.2.5.60.1.20 | TabletnCesClockStatusTable | not-accessible | current | Table of clock recovery status. |
| 1.3.6.1.4.1.868.2.5.60.1.20.1 | RowtnCesClockStatusEntry | not-accessible | current | Each entry has the current status of a CES clock stream. |
| 1.3.6.1.4.1.868.2.5.60.1.20.1.1 | ColumntnCesClockStatusStreamNumber | not-accessible | current | The CES clock stream number. |
| 1.3.6.1.4.1.868.2.5.60.1.20.1.2 | ColumntnCesClockStatusStreamStatus | read-only | current | Status of the clock recovery on the clock stream. |
| 1.3.6.1.4.1.868.2.5.60.1.20.1.3 | ColumntnCesClockStatusStreamMode | read-only | current | The clock recovery algorithm running on the clock stream, or disabled if no clock recovery is running. |
| 1.3.6.1.4.1.868.2.5.60.1.20.1.4 | ColumntnCesClockStatusStreamDCO | read-only | current | Recovered clock frequency offset in PPB. NB Limited to 32 bit range. |
| 1.3.6.1.4.1.868.2.5.60.1.20.1.5 | ColumntnCesClockStatusStreamDCOMin | read-only | current | Minimum value of the recovered clock frequency offset in PPB. NB Limited to 32 bit range. |
| 1.3.6.1.4.1.868.2.5.60.1.20.1.6 | ColumntnCesClockStatusStreamDCOMax | read-only | current | Maximum value of the recovered clock frequency offset in PPB. NB Limited to 32 bit range. |
| 1.3.6.1.4.1.868.2.5.60.1.20.1.7 | ColumntnCesClockStatusStreamDCOAvg | read-only | current | Average value of the recovered clock frequency offset in PPB. NB Limited to 32 bit range. |
| 1.3.6.1.4.1.868.2.5.60.1.21 | NodetnCesDebug | |||
| 1.3.6.1.4.1.868.2.5.60.1.21.1 | TabletnCesDebugTDMTable | not-accessible | current | Table of TDM port debug settings. |
| 1.3.6.1.4.1.868.2.5.60.1.21.1.1 | RowtnCesDebugTDMEntry | not-accessible | current | Each entry has the debug setting for a TDM port. |
| 1.3.6.1.4.1.868.2.5.60.1.21.1.1.1 | ColumntnCesDebugTDMPortNumber | not-accessible | current | The TDM port number. |
| 1.3.6.1.4.1.868.2.5.60.1.21.1.1.2 | ColumntnCesDebugTDMPortEnable | read-write | current | Whether to enable (true) or disable (false) debug on this TDM port. |
| 1.3.6.1.4.1.868.2.5.60.1.21.2 | TabletnCesDebugLLTable | not-accessible | current | Table of logical link debug settings. |
| 1.3.6.1.4.1.868.2.5.60.1.21.2.1 | RowtnCesDebugLLEntry | not-accessible | current | Each entry has the current debug setting for a logical link. |
| 1.3.6.1.4.1.868.2.5.60.1.21.2.1.1 | ColumntnCesDebugLLNumber | not-accessible | current | The logical link number. |
| 1.3.6.1.4.1.868.2.5.60.1.21.2.1.2 | ColumntnCesDebugLLEnable | read-write | current | Whether to enable (true) or disable (false) debug on this logical link. |
| 1.3.6.1.4.1.868.2.5.60.1.21.3 | TabletnCesDebugMiscTable | not-accessible | current | Table of miscellaneous debug settings. |
| 1.3.6.1.4.1.868.2.5.60.1.21.3.1 | RowtnCesDebugMiscEntry | not-accessible | current | Each entry has the current debug setting for a miscellaneous item. |
| 1.3.6.1.4.1.868.2.5.60.1.21.3.1.1 | ColumntnCesDebugMiscItem | not-accessible | current | The debug item to enable or disable. |
