TN-NAS-MIB
80 objects
TBD
Imported Objects
| Q-BRIDGE-MIB | VlanId |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| TRANSITION-SMI | tnProducts |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.5.125 | IdentitytnNASMIB | TBD | ||
| 1.3.6.1.4.1.868.2.5.125.0 | NodetnNASMIBNotifications | |||
| 1.3.6.1.4.1.868.2.5.125.1 | NodetnNASMIBObjects | |||
| 1.3.6.1.4.1.868.2.5.125.1.1 | NodetnNASSysMgmt | |||
| 1.3.6.1.4.1.868.2.5.125.1.1.1 | ScalartnNASSysReAuthEnabled | read-write | current | If checked, successfully authenticated supplicants/clients are reauthenticated after the interval specified by the Reauthentication Period.Reauthentication for… |
| 1.3.6.1.4.1.868.2.5.125.1.1.2 | ScalartnNASSysReAuthPeriod | read-write | current | Determines the period, in seconds, after which a connected client must be reauthenticated. This is only active if the Reauthentication Enabled checkbox is chec… |
| 1.3.6.1.4.1.868.2.5.125.1.1.3 | ScalartnNASSysEAPOLTimeout | read-write | current | Determines the time for retransmission of Request Identity EAPOL frames. Valid values are in the range 1 to 65535 seconds. This has no effect for MAC-based por… |
| 1.3.6.1.4.1.868.2.5.125.1.1.4 | ScalartnNASSysAgingPeriod | read-write | current | This setting applies to the following modes, i.e. modes using the Port Security functionality to secure MAC addresses: Single 802.1X, Multi 802.1X, MAC-Based A… |
| 1.3.6.1.4.1.868.2.5.125.1.1.5 | ScalartnNASSysHoldTime | read-write | current | This setting applies to the following modes, i.e. modes using the Port Security functionality to secure MAC addresses: Single 802.1X, Multi 802.1X, MAC-Based A… |
| 1.3.6.1.4.1.868.2.5.125.1.1.6 | ScalartnNASSysRadiusAssignedQosEnable | read-write | current | RADIUS-assigned QoS provides a means to centrally control the traffic class to which traffic coming from a successfully authenticated supplicant is assigned on… |
| 1.3.6.1.4.1.868.2.5.125.1.1.7 | ScalartnNASSysRadiusAssignedVlanEnable | read-write | current | RADIUS-assigned VLAN provides a means to centrally control the VLAN on which a successfully authenticated supplicant is placed on the switch. Incoming traffic … |
| 1.3.6.1.4.1.868.2.5.125.1.1.8 | ScalartnNASSysGuestVlanEnable | read-write | current | A Guest VLAN is a special VLAN - typically with limited network access - on which 802.1X-unaware clients are placed after a network administrator-defined timeo… |
| 1.3.6.1.4.1.868.2.5.125.1.1.9 | ScalartnNASSysGuestVlanId | read-write | current | This is the value that a port's Port VLAN ID is set to if a port is moved into the Guest VLAN. It is only changeable if the Guest VLAN option is globally enabl… |
| 1.3.6.1.4.1.868.2.5.125.1.1.10 | ScalartnNASSysMaxReAuthCount | read-write | current | The number of times the switch transmits an EAPOL Request Identity frame without response before considering entering the Guest VLAN is adjusted with this sett… |
| 1.3.6.1.4.1.868.2.5.125.1.1.11 | ScalartnNASSysAllowGuestVlanIFEAPOLSeen | read-write | current | The switch remembers if an EAPOL frame has been received on the port for the life-time of the port. Once the switch considers whether to enter the Guest VLAN, … |
| 1.3.6.1.4.1.868.2.5.125.1.2 | NodetnNASPortMgmt | |||
| 1.3.6.1.4.1.868.2.5.125.1.2.1 | TabletnNASPortCfgTable | not-accessible | current | This table displays and sets port configuratio. |
