TN-QOS-EXT-MIB
195 objects
The mib module for managing extra QoS features in TN platform products.
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| Q-BRIDGE-MIB | PortList VlanIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION TimeInterval TruthValue |
| TRANSITION-SMI | tnProducts |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.5.9 | IdentitytnQosExtMIB | The mib module for managing extra QoS features in TN platform products. | ||
| 1.3.6.1.4.1.868.2.5.9.1 | NodetnQosExtMIBObjects | |||
| 1.3.6.1.4.1.868.2.5.9.1.1 | NodetnQosExtPortMgmt | |||
| 1.3.6.1.4.1.868.2.5.9.1.1.1 | TabletnQosExtPortPolicerTable | not-accessible | current | A port policer table can limit the bandwidth of received frames per port. |
| 1.3.6.1.4.1.868.2.5.9.1.1.1.1 | RowtnQosExtPortPolicerEntry | not-accessible | current | An entry in the table controls the bandwidth of received frames per port. It is located in front of the ingress queue. |
| 1.3.6.1.4.1.868.2.5.9.1.1.1.1.1 | ColumntnQosExtPortPolicerStatus | read-write | current | Controls the per port policer status. The policer can limit the bandwidth of received frames. It is located in front of the Ingress queue. |
| 1.3.6.1.4.1.868.2.5.9.1.1.1.1.2 | ColumntnQosExtPortPolicerRate | read-write | current | Controls the rate for the port policer. The rate unit is defined in tnQosExtPortPolicerUnit. |
| 1.3.6.1.4.1.868.2.5.9.1.1.1.1.3 | ColumntnQosExtPortPolicerUnit | read-write | current | the rate unit for the port policer. Depend on the implement, some unit type may not be supported. |
| 1.3.6.1.4.1.868.2.5.9.1.1.1.1.4 | ColumntnQosExtPortPolicerFlowControl | read-write | current | Controls the port policer flow control. If policer flow control is enabled and the port is in flow control mode, then pause frames are sent instead of discardi… |
| 1.3.6.1.4.1.868.2.5.9.1.1.2 | TabletnQosExtPortQueuePolicerTable | not-accessible | current | A port queue policer table can limit the bandwidth of received frames per port per queue. |
| 1.3.6.1.4.1.868.2.5.9.1.1.2.1 | RowtnQosExtPortQueuePolicerEntry | not-accessible | current | An entry in the table controls the bandwidth of received frames per port per queue. It is located in front of the ingress queue. |
| 1.3.6.1.4.1.868.2.5.9.1.1.2.1.1 | ColumntnQosExtPortQueuePolicerQid | not-accessible | current | The ingress queue id for queue policer. tnQosExtPortQueuePolicerQid is a number in the range (0..(dot1dPortNumTrafficClasses-1)) |
| 1.3.6.1.4.1.868.2.5.9.1.1.2.1.2 | ColumntnQosExtPortQueuePolicerStatus | read-write | current | Controls whether the policer is enabled on the specific queue. |
| 1.3.6.1.4.1.868.2.5.9.1.1.2.1.3 | ColumntnQosExtPortQueuePolicerRate | read-write | current | Controls the rate for the queue policer. The rate unit is defined in tnQosExtPortQueuePolicerUnit. |
| 1.3.6.1.4.1.868.2.5.9.1.1.2.1.4 | ColumntnQosExtPortQueuePolicerUnit | read-write | current | The rate unit for the queue policer. Depend on the implement, some unit type may not be supported. |
| 1.3.6.1.4.1.868.2.5.9.1.1.3 | TabletnQosExtPortSchedulerTable | not-accessible | current | A port scheduler table controls the egress queue scheduler method per port. |
| 1.3.6.1.4.1.868.2.5.9.1.1.3.1 | RowtnQosExtPortSchedulerEntry | not-accessible | current | An entry in the table controls the egress queue scheduler method per port. |
| 1.3.6.1.4.1.868.2.5.9.1.1.3.1.1 | ColumntnQosExtPortSchedulerMode | read-write | current | Controls the port egress scheduler mode, strict or weighted. |
