TN-PTP-MIB
96 objects
The mib provides functionalities for managing PTP.
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType MODULE-IDENTITY OBJECT-IDENTITY |
| SNMPv2-TC | RowStatus TruthValue |
| TRANSITION-SMI | tnProducts |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.5.123 | IdentitytnPtpMIB | The mib provides functionalities for managing PTP. | ||
| 1.3.6.1.4.1.868.2.5.123.1 | NodetnPtp | |||
| 1.3.6.1.4.1.868.2.5.123.1.1 | TabletnPtpClkModesTable | not-accessible | current | Table of SyncE External I/O |
| 1.3.6.1.4.1.868.2.5.123.1.1.1 | RowtnPtpClkModesEntry | not-accessible | current | An entry in the table,tnPtpClkModesTable |
| 1.3.6.1.4.1.868.2.5.123.1.1.1.1 | ColumntnPtpInState | read-write | current | IEEE 1588 Input State. |
| 1.3.6.1.4.1.868.2.5.123.1.1.1.2 | ColumntnPtpOutState | read-write | current | IEEE 1588 Output State. |
| 1.3.6.1.4.1.868.2.5.123.1.1.1.3 | ColumntnPtpInFreq | read-write | current | Clock frequency 1 PPS or 8k-25Mhz table of values. |
| 1.3.6.1.4.1.868.2.5.123.1.1.1.4 | ColumntnPtpOutFreq | read-write | current | The following values are possible: Editable value with the possible range of values are 1 - 25000000 (1 - 25MHz). |
| 1.3.6.1.4.1.868.2.5.123.1.1.1.5 | ColumntnPtpImpedance | read-write | current | Select the impedance termination of the input clock. The following values are possible: 1. 50 : 50 ohm impedance. 2. 75 : 75 ohm impedance. 3. Hi-Z : no impeda… |
| 1.3.6.1.4.1.868.2.5.123.1.1.1.6 | ColumntnPtpActualInFreq | read-only | current | The actual input frequency in Hz. |
| 1.3.6.1.4.1.868.2.5.123.1.1.1.7 | ColumntnPtpActualOutFreq | read-only | current | The actual output frequency in Hz. If output state is disabled set to 0 |
| 1.3.6.1.4.1.868.2.5.123.1.2 | TabletnPtpCreateClkConfTable | not-accessible | current | Table of PTP ClkInstance |
| 1.3.6.1.4.1.868.2.5.123.1.2.1 | RowtnPtpCreateClkConfEntry | not-accessible | current | An entry in the table,tnPtpCreateClkConfTable |
| 1.3.6.1.4.1.868.2.5.123.1.2.1.1 | ColumntnPtpCreateClkConfIndex | not-accessible | current | Index of ptp clocks. |
| 1.3.6.1.4.1.868.2.5.123.1.2.1.2 | ColumntnPtpDeviceType | read-create | current | Indicates the Type of the Clock Instance. There are five Device Types. 1. Ord-Bound - clock's Device Type is Ordinary-Boundary Clock. 2. P2p Transp - clock's D… |
| 1.3.6.1.4.1.868.2.5.123.1.2.1.3 | ColumntnPtpTwoStepFlag | read-create | current | Static member: defined by the system, true if two-step Sync events and Pdelay_Resp events are used. |
| 1.3.6.1.4.1.868.2.5.123.1.2.1.4 | ColumntnPtpClockId | read-create | current | A unique clock identifier. |
| 1.3.6.1.4.1.868.2.5.123.1.2.1.5 | ColumntnPtpOneWay | read-create | current | If true, one-way measurements are used. This parameter applies only to a slave. In one-way mode no delay measurements are performed, i.e. this is applicable on… |
| 1.3.6.1.4.1.868.2.5.123.1.2.1.6 | ColumntnPtpProtocol | read-create | current | Transport protocol used by the PTP protocol engine ethernet PTP over Ethernet multicast ip4multi PTP over IPv4 multicast ip4uni PTP over IPv4 unicast Note : IP… |
