TN-MGMT-MIB
157 objects
The mib module for managing all transition products.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.5.3 | IdentitytnMgmtMIB | The mib module for managing all transition products. | ||
| 1.3.6.1.4.1.868.2.5.3.0 | NodetnMgmtNotifications | |||
| 1.3.6.1.4.1.868.2.5.3.0.1 | NotificationtnDMIRxIntrusionEvt | current | A tnDMIRxIntrusionEvt event is sent if the tnDMIRxPowerLevel falls below the tnDMIRxPwrLvlPreset indicating an intrusion on the fiber. | |
| 1.3.6.1.4.1.868.2.5.3.0.2 | NotificationtnDMIRxPowerEvt | current | A tnDMIRxPowerEvt event is sent when there is a warning or alarm on Rx Power. | |
| 1.3.6.1.4.1.868.2.5.3.0.3 | NotificationtnDMITxPowerEvt | current | A tnDMITxPowerEvt event is sent when there is a warning or alarm on Tx Power. | |
| 1.3.6.1.4.1.868.2.5.3.0.4 | NotificationtnDMITxBiasEvt | current | A tnDMITxBiasEvt event is sent when there is a warning or alarm on Tx Bias current. | |
| 1.3.6.1.4.1.868.2.5.3.0.5 | NotificationtnDMITemperatureEvt | current | A tnDMITemperatureEvt event is sent when there is a warning or alarm on DMI temperature. | |
| 1.3.6.1.4.1.868.2.5.3.0.7 | NotificationtnDyingGaspEvt | current | when the device lost power, this dying gasp trap will be sent out. | |
| 1.3.6.1.4.1.868.2.5.3.0.8 | NotificationtnIfLimitDynMACEvt | current | This event is trigger when a port which has Limit control on dynamic MAC is enabled and the limit is reached. | |
| 1.3.6.1.4.1.868.2.5.3.0.9 | NotificationtnMgmtMibBoardTmpNotif | current | A tnMgmtMibBoardTmpNotif will be sent out will be sent out when temperature of board is out of controlled range (TO BE CONTINUED). | |
| 1.3.6.1.4.1.868.2.5.3.0.10 | NotificationtnMgmtMibCPUTmpNotif | current | A tnMgmtMibCPUTmpNotif will be sent out when temperature of CPU is out of controlled range (TO BE CONTINUED). | |
| 1.3.6.1.4.1.868.2.5.3.1 | NodetnMgmtObjects | |||
| 1.3.6.1.4.1.868.2.5.3.1.1 | NodetnDevMgmt | |||
| 1.3.6.1.4.1.868.2.5.3.1.1.1 | NodetnDevSysMgmt | |||
| 1.3.6.1.4.1.868.2.5.3.1.1.1.1 | TabletnDevSysCfgTable | not-accessible | current | This table supplements the ENTITY-MIB for each device managed by this Agent. |
| 1.3.6.1.4.1.868.2.5.3.1.1.1.1.1 | RowtnDevSysCfgEntry | not-accessible | current | A entry in the table contains additional information related to a device. |
| 1.3.6.1.4.1.868.2.5.3.1.1.1.1.1.1 | ColumntnDevSysName | read-write | current | A user-defined string for this device. This can be used to unique identity the device for the user.Some devices may support less than the maximum length specif… |
| 1.3.6.1.4.1.868.2.5.3.1.1.1.1.1.2 | ColumntnDevSysUptime | read-only | current | The device's system uptime in milliseconds if supported, 0 otherwise. |
| 1.3.6.1.4.1.868.2.5.3.1.1.1.1.1.3 | ColumntnDevSysUptimeReset | read-write | current | The device's 'tnDevSysUptime' can be reset. |
| 1.3.6.1.4.1.868.2.5.3.1.1.1.1.1.4 | ColumntnDevSysReset | read-write | current | The device can be reset or rebooted by setting this mib variable. running(1) - is a read-only value returned when the system is operational. coldStart(2) - Thi… |
| 1.3.6.1.4.1.868.2.5.3.1.1.1.1.1.5 | ColumntnDevNumOfPorts | read-only | current | This number of ports on this device. |
| 1.3.6.1.4.1.868.2.5.3.1.1.1.1.1.6 | ColumntnDevClearCounters | read-write | current | This mib variable can reset all system counters including port counters. |
| 1.3.6.1.4.1.868.2.5.3.1.1.1.1.1.7 | ColumntnDevResetToFactoryConfig | read-write | current | This mib variable can reset all system configuration to as it was shipped from the factory. |