| 1.3.6.1.4.1.868.2.5.125.1.2.1.1 | RowtnNASPortCfgEntry | not-accessible | current | This entry represents a port configuration. |
| 1.3.6.1.4.1.868.2.5.125.1.2.1.1.1 | ColumntnNASPortNum | not-accessible | current | The port number for which the configuration below applies. |
| 1.3.6.1.4.1.868.2.5.125.1.2.1.1.2 | ColumntnNASAdminState | read-write | current | If NAS is globally enabled, this selection controls the port's authentication mode. |
| 1.3.6.1.4.1.868.2.5.125.1.2.1.1.3 | ColumntnNASRadiusAssignedQosEnabled | read-write | current | When RADIUS-Assigned QoS is both globally enabled and enabled (checked) on a given port, the switch reacts to QoS Class information carried in the RADIUS Acces… |
| 1.3.6.1.4.1.868.2.5.125.1.2.1.1.4 | ColumntnNASRadiusAssignedVlanEnabled | read-write | current | When RADIUS-Assigned VLAN is both globally enabled and enabled (checked) for a given port, the switch reacts to VLAN ID information carried in the RADIUS Acces… |
| 1.3.6.1.4.1.868.2.5.125.1.2.1.1.5 | ColumntnNASGuestVlanEnabled | read-write | current | TWhen Guest VLAN is both globally enabled and enabled (checked) for a given port, the switch considers moving the port into the Guest VLAN according to the rul… |
| 1.3.6.1.4.1.868.2.5.125.1.2.1.1.6 | ColumntnNASPortCfgState | read-only | current | The current state of the port. |
| 1.3.6.1.4.1.868.2.5.125.1.3 | NodetnNASAuthCountMgmt | |||
| 1.3.6.1.4.1.868.2.5.125.1.3.1 | TabletnNASAuthCountTable | not-accessible | current | This table contains the configuration of auth counter. |
| 1.3.6.1.4.1.868.2.5.125.1.3.1.1 | RowtnNASAuthCountEntry | not-accessible | current | This entry represents an auth counter. |
| 1.3.6.1.4.1.868.2.5.125.1.3.1.1.1 | ColumntnNASAuthCount | read-only | current | NAS auththenticate count |
| 1.3.6.1.4.1.868.2.5.125.1.3.1.1.2 | ColumntnNASUnauthCount | read-only | current | NAS unauththenticate count |
| 1.3.6.1.4.1.868.2.5.125.1.4 | NodetnNASPortStatus | |||
| 1.3.6.1.4.1.868.2.5.125.1.4.1 | TabletnNASPortStatusTable | not-accessible | current | This table contains the configuration of port status. |
| 1.3.6.1.4.1.868.2.5.125.1.4.1.1 | RowtnNASPortStatusEntry | not-accessible | current | This entry represents a port status. |
| 1.3.6.1.4.1.868.2.5.125.1.4.1.1.1 | ColumntnNASPortAdminState | read-only | current | The port's current administrative state. |
| 1.3.6.1.4.1.868.2.5.125.1.4.1.1.2 | ColumntnNASPortState | read-only | current | The current state of the port. |
| 1.3.6.1.4.1.868.2.5.125.1.4.1.1.3 | ColumntnNASQosClass | read-only | current | The QoS class assigned by the RADIUS server. The field is blank if no QoS class is assigned. |
| 1.3.6.1.4.1.868.2.5.125.1.4.1.1.4 | ColumntnNASPortVlanId | read-only | current | The VLAN ID that NAS has put the port in. The field is blank, if the Port VLAN ID is not overridden by NAS. |
| 1.3.6.1.4.1.868.2.5.125.1.5 | NodetnNASClientStatus | |||
| 1.3.6.1.4.1.868.2.5.125.1.5.1 | TabletnNASClientStatusTable | not-accessible | current | This table contains the configuration of client status. |
| 1.3.6.1.4.1.868.2.5.125.1.5.1.1 | RowtnNASClientStatusEntry | not-accessible | current | This entry represents a client status. |
| 1.3.6.1.4.1.868.2.5.125.1.5.1.1.1 | ColumntnNASClientNum | not-accessible | current | 1 for last client/supplication; 2 for selected client/supplication. |
| 1.3.6.1.4.1.868.2.5.125.1.5.1.1.2 | ColumntnNASMacAddr | read-only | current | The MAC address of the last supplicant/client. |