| 1.3.6.1.4.1.868.2.5.123.1.2.1.7 | ColumntnPtpVLANTag | read-create | current | Enables the VLAN tagging for the PTP frames. Note: Packets are only tagged if the port is configured for vlan tagging. i.e: Port Type != Unaware and PortVLAN m… |
| 1.3.6.1.4.1.868.2.5.123.1.2.1.8 | ColumntnPtpVID | read-create | current | VLAN Identifier used for tagging the PTP frames. |
| 1.3.6.1.4.1.868.2.5.123.1.2.1.9 | ColumntnPtpPCP | read-create | current | Priority Code Point value used for PTP frames. |
| 1.3.6.1.4.1.868.2.5.123.1.2.1.10 | ColumntnPtpClkConfRowStatus | read-create | current | The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.3.6.1.4.1.868.2.5.123.1.3 | TabletnPtpClkConf0Table | not-accessible | current | Table of PTP ClkInstance |
| 1.3.6.1.4.1.868.2.5.123.1.3.1 | RowtnPtpClkConf0Entry | not-accessible | current | An entry in the table,tnPtpClkConf0Table |
| 1.3.6.1.4.1.868.2.5.123.1.3.1.1 | ColumntnPtpClkConf0Index | read-only | current | Indicates the Instance of a particular Clock Instance [0..CLOCK_INST_MAX]. |
| 1.3.6.1.4.1.868.2.5.123.1.3.1.2 | ColumntnPtpDefaultDom | read-write | current | Clock domain [0..127]. |
| 1.3.6.1.4.1.868.2.5.123.1.3.1.3 | ColumntnPtpDefaultClockQuality | read-write | current | The clock quality is determined by the system, and holds 3 parts: Clock Class, Clock Accuracy and OffsetScaledLog Variance as defined in IEEE1588. The Clock Ac… |
| 1.3.6.1.4.1.868.2.5.123.1.3.1.4 | ColumntnPtpDefaultPri1 | read-write | current | Clock priority 1 [0..255] used by the BMC master select algorithm. |
| 1.3.6.1.4.1.868.2.5.123.1.3.1.5 | ColumntnPtpDefaultPri2 | read-write | current | Clock priority 2 [0..255] used by the BMC master select algorithm. |
| 1.3.6.1.4.1.868.2.5.123.1.3.1.6 | ColumntnPtpTime | read-only | current | Shows the actual PTP time with nanosecond resolution. |
| 1.3.6.1.4.1.868.2.5.123.1.3.1.7 | ColumntnPtpAdjustMethod | read-only | current | Shows the actual clock adjustment method. The method depends on the available hardware. |
| 1.3.6.1.4.1.868.2.5.123.1.3.1.8 | ColumntnPtpSynce | read-write | current | Activate to synchronize the System Clock to PTP Time. |
| 1.3.6.1.4.1.868.2.5.123.1.4 | TabletnPtpClkConfTable | not-accessible | current | Table of PTP ClkInstance |
| 1.3.6.1.4.1.868.2.5.123.1.4.1 | RowtnPtpClkConfEntry | not-accessible | current | An entry in the table,tnPtpClkConfTable |
| 1.3.6.1.4.1.868.2.5.123.1.4.1.1 | ColumntnPtpClkConfIndex | not-accessible | current | Indicates the Instance of a particular Clock Instance [0..CLOCK_INST_MAX]. |
| 1.3.6.1.4.1.868.2.5.123.1.4.1.2 | ColumntnPtpStpRm | read-only | current | Steps Removed : It is the number of PTP clocks traversed from the grandmaster to the local slave clock. |
| 1.3.6.1.4.1.868.2.5.123.1.4.1.3 | ColumntnPtpOffset | read-only | current | Time difference between the master clock and the local slave clock, measured in ns. |
| 1.3.6.1.4.1.868.2.5.123.1.4.1.4 | ColumntnPtpPathDelay | read-only | current | The mean propagation time for the link between the master and the local slave. |