| 1.3.6.1.4.1.868.2.5.3.1.1.1.1.1.8 | ColumntnDevConfigurationMode | read-only | current | This shows the configuration mode of the device. The device may have a jumper or switch that disables software management of the device. When Configuration Mod… |
| 1.3.6.1.4.1.868.2.5.3.1.1.1.1.1.9 | ColumntnDevConsoleAccess | read-write | current | This shows the configuration mode of the device's console access. Some of the device's have console interface through a USB port or a serial RS232 port through… |
| 1.3.6.1.4.1.868.2.5.3.1.1.1.1.1.10 | ColumntnDevSharedPortMode | read-write | current | This shows the configuration about the mode of shared port. internal : Shared Port used as internal external : Shared Port used as external |
| 1.3.6.1.4.1.868.2.5.3.1.1.1.2 | TabletnDevSysHwInforTable | not-accessible | current | This table shows the information of hardware. |
| 1.3.6.1.4.1.868.2.5.3.1.1.1.2.1 | RowtnDevSysHwInforEntry | not-accessible | current | A entry in the table contains additional information related to a device. |
| 1.3.6.1.4.1.868.2.5.3.1.1.1.2.1.1 | ColumntnDevSysHwInforChipID | read-only | current | Indicates the ID of Chip. |
| 1.3.6.1.4.1.868.2.5.3.1.1.1.2.1.2 | ColumntnDevSysHwInforBoardRev | read-only | current | Indicates the reversion of Board . |
| 1.3.6.1.4.1.868.2.5.3.1.1.1.2.1.3 | ColumntnDevSysHwInforFPGAVer | read-only | current | Indicates the version of FPGA. |
| 1.3.6.1.4.1.868.2.5.3.1.1.1.2.1.4 | ColumntnDevSysHwInforBoardtmp | read-only | current | Indicates the temperature of Board. |
| 1.3.6.1.4.1.868.2.5.3.1.1.1.2.1.5 | ColumntnDevSysHwInforCPUtmp | read-only | current | Indicates the temperature of CPU. |
| 1.3.6.1.4.1.868.2.5.3.1.1.2 | NodetnDevSysLPT | |||
| 1.3.6.1.4.1.868.2.5.3.1.1.2.1 | TabletnDevSysLPTTable | not-accessible | current | This table supplements the ENTITY-MIB for 2-port devices managed by this Agent. |
| 1.3.6.1.4.1.868.2.5.3.1.1.2.1.1 | RowtnDevSysLPTEntry | not-accessible | current | A entry in the table contains additional information related to a device. |
| 1.3.6.1.4.1.868.2.5.3.1.1.2.1.1.1 | ColumntnSysLinkPassThro | read-write | current | Devices which support this feature allow write for enabling or disabling the feature. Most 2-port devices support this feature. Link pass through when enabled … |
| 1.3.6.1.4.1.868.2.5.3.1.1.2.1.1.2 | ColumntnSysTransparentLPT | read-write | current | Devices which support this feature allow write for enabling or disabling the feature. Some of the 2-port devices which are capable of remote management of a si… |
| 1.3.6.1.4.1.868.2.5.3.1.1.2.1.1.3 | ColumntnSysSelectiveLPT | read-write | current | Devices which support this feature allow write for enabling or disabling the feature. Some of the 2-port devices which are capable of remote management of a si… |
| 1.3.6.1.4.1.868.2.5.3.1.1.2.1.1.4 | ColumntnSysLPTMonitorPort | read-write | current | This mib variable is applicable only when the device supports 'tnSysSelectiveLPT' and/or 'tnSysTransparentLPT'. This determines which port is monitored for act… |
| 1.3.6.1.4.1.868.2.5.3.1.1.2.1.1.5 | ColumntnSysRemoteFaultDetect | read-write | current | This mib variable is applicable only for some of the devices. When set to enabled(1), loss of fiber receive causes twisted pair interface to be disabled, and l… |
| 1.3.6.1.4.1.868.2.5.3.1.1.3 | NodetnDevSysDyingGasp | |||
| 1.3.6.1.4.1.868.2.5.3.1.1.3.1 | TabletnDevSysDyingGaspTable | not-accessible | current | This table supplements the ENTITY-MIB for 2-port devices managed by this Agent. |
| 1.3.6.1.4.1.868.2.5.3.1.1.3.1.1 | RowtnDevSysDyingGaspEntry | not-accessible | current | A entry in the table contains additional information related to a device. |