| 1.3.6.1.4.1.868.2.5.125.1.5.1.1.3 | ColumntnNASVlanId | read-only | current | The VLAN ID on which the last frame from the last supplicant/client was received. |
| 1.3.6.1.4.1.868.2.5.125.1.5.1.1.4 | ColumntnNASIdentify | read-only | current | 802.1X-based: The user name (supplicant identity) carried in the most recently received Response Identity EAPOL frame. MAC-based: Not applicable. |
| 1.3.6.1.4.1.868.2.5.125.1.6 | NodetnNASSelectedBackendServerCounter | |||
| 1.3.6.1.4.1.868.2.5.125.1.6.1 | TabletnNASSelectedBackendServerCounterTable | not-accessible | current | This table contains the configuration of Selected backend server counter. |
| 1.3.6.1.4.1.868.2.5.125.1.6.1.1 | RowtnNASSelectedBackendServerCounterEntry | not-accessible | current | This entry represents an Selected backend server counter. |
| 1.3.6.1.4.1.868.2.5.125.1.6.1.1.1 | ColumntnNASRxAccessChallenges | read-only | current | 802.1X-based: Counts the number of times that the switch receives the first request from the backend server following the first response from the supplicant. I… |
| 1.3.6.1.4.1.868.2.5.125.1.6.1.1.2 | ColumntnNASRxOtherRequests | read-only | current | 802.1X-based: Counts the number of times that the switch sends an EAP Request packet following the first to the supplicant. Indicates that the backend server c… |
| 1.3.6.1.4.1.868.2.5.125.1.6.1.1.3 | ColumntnNASRxAuthSuccesses | read-only | current | 802.1X- and MAC-based: Counts the number of times that the switch receives a success indication. Indicates that the supplicant/client has successfully authenti… |
| 1.3.6.1.4.1.868.2.5.125.1.6.1.1.4 | ColumntnNASRxAuthFailures | read-only | current | 802.1X- and MAC-based: Counts the number of times that the switch receives a failure message. This indicates that the supplicant/client has not authenticated t… |
| 1.3.6.1.4.1.868.2.5.125.1.6.1.1.5 | ColumntnNASTxResponses | read-only | current | 802.1X-based: Counts the number of times that the switch attempts to send a supplicant's first response packet to the backend server. Indicates the switch atte… |
| 1.3.6.1.4.1.868.2.5.125.1.7 | NodetnNASSelectedEapolCounter | |||
| 1.3.6.1.4.1.868.2.5.125.1.7.1 | TabletnNASSelectedEapolCounterTable | not-accessible | current | This table contains the configuration of selected EAPOL counter. |
| 1.3.6.1.4.1.868.2.5.125.1.7.1.1 | RowtnNASSelectedEapolCounterEntry | not-accessible | current | This entry represents a selected EAPOL counter. |
| 1.3.6.1.4.1.868.2.5.125.1.7.1.1.1 | ColumntnNASRxTotal | read-only | current | The number of valid EAPOL frames of any type that have been received by the switch. |
| 1.3.6.1.4.1.868.2.5.125.1.7.1.1.2 | ColumntnNASRxResponseId | read-only | current | The number of valid EAPOL Response Identity frames that have been received by the switch. |
| 1.3.6.1.4.1.868.2.5.125.1.7.1.1.3 | ColumntnNASRxResponses | read-only | current | The number of valid EAPOL response frames (other than Response Identity frames) that have been received by the switch. |
| 1.3.6.1.4.1.868.2.5.125.1.7.1.1.4 | ColumntnNASRxStart | read-only | current | The number of EAPOL Start frames that have been received by the switch. |
| 1.3.6.1.4.1.868.2.5.125.1.7.1.1.5 | ColumntnNASRxLogoff | read-only | current | The number of valid EAPOL Logoff frames that have been received by the switch. |
