TN-EVC-MIB
183 objects
TBD
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | ifIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress |
| Q-BRIDGE-MIB | PortList VlanId VlanIdOrAny VlanIdOrAnyOrNone VlanIdOrNone |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus StorageType TEXTUAL-CONVENTION TruthValue |
| TRANSITION-SMI | tnProducts |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.5.106 | IdentitytnEvcMib | TBD | ||
| 1.3.6.1.4.1.868.2.5.106.1 | NodetnEvcObjects | |||
| 1.3.6.1.4.1.868.2.5.106.1.1 | NodetnEvcCfgMgmtGroup | |||
| 1.3.6.1.4.1.868.2.5.106.1.1.1 | TabletnEvcPortTable | not-accessible | current | This table displays and sets current EVC port configurations. This table has a sparse depedent relationship on the ifTable, containing a row for each ifEntry h… |
| 1.3.6.1.4.1.868.2.5.106.1.1.1.1 | RowtnEvcPortEntry | not-accessible | current | This entry represents an EVC port configuration. |
| 1.3.6.1.4.1.868.2.5.106.1.1.1.1.1 | ColumntnEvcPortDEIMode | read-write | current | The DEI mode for an NNI port determines whether frames transmitted on the port will have the DEI field in the outer tag marked based on the colour of the frame… |
| 1.3.6.1.4.1.868.2.5.106.1.1.1.1.2 | ColumntnEvcPortTagMode | read-write | current | The inner tag type is used to determine whether an inner tag is inserted in frames forwarded to NNI ports. The possible values are: 'inner': An inner tag is no… |
| 1.3.6.1.4.1.868.2.5.106.1.1.1.1.3 | ColumntnEvcPortAddressMode | read-write | current | The IP/MAC address mode specifying whether the EVC classification must be based on source (SMAC/SIP) or destination (DMAC/DIP) addresses. The allowed values ar… |
| 1.3.6.1.4.1.868.2.5.106.1.1.2 | TabletnEvcTable | not-accessible | current | This table contains the configuration of EVC(Ethernet Virtual Circuit). |
| 1.3.6.1.4.1.868.2.5.106.1.1.2.1 | RowtnEvcEntry | not-accessible | current | This entry represents an EVC. Each entry in this table represents an EVC and can be created or deleted by the management system. |
| 1.3.6.1.4.1.868.2.5.106.1.1.2.1.1 | ColumntnEvcIndex | not-accessible | current | The identifier of the EVC. |
| 1.3.6.1.4.1.868.2.5.106.1.1.2.1.2 | ColumntnEvcNNIPortlist | read-create | current | The list of Network to Network Interfaces for the EVC. |
| 1.3.6.1.4.1.868.2.5.106.1.1.2.1.3 | ColumntnEvcVid | read-create | current | The VLAN ID in the PB network. It may be inserted in a C-tag, S-tag or S-custom tag depending on the NNI port VLAN configuration. The allowed range is from 1 t… |
| 1.3.6.1.4.1.868.2.5.106.1.1.2.1.4 | ColumntnEvcIVid | read-create | current | The Internal/classified VLAN ID in the PB network. The allowed range is from 1 through 4094 |
| 1.3.6.1.4.1.868.2.5.106.1.1.2.1.5 | ColumntnEvcLearning | read-create | current | The learning mode for the EVC controls whether source MAC addresses are learned for frames matching the EVC. Learning may be disabled if the EVC only includes … |
| 1.3.6.1.4.1.868.2.5.106.1.1.2.1.6 | ColumntnEvcInnerTagType | read-create | current | The inner tag type is used to determine whether an inner tag is inserted in frames forwarded to NNI ports. The allowed values are: None: An inner tag is not in… |
| 1.3.6.1.4.1.868.2.5.106.1.1.2.1.7 | ColumntnEvcInnerVidMode | read-create | current | The inner VID Mode affects the VID in the inner and outer tag. The allowed values are: normal: The VID of the two outer tags aren't swapped. tunnel: The VID of… |
| 1.3.6.1.4.1.868.2.5.106.1.1.2.1.8 | ColumntnEvcInnerVid | read-create | current | The Inner tag VLAN ID. The allowed range is from 0 through 4094. |
| 1.3.6.1.4.1.868.2.5.106.1.1.2.1.9 | ColumntnEvcInnerPCPDEIPreservation | read-create | current | The inner tag PCP and DEI preservation. The allowed values are: Preserved: The inner tag PCP and DEI is preserved. Fixed: The inner tag PCP and DEI is fixed. |
| 1.3.6.1.4.1.868.2.5.106.1.1.2.1.10 | ColumntnEvcInnerPCP | read-create | current | The inner tag PCP value. The allowed range is from 0 through 7. |
| 1.3.6.1.4.1.868.2.5.106.1.1.2.1.11 | ColumntnEvcInnerDEI | read-create | current | The inner tag DEI value. The allowed value is 0 or 1. |
| 1.3.6.1.4.1.868.2.5.106.1.1.2.1.12 | ColumntnEvcOuterVid | read-create | current | The Outer tag VLAN ID. The allowed range is from 0 through 4094. |
| 1.3.6.1.4.1.868.2.5.106.1.1.2.1.13 | ColumntnEvcStatus | read-create | current | The status of this conceptual row entry of EVC table. This object isused to manage the creation and deletion of conceptual rows. The status column has six defi… |
| 1.3.6.1.4.1.868.2.5.106.1.1.2.1.14 | ColumntnEvcPolicerID | read-create | current | The ingress bandwidth profile mode for the EVC. The possible values are: Specific: The allowed range is from 1 through 128. Discard: All received frames are di… |