| 1.3.6.1.4.1.868.2.5.3.1.1.3.1.1.1 | ColumntnSysDyingGaspTrap | read-write | current | Devices which support this feature allow write for enabling or disabling the feature. When a device detects the power is going to be lost, a system dying gasp … |
| 1.3.6.1.4.1.868.2.5.3.1.1.4 | NodetnDevSysMACLearning | |||
| 1.3.6.1.4.1.868.2.5.3.1.1.4.1 | TabletnDevSysMacLearningTable | not-accessible | current | This table contols the device MAC address learning ability. |
| 1.3.6.1.4.1.868.2.5.3.1.1.4.1.1 | RowtnDevSysMacLearningEntry | not-accessible | current | A entry in the table contains additional information related to a device. |
| 1.3.6.1.4.1.868.2.5.3.1.1.4.1.1.1 | ColumntnSysPortMacLearningState | read-write | current | This indicates the port's state on MAC learning. If the bit corresponding to the port is set, then learning is enabled else it is disabled. |
| 1.3.6.1.4.1.868.2.5.3.1.2 | NodetnInterfaceMgmt | |||
| 1.3.6.1.4.1.868.2.5.3.1.2.1 | TabletnEthInterfaceTable | not-accessible | current | This table supplements the ifTable in IF-MIB and ifMauAutoNegTable in MAU-MIB for Ethernet interfaces. |
| 1.3.6.1.4.1.868.2.5.3.1.2.1.1 | RowtnEthInterfaceEntry | not-accessible | current | A entry in the table contains additional information related to an Ethernet interface. |
| 1.3.6.1.4.1.868.2.5.3.1.2.1.1.1 | ColumntnEthInterfaceSpeed | read-write | current | When autonegotiation is disabled, this can be used to set the interface speed. Refer the MAU-MIB is used for autonegotiation configuration. |
| 1.3.6.1.4.1.868.2.5.3.1.2.1.1.2 | ColumntnEthInterfaceDuplex | read-write | current | When autonegotiation is disabled, this can be used to set the interface duplex. Refer the MAU-MIB is used for autonegotiation configuration. |
| 1.3.6.1.4.1.868.2.5.3.1.2.1.1.3 | ColumntnEthAutoCrossCap | read-only | current | This shows the capability of the Ethernet interface to do MDI/MDIX Autocross. |
| 1.3.6.1.4.1.868.2.5.3.1.2.1.1.4 | ColumntnEthAutoCrossMode | read-write | current | If this Ethernet interface supports MDI/MDIX Autocross, then the mode can be set in this mib variable. |
| 1.3.6.1.4.1.868.2.5.3.1.2.1.1.5 | ColumntnEthFarEndFaultCap | read-only | current | This shows the capability of the Ethernet interface to do Far End Fault Indication. |
| 1.3.6.1.4.1.868.2.5.3.1.2.1.1.6 | ColumntnEthFarEndFaultMode | read-write | current | If this Ethernet interface supports Far End Fault Indication, then it can be set in this mib variable. |
| 1.3.6.1.4.1.868.2.5.3.1.2.1.1.7 | ColumntnEthPhyModeChangeCap | read-only | current | This shows the capability of the Ethernet interface to support different PHY modes. |
| 1.3.6.1.4.1.868.2.5.3.1.2.1.1.8 | ColumntnEthPhyOperMode | read-only | current | This shows Ethernet PHY mode of this interface. |
| 1.3.6.1.4.1.868.2.5.3.1.2.1.1.9 | ColumntnEthPhyMode | read-write | current | This is used to set the Ethernet PHY mode of this interface if 'tnEthPhyModeChangeCap' is true. |
| 1.3.6.1.4.1.868.2.5.3.1.2.1.1.10 | ColumntnEthMaxFrameSize | read-write | current | The maximum frame size in bytes that is allowed on this ethernet interface. Not all devices can support write capability. |
