TN-DEV-SYS-IP2-MIB
29 objects
The mib provides functionalities for managing the IP DHCP, IPv6 and DNS.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.5.10 | IdentitytnDevSysIpMgmtMIB | The mib provides functionalities for managing the IP DHCP, IPv6 and DNS. | ||
| 1.3.6.1.4.1.868.2.5.10.8 | NodetnDevSysIp2mgmt | |||
| 1.3.6.1.4.1.868.2.5.10.8.1 | ScalartnIp2Mode | read-write | current | Configure whether the IP stack should act as a Host or a Router. In Host mode, IP traffic between interfaces will not be routed. In Router mode traffic is rout… |
| 1.3.6.1.4.1.868.2.5.10.8.2 | NodetnIp2DnsConfig | |||
| 1.3.6.1.4.1.868.2.5.10.8.2.1 | ScalartnIp2DnsProxy | read-write | current | When DNS proxy is enabled, system will relay DNS requests to the currently configured DNS server, and reply as a DNS resolver to the client devices on the netw… |
| 1.3.6.1.4.1.868.2.5.10.8.2.2 | TabletnIp2DnsServerConfTable | not-accessible | current | Table to manage IP configuration. |
| 1.3.6.1.4.1.868.2.5.10.8.2.2.1 | RowtnIp2DnsServerConfEntry | not-accessible | current | An entry containing IP status for each device. |
| 1.3.6.1.4.1.868.2.5.10.8.2.2.1.1 | ColumntnIp2DnsServerIndex | not-accessible | current | DNS Server Instance. |
| 1.3.6.1.4.1.868.2.5.10.8.2.2.1.2 | ColumntnIp2DnsServerMode | read-write | current | This setting controls the DNS name resolution done by the switch. The following modes are supported: No DNS server: No DNS server will be used. staticIPv4 : Ex… |
| 1.3.6.1.4.1.868.2.5.10.8.2.2.1.3 | ColumntnIp2DnsServerAddr | read-write | current | The DNS IP address of the device. For a detailed description of this type, please refer to INET-ADDRESS-MIB. |
| 1.3.6.1.4.1.868.2.5.10.8.2.2.1.4 | ColumntnIp2DnsVlan | read-write | current | Specify from which DHCP-enabled interface a provided DNS server should be preferred. |
| 1.3.6.1.4.1.868.2.5.10.8.3 | TabletnIp2InterfaceTable | not-accessible | current | Table to manage IP Interfaces. |
| 1.3.6.1.4.1.868.2.5.10.8.3.1 | RowtnIp2InterfaceEntry | not-accessible | current | An entry containing IP status for each device. |
| 1.3.6.1.4.1.868.2.5.10.8.3.1.1 | ColumntnIp2IntVlan | not-accessible | current | The VLAN associated with the IP interface. Only ports in this VLAN will be able to access the IP interface. This field is only available for input when creatin… |
| 1.3.6.1.4.1.868.2.5.10.8.3.1.2 | ColumntnIp2IntDHCPEnable | read-create | current | Enable the DHCP client. If this option is enabled, the system will configure the IPv4 address and mask of the interface using the DHCP protocol. The DHCP clien… |
| 1.3.6.1.4.1.868.2.5.10.8.3.1.3 | ColumntnIp2IntFallback | read-create | current | The number of seconds for trying to obtain a DHCP lease. After this period expires, a configured IPv4 address will be used as IPv4 interface address. A value o… |
| 1.3.6.1.4.1.868.2.5.10.8.3.1.4 | ColumntnIp2AddrType | read-write | current | The IP address type of the device. For a detailed description of this type, please refer to INET-ADDRESS-MIB. |
| 1.3.6.1.4.1.868.2.5.10.8.3.1.5 | ColumntnIp2IntCurrentLease | read-create | current | For DHCP interfaces with an active lease, this column show the current interface address, as provided by the DHCP server. |
| 1.3.6.1.4.1.868.2.5.10.8.3.1.6 | ColumntnIp2Addr | read-create | current | The IPv4 address of the interface in dotted decimal notation. If DHCP is enabled, this field is not used. The field may also be left blank if IPv4 operation on… |
| 1.3.6.1.4.1.868.2.5.10.8.3.1.7 | ColumntnIp2MaskLen | read-create | current | The IPv4 network mask, in number of bits (prefix length). Valid values are between 0 and 30 bits for a IPv4 address. If DHCP is enabled, this field is not used… |
| 1.3.6.1.4.1.868.2.5.10.8.3.1.8 | ColumntnIp2Status | read-create | current | The status of this conceptual row entry of IP Interface table. This object is used to manage the creation and deletion of conceptual rows. The status column ha… |
| 1.3.6.1.4.1.868.2.5.10.8.4 | TabletnIp2RoutesTable | not-accessible | current | Table to manage IP Routes. |
| 1.3.6.1.4.1.868.2.5.10.8.4.1 | RowtnIp2RoutesEntry | not-accessible | current | An entry containing IP Routes. |
| 1.3.6.1.4.1.868.2.5.10.8.4.1.1 | ColumntnIp2RoutesNetwork | not-accessible | current | The destination IP network or host address of this route. Valid format is dotted decimal notationor a valid IPv6 notation. A default route can use the value 0.… |
| 1.3.6.1.4.1.868.2.5.10.8.4.1.2 | ColumntnIp2RoutesMaskLen | not-accessible | current | The destination IP network or host mask, in number of bits (prefix length). It defines how much of a network address that must match, in order to qualify for t… |
| 1.3.6.1.4.1.868.2.5.10.8.4.1.3 | ColumntnIp2RoutesGateway | not-accessible | current | The IP address of the IP gateway. Valid format is dotted decimal notation or a valid IPv6 notation. Gateway and Network must be of the same type. |
| 1.3.6.1.4.1.868.2.5.10.8.4.1.4 | ColumntnIp2RoutesNextHop | read-create | current | The VLAN ID (VID) of the specific IPv6 interface associated with the gateway. The given VID ranges from 1 to 4094 and will be effective only when the correspon… |
| 1.3.6.1.4.1.868.2.5.10.8.4.1.5 | ColumntnIp2RoutesType | read-create | current | The IP address type of the routes. For a detailed description of this type, please refer to INET-ADDRESS-MIB. |
| 1.3.6.1.4.1.868.2.5.10.8.4.1.6 | ColumntnIp2RoutesStatus | read-create | current | The status of this conceptual row entry of IP Interface table. This object is used to manage the creation and deletion of conceptual rows. The status column ha… |