| 1.3.6.1.4.1.868.2.5.106.1.1.2.1.15 | ColumntnEvcName | read-create | current | EVC Administrative Name. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3 | TabletnEvcEceTable | not-accessible | current | This table contains the configuration of EVC control entry. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1 | RowtnEvcEceEntry | not-accessible | current | This entry represents an ECE. The system automatically creates an entry when the system or the EMS/NMS creates a row in the cevcECETable. Likewise, the system … |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.1 | ColumntnEvcEceId | not-accessible | current | The identifier of the ECE. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.2 | ColumntnEvcEceNextEceId | read-create | current | Specify the created ECE is placed before which ECE. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.3 | ColumntnEvcEceUNIPortlist | read-create | current | The list of User to Network Interfaces for the ECE. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.4 | ColumntnEvcEceTagType | read-create | current | The tag type for the ECE. The possible values are: tagged: The ECE will match tagged frames only. untagged: The ECE will match untagged frames only. any: The E… |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.5 | ColumntnEvcEceTagVIDFilterType | read-create | current | The VLAN ID filter for matching the ECE. It only significant if tag type 'Tagged' is selected. The possible values are: any: No VLAN ID filter is specified. (V… |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.6 | ColumntnEvcEceTagVIDFilterVal | read-create | current | When 'Specific' is selected for the VLAN ID filter, you can enter a specific value. The allowed value is from 0 through 4094. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.7 | ColumntnEvcEceTagVIDFilterStart | read-create | current | When 'Range' is selected for the VLAN ID filter, you can enter a specific range. The allowed range start is from 0 through 4094. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.8 | ColumntnEvcEceTagVIDFilterEnd | read-create | current | When 'Range' is selected for the VLAN ID filter, you can enter a specific range. The allowed range end is from 0 through 4094. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.9 | ColumntnEvcEceTagPCP | read-create | current | The PCP value for mataching the ECE. It only significant if tag type 'Tagged' is selected. The possible values are: any: The ECE will match any PCP value(all b… |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.10 | ColumntnEvcEceTagDEI | read-create | current | The DEI value for mataching the ECE. It only significant if tag type 'Tagged' is selected. The allowed value is: 0, 1 or Any. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.11 | ColumntnEvcEceTagFrameType | read-create | current | The frame type for the ECE. The possible values are: any: The ECE will match any frame type. etype: The ECE will match Ethernet Type frames only. llc: The ECE … |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.12 | ColumntnEvcEceProtoType | read-create | current | The IP protocol for matching the ECE. The possible values are: any: No protocol filter is specified. (Protocol filter status is 'don't-care'.) udp: Specify the… |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.13 | ColumntnEvcEceProtoVal | read-create | current | When 'Specific' is selected for the protocol filter, you can enter a specific value. The allowed value is from 0 through 255. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.14 | ColumntnEvcEceDscpFilterType | read-create | current | The DSCP filter for matching the ECE. The possible values are: any: No DSCP filter is specified. (DSCP filter status is 'don't-care'.) specific: If you want to… |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.15 | ColumntnEvcEceDscpFilterVal | read-create | current | When 'Specific' is selected for the DSCP filter, you can enter a specific value. The allowed value is from 0 through 63. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.16 | ColumntnEvcEceDscpRangeStart | read-create | current | When 'Range' is selected for the DSCP filter, you can enter a specific range. The allowed range start is from 0 through 63. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.17 | ColumntnEvcEceDscpRangeEnd | read-create | current | When 'Range' is selected for the DSCP filter, you can enter a specific range. The allowed range end is from 0 through 63. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.18 | ColumntnEvcEceSrcPortFilterType | read-create | current | The TCP/UDP source port for matching the ECE. It only significant if protocol filter 'UDP' or 'TCP' is selected. The possible values are: any: No TCP/UDP sourc… |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.19 | ColumntnEvcEceSrcPortFilterNo | read-create | current | When 'Specific' is selected for the source port filter, you can enter a specific value. The allowed value is from 0 through 65535. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.20 | ColumntnEvcEceSrcPortRangeStart | read-create | current | When 'Range' is selected for the source port filter, you can enter a specific range. The allowed range start is from 0 through 65535. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.21 | ColumntnEvcEceSrcPortRangeEnd | read-create | current | When 'Range' is selected for the source port filter, you can enter a specific range. The allowed range end is from 0 through 65535. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.22 | ColumntnEvcEceDstPortFilterType | read-create | current | The TCP/UDP destination port for matching the ECE. It only significant if protocol filter 'UDP' or 'TCP' is selected. The possible values are: any: No TCP/UDP … |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.23 | ColumntnEvcEceDstPortFilterNo | read-create | current | When 'Specific' is selected for the destination port filter, you can enter a specific value. The allowed value is from 0 through 65535. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.24 | ColumntnEvcEceDstPortRangeStart | read-create | current | When 'Range' is selected for the destination port filter, you can enter a specific range. The allowed range start is from 0 through 65535. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.25 | ColumntnEvcEceDstPortRangeEnd | read-create | current | When 'Range' is selected for the destination port filter, you can enter a specific range. The allowed range end is from 0 through 65535. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.26 | ColumntnEvcEceIpv4DipSipFilter | read-create | current | The source/destination IP address for matching the ECE. It depend on by the port address mode, when port address mode is set to 'Source' then the field is used… |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.27 | ColumntnEvcEceIpv4DipSipAddr | read-create | current | When 'Host' or 'Network' is selected for the SIP/DIP filter, you can enter a specific host or network address. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.28 | ColumntnEvcEceIpv4DipSipMask | read-create | current | When 'Host' or 'Network' is selected for the SIP/DIP filter, you can enter a specific network mask. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.29 | ColumntnEvcEceIpv4Fragment | read-create | current | The IPv4 Fragment for matching the ECE. This involves the settings for the More Fragments (MF) bit and the Fragment Offset (FRAG OFFSET) field for an IPv4 fram… |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.30 | ColumntnEvcEceIpv6DipSipFilter | read-create | current | The source/destination IP address for matching the ECE. It depend on by the port address mode, when port address mode is set to 'Source' then the field is used… |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.31 | ColumntnEvcEceIpv6DipSipAddr | read-create | current | When 'Host' or 'Network' is selected for the SIP/DIP filter, you can enter a specific host or network address. When 'IPv6' is selected for the Frame Type, the … |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.32 | ColumntnEvcEceIpv6DipSipMask | read-create | current | When 'Host' or 'Network' is selected for the SIP/DIP filter, you can enter a specific network mask. When 'IPv6' is selected for the Frame Type, the field only … |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.33 | ColumntnEvcEceOuterMode | read-create | current | The outer tag PCP and DEI preservation for the ECE. The possible values are: enabled: Enable outer tag for nni-to-uni direction for the ECE. disabled: Disable … |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.34 | ColumntnEvcEceOuterPCPDEIPreserve | read-create | current | The outer tag PCP and DEI preservation for the ECE. The possible values are: preserved: The outer tag PCP and DEI is preserved. fixed: The outer tag PCP and DE… |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.35 | ColumntnEvcEceOuterPCP | read-create | current | The outer tag PCP value for the ECE. The allowed range is from 0 through 7. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.36 | ColumntnEvcEceOuterDEI | read-create | current | The outer tag DEI value for the ECE. The allowed value is 0 or 1. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.37 | ColumntnEvcEceActDirection | read-create | current | The EVCs and ECEs are used to setup flows in one or both directions as determined by the ECE Direction parameter. If the ECE is bidirectional, the ingress rule… |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.38 | ColumntnEvcEceActEvcidFilterType | read-create | current | The outer tag PCP and DEI preservation for the ECE. The possible values are: any: No EVC ID filter is specified. (EVC ID filter status is 'don't-care'.) specif… |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.39 | ColumntnEvcEceActEvcidVal | read-create | current | When 'Specific' is selected for the VLAN ID filter, you can enter a specific value. The allowed value is from 1 through 128. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.40 | ColumntnEvcEceActTagPopCount | read-create | current | The ingress tag pop count for the ECE. The allowed range is from 0 through 2. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.41 | ColumntnEvcEceActPolicyId | read-create | current | The ACL Policy ID for the ECE for matching ACL rules. The allowed range is from 0 through 255. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.42 | ColumntnEvcEceActClass | read-create | current | The traffic class for the ECE. The allowed range is from 0 through 8 or disabled. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.43 | ColumntnEvcEceDMacSMacFilterType | read-create | current | The source/destination MAC address for matching the ECE. It depend on by the port address mode, when port address mode is set to 'Source' then the field is use… |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.44 | ColumntnEvcEceDMacSMacVal | read-create | current | When 'Specific' is selected for the SMAC/DMAC filter, you can enter a specific value. The legal format is 'xx-xx-xx-xx-xx-xx' or 'xx.xx.xx.xx.xx.xx' or 'xxxxxx… |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.45 | ColumntnEvcEceDMacType | read-create | current | The destination MAC address for matching the ECE. The possible values are: any: No destination MAC address is specified. unicast: Frame must be unicast. multic… |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.46 | ColumntnEvcEceConflict | read-only | current | Indicates the hardware status of the specific ECE. The specific ECE is not applied to the hardware due to hardware limitations. |
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1.47 | ColumntnEvcEceStatus | read-create | current | The status of this conceptual row entry of ECE table. This object isused to manage the creation and deletion of conceptual rows. The status column has six defi… |
| 1.3.6.1.4.1.868.2.5.106.1.1.4 | TabletnEvcBandwidthProfilesTable | not-accessible | current | This entry displays and sets current EVC ingress bandwidth profile configurations. These policers may be used to limit the traffic received on UNI ports. |
| 1.3.6.1.4.1.868.2.5.106.1.1.4.1 | RowtnEvcBandwidthProfilesEntry | not-accessible | current | This entry represents an entry of EVC ingress bandwidth profile configuration. |
| 1.3.6.1.4.1.868.2.5.106.1.1.4.1.1 | ColumntnEvcBandwidthProfilesIndex | not-accessible | current | The EVC bandwidth profiles policer index. |
| 1.3.6.1.4.1.868.2.5.106.1.1.4.1.2 | ColumntnEvcBandwidthProfilesPolicerMode | read-create | current | The colour mode of the bandwidth profile. The allowed values are: coupled: Colour-aware mode with coupling enabled. aware: Colour-aware mode with coupling disa… |
| 1.3.6.1.4.1.868.2.5.106.1.1.4.1.3 | ColumntnEvcBandwidthProfilesCIR | read-create | current | The Committed Information Rate of the bandwidth profile. The allowed range is from 0 through 10,000,000 kilobit per second. |
| 1.3.6.1.4.1.868.2.5.106.1.1.4.1.4 | ColumntnEvcBandwidthProfilesCBS | read-create | current | The Committed Burst Size of the bandwidth profile. The allowed range is from 0 through 100,000 bytes. |
| 1.3.6.1.4.1.868.2.5.106.1.1.4.1.5 | ColumntnEvcBandwidthProfilesEIR | read-create | current | The Excess Information Rate of the bandwidth profile. The allowed range is from 0 through 10,000,000 kilobit per second. |
| 1.3.6.1.4.1.868.2.5.106.1.1.4.1.6 | ColumntnEvcBandwidthProfilesEBS | read-create | current | The Excess Burst Size of the bandwidth profile. The allowed range is from 0 through 100,000 bytes. |
| 1.3.6.1.4.1.868.2.5.106.1.1.4.1.7 | ColumntnEvcBandwidthProfilesState | read-create | current | The administrative state of the bandwidth profile. The allowed values are: enabled: The bandwidth profile enabled. disabled: The bandwidth profile is disabled. |