| 1.3.6.1.4.1.868.2.5.125.1.7.1.1.6 | ColumntnNASRxInvalidType | read-only | current | The number of EAPOL frames that have been received by the switch in which the frame type is not recognized. |
| 1.3.6.1.4.1.868.2.5.125.1.7.1.1.7 | ColumntnNASRxInvalidLength | read-only | current | The number of EAPOL frames that have been received by the switch in which the Packet Body Length field is invalid. |
| 1.3.6.1.4.1.868.2.5.125.1.7.1.1.8 | ColumntnNASTxTotal | read-only | current | The number of EAPOL frames of any type that have been transmitted by the switch. |
| 1.3.6.1.4.1.868.2.5.125.1.7.1.1.9 | ColumntnNASTxRequestId | read-only | current | The number of EAPOL Request Identity frames that have been transmitted by the switch. |
| 1.3.6.1.4.1.868.2.5.125.1.7.1.1.10 | ColumntnNASTxRequests | read-only | current | The number of valid EAPOL Request frames (other than Request Identity frames) that have been transmitted by the switch. |
| 1.3.6.1.4.1.868.2.5.125.1.8 | NodetnNASAttachedClientStatus | |||
| 1.3.6.1.4.1.868.2.5.125.1.8.1 | TabletnNASAttachedClientStatusTable | not-accessible | current | This table contains the configuration of attached client status. |
| 1.3.6.1.4.1.868.2.5.125.1.8.1.1 | RowtnNASAttachedClientStatusEntry | not-accessible | current | This entry represents an attached client status. |
| 1.3.6.1.4.1.868.2.5.125.1.8.1.1.1 | ColumntnNASAttachedNum | not-accessible | current | The number of attached clients/supplications. |
| 1.3.6.1.4.1.868.2.5.125.1.8.1.1.2 | ColumntnNASAttachedIdentify | read-only | current | Shows the identity of the supplicant, as received in the Response Identity EAPOL frame. If no supplicants are attached, it shows No supplicants attached. This … |
| 1.3.6.1.4.1.868.2.5.125.1.8.1.1.3 | ColumntnNASMacAddress | read-only | current | For Multi 802.1X, this column holds the MAC address of the attached supplicant. For MAC-based Auth., this column holds the MAC address of the attached client. … |
| 1.3.6.1.4.1.868.2.5.125.1.8.1.1.4 | ColumntnNASAttachedVlanId | read-only | current | This column holds the VLAN ID that the corresponding client is currently secured through the Port Security module. |
| 1.3.6.1.4.1.868.2.5.125.1.8.1.1.5 | ColumntnNASState | read-only | current | The client can either be authenticated or unauthenticated. In the authenticated state, it is allowed to forward frames on the port, and in the unauthenticated … |
| 1.3.6.1.4.1.868.2.5.125.1.8.1.1.6 | ColumntnNASLastAuthentication | read-only | current | Shows the date and time of the last authentication of the client (successful as well as unsuccessful). |
| 1.3.6.1.4.1.868.2.5.125.1.8.1.1.7 | ColumntnNASSelected | read-write | current | select specific attached client. |
| 1.3.6.1.4.1.868.2.5.125.1.9 | NodetnNASClearCounter | |||
| 1.3.6.1.4.1.868.2.5.125.1.9.1 | TabletnNASClearCounterTable | not-accessible | current | This table contains the configuration of clearing counter. |
| 1.3.6.1.4.1.868.2.5.125.1.9.1.1 | RowtnNASClearCounterEntry | not-accessible | current | This entry represents a clear counter. |
| 1.3.6.1.4.1.868.2.5.125.1.9.1.1.1 | ColumntnNASClear | read-write | current | The action of clearing counter. |
| 1.3.6.1.4.1.868.2.5.125.2 | NodetnNASMIBConformance |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| TnNASAdminStateType | INTEGER { forceAuthorized (1), portBased802dot1x (2), forceUnauthorized (3), macBasedAuth (4), single802dot1x (5), multi802dot1x (6) } | current | Indicates the type of network access server admin state type. |