| 1.3.6.1.4.1.868.2.5.123.1.4.1.5 | ColumntnPtpDelayFilter | read-write | current | The default delay filter is a low pass filter, with a time constant of 2**DelayFilter*DelayRequestRate. The value must be in the range of 1..6. |
| 1.3.6.1.4.1.868.2.5.123.1.4.1.6 | ColumntnPtpFilterPeriod | read-write | current | The default offset filter uses a minimum delay filter method i.e. The minimum measured offset during Period samples is used in the calculation. The value must … |
| 1.3.6.1.4.1.868.2.5.123.1.4.1.7 | ColumntnPtpFilterDist | read-write | current | The distance between two calculations is Dist periods. Note: In configurations with Timestamp enabled PHYs, the period is automatically increased, if (period*d… |
| 1.3.6.1.4.1.868.2.5.123.1.4.1.8 | ColumntnPtpParentPortId | read-only | current | Clock identity for the parent clock, if the local clock is not a slave, the value is the clocks own id. |
| 1.3.6.1.4.1.868.2.5.123.1.4.1.9 | ColumntnPtpParentPort | read-only | current | Port Id for the parent master port. |
| 1.3.6.1.4.1.868.2.5.123.1.4.1.10 | ColumntnPtpParentPStat | read-only | current | Parents Stats (always false). |
| 1.3.6.1.4.1.868.2.5.123.1.4.1.11 | ColumntnPtpParentVar | read-only | current | It is observed parent offset scaled log variance. |
| 1.3.6.1.4.1.868.2.5.123.1.4.1.12 | ColumntnPtpParentChgRate | read-only | current | Observed Parent Clock Phase Change Rate. i.e. the slave clocks rate offset compared to the master. (unit = ns per s). |
| 1.3.6.1.4.1.868.2.5.123.1.4.1.13 | ColumntnPtpParentGMId | read-only | current | Clock identity for the grand master clock, if the local clock is not a slave, the value is the clocks own id. |
| 1.3.6.1.4.1.868.2.5.123.1.4.1.14 | ColumntnPtpParentGMQual | read-only | current | The clock quality announced by the grand master. |
| 1.3.6.1.4.1.868.2.5.123.1.4.1.15 | ColumntnPtpParentPri1 | read-only | current | Clock priority 1 announced by the grand master. |
| 1.3.6.1.4.1.868.2.5.123.1.4.1.16 | ColumntnPtpParentPri2 | read-only | current | Clock priority 2 announced by the grand master. |
| 1.3.6.1.4.1.868.2.5.123.1.5 | TabletnPtpClkConf2Table | not-accessible | current | Table 2 of PTP ClkInstance |
| 1.3.6.1.4.1.868.2.5.123.1.5.1 | RowtnPtpClkConf2Entry | not-accessible | current | An entry in the table,tnPtpClkConf2Table |
| 1.3.6.1.4.1.868.2.5.123.1.5.1.1 | ColumntnPtpClkConfIndex2 | not-accessible | current | Indicates the Instance of a particular Clock Instance [0..CLOCK_INST_MAX]. |
| 1.3.6.1.4.1.868.2.5.123.1.5.1.2 | ColumntnPtpUtcOffset | read-write | current | Unicast Offset must be an integer value between 0 and 10000. |
| 1.3.6.1.4.1.868.2.5.123.1.5.1.3 | ColumntnPtpValid | read-write | current | Valid. |
| 1.3.6.1.4.1.868.2.5.123.1.5.1.4 | ColumntnPtpLeap59 | read-write | current | Leap 59. |
| 1.3.6.1.4.1.868.2.5.123.1.5.1.5 | ColumntnPtpLeap61 | read-write | current | Leap 61. |
| 1.3.6.1.4.1.868.2.5.123.1.5.1.6 | ColumntnPtpTimeTrac | read-write | current | Time Trac. |