| 1.3.6.1.4.1.868.2.5.3.1.2.2 | TabletnDMIInfoTable | not-accessible | current | This table has entries for interfaces which are capable of having Diagnostic monitoring capabilities. |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1 | RowtnDMIInfoEntry | not-accessible | current | A entry in the table represents diagnostic monitoring for an interface. |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.1 | ColumntnDMIConnectorType | read-only | current | The DMI connector type indicates the external optical or electrical cable connector provided as the interface. From SFF 8472 Rev 9.5 Value Description of conne… |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.2 | ColumntnDMIBitRate | read-only | current | Bitrate in units of 100Mbps. |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.3 | ColumntnDMILenFor9x125umKM | read-only | current | Specifies the link length that is supported by the transceiver while operating in single mode fiber. The value is in units of KM. |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.4 | ColumntnDMILenFor9x125um100M | read-only | current | Specifies the link length that is supported by the transceiver while operating in single mode fiber. The value is in units of 100m. |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.5 | ColumntnDMILenFor50x125um10M | read-only | current | Specifies the link length that is supported by the transceiver while operating in 50 micron multi mode fiber. The value is in units of 10m. |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.6 | ColumntnDMILenFor625x125um10M | read-only | current | Specifies the link length that is supported by the transceiver while operating in 62.5 micron multi mode fiber. The value is in units of 10m. |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.7 | ColumntnDMILenForCopper | read-only | current | Specifies the link length that is supported by the transceiver while operating in copper cable. The value is in units of meters. |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.8 | ColumntnDMIId | read-only | current | Specifies the physical device. The table below from SFF-8472 Rev 9.5 Standard gives description for the values. 00h Unknown or unspecified 01h GBIC 02h Module/… |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.9 | ColumntnDMILaserWavelength | read-only | current | The Nominal transmitter output wavelength at room temperature. The units in nm |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.10 | ColumntnDMITemperature | read-only | current | Temperature of fiber transceiver in tenths of degrees C. |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.11 | ColumntnDMITempAlarm | read-only | current | . |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.12 | ColumntnDMITxBiasCurrent | read-only | current | Transmit bias current on local fiber interface, in microamperes. |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.13 | ColumntnDMITxBiasAlarm | read-only | current | . |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.14 | ColumntnDMITxPowerLevel | read-only | current | DMI: Diagnostic Monitoring Interface for fiber transceivers. Transmit power on local fiber measured in microwatts. |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.15 | ColumntnDMITxPowerAlarm | read-only | current | . |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.16 | ColumntnDMIRxPowerLevel | read-only | current | DMI: Diagnostic Monitoring Interface for fiber transceivers. Receive power on local fiber measured in microwatts. |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.17 | ColumntnDMIRxPowerAlarm | read-only | current | . |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.18 | ColumntnDMIRxPwrLvlPreset | read-write | current | A preset level for Rx Power on the Fiber port, if the DMI read value falls below the preset value, an intrusion is detected, and a trap is generated. |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.19 | ColumntnDMIVendorName | read-only | current | The vendor name is a 16 character field that contains ASCII characters. The vendor name shall be the