TN-LINK-OAM-MIB
57 objects
The mib module for managing Link OAM.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.5.140 | IdentitytnLinkOamMIB | The mib module for managing Link OAM. | ||
| 1.3.6.1.4.1.868.2.5.140.0 | NodetnLinkOamNotifications | |||
| 1.3.6.1.4.1.868.2.5.140.1 | NodetnLinkOamObjects | |||
| 1.3.6.1.4.1.868.2.5.140.1.1 | TabletnLinkOamPortConfigTable | not-accessible | current | This table allows the user to inspect the current Link OAM port configurations, and change them as well. |
| 1.3.6.1.4.1.868.2.5.140.1.1.1 | RowtnLinkOamPortConfigEntry | not-accessible | current | An entry in the table that contains information of OAM port configurations. |
| 1.3.6.1.4.1.868.2.5.140.1.1.1.1 | ColumntnLinkOamLoopbackSupport | read-write | current | Controls whether the loopback support is enabled for the switch port. Link OAM remote loopback can be used for fault localization and link performance testing.… |
| 1.3.6.1.4.1.868.2.5.140.1.1.1.2 | ColumntnLinkOamLinkMonitorSupport | read-write | current | Controls whether the Link Monitor support is enabled for the switch port. On enabling the Link Monitor support, the DTE supports event notification that permit… |
| 1.3.6.1.4.1.868.2.5.140.1.1.1.3 | ColumntnLinkMIBRetrievalSupport | read-write | current | Controls whether the MIB Retrieval Support is enabled for the switch port. On enabling the MIB retrieval support, the DTE supports polling of various Link OAM … |
| 1.3.6.1.4.1.868.2.5.140.1.1.1.4 | ColumntnLinkOamLoopbackOperation | read-write | current | If the Loopback support is enabled, enabling this field will start a loopback operation for the port. |
| 1.3.6.1.4.1.868.2.5.140.1.2 | TabletnLinkOamStatisticsTable | not-accessible | current | This table contains statistics for the OAM function on a particular Ethernet-like interface. There is an entry in the table for every entry in the tnLinkOamTab… |
| 1.3.6.1.4.1.868.2.5.140.1.2.1 | RowtnLinkOamStatisticsEntry | not-accessible | current | An entry in the table containing statistics information on the Ethernet OAM function for a single Ethernet-like interface. |
| 1.3.6.1.4.1.868.2.5.140.1.2.1.1 | ColumntnLinkOamLinkfaultPDUsRx | read-only | current | A count of the number of Link fault PDU's received. |
| 1.3.6.1.4.1.868.2.5.140.1.2.1.2 | ColumntnLinkOamLinkfaultPDUsTx | read-only | current | A count of the number of Link fault PDU's transmitted. |
| 1.3.6.1.4.1.868.2.5.140.1.2.1.3 | ColumntnLinkOamDyingGaspRx | read-only | current | A count of the number of Dying Gasp events received. |
| 1.3.6.1.4.1.868.2.5.140.1.2.1.4 | ColumntnLinkOamDyingGaspTx | read-only | current | A count of the number of Dying Gasp events transmitted. |
| 1.3.6.1.4.1.868.2.5.140.1.2.1.5 | ColumntnLinkOamCriticalEventPDUsRx | read-only | current | A count of the number of Critical event PDU's received. |
| 1.3.6.1.4.1.868.2.5.140.1.2.1.6 | ColumntnLinkOamCriticalEventPDUsTx | read-only | current | A count of the number of Critical event PDU's transmitted. |
| 1.3.6.1.4.1.868.2.5.140.1.3 | TabletnLinkOamLocalPortConfigStatusTable | not-accessible | current | This table provides Local Link OAM configuration operational status. |
| 1.3.6.1.4.1.868.2.5.140.1.3.1 | RowtnLinkOamLocalPortConfigStatusEntry | not-accessible | current | An entry in the table containing information of Peer Link OAM configuration operational status. |
| 1.3.6.1.4.1.868.2.5.140.1.3.1.1 | ColumntnLinkOamPDUPermission | read-only | current | This field is available only for the Local DTE. It displays the current permission rules set for the local DTE. Possible values are 'Link fault', 'Receive only… |
| 1.3.6.1.4.1.868.2.5.140.1.3.1.2 | ColumntnLinkOamLocalMultiplexerState | read-only | current | When in forwarding state, the Device is forwarding non-OAMPDUs to the lower sublayer. Incase of discarding, the device discards all the non-OAMPDU's. |
| 1.3.6.1.4.1.868.2.5.140.1.3.1.3 | ColumntnLinkOamLocalParserState | read-only | current | When in forwarding state, Device is forwarding non-OAMPDUs to higher sublayer. When in loopback, Device is looping back non-OAMPDUs to the lower sublayer. When… |
| 1.3.6.1.4.1.868.2.5.140.1.3.1.4 | ColumntnLinkOamLocalOrganizationalUniqueIdentifi | read-only | current | 24-bit Organizationally Unique Identifier of the vendor. |
| 1.3.6.1.4.1.868.2.5.140.1.4 | TabletnLinkOamPeerPortConfigStatusTable | not-accessible | current | This table provides Peer Link OAM configuration operational status. |
| 1.3.6.1.4.1.868.2.5.140.1.4.1 | RowtnLinkOamPeerPortConfigStatusEntry | not-accessible | current | An entry in the table containing information of Peer Link OAM configuration operational status. |
| 1.3.6.1.4.1.868.2.5.140.1.4.1.1 | ColumntnLinkOamPeerMultiplexerState | read-only | current | When in forwarding state, the Device is forwarding non-OAMPDUs to the lower sublayer. Incase of discarding, the device discards all the non-OAMPDU's. |
| 1.3.6.1.4.1.868.2.5.140.1.4.1.2 | ColumntnLinkOamPeerParserState | read-only | current | When in forwarding state, Device is forwarding non-OAMPDUs to higher sublayer. When in loopback, Device is looping back non-OAMPDUs to the lower sublayer. When… |
| 1.3.6.1.4.1.868.2.5.140.1.4.1.3 | ColumntnLinkOamPeerOrganizationalUniqueIdentifi | read-only | current | 24-bit Organizationally Unique Identifier of the vendor. |