| 1.3.6.1.4.1.868.2.5.123.1.5.1.7 | ColumntnPtpFreqTrac | read-write | current | Freq Trac. |
| 1.3.6.1.4.1.868.2.5.123.1.5.1.8 | ColumntnPtpTimeScale | read-write | current | Time Scale. |
| 1.3.6.1.4.1.868.2.5.123.1.5.1.9 | ColumntnPtpTimeSource | read-write | current | Time Source. Value of 0-255 |
| 1.3.6.1.4.1.868.2.5.123.1.5.1.10 | ColumntnPtpDisplay | read-write | current | If true then Offset From Master, MeanPathDelay and clockAdjustment are logged on the debug terminal. |
| 1.3.6.1.4.1.868.2.5.123.1.5.1.11 | ColumntnPtpPEnable | read-write | current | If true the P part of the algorithm is included. |
| 1.3.6.1.4.1.868.2.5.123.1.5.1.12 | ColumntnPtpIEnable | read-write | current | If true the I part of the algorithm is included. |
| 1.3.6.1.4.1.868.2.5.123.1.5.1.13 | ColumntnPtpDEnable | read-write | current | If true the D part of the algorithm is included. |
| 1.3.6.1.4.1.868.2.5.123.1.5.1.14 | ColumntnPtpPConstant | read-write | current | The default clock servo uses a PID regulator to calculate the current clock rate. i.e. clockAdjustment = OffsetFromMaster/ P constant + Integral(OffsetFromMast… |
| 1.3.6.1.4.1.868.2.5.123.1.5.1.15 | ColumntnPtpIConstant | read-write | current | The default clock servo uses a PID regulator to calculate the current clock rate. i.e. clockAdjustment = OffsetFromMaster/ P constant + Integral(OffsetFromMast… |
| 1.3.6.1.4.1.868.2.5.123.1.5.1.16 | ColumntnPtpDConstant | read-write | current | The default clock servo uses a PID regulator to calculate the current clock rate. i.e. clockAdjustment = OffsetFromMaster/ P constant + Integral(OffsetFromMast… |
| 1.3.6.1.4.1.868.2.5.123.1.5.1.17 | ColumntnPtpServoDelayFilter | read-write | current | The default delay filter is a low pass filter, with a time constant of 2**DelayFilter*DelayRequestRate. This is for the custom filter. |
| 1.3.6.1.4.1.868.2.5.123.1.6 | TabletnPtpUnicastSlaveTable | not-accessible | current | Table of PTP Unicast Slave |
| 1.3.6.1.4.1.868.2.5.123.1.6.1 | RowtnPtpUnicastSlaveEntry | not-accessible | current | An entry in the table,tnPtpUnicastSlaveTable |
| 1.3.6.1.4.1.868.2.5.123.1.6.1.1 | ColumntnPtpUnicastInstIndex | not-accessible | current | Indicates the Instance of a particular Clock Instance [0..3]. |
| 1.3.6.1.4.1.868.2.5.123.1.6.1.2 | ColumntnPtpUnicastSlaveIndex | not-accessible | current | Indicates the Instance of a particular Unicast Slave [0..4]. |
| 1.3.6.1.4.1.868.2.5.123.1.6.1.3 | ColumntnPtpUnicastDuration | read-write | current | The number of seconds a master is requested to send Announce/Sync messages. The request is repeated from the slave each Duration/4 seconds. [10..1000]. |
| 1.3.6.1.4.1.868.2.5.123.1.6.1.4 | ColumntnPtpIPAddress | read-write | current | IPv4 Address of the Master clock. |
| 1.3.6.1.4.1.868.2.5.123.1.6.1.5 | ColumntnPtpGrant | read-write | current | The granted repetition period for the sync message. |
| 1.3.6.1.4.1.868.2.5.123.1.6.1.6 | ColumntnPtpCommState | read-write | current | The state of the communication with the master, possible values are: IDLE : The entry is not in use. INIT : Announce is sent to the master (Waiting for a respo… |