full name of the corporation, a commonly accepted abbrevia… |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.20 | ColumntnDMIVendorOUI | read-only | current | The vendor organizationally unique identifier field (vendor OUI) is a 3-byte field that contains the IEEE Company Identifier for the vendor. A value of all zer… |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.21 | ColumntnDMIVendorPartNo | read-only | current | The vendor part number is a 16-byte field that contains ASCII characters, defining the vendor part number or product name. A value of all zero in the 16-byte f… |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.22 | ColumntnDMIVendorRevision | read-only | current | The vendor revision number is a 4-byte field that contains ASCII characters, defining the vendor product revision number. A value of all zero in the 4-byte fie… |
| 1.3.6.1.4.1.868.2.5.3.1.2.2.1.23 | ColumntnDMIVendorSerialNo | read-only | current | The vendor serial number is a 16 character field that contains ASCII characters, defining the vendor’s serial number for the transceiver. A value of all zero… |
| 1.3.6.1.4.1.868.2.5.3.1.2.3 | TabletnIfBWAllocTable | not-accessible | current | This table has entries for bandwidth allocation for each interface. |
| 1.3.6.1.4.1.868.2.5.3.1.2.3.1 | RowtnIfBWAllocEntry | not-accessible | current | Each entry limits the bandwidth of an interface. |
| 1.3.6.1.4.1.868.2.5.3.1.2.3.1.1 | ColumntnIfBWAllocType | read-write | current | This mib variable allows the user to select what bytes in a frame is to be counted. countAllLayer1(1) - Counts all Layer 1 bytes. Preamble(8 bytes) + DA to CRC… |
| 1.3.6.1.4.1.868.2.5.3.1.2.3.1.2 | ColumntnIfIngressRateLimit | read-write | current | Ingress bandwidth limiting in bits per second, but not faster than port speed. This is the Committed Information rate (CIR) on this interface for Ingress. Traf… |
| 1.3.6.1.4.1.868.2.5.3.1.2.3.1.3 | ColumntnIfEgressRateLimit | read-write | current | Egress bandwidth limiting in bits per second, but not faster than port speed. Traffic which are over the rate are discarded. |
| 1.3.6.1.4.1.868.2.5.3.1.2.4 | TabletnIfRedundancyTable | not-accessible | current | This table has entries for interfaces which are capable of redundancy with another port. |
| 1.3.6.1.4.1.868.2.5.3.1.2.4.1 | RowtnIfRedundancyEntry | not-accessible | current | A entry in the table represents redundancy configuration. |
| 1.3.6.1.4.1.868.2.5.3.1.2.4.1.1 | ColumntnIfRedundancy | read-write | current | This feature is applicable in the devices that have 2 fiber ports and support redundancy on the ports. When set to enabled, the primary and backup fiber ports … |
| 1.3.6.1.4.1.868.2.5.3.1.2.4.1.2 | ColumntnIfRedundRevert | read-write | current | This mib variable is applicable only if 'tnIfRedundancy' is enabled. When there is a failure in the primary and secondary fiber takes over, this determines wha… |
| 1.3.6.1.4.1.868.2.5.3.1.2.4.1.3 | ColumntnIfPrimaryPort | read-write | current | The port's ifIndex which take part in the redundancy. |
| 1.3.6.1.4.1.868.2.5.3.1.2.4.1.4 | ColumntnIfSecondaryPort | read-write | current | The port's ifIndex which take part in the redundancy. |
| 1.3.6.1.4.1.868.2.5.3.1.2.4.1.5 | ColumntnIfRedundActivePort | read-write | current | This mib variable is applicable only if 'tnFiberRedundancy' is enabled. This indicates the current active port that is operational as the primary link. |
| 1.3.6.1.4.1.868.2.5.3.1.2.5 | TabletnIfFwdPortListTable | not-accessible | current | This table has entries each interface and corresponding list of ports that it can forward. |