| 1.3.6.1.4.1.868.2.5.106.1.1.5 | TabletnEvcExtEceTable | not-accessible | current | This table contains the configuration of EVC control entry. |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1 | RowtnEvcExtEceEntry | not-accessible | current | This entry represents an ECE. The system automatically creates an entry when the system or the EMS/NMS creates a row in the cevcECETable. Likewise, the system … |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.1 | ColumntnEvcEceInnerTagType | read-create | current | The Inner tag type for the ECE. The possible values are: tagged: The ECE will match tagged frames only. untagged: The ECE will match untagged frames only. any:… |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.2 | ColumntnEvcEceInnerTagVIDFilterType | read-create | current | The Inner VLAN ID filter for matching the ECE. It only significant if tag type 'Tagged' is selected. The possible values are: any: No VLAN ID filter is specifi… |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.3 | ColumntnEvcEceInnerTagVIDFilterVal | read-create | current | When 'Specific' is selected for the Inner VLAN ID filter, you can enter a specific value. The allowed value is from 0 through 4094. |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.4 | ColumntnEvcEceInnerTagVIDFilterStart | read-create | current | When 'Range' is selected for the Inner VLAN ID filter, you can enter a specific range. The allowed range start is from 0 through 4094. |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.5 | ColumntnEvcEceInnerTagVIDFilterEnd | read-create | current | When 'Range' is selected for the Inner VLAN ID filter, you can enter a specific range. The allowed range end is from 0 through 4094. |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.6 | ColumntnEvcEceInnerTagPCP | read-create | current | The PCP value for matching the ECE. It only significant if tag type 'Tagged' is selected. The possible values are: any: The ECE will match any PCP value(all bi… |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.7 | ColumntnEvcEceInnerTagDEI | read-create | current | The DEI value for matching the ECE. It only significant if tag type 'Tagged' is selected. The allowed value is: 0, 1 or Any. |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.8 | ColumntnEvcEcePolicer | read-create | current | The ingress bandwidth profile mode for the EVC. The possible values are: Specific: The allowed range is from 1 through 128. Discard: All received frames are di… |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.9 | ColumntnEvcEceOuterVid | read-create | current | The EVC outer tag VID for UNI ports. The allowed value is from 0 through 4094. |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.10 | ColumntnEvcEceNNIInnerTagType | read-create | current | The inner type for the ECE determines whether an inner tag is inserted in frames forwarded to NNI ports.\ The possible values are: None: An inner tag is not in… |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.11 | ColumntnEvcEceInnerVid | read-create | current | The inner tag VLAN ID for the ECE. The allowed range is from 0 through 4094. |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.12 | ColumntnEvcEceInnerPCPDEIPreserve | read-create | current | The inner tag PCP and DEI preservation for the ECE. The possible values are: Preserved: The inner tag PCP and DEI is preserved. Fixed: The inner tag PCP and DE… |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.13 | ColumntnEvcEceInnerPCP | read-create | current | The inner tag PCP value for the ECE. The allowed range is from 0 through 7. |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.14 | ColumntnEvcEceInnerDEI | read-create | current | The inner tag DEI value for the ECE. The allowed value is 0 or 1. |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.15 | ColumntnEvcEceDMacVal | read-write | current | When 'Specific' is selected for the DMAC filter, you can enter a specific value. The legal format is 'xx-xx-xx-xx-xx-xx' or 'xx.xx.xx.xx.xx.xx' or 'xxxxxxxxxxx… |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.16 | ColumntnEvcEceOuterPCPMode | read-write | current | The outer tag PCP mode for the ECE. The possible values are: Classified: The outer tag PCP Mode is classified. Fixed: The outer tag PCP Mode is fixed. Mapped: … |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.17 | ColumntnEvcEceOuterDEIMode | read-write | current | The outer tag DEI mode for the ECE. The possible values are: Classified: The outer tag DEI mode is classified. Fixed: The outer tag DEI mode is fixed. Drop Pre… |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.18 | ColumntnEvcEceActRuleType | read-write | current | The rule type for the ECE. The possible values are: Both: Ingress and egress rule. RX: Ingress rule. TX: Egress rule. |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.19 | ColumntnEvcEceActTxLookupType | read-write | current | The TX lookup for the ECE. The possible values are: VID lookup: The TX lookup is based on VID. VID-PCP: The TX lookup is based on VID and PCP. ISDX: The TX loo… |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.20 | ColumntnEvcEceActDropPrecType | read-write | current | The drop precedence for the ECE. The allowed range is 0, 1 or disabled. |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.21 | ColumntnEvcEceInnerPcpMode | read-write | current | The inner tag PCP mode for the ECE. The possible values are: Classified: The inner tag PCP Mode is classified. Fixed: The inner tag PCP Mode is classified. Map… |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.22 | ColumntnEvcEceIInnerDeiMode | read-write | current | The inner tag DEI mode for the ECE. The possible values are: Classified: The inner tag DEI mode is classified. Fixed: The inner tag DEI mode is fixed. Drop Pre… |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.23 | ColumntnEvcEceIpv4DipFilter | read-write | current | The destination IP address for matching the ECE. The possible values are: Any: No DIP filter is specified. (DIP filter status is 'don't-care'.) Host: If you wa… |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.24 | ColumntnEvcEceIpv4DipAddr | read-write | current | When 'Host' or 'Network' is selected for the DIP filter, you can enter a specific host or network address. |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.25 | ColumntnEvcEceIpv4DipMask | read-write | current | When 'Host' or 'Network' is selected for the DIP filter, you can enter a specific network mask. |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.26 | ColumntnEvcEceIpv6DipFilter | read-write | current | The destination IP address for matching the ECE. The possible values are: Any: No DIP filter is specified. (DIP filter status is 'don't-care'.) Host: If you wa… |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.27 | ColumntnEvcEceIpv6DipAddr | read-write | current | When 'Host' or 'Network' is selected for the DIP filter, you can enter a specific host or network address. |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.28 | ColumntnEvcEceIpv6DipMask | read-write | current | When 'Host' or 'Network' is selected for the DIP filter, you can enter a specific network mask. |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.29 | ColumntnEvcEceLookup | read-write | current | The looup type for matching the ECE. The allowed values are: Basic: First lookup for basic classification. Advanced: Second lookup for advanced classification. |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.30 | ColumntnEvcEceEtypeFilter | read-write | current | The Ethernet type value for matching the ECE. The possible values are: Any: No Ethernet type value filter is specified. (Ethernet type filter status is 'don't-… |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.31 | ColumntnEvcEceEtypeValue | read-write | current | When 'Specific' is selected for the Ethernet type filter, you can enter a specific value. The allowed value is from 0x600 through 0xFFFF but exclude 0x0800(IPv… |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.32 | ColumntnEvcEceEtypeDataFilter | read-write | current | The Ethernet type data for matching the ECE. The possible values are: Any: No Ethernet type data filter is specified. (Ethernet type filter status is 'don't-ca… |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.33 | ColumntnEvcEceEtypeData | read-write | current | When 'Specific' is selected for the Ethernet type filter, you can enter a specific value. The allowed value is from 0x600 through 0xFFFF but exclude 0x0800(IPv… |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.34 | ColumntnEvcEceEtypeDataMask | read-write | current | When 'Specific' is selected for the Ethernet type data filter, you can enter a specific value. It is a pair of the Ethernet type data and its mask. The allowed… |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.35 | ColumntnEvcEceLlcDSAPFilter | read-write | current | The LLC DSAP for matching the ECE. The possible values are: Any: No LLC DSAP value filter is specified. (LLC DSAP filter status is 'don't-care'.) Specific: If … |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.36 | ColumntnEvcEceLlcDSAPValue | read-write | current | When 'Specific' is selected for the LLC DSAP filter, you can enter a specific value. The allowed value is from 0x0 through 0xFF |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.37 | ColumntnEvcEceLlcSSAPFilter | read-write | current | The LLC SSAP for matching the ECE. The possible values are: Any: No LLC SSAP value filter is specified. (LLC SSAP filter status is 