| 1.3.6.1.4.1.868.2.5.9.1.1.3.1.2 | ColumntnQosExtPortSchedulerQueueMask | read-write | current | Controls the queues mask which is in the weighted schedule mode. Other queues are in strict mode. |
| 1.3.6.1.4.1.868.2.5.9.1.1.4 | TabletnQosExtPortSchedulerWeightTable | not-accessible | current | A port scheduler weight table controls the egress queue weight value in weighted scheduler mode per port. |
| 1.3.6.1.4.1.868.2.5.9.1.1.4.1 | RowtnQosExtPortSchedulerWeightEntry | not-accessible | current | An entry in the table controls the egress queue weight value in weighted scheduler mode per port. |
| 1.3.6.1.4.1.868.2.5.9.1.1.4.1.1 | ColumntnQosExtPortSchedulerWeightQid | not-accessible | current | The egress queue id for scheduler. tnQosExtPortSchedulerWeightQid is a number in the range (0..(dot1dPortNumTrafficClasses-1)) |
| 1.3.6.1.4.1.868.2.5.9.1.1.4.1.2 | ColumntnQosExtPortSchedulerWeightVal | read-write | current | The egress queue weight value. the value range is from 1 to 100. |
| 1.3.6.1.4.1.868.2.5.9.1.1.4.1.3 | ColumntnQosExtPortSchedulerWeightPercent | read-only | current | The egress queue weight in percent view. |
| 1.3.6.1.4.1.868.2.5.9.1.1.5 | TabletnQosExtPortShaperTable | not-accessible | current | A port shaper table can limit the bandwidth of egress frames per port. |
| 1.3.6.1.4.1.868.2.5.9.1.1.5.1 | RowtnQosExtPortShaperEntry | not-accessible | current | An entry in the table controls the bandwidth of egress frames per port. |
| 1.3.6.1.4.1.868.2.5.9.1.1.5.1.1 | ColumntnQosExtPortShaperStatus | read-write | current | Controls the per port shaper status. The shaper can limit the bandwidth of transmit frames in egress side. |
| 1.3.6.1.4.1.868.2.5.9.1.1.5.1.2 | ColumntnQosExtPortShaperRate | read-write | current | Controls the rate for the port shaper. The rate unit is defined in tnQosExtPortShaperUnit. |
| 1.3.6.1.4.1.868.2.5.9.1.1.5.1.3 | ColumntnQosExtPortShaperUnit | read-write | current | the rate unit for the port shaper. Depend on the implement, some unit type may not be supported. |
| 1.3.6.1.4.1.868.2.5.9.1.1.6 | TabletnQosExtPortQueueShaperTable | not-accessible | current | A port queue shaper table can limit the bandwidth of egress frames per port per queue. |
| 1.3.6.1.4.1.868.2.5.9.1.1.6.1 | RowtnQosExtPortQueueShaperEntry | not-accessible | current | An entry in the table controls the bandwidth of egress frames per port per queue. |
| 1.3.6.1.4.1.868.2.5.9.1.1.6.1.1 | ColumntnQosExtPortQueueShaperQid | not-accessible | current | The egress queue id for queue shaper. tnQosExtPortQueueShaperQid is a number in the range (0..(dot1dPortNumTrafficClasses-1)) |
| 1.3.6.1.4.1.868.2.5.9.1.1.6.1.2 | ColumntnQosExtPortQueueShaperStatus | read-write | current | Controls whether the shaper is enabled on the specific queue. |
| 1.3.6.1.4.1.868.2.5.9.1.1.6.1.3 | ColumntnQosExtPortQueueShaperRate | read-write | current | Controls the rate for the queue shaper. The rate unit is defined in tnQosExtPortQueueShaperUnit. |
| 1.3.6.1.4.1.868.2.5.9.1.1.6.1.4 | ColumntnQosExtPortQueueShaperUnit | read-write | current | The rate unit for the queue shaper. Depend on the implement, some unit type may not be supported. |
| 1.3.6.1.4.1.868.2.5.9.1.1.6.1.5 | ColumntnQosExtPortQueueShaperExcess | read-write | current | Controls whether the queue is allowed to use excess bandwidth. |
| 1.3.6.1.4.1.868.2.5.9.1.1.7 | TabletnQosExtPortStormControlTable | not-accessible | current | Storm control settings table. |