| 1.3.6.1.4.1.868.2.5.3.1.2.5.1 | RowtnIfFwdPortListEntry | not-accessible | current | A entry in the table represents forwarding configuration of each interface. |
| 1.3.6.1.4.1.868.2.5.3.1.2.5.1.1 | ColumntnIfPortifIndextoPortNum | read-only | current | This maps the ifIndex to the Port physical number in this device. The 'tnIfFwdPortList' uses this port number for decoding the bitmap. |
| 1.3.6.1.4.1.868.2.5.3.1.2.5.1.2 | ColumntnIfFwdPortList | read-write | current | The complete set of ports, that frames ingressing this interface can be forwarded to. Each bit represents if it is in the forwarding list of this port or not a… |
| 1.3.6.1.4.1.868.2.5.3.1.2.7 | TabletnIfL2CPTable | not-accessible | current | This table has entries for interfaces to manage its L2CP processing. |
| 1.3.6.1.4.1.868.2.5.3.1.2.7.1 | RowtnIfL2CPEntry | not-accessible | current | A entry in the table represents the configuration of an interface's L2CP processing. |
| 1.3.6.1.4.1.868.2.5.3.1.2.7.1.1 | ColumntnIfL2CPSTPProtocolsFwd | read-write | current | Any STP/RSTP/MSTP protocol frames with destination address of 01-80-C2-00-00-00 is discarded at this port or passed. |
| 1.3.6.1.4.1.868.2.5.3.1.2.7.1.2 | ColumntnIfL2CPSlowProtocolsFwd | read-write | current | Any LACP/LAMP protocol frames with destination address of 01-80-C2-00-00-02 is discarded at this port or passed. Since this device pairs link OAM frames, these… |
| 1.3.6.1.4.1.868.2.5.3.1.2.7.1.3 | ColumntnIfL2CPPortAuthProtocolFwd | read-write | current | Port authentication protocol frames with destination address of 01-80-C2-00-00-03 is discarded at this port or passed. |
| 1.3.6.1.4.1.868.2.5.3.1.2.7.1.4 | ColumntnIfL2CPELMIProtocolFwd | read-write | current | E-LMI protocol frames with destination address of 01-80-C2-00-00-07 is discarded at this port or passed. |
| 1.3.6.1.4.1.868.2.5.3.1.2.7.1.5 | ColumntnIfL2CPLLDPProtocolFwd | read-write | current | LLDP protocol frames with destination address of 01-80-C2-00-00-0E and ethertype of 0x88CC which are not TN discovery LLDP frames are discarded at this port or… |
| 1.3.6.1.4.1.868.2.5.3.1.2.7.1.6 | ColumntnIfL2CPBridgeMgmtProtocolsFwd | read-write | current | Bridge Management protocol frames with destination address of 01-80-C2-00-00-10 is discarded at this port or passed. |
| 1.3.6.1.4.1.868.2.5.3.1.2.7.1.7 | ColumntnIfL2CPGARPBlockProtocolsFwd | read-write | current | GARP/MRP with destination address of 01-80-C2-00-00-20 to 01-80-C2-00-00-2F is discarded at this port or passed. |
| 1.3.6.1.4.1.868.2.5.3.1.2.7.1.8 | ColumntnIfL2CPBridgeBlkOtherMulticastsFwd | read-write | current | This mib variable passes or discards all the IEEE multicast frames in the bridge block of addresses [01-80-C2-00-00-04 to 01-80-C2-00-00-0F]. The mib variables… |
| 1.3.6.1.4.1.868.2.5.3.1.2.8 | TabletnIfTNDPTable | not-accessible | current | This table has entries for interfaces to manage TN Topology Discovery Protocol processing. |
| 1.3.6.1.4.1.868.2.5.3.1.2.8.1 | RowtnIfTNDPEntry | not-accessible | current | A entry in the table represents the configuration of an interface's TN Topology Discovery Protocol processing. |
| 1.3.6.1.4.1.868.2.5.3.1.2.8.1.1 | ColumntnIfTNDPTxState | read-write | current | If enabled, TN Topology Discovery Data will be sent out from this interface. If disabled, TN Topology Discovery Data will not be sent out from this interface. |
| 1.3.6.1.4.1.868.2.5.3.1.3 | NodetnInterfaceDiagMgmt | |||
| 1.3.6.1.4.1.868.2.5.3.1.3.1 | TabletnIfTDRTestTable | not-accessible | current | A table containing information about TDR (Time Domain Reflectometery) test on an interfaces. An entry appears in this table for each interface which is capable… |