'don't-care'.) Specific: If … |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.38 | ColumntnEvcEceLlcSSAPValue | read-write | current | When 'Specific' is selected for the LLC SSAP filter, you can enter a specific value. The allowed value is from 0x0 through 0xFF. |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.39 | ColumntnEvcEceLlcCtrlFilter | read-write | current | The LLC control for matching the ECE. The possible values are: Any: No LLC control value filter is specified. (LLC control filter status is 'don't-care'.) Spec… |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.40 | ColumntnEvcEceLlcCtrlValue | read-write | current | When 'Specific' is selected for the LLC control filter, you can enter a specific value. The allowed value is from 0x0 through 0xFF. |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.41 | ColumntnEvcEceLlcDataFilter | read-write | current | The LLC data for matching the ECE. The possible values are: Any: No LLC data filter is specified. (LLC filter status is 'don't-care'.) Specific: If you want to… |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.42 | ColumntnEvcEceLlcDataValue | read-write | current | When 'Specific' is selected for the LLC data filter, you can enter a specific value. It is a pair of the LLC data and its mask. The allowed value is from 0x0 t… |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.43 | ColumntnEvcEceLlcDataMask | read-write | current | When 'Specific' is selected for the LLC data filter, you can enter a specific mask. The allowed value is from 0x0 through 0xFFFF. |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.44 | ColumntnEvcEceSnapOuiFilter | read-write | current | The SNAP OUI for matching the ECE. The possible values are: Any: No SNAP OUI value filter is specified. (SNAP OUI filter status is 'don't-care'.) Specific: If … |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.45 | ColumntnEvcEceSnapOuiValue | read-write | current | When 'Specific' is selected for the SNAP OUI filter, you can enter a specific value. The allowed value is from 00-00-00 through FF-FF-FF. |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.46 | ColumntnEvcEceSnapPidFilter | read-write | current | The SNAP PID for matching the ECE. The possible values are: Any: No SNAP PID value filter is specified. (SNAP PID filter status is 'don't-care'.) Specific: If … |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.47 | ColumntnEvcEceSnapPidValue | read-write | current | When 'Specific' is selected for the SNAP PID filter, you can enter a specific value. The allowed value is from 0x0 through 0xFFFF. |
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1.48 | ColumntnEvcEceL2cpProtoType | read-write | current | The L2CP type for the ECE. The possible values are: STP/RSTP/MSTP: Match STP/RSTP/MSTP frames. Pause: Match Pause frames. LACP: Match LACP frames. LAMP: Match … |
| 1.3.6.1.4.1.868.2.5.106.1.2 | NodetnEvcStatGroup | |||
| 1.3.6.1.4.1.868.2.5.106.1.2.1 | TabletnEvcStatTable | not-accessible | current | This table provides NNI port traffic statistics for the selected EVC. It also shows counters for UNI ports of ECEs mapping to the EVC. |
| 1.3.6.1.4.1.868.2.5.106.1.2.1.1 | RowtnEvcStatEntry | not-accessible | current | This entry represents an entry of EVC statistics. |
| 1.3.6.1.4.1.868.2.5.106.1.2.1.1.1 | ColumntnEvcStatClass | not-accessible | current | The traffic class for the EVC. |
| 1.3.6.1.4.1.868.2.5.106.1.2.1.1.2 | ColumntnEvcStatGreenFrameRx | read-only | current | The number of green received. |
| 1.3.6.1.4.1.868.2.5.106.1.2.1.1.3 | ColumntnEvcStatGreenFrameTx | read-only | current | The number of green transmitted. |
| 1.3.6.1.4.1.868.2.5.106.1.2.1.1.4 | ColumntnEvcStatYellowFrameRx | read-only | current | The number of yellow received. |
| 1.3.6.1.4.1.868.2.5.106.1.2.1.1.5 | ColumntnEvcStatYellowFrameTx | read-only | current | The number of yellow transmitted. |
| 1.3.6.1.4.1.868.2.5.106.1.2.1.1.6 | ColumntnEvcStatRedFrameRx | read-only | current | The number of red received. |
| 1.3.6.1.4.1.868.2.5.106.1.2.1.1.7 | ColumntnEvcStatDiscardGreenFrame | read-only | current | The number of discarded in the green color. |
| 1.3.6.1.4.1.868.2.5.106.1.2.1.1.8 | ColumntnEvcStatDiscardYellowFrame | read-only | current | The number of discarded in the yellow color. |
| 1.3.6.1.4.1.868.2.5.106.1.2.1.1.9 | ColumntnEvcStatClear | read-write | current | Clears the counters for selected ports when the value of tnEvcStatClear is true. |
| 1.3.6.1.4.1.868.2.5.106.1.2.2 | TabletnEvcExtStatTable | not-accessible | current | This table provides port traffic statistics for the selected EVC. It also shows counters for UNI ports of ECEs mapping to the EVC. |