| 1.3.6.1.4.1.868.2.5.9.1.1.7.1 | RowtnQosExtPortStormControlEntry | not-accessible | current | An entry in the table represents the storm control settings on an interface. |
| 1.3.6.1.4.1.868.2.5.9.1.1.7.1.1 | ColumntnQosExtPortStormControlUnicastStatus | read-write | current | Enable or disable the storm control status for unicast. |
| 1.3.6.1.4.1.868.2.5.9.1.1.7.1.2 | ColumntnQosExtPortStormControlUnicastRate | read-write | current | The rate unit is packets per second (pps). |
| 1.3.6.1.4.1.868.2.5.9.1.1.7.1.3 | ColumntnQosExtPortStormControlMulticastStatus | read-write | current | Enable or disable the storm control status for multicast. |
| 1.3.6.1.4.1.868.2.5.9.1.1.7.1.4 | ColumntnQosExtPortStormControlMulticastRate | read-write | current | The rate unit is packets per second (pps). |
| 1.3.6.1.4.1.868.2.5.9.1.1.7.1.5 | ColumntnQosExtPortStormControlBroadcastStatus | read-write | current | Enable or disable the storm control status for broadcast. |
| 1.3.6.1.4.1.868.2.5.9.1.1.7.1.6 | ColumntnQosExtPortStormControlBroadcastRate | read-write | current | The rate unit is packets per second (pps). |
| 1.3.6.1.4.1.868.2.5.9.1.1.8 | TabletnQosExtPortStormControl2Table | not-accessible | current | Storm control settings table 2. |
| 1.3.6.1.4.1.868.2.5.9.1.1.8.1 | RowtnQosExtPortStormControl2Entry | not-accessible | current | An entry in the table represents the storm control settings on an interface. |
| 1.3.6.1.4.1.868.2.5.9.1.1.8.1.1 | ColumntnQosExtPortStormControl2FrameType | not-accessible | current | The frame type that storm control takes effect. Implement may use values like: unicast - unicast frame broadcast - broadcast frame unknown - unknown(flooding) … |
| 1.3.6.1.4.1.868.2.5.9.1.1.8.1.2 | ColumntnQosExtPortStormControl2Rate | read-write | current | Controls the rate for the storm control. The rate unit is defined in tnQosExtPortStormControl2RateUnit |
| 1.3.6.1.4.1.868.2.5.9.1.1.8.1.3 | ColumntnQosExtPortStormControl2RateUnit | read-write | current | Controls the rate unit for the storm control. The rate is defined in tnQosExtPortStormControl2Rate |
| 1.3.6.1.4.1.868.2.5.9.1.1.8.1.4 | ColumntnQosExtPortStormControl2Status | read-write | current | Enable or disable the storm control status for the certain frame type. |
| 1.3.6.1.4.1.868.2.5.9.1.1.9 | TabletnQosExtPortWredTable | not-accessible | current | A table used to configure the Weighted Random Early Detection feature. |
| 1.3.6.1.4.1.868.2.5.9.1.1.9.1 | RowtnQosExtPortWredEntry | not-accessible | current | An entry in the table used to configure the Weighted Random Early Detection feature. |
| 1.3.6.1.4.1.868.2.5.9.1.1.9.1.1 | ColumntnQosExtPortWredQid | not-accessible | current | The queue id for the weighted random early detection. |
| 1.3.6.1.4.1.868.2.5.9.1.1.9.1.2 | ColumntnQosExtPortWredEnable | read-write | current | Enable or disable the weighted random early detection for a certain traffic queue. |
| 1.3.6.1.4.1.868.2.5.9.1.1.9.1.3 | ColumntnQosExtPortWredThresholdMin | read-write | current | Controls the lower RED threshold for a certain traffic queue. If the average queue filling level is below this threshold, the drop probability is zero. This va… |
| 1.3.6.1.4.1.868.2.5.9.1.1.9.1.4 | ColumntnQosExtPortWredMaxDp1 | read-write | current | Controls the drop probability for frames marked with Drop Precedence Level 1 when the average queue filling level is 100%. This value is restricted to 0-100. |