| 1.3.6.1.4.1.868.2.5.123.1.7 | TabletnPtpPortConfTable | not-accessible | current | Table of PTP Clock Port Data Set Configuration |
| 1.3.6.1.4.1.868.2.5.123.1.7.1 | RowtnPtpPortConfEntry | not-accessible | current | An entry in the table,tnPtpPortConfTable |
| 1.3.6.1.4.1.868.2.5.123.1.7.1.1 | ColumntnPtpPortConfInstIndex | not-accessible | current | Indicates the Instance of a particular Clock Instance [0..3]. |
| 1.3.6.1.4.1.868.2.5.123.1.7.1.2 | ColumntnPtpPortConfIndex | not-accessible | current | Static member port Identity : Port number [1..max port no]. |
| 1.3.6.1.4.1.868.2.5.123.1.7.1.3 | ColumntnPtpStat | not-accessible | current | Dynamic member portState: Current state of the port. |
| 1.3.6.1.4.1.868.2.5.123.1.7.1.4 | ColumntnPtpMDR | not-accessible | current | Dynamic member log Min Delay Req Interval: The delay request interval announced by the master. |
| 1.3.6.1.4.1.868.2.5.123.1.7.1.5 | ColumntnPtpMeanPath | not-accessible | current | The path delay measured by the port in P2P mode. In E2E mode this value is 0. |
| 1.3.6.1.4.1.868.2.5.123.1.7.1.6 | ColumntnPtpAnv | read-create | current | The interval for issuing announce messages in master state. [-3..4] |
| 1.3.6.1.4.1.868.2.5.123.1.7.1.7 | ColumntnPtpATO | read-create | current | The timeout for receiving announce messages on the port. [-1..10] |
| 1.3.6.1.4.1.868.2.5.123.1.7.1.8 | ColumntnPtpSyv | read-create | current | The interval for issuing sync messages in master. [-7..4] |
| 1.3.6.1.4.1.868.2.5.123.1.7.1.9 | ColumntnPtpSyncIntErr | not-accessible | current | Synce Interval Error truth value |
| 1.3.6.1.4.1.868.2.5.123.1.7.1.10 | ColumntnPtpDim | read-create | current | Configurable member delayMechanism: The delay mechanism used for the port: e2e End to end delay measurement p2p Peer to peer delay measurement. Can be defined … |
| 1.3.6.1.4.1.868.2.5.123.1.7.1.11 | ColumntnPtpMPR | read-create | current | The interval for issuing Delay_Req messages for the port in E2e mode. This value is announced from the master to the slave in an announce message. The value is… |
| 1.3.6.1.4.1.868.2.5.123.1.7.1.12 | ColumntnPtpDelayAsym | read-create | current | If the transmission delay for a link in not symmetric, the asymmetry can be configured here, see IEEE 1588 Section 7.4.2 Communication path asymmetry. [-100000… |
| 1.3.6.1.4.1.868.2.5.123.1.7.1.13 | ColumntnPtpIngerssLat | read-create | current | Ingress latency measured in ns, as defined in IEEE 1588 Section 7.3.4.2. [-100000..100000] |
| 1.3.6.1.4.1.868.2.5.123.1.7.1.14 | ColumntnPtpEgressLat | read-create | current | Egress latency measured in ns, as defined in IEEE 1588 Section 7.3.4.2. [-100000..100000] |
| 1.3.6.1.4.1.868.2.5.123.1.7.1.15 | ColumntnPtpVersion | not-accessible | current | The current implementation only supports PTP version 2. |
| 1.3.6.1.4.1.868.2.5.123.1.7.1.16 | ColumntnPtpPortConfRowStatus | read-create | current | The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated. |