| 1.3.6.1.4.1.868.2.5.3.1.3.1.1 | RowtnIfTDRTestEntry | not-accessible | current | Each entry represents the an interface capable of TDR test. |
| 1.3.6.1.4.1.868.2.5.3.1.3.1.1.1 | ColumntnIfTDRTestAction | read-write | current | Indicates the TDR test action to be executed on the interface and whether the test is currently running or not. 'perform' 'doNothing' have been completed. |
| 1.3.6.1.4.1.868.2.5.3.1.3.1.1.2 | ColumntnIfTDRTestStatus | read-only | current | Indicates the status of the last TDR test action set on the interface. |
| 1.3.6.1.4.1.868.2.5.3.1.3.1.1.3 | ColumntnIfTDRTestInitTime | read-only | current | Indicates the timestamp when TDR test is last run on the interface. If TDR test is never run on an interface, then this object value will be zero. |
| 1.3.6.1.4.1.868.2.5.3.1.3.1.1.4 | ColumntnIfTDRTestResultValid | read-only | current | Indicates whether the TDR test result on the interface is valid for the user to retrieve or not. |
| 1.3.6.1.4.1.868.2.5.3.1.3.2 | TabletnIfTDRResultTable | not-accessible | current | A table containing information about TDR test result on the device's interfaces. An entry appears in this table for each cable pair on an interface which has v… |
| 1.3.6.1.4.1.868.2.5.3.1.3.2.1 | RowtnIfTDRResultEntry | not-accessible | current | An entry in the tnIfTDRResultTable, containing the information about TDR test on an interface. |
| 1.3.6.1.4.1.868.2.5.3.1.3.2.1.1 | ColumntnIfTDRResultPairIndex | not-accessible | current | The local cable pair index. 'pair1to2' 'pair3to6' 'pair4to5' 'pair7to8' REFERENCE |
| 1.3.6.1.4.1.868.2.5.3.1.3.2.1.2 | ColumntnIfTDRResultPairLength | read-only | current | The length of the cable pair. A value of -1 indicates the length value is invalid. The unit of this value is indicated by tnIfTDRResultPairLengthUnit of the sa… |
| 1.3.6.1.4.1.868.2.5.3.1.3.2.1.3 | ColumntnIfTDRResultPairDistToFault | read-only | current | The distance to the fault point of the cable pair. A value of -1 indicates this value is invalid. The unit of this value is indicated by tnIfTDRResultPairLengt… |
| 1.3.6.1.4.1.868.2.5.3.1.3.2.1.4 | ColumntnIfTDRResultPairLengthUnit | read-only | current | |
| 1.3.6.1.4.1.868.2.5.3.1.3.2.1.5 | ColumntnIfTDRResultPairStatus | read-only | current | The status of the cable pair. 'unknown' 'normal' remote end. 'open' 'shorted' 'impedanceMismatch' mismatched. |
| 1.3.6.1.4.1.868.2.5.3.1.3.3 | TabletnIfLoopbackTable | not-accessible | current | A table containing information about loopback testing on interfaces. An entry appears in this table for each interface which is capable of loopback testing. |
| 1.3.6.1.4.1.868.2.5.3.1.3.3.1 | RowtnIfLoopbackEntry | not-accessible | current | Each entry represents the an interface capable of TDR test. |
| 1.3.6.1.4.1.868.2.5.3.1.3.3.1.1 | ColumntnIfLoopbackCapability | read-only | current | This gives the loopback capabilities for this interface. |
| 1.3.6.1.4.1.868.2.5.3.1.3.3.1.2 | ColumntnIfLoopbackInit | read-write | current | Loopback is used to diagnose any hardware or configuration problem on an interface. It can also be used to verify configurations such as bandwidth limiting. Th… |
| 1.3.6.1.4.1.868.2.5.3.1.3.3.1.3 | ColumntnIfLoopbackStatus | read-write | current | This gives the loopback status for this interface when enabled. The only two possible values for a SET operation are intiateLoopback(2) and terminateLoopback(3… |
| 1.3.6.1.4.1.868.2.5.3.1.3.3.1.4 | ColumntnIfClearCounters | read-write | current | This clears the counters maintained for this interface. This may be useful when doing loopback testing to verify the test frames sent and received counters. |