| 1.3.6.1.4.1.868.2.5.9.1.1.9.1.5 | ColumntnQosExtPortWredMaxDp2 | read-write | current | Controls the drop probability for frames marked with Drop Precedence Level 2 when the average queue filling level is 100%. This value is restricted to 0-100. |
| 1.3.6.1.4.1.868.2.5.9.1.1.9.1.6 | ColumntnQosExtPortWredMaxDp3 | read-write | current | Controls the drop probability for frames marked with Drop Precedence Level 3 when the average queue filling level is 100%. This value is restricted to 0-100. |
| 1.3.6.1.4.1.868.2.5.9.1.1.9.1.7 | ColumntnQosExtPortWredMaxThresh | read-write | current | Controls the upper RED drop probability or fill level threshold for frames marked with Drop Precedence Level 1 (yellow frames). This value is restricted to 1-1… |
| 1.3.6.1.4.1.868.2.5.9.1.1.9.1.8 | ColumntnQosExtPortWredMaxUnit | read-write | current | Selects the unit for Max. Threshold. Possible values are: Drop Probability: Max. Threshold controls the drop probability just below 100% fill level. Fill Level… |
| 1.3.6.1.4.1.868.2.5.9.1.1.10 | TabletnQosExtPortPolicerOrderTable | not-accessible | current | A table used to configure the QoS Policer Order per port. |
| 1.3.6.1.4.1.868.2.5.9.1.1.10.1 | RowtnQosExtPortPolicerOrderEntry | not-accessible | current | An entry in the table used to configure the QoS Policer Order per port. |
| 1.3.6.1.4.1.868.2.5.9.1.1.10.1.1 | ColumntnQosExtPortPolicerOrder | read-write | current | QoS policer order on the entry. depend on implement, the valid policer order would be: 1 - in this mode, QoS policer order is Port Queue Policer first, then Po… |
| 1.3.6.1.4.1.868.2.5.9.1.2 | NodetnQosExtL2CosMgmt | |||
| 1.3.6.1.4.1.868.2.5.9.1.2.1 | TabletnQosExtL2CosIfClassifDefaultTable | not-accessible | current | Qos layer 2 default Ingress Classification table. |
| 1.3.6.1.4.1.868.2.5.9.1.2.1.1 | RowtnQosExtL2CosIfClassifDefaultEntry | not-accessible | current | An entry in the table represents the QoS layer 2 default Ingress Classification settings on an interface. |
| 1.3.6.1.4.1.868.2.5.9.1.2.1.1.1 | ColumntnQosExtL2CosIfClassifDefaultClass | read-write | current | Controls the default QoS class (the QoS class for frames not classified in any other way). There is a one to one mapping between QoS class, queue and priority.… |
| 1.3.6.1.4.1.868.2.5.9.1.2.1.1.2 | ColumntnQosExtL2CosIfClassifDefaultDpl | read-write | current | Controls the default DP (Drop Precedence) level for frames not classified in any other way. |
| 1.3.6.1.4.1.868.2.5.9.1.2.1.1.3 | ColumntnQosExtL2CosIfClassifDefaultPcp | read-write | current | Controls the default PCP for untagged frames. PCP (Priority Code Point) is a 3-bit field storing the priority level for the 802.1Q frame. It is also known as U… |
| 1.3.6.1.4.1.868.2.5.9.1.2.1.1.4 | ColumntnQosExtL2CosIfClassifDefaultDei | read-write | current | Controls the default DEI for untagged frames. DEI (Drop Eligible Indicator) is a 1-bit field in the VLAN tag. |
| 1.3.6.1.4.1.868.2.5.9.1.2.2 | TabletnQosExtL2CosIfClassifTagTable | not-accessible | current | Layer 2 Cos ingress priority-tagged frame classification mode Table. |
| 1.3.6.1.4.1.868.2.5.9.1.2.2.1 | RowtnQosExtL2CosIfClassifTagEntry | not-accessible | current | An entry in the table represents the Layer 2 Cos ingress priority-tagged frame classification mode on an interface. |
| 1.3.6.1.4.1.868.2.5.9.1.2.2.1.1 | ColumntnQosExtL2CosIfClassifTagMode | read-write | current | Controls the classification mode for priority tagged frames on this interface. Disabled - Use default QoS class and DP level for priority tagged frames. Enable… |