| 1.3.6.1.4.1.868.2.5.106.1.2.2.1 | RowtnEvcExtStatEntry | not-accessible | current | This entry represents an entry of EVC statistics. |
| 1.3.6.1.4.1.868.2.5.106.1.2.2.1.1 | ColumntnEvcExtStatType | not-accessible | current | The traffic class for the EVC. |
| 1.3.6.1.4.1.868.2.5.106.1.2.2.1.2 | ColumntnEvcExtStatIndex | not-accessible | current | The EVC or ECE index. |
| 1.3.6.1.4.1.868.2.5.106.1.2.2.1.3 | ColumntnEvcExtStatPort | not-accessible | current | The EVC or ECE index. |
| 1.3.6.1.4.1.868.2.5.106.1.2.2.1.4 | ColumntnEvcExtStatGreenFrameRx | read-only | current | The number Frames of green received. |
| 1.3.6.1.4.1.868.2.5.106.1.2.2.1.5 | ColumntnEvcExtStatGreenFrameTx | read-only | current | The number Frames of green transmitted. |
| 1.3.6.1.4.1.868.2.5.106.1.2.2.1.6 | ColumntnEvcExtStatGreenBytesRx | read-only | current | The number Bytes of green received. |
| 1.3.6.1.4.1.868.2.5.106.1.2.2.1.7 | ColumntnEvcExtStatGreenBytesTx | read-only | current | The number Bytes of green transmitted. |
| 1.3.6.1.4.1.868.2.5.106.1.2.2.1.8 | ColumntnEvcExtStatYellowFrameRx | read-only | current | The number Frames of yellow received. |
| 1.3.6.1.4.1.868.2.5.106.1.2.2.1.9 | ColumntnEvcExtStatYellowFrameTx | read-only | current | The number Frames of yellow transmitted. |
| 1.3.6.1.4.1.868.2.5.106.1.2.2.1.10 | ColumntnEvcExtStatYellowBytesRx | read-only | current | The number Bytes of yellow received. |
| 1.3.6.1.4.1.868.2.5.106.1.2.2.1.11 | ColumntnEvcExtStatYellowBytesTx | read-only | current | The number Bytes of yellow transmitted. |
| 1.3.6.1.4.1.868.2.5.106.1.2.2.1.12 | ColumntnEvcExtStatRedFrameRx | read-only | current | The number Frames of red received. |
| 1.3.6.1.4.1.868.2.5.106.1.2.2.1.13 | ColumntnEvcExtStatRedBytesRx | read-only | current | The number Bytes of red received. |
| 1.3.6.1.4.1.868.2.5.106.1.2.2.1.14 | ColumntnEvcExtStatDiscardFrameRx | read-only | current | The number Frames of discarded received. |
| 1.3.6.1.4.1.868.2.5.106.1.2.2.1.15 | ColumntnEvcExtStatDiscardFrameTx | read-only | current | The number Frames of discarded transmitted. |
| 1.3.6.1.4.1.868.2.5.106.1.2.2.1.16 | ColumntnEvcExtStatDiscardBytesRx | read-only | current | The number Bytes of discarded received. |
| 1.3.6.1.4.1.868.2.5.106.1.2.2.1.17 | ColumntnEvcExtStatDiscardBytesTx | read-only | current | The number Bytes of discarded transmitted. |
| 1.3.6.1.4.1.868.2.5.106.1.2.2.1.18 | ColumntnEvcExtStatclear | read-write | current | Clear the value by EVC or ECE index. |
| 1.3.6.1.4.1.868.2.5.106.1.3 | NodetnEvcL2cpMgmtGroup | |||
| 1.3.6.1.4.1.868.2.5.106.1.3.3 | TabletnEvcL2cpCfgTable | not-accessible | current | This table supports L2CP settings. |
| 1.3.6.1.4.1.868.2.5.106.1.3.3.1 | RowtnEvcL2cpCfgEntry | not-accessible | current | L2CP settings table entry. |
| 1.3.6.1.4.1.868.2.5.106.1.3.3.1.1 | ColumntnEvcL2cpCfgInterfaceNumber | not-accessible | current | Sets L2CP interface number. |
| 1.3.6.1.4.1.868.2.5.106.1.3.3.1.2 | ColumntnEvcL2cpCfgIndex | not-accessible | current | Sets L2CP index number on an interface. |
| 1.3.6.1.4.1.868.2.5.106.1.3.3.1.3 | ColumntnEvcL2cpCfgType | read-create | current | Sets L2CP type setting. |
| 1.3.6.1.4.1.868.2.5.106.1.3.3.1.4 | ColumntnEvcL2cpCfgMatchScope | read-create | current | Sets L2CP selection matching scope. |
| 1.3.6.1.4.1.868.2.5.106.1.3.3.1.5 | ColumntnEvcL2cpCfgMacAddress | read-create | current | Sets L2CP Destination MAC address. |
| 1.3.6.1.4.1.868.2.5.106.1.3.3.1.6 | ColumntnEvcL2cpCfgProtocol | read-create | current | Sets L2CP protocol. |
| 1.3.6.1.4.1.868.2.5.106.1.3.3.1.7 | ColumntnEvcL2cpCfgSubType | read-create | current | Sets L2CP subtype for the protocol selected. |
| 1.3.6.1.4.1.868.2.5.106.1.3.3.1.8 | ColumntnEvcL2cpCfgEvcName | read-create | current | Sets L2CP EVC association. |
| 1.3.6.1.4.1.868.2.5.106.1.3.3.1.9 | ColumntnEvcL2cpCfgValid | read-create | current | Sets L2CP valid instance. |
| 1.3.6.1.4.1.868.2.5.106.1.3.3.1.10 | ColumntnEvcL2cpCfgRowStatus | read-create | current | The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.3.6.1.4.1.868.2.5.106.1.8 | NodetnEvcConformance | |||
| 1.3.6.1.4.1.868.2.5.106.1.8.1 | NodetnEvcGroups | |||
| 1.3.6.1.4.1.868.2.5.106.1.8.1.1 | GrouptnEvcPortConfigGroup | current | The collection of objects which are used to configure or describe the configuration or behavior of the S3280. | |
| 1.3.6.1.4.1.868.2.5.106.1.8.1.2 | GrouptnEvcJaguarPortConfigGroup | current | The collection of objects which are used to configure or describe the configuration or behavior of the S4140. | |
| 1.3.6.1.4.1.868.2.5.106.1.8.1.3 | GrouptnEvcTableGroup | current | The collection of objects which are used to configure or describe the configuration or behavior of the S4140. |