| 1.3.6.1.4.1.868.2.5.60.1.21.3.1.2 | ColumntnCesDebugMiscEnable | read-write | current | Whether to enable (true) or disable (false) debug for this item. |
| 1.3.6.1.4.1.868.2.5.60.1.22 | TabletnCesRS530Table | not-accessible | current | Table of RS530 serial ports. |
| 1.3.6.1.4.1.868.2.5.60.1.22.1 | RowtnCesRS530Entry | not-accessible | current | Each entry has the configuration for a RS530 serial port. |
| 1.3.6.1.4.1.868.2.5.60.1.22.1.1 | ColumntnCesRS530PortNumber | not-accessible | current | The RS530 serial port number. |
| 1.3.6.1.4.1.868.2.5.60.1.22.1.2 | ColumntnCesRS530Rate | read-write | current | The RS530 serial port bit rate in bits per second. Valid rates are 64K to 2048K in 64K steps, or one of the following subrates: 38400, 19200, 9600, 4800, 2400. |
| 1.3.6.1.4.1.868.2.5.60.1.22.1.3 | ColumntnCesRS530ShutdownCallsOnFail | read-write | current | Whether to shutdown the CES connections using this port when the port fails. |
| 1.3.6.1.4.1.868.2.5.60.1.23 | TabletnCesRS530StatusTable | not-accessible | current | Table of RS530 serial port status. |
| 1.3.6.1.4.1.868.2.5.60.1.23.1 | RowtnCesRS530StatusEntry | not-accessible | current | Each entry has the current status of a RS530 serial port. |
| 1.3.6.1.4.1.868.2.5.60.1.23.1.1 | ColumntnCesRS530StatusNumber | not-accessible | current | The RS530 serial port number. |
| 1.3.6.1.4.1.868.2.5.60.1.23.1.2 | ColumntnCesRS530InterfaceType | read-only | current | Describes the type of physical interface used by the RS530 serial. |
| 1.3.6.1.4.1.868.2.5.60.1.23.1.3 | ColumntnCesRS530StatusDTR | read-only | current | Status of the RS530 serial port C/DTR lead. |
| 1.3.6.1.4.1.868.2.5.60.1.23.1.4 | ColumntnCesRS530StatusDCD | read-only | current | Status of the RS530 serial port I/DCD lead. |
| 1.3.6.1.4.1.868.2.5.60.1.23.1.5 | ColumntnCesRS530StatusRTS | read-only | current | Status of the RS530 serial port RTS lead. |
| 1.3.6.1.4.1.868.2.5.60.1.23.1.6 | ColumntnCesRS530StatusCTS | read-only | current | Status of the RS530 serial port CTS lead. |
| 1.3.6.1.4.1.868.2.5.60.1.23.1.7 | ColumntnCesRS530StatusDSR | read-only | current | Status of the RS530 serial port DSR lead. |
| 1.3.6.1.4.1.868.2.5.60.1.23.1.8 | ColumntnCesRS530LocalLoop | read-write | current | Whether the RS530 serial port local loop is enabled. |
| 1.3.6.1.4.1.868.2.5.60.1.23.1.9 | ColumntnCesRS530RemoteLoop | read-write | current | Whether the RS530 port remote loop is enabled. |
| 1.3.6.1.4.1.868.2.5.60.1.23.1.10 | ColumntnCesRS530BreakCalls | read-write | current | Set to true to break the CES connections or ISDN calls active on this port. |
| 1.3.6.1.4.1.868.2.5.60.2 | NodetnCesConformance | |||
| 1.3.6.1.4.1.868.2.5.60.2.1 | NodetnCesCompliances | |||
| 1.3.6.1.4.1.868.2.5.60.2.1.1 | CompliancetnCesMIBCompliance | current | You will comply. Respect my authority! | |
| 1.3.6.1.4.1.868.2.5.60.2.2 | NodetnCesGroups | |||
| 1.3.6.1.4.1.868.2.5.60.2.2.1 | GrouptnCesGroup | current | Objects which implement CES support on a device. | |
| 1.3.6.1.4.1.868.2.5.60.2.2.2 | GrouptnCesTrapGroup | current | Notifications which implement CES support on a device. |