| 1.3.6.1.4.1.868.2.5.9.1.2.3 | TabletnQosExtL2CosIfClassifTagMapTable | not-accessible | current | classified (PCP, DEI) to (QoS class, DP level) mapping table. |
| 1.3.6.1.4.1.868.2.5.9.1.2.3.1 | RowtnQosExtL2CosIfClassifTagMapEntry | not-accessible | current | An entry in the table represents the mapping of the classified (PCP, DEI) to (QoS class, DP level) values. This mapping is valid when tnQosExtL2CosIfClassifTag… |
| 1.3.6.1.4.1.868.2.5.9.1.2.3.1.1 | ColumntnQosExtL2CosIfClassifTagMapPcp | not-accessible | current | The carried Pcp (Priority Code Point) field value if recieved frame is IEEE tagged frame. |
| 1.3.6.1.4.1.868.2.5.9.1.2.3.1.2 | ColumntnQosExtL2CosIfClassifTagMapDei | not-accessible | current | The carried Dei (Drop Eligible Indicator) field value if recieved frame is IEEE tagged frame. |
| 1.3.6.1.4.1.868.2.5.9.1.2.3.1.3 | ColumntnQosExtL2CosIfClassifTagMapClass | read-write | current | The Traffic Class the received frame is mapped to. tnQosExtL2CosIfClassifTagMapClass is a number in the range (0..(dot1dPortNumTrafficClasses-1)). |
| 1.3.6.1.4.1.868.2.5.9.1.2.3.1.4 | ColumntnQosExtL2CosIfClassifTagMapDpl | read-write | current | The DP (Drop Precedence) level the received frame is mapped to. |
| 1.3.6.1.4.1.868.2.5.9.1.2.4 | TabletnQosExtL2CosIfTagRemarkingModeTable | not-accessible | current | A table can control the egress frame tag remarking mode on an interface. |
| 1.3.6.1.4.1.868.2.5.9.1.2.4.1 | RowtnQosExtL2CosIfTagRemarkingModeEntry | not-accessible | current | An entry in the table controls the egress frame tag remarking mode on an interface. |
| 1.3.6.1.4.1.868.2.5.9.1.2.4.1.1 | ColumntnQosExtL2CosIfTagRemarkingMode | read-write | current | Controls the tag remarking mode for this port. Classified - Use classified PCP/DEI values. Default - Use default PCP/DEI values. Mapped - Use mapped versions o… |
| 1.3.6.1.4.1.868.2.5.9.1.2.5 | TabletnQosExtL2CosIfTagRemarkingDefaultTable | not-accessible | current | A table represents the egress frame tag remarking mapping per port, when tnQosExtL2CosIfTagRemarkingMode is set to default mode. |
| 1.3.6.1.4.1.868.2.5.9.1.2.5.1 | RowtnQosExtL2CosIfTagRemarkingDefaultEntry | not-accessible | current | An entry in the table represents the egress frame tag remarking mapping per port, when tnQosExtL2CosIfTagRemarkingMode is set to default mode. |
| 1.3.6.1.4.1.868.2.5.9.1.2.5.1.1 | ColumntnQosExtL2CosIfTagRemarkingDefaultPcp | read-write | current | Default PCP (Priority Code Point) is a 3-bit field storing the priority level for the 802.1Q frame. It is also known as User Priority. The valid range is 0 - 7… |
| 1.3.6.1.4.1.868.2.5.9.1.2.5.1.2 | ColumntnQosExtL2CosIfTagRemarkingDefaultDei | read-write | current | Default DEI (Drop Eligible Indicator) is a 1-bit field in the VLAN tag. The valid range is 0 - 1. The default is 0. |
| 1.3.6.1.4.1.868.2.5.9.1.2.6 | TabletnQosExtL2CosIfTagRemarkingMappingTable | not-accessible | current | A table represents the egress frame tag remarking mapping per port, when tnQosExtL2CosIfTagRemarkingMode is set to mapping mode. |
| 1.3.6.1.4.1.868.2.5.9.1.2.6.1 | RowtnQosExtL2CosIfTagRemarkingMappingEntry | not-accessible | current | An entry in the table represents the egress frame tag remarking mapping per port, when tnQosExtL2CosIfTagRemarkingMode is set to mapping mode. |