| 1.3.6.1.4.1.868.2.5.3.1.4 | NodetnIfMACSecurityMgmt | |||
| 1.3.6.1.4.1.868.2.5.3.1.4.3 | TabletnIfMACSecurityTable | not-accessible | current | A table containing port level security configuration. |
| 1.3.6.1.4.1.868.2.5.3.1.4.3.1 | RowtnIfMACSecurityEntry | not-accessible | current | Each entry represents each port's security settings. |
| 1.3.6.1.4.1.868.2.5.3.1.4.3.1.1 | ColumntnIfSourceAddrLock | read-write | current | The Source Address Lock when set to true(1) monitors for source MAC address change on this port. This feature is useful to detect if the device connected to th… |
| 1.3.6.1.4.1.868.2.5.3.1.4.3.1.2 | ColumntnIfSourceAddrLockAction | read-write | current | The 'tnIfSourceAddrLock' when set to true(1) monitors for source MAC address change on this port. This MIB variable sets the action to be taken when such an ev… |
| 1.3.6.1.4.1.868.2.5.3.1.4.3.1.3 | ColumntnIfFilterUnknownUnicast | read-write | current | This filters all unicast frames with unknown destination address from egressing this Port. |
| 1.3.6.1.4.1.868.2.5.3.1.4.3.1.4 | ColumntnIfFilterUnknownMulticast | read-write | current | This filters all multicast frames with unknown destination address from egressing this Port. |
| 1.3.6.1.4.1.868.2.5.3.1.4.4 | TabletnIfLimitDynMACLearningTable | not-accessible | current | A table containing configuration for interface level MAC Learning limits. It allows for limiting the number of users on a given port. A user is identified by a… |
| 1.3.6.1.4.1.868.2.5.3.1.4.4.1 | RowtnIfLimitDynMACLearningEntry | not-accessible | current | Each entry represents each interface's MAC limit settings. |
| 1.3.6.1.4.1.868.2.5.3.1.4.4.1.1 | ColumntnIfLimitDynMACMode | read-write | current | Mode Controls whether Limit Control is enabled on this port. Both this and the Global Mode must be set to Enabled for Limit Control to be in effect. |
| 1.3.6.1.4.1.868.2.5.3.1.4.4.1.2 | ColumntnIfLimitDynMACMaxCount | read-write | current | The maximum number of MAC addresses that can be secured on this port. This number cannot exceed 1024. If the limit is exceeded, the corresponding action is tak… |
| 1.3.6.1.4.1.868.2.5.3.1.4.4.1.3 | ColumntnIfLimitDynMACAction | read-write | current | If Limit is reached, the switch can take one of the following actions: none(0) : Do not allow more than Limit MAC addresses on the port, but take no further ac… |
| 1.3.6.1.4.1.868.2.5.3.1.4.4.1.4 | ColumntnIfLimitDynMACState | read-write | current | This column shows the current state of the port as seen from the Limit Control's point of view. The state takes one of four values: disabled(0) : Limit Control… |
| 1.3.6.1.4.1.868.2.5.3.1.4.4.1.5 | ColumntnIfLimitDynMACReopen | read-write | current | If a port is shutdown by this module, you may reopen it by setting this mib variable to enabled. |
| 1.3.6.1.4.1.868.2.5.3.1.5 | NodetnIfQOSMgmt | |||
| 1.3.6.1.4.1.868.2.5.3.1.5.1 | NodetnEgressQueueModeMgmt | |||
| 1.3.6.1.4.1.868.2.5.3.1.5.1.1 | TabletnEgressQueueModeTable | not-accessible | current | Table for Egress queuing method confiration by per port. |
| 1.3.6.1.4.1.868.2.5.3.1.5.1.1.1 | RowtnEgressQueueModeEntry | not-accessible | current | Entry for Egress queuing method confiration by per port |
| 1.3.6.1.4.1.868.2.5.3.1.5.1.1.1.1 | ColumntnEgressQueueIfIndex | not-accessible | current | The port interface of the TnEgressQueueModeEntry. |
| 1.3.6.1.4.1.868.2.5.3.1.5.1.1.1.2 | ColumntnEgressQueueMode | read-write | current | The queuing method for the egress prioQueue. wrr(1),strict(2) |
| 1.3.6.1.4.1.868.2.5.3.2 | NodetnMgmtConformance |