| 1.3.6.1.4.1.868.2.5.140.1.5 | TabletnLinkOamLinkEventStatusTable | not-accessible | current | This table shows frame error status. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1 | RowtnLinkOamLinkEventStatusEntry | not-accessible | current | An entry in the table containing information of frame error status. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.1 | ColumntnLinkOamLocationIndex | not-accessible | current | The index of the loacation of the OAM unit event status accessed. When the value of index is '1', the table will display the Event status for the Local OAM uni… |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.2 | ColumntnLinkOamSequenceNumber | read-only | current | This two-octet field indicates the total number of events occurred at the remote end. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.3 | ColumntnLinkOamFrameErrorEventTimestamp | read-only | current | This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.4 | ColumntnLinkOamFrameErrorEventWindow | read-only | current | This two-octet field indicates the duration of the period in terms of 100 ms intervals. 1) The default value is one second. 2) The lower bound is one second. 3… |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.5 | ColumntnLinkOamFrameErrorEventThreshold | read-only | current | This four-octet field indicates the number of detected errored frames in the period is required to be equal to or greater than in order for the event to be gen… |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.6 | ColumntnLinkOamFrameErrors | read-only | current | This four-octet field indicates the number of detected errored frames in the period. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.7 | ColumntnLinkOamTotalFrameErrors | read-only | current | This eight-octet field indicates the sum of errored frames that have been detected since the OAM sublayer was reset. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.8 | ColumntnLinkOamTotalFrameErrorEvents | read-only | current | This four-octet field indicates the number of Errored Frame Event TLVs that have been generated since the OAM sublayer was reset. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.9 | ColumntnLinkOamFramePeriodErrorEventTimestamp | read-only | current | This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.10 | ColumntnLinkOamFramePeriodErrorEventWindow | read-only | current | This four-octet field indicates the duration of period in terms of frames. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.11 | ColumntnLinkOamFramePeriodErrorEventThreshold | read-only | current | This four-octet field indicates the number of errored frames in the period is required to be equal to or greater than in order for the event to be generated. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.12 | ColumntnLinkOamFramePeriodsErrors | read-only | current | This four-octet field indicates the number of frame errors in the period. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.13 | ColumntnLinkOamTotalFramePeriodsErrors | read-only | current | This eight-octet field indicates the sum of frame errors that have been detected since the OAM sublayer was reset. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.14 | ColumntnLinkOamTotalFramePerioderrorEvents | read-only | current | This four-octet field indicates the number of Errored Frame Period Event TLVs that have been generated since the OAM sublayer was reset. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.15 | ColumntnLinkOamSymbolPeriodErrorEventTimestamp | read-only | current | This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.16 | ColumntnLinkOamSymbolPeriodErrorEventWindow | read-only | current | This eight-octet field indicates the number of symbols in the period. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.17 | ColumntnLinkOamSymbolPeriodErrorEventThreshold | read-only | current | This eight-octet field indicates the number of errored symbols in the period is required to be equal to or greater than in order for the event to be generated. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.18 | ColumntnLinkOamSymbolPeriodsErrors | read-only | current | This eight-octet field indicates the number of symbol errors in the period. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.19 | ColumntnLinkOamSymbolFramePeriodErrors | read-only | current | This eight-octet field indicates the sum of symbol errors since the OAM sublayer was reset. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.20 | ColumntnLinkOamTotalSymbolFramePerioderrorEvents | read-only | current | This four-octet field indicates the number of Errored Symbol Period Event TLVs that have been generated since the OAM sublayer was reset. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.21 | ColumntnLinkOamEventSecondsSummaryTimestamp | read-only | current | This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals, encoded as a 16-bit unsigned integer. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.22 | ColumntnLinkOamEventSecondsSummaryWindow | read-only | current | This two-octet field indicates the duration of the period in terms of 100 ms intervals, encoded as a 16-bit unsigned integer. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.23 | ColumntnLinkOamEventSecondsSummaryThreshold | read-only | current | This two-octet field indicates the number of errored frame seconds in the period is required to be equal to or greater than in order for the event to be genera… |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.24 | ColumntnLinkOamEventSecondsSummarysEvents | read-only | current | This two-octet field indicates the number of errored frame seconds in the period, encoded as a 16-bit unsigned integer. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.25 | ColumntnLinkOamEventSecondsSummaryErrorTotal | read-only | current | This four-octet field indicates the sum of errored frame seconds that have been detected since the OAM sublayer was reset. |
| 1.3.6.1.4.1.868.2.5.140.1.5.1.26 | ColumntnLinkOamTotalEventSecondsSummaryEventTotal | read-only | current | This four-octet field indicates the number of Errored Frame Seconds Summary Event TLVs that have been generated since the OAM sublayer was reset, encoded as a … |
| 1.3.6.1.4.1.868.2.5.140.2 | NodetnLinkOamConformance |