| 1.3.6.1.4.1.868.2.5.9.1.2.6.1.1 | ColumntnQosExtL2CosIfTagRemarkingClass | not-accessible | current | The traffic class of the transmit frame belongs to. tnQosExtIfTagRemarkingClass is a number in the range (0..(dot1dPortNumTrafficClasses-1)). |
| 1.3.6.1.4.1.868.2.5.9.1.2.6.1.2 | ColumntnQosExtL2CosIfTagRemarkingDpl | not-accessible | current | The DP (Drop Precedence) level of the transmit frame belongs to. |
| 1.3.6.1.4.1.868.2.5.9.1.2.6.1.3 | ColumntnQosExtL2CosIfTagRemarkingPcp | read-write | current | PCP (Priority Code Point) is a 3-bit field storing the priority level for the 802.1Q frame. It is also known as User Priority. The valid range is 0 - 7. |
| 1.3.6.1.4.1.868.2.5.9.1.2.6.1.4 | ColumntnQosExtL2CosIfTagRemarkingDei | read-write | current | DEI (Drop Eligible Indicator) is a 1-bit field in the VLAN tag. The valid range is 0 - 1. |
| 1.3.6.1.4.1.868.2.5.9.1.2.7 | TabletnQosExtL2CosIfTagRemarkingDplMappingTable | not-accessible | current | A table represents the egress frame tag remarking DP level mapping per port, when tnQosExtL2CosIfTagRemarkingMode is set to mapping mode. |
| 1.3.6.1.4.1.868.2.5.9.1.2.7.1 | RowtnQosExtL2CosIfTagRemarkingDplMappingEntry | not-accessible | current | An entry in the table represents the egress frame tag remarking dpl mapping per port, when tnQosExtL2CosIfTagRemarkingMode is set to mapping mode. |
| 1.3.6.1.4.1.868.2.5.9.1.2.7.1.1 | ColumntnQosExtL2CosIfTagRemarkingDplMappingClassifDpl | not-accessible | current | The Classified DP (Drop Precedence) level of the transmit frame belongs to. |
| 1.3.6.1.4.1.868.2.5.9.1.2.7.1.2 | ColumntnQosExtL2CosIfTagRemarkingDplMappingDpl | read-write | current | The DP (Drop Precedence) level used for tag remarking process. |
| 1.3.6.1.4.1.868.2.5.9.1.3 | NodetnQosExtDscpMgmt | |||
| 1.3.6.1.4.1.868.2.5.9.1.3.1 | TabletnQosExtDscpIfClassifBaseTable | not-accessible | current | A table represents the QoS classification mode basis on an interface. |
| 1.3.6.1.4.1.868.2.5.9.1.3.1.1 | RowtnQosExtDscpIfClassifBaseEntry | not-accessible | current | An entry in the table represents the QoS classification mode basis on an interface. |
| 1.3.6.1.4.1.868.2.5.9.1.3.1.1.1 | ColumntnQosExtDscpIfClassifBaseDscp | read-write | current | Controls whether the QoS classification mode is based on DSCP value in IP frames on an interface. Disabled - Disable DSCP based classification. Enabled - Enabl… |
| 1.3.6.1.4.1.868.2.5.9.1.3.2 | TabletnQosExtDscpIfTransTable | not-accessible | current | A table represents the DSCP ingress translation mode on an interface. |
| 1.3.6.1.4.1.868.2.5.9.1.3.2.1 | RowtnQosExtDscpIfTransEntry | not-accessible | current | An entry in the table represents the DSCP ingress translation mode on an interface. |
| 1.3.6.1.4.1.868.2.5.9.1.3.2.1.1 | ColumntnQosExtDscpIfTransMode | read-write | current | Controls the ingress DSCP translation setting on an interface. |
| 1.3.6.1.4.1.868.2.5.9.1.3.3 | TabletnQosExtDscpIfTransMapTable | not-accessible | current | A table perform the ingress DSCP translation on an interface. |
| 1.3.6.1.4.1.868.2.5.9.1.3.3.1 | RowtnQosExtDscpIfTransMapEntry | not-accessible | current | A entry in this table perform the ingress DSCP translation on an interface. |
| 1.3.6.1.4.1.868.2.5.9.1.3.3.1.1 | ColumntnQosExtDscpIfTransMapDscp | not-accessible | current | The received frame carried DSCP value, used for DSCP transmit input. DSCP (Differentiated Services Code Point) is a field in the header of IP packets for packe… |
| 1.3.6.1.4.1.868.2.5.9.1.3.3.1.2 | ColumntnQosExtDscpIfTransMapToDscp | read-write | current | The mapping DSCP value from the frame DSCP value, used for DSCP classification. DSCP (Differentiated Services Code Point) is a field in the header of IP packet… |
| 1.3.6.1.4.1.868.2.5.9.1.3.4 | TabletnQosExtDscpClassifMapTable | not-accessible | current | A table represents the DSCP-Based QoS ingress classification mapping on an interface. |
| 1.3.6.1.4.1.868.2.5.9.1.3.4.1 | RowtnQosExtDscpClassifMapEntry | not-accessible | current | An entry in the table represents the DSCP-Based QoS ingress classification mapping on an interface. |
| 1.3.6.1.4.1.868.2.5.9.1.3.4.1.1 | ColumntnQosExtDscpClassifMapDscp | not-accessible | current | DSCP value used to map Qos class and DPL is either translated DSCP value or incoming frame DSCP value. |
| 1.3.6.1.4.1.868.2.5.9.1.3.4.1.2 | ColumntnQosExtDscpClassifMapTrust | read-write | current | Controls whether a specific DSCP value is trusted. Only frames with trused DSCP values are mapped to a specific QoS class and DPL. Frames with untrusted DSCP v… |
| 1.3.6.1.4.1.868.2.5.9.1.3.4.1.3 | ColumntnQosExtDscpClassifMapClass | read-write | current | The traffic class of the recieved frame mapped to. tnQosExtDscpClassifMapClass is a number in the range (0..(dot1dPortNumTrafficClasses-1)). |
| 1.3.6.1.4.1.868.2.5.9.1.3.4.1.4 | ColumntnQosExtDscpClassifMapDpl | read-write | current | The DP (Drop Precedence) level of the transmit frame mapped to |
| 1.3.6.1.4.1.868.2.5.9.1.3.5 | TabletnQosExtDscpIfClassifExtTable | not-accessible | current | A table represents the DSCP classification based on QoS class and DP level on an interface. |
| 1.3.6.1.4.1.868.2.5.9.1.3.5.1 | RowtnQosExtDscpIfClassifExtEntry | not-accessible | current | An entry in the table represents the DSCP classification based on QoS class and DP level on an interface. |
| 1.3.6.1.4.1.868.2.5.9.1.3.5.1.1 | ColumntnQosExtDscpIfClassifExtMode | read-write | current | Controls the ingress DSCP classification setting on an interface. Disable - No Ingress DSCP Classification. DSCP=0 - Classify if incoming (or translated if ena… |
| 1.3.6.1.4.1.868.2.5.9.1.3.6 | TabletnQosExtDscpIfClassifExtDscpTable | not-accessible | current | A table represents the DSCP classification mode per DSCP value. |
| 1.3.6.1.4.1.868.2.5.9.1.3.6.1 | RowtnQosExtDscpIfClassifExtDscpEntry | not-accessible | current | An entry in the table represents the DSCP classification mode per DSCP value. |
| 1.3.6.1.4.1.868.2.5.9.1.3.6.1.1 | ColumntnQosExtDscpIfClassifExtDscp | not-accessible | current | DSCP (Differentiated Services Code Point) is a field in the header of IP packets for packet classification purposes. The valid range is 0 - 63 |
| 1.3.6.1.4.1.868.2.5.9.1.3.6.1.2 | ColumntnQosExtDscpIfClassifExtDscpMode | read-write | current | Control the DSCP ingress classification mode on an interface. If port DSCP classification is 'selected', DSCP will be classified based on QoS class and DP leve… |
| 1.3.6.1.4.1.868.2.5.9.1.3.7 | TabletnQosExtDscpIfClassifExtMapTable | not-accessible | current | A table config the Dscp ingress classification mapping. |
| 1.3.6.1.4.1.868.2.5.9.1.3.7.1 | RowtnQosExtDscpIfClassifExtMapEntry | not-accessible | current | An entry in this table perform the Dscp ingress classification mapping. |
| 1.3.6.1.4.1.868.2.5.9.1.3.7.1.1 | ColumntnQosExtDscpIfClassifExtMapClass | not-accessible | current | The Traffic Class the received frame is mapped to. tnQosExtDscpIfClassifExtMapClass is a number in the range (0..(dot1dPortNumTrafficClasses-1)). |
| 1.3.6.1.4.1.868.2.5.9.1.3.7.1.2 | ColumntnQosExtDscpIfClassifExtMapDpl | not-accessible | current | The DP (Drop Precedence) level the received frame is mapped to. |
| 1.3.6.1.4.1.868.2.5.9.1.3.7.1.3 | ColumntnQosExtDscpIfClassifExtMapDscp | read-write | current | The Classified DSCP from QoS class and DP level. The DSCP which needs to be classified depends on interface DSCP classification and DSCP classification mode. I… |
| 1.3.6.1.4.1.868.2.5.9.1.3.8 | TabletnQosExtDscpIfEgressRemarkTable | not-accessible | current | A table represents the DSCP egress remark mode on an interface. |
| 1.3.6.1.4.1.868.2.5.9.1.3.8.1 | RowtnQosExtDscpIfEgressRemarkEntry | not-accessible | current | An entry in the table represents the DSCP egress remark mode on an interface. |
| 1.3.6.1.4.1.868.2.5.9.1.3.8.1.1 | ColumntnQosExtDscpIfEgressRemarkMode | read-write | current | Controls the egress frame DSCP field rewrite setting per port. Disable: No Egress rewrite. Enable: Rewrite enable without remapped. Remap DP Unaware: DSCP from… |
| 1.3.6.1.4.1.868.2.5.9.1.3.9 | TabletnQosExtDscpIfEgressRemarkMapTable | not-accessible | current | A table represents the DSCP egress remark map on an interface. |
| 1.3.6.1.4.1.868.2.5.9.1.3.9.1 | RowtnQosExtDscpIfEgressRemarkMapEntry | not-accessible | current | An entry in the table represents the DSCP egress remark map on an interface. |
| 1.3.6.1.4.1.868.2.5.9.1.3.9.1.1 | ColumntnQosExtDscpIfEgressRemarkMapDscp | not-accessible | current | The classified DSCP value of the specific IP frame, used for DSCP egress remark. DSCP valid range is 0 - 63 |
| 1.3.6.1.4.1.868.2.5.9.1.3.9.1.2 | ColumntnQosExtDscpIfEgressRemarkMapDpl | not-accessible | current | The classified DP (Drop Precedence) level of the specific frame, used for DSCP egress remark. |
| 1.3.6.1.4.1.868.2.5.9.1.3.9.1.3 | ColumntnQosExtDscpIfEgressRemarkMapToDscp | read-write | current | The DSCP value to which you want to remap for the egress side. This remap is based on classified DSCP and DP level. |
| 1.3.6.1.4.1.868.2.5.9.1.4 | NodetnQosExtQclMgmt | |||
| 1.3.6.1.4.1.868.2.5.9.1.4.1 | TabletnQosExtQclTable | not-accessible | current | A table used to configure the QoS Control List settings. |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1 | RowtnQosExtQclEntry | not-accessible | current | An entry in the table used to configure the QoS Control List settings. |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.1 | ColumntnQosExtQclIndex | not-accessible | current | The row index of the QCL. |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.2 | ColumntnQosExtQclId | read-only | current | The identifier of the QCL. |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.3 | ColumntnQosExtQclNextQclId | read-create | current | Specify the created ECE is placed before which QCL. |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.4 | ColumntnQosExtQclPortList | read-create | current | The list of port members for the QCL. |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.5 | ColumntnQosExtQclTagType | read-create | current | The frame tag type for matching the QCL. The possible values are: tagged: The QCL will match tagged frames only. untagged: The QCL will match untagged frames o… |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.6 | ColumntnQosExtQclTagVlanType | read-create | current | The VLAN ID filter type for matching the QCL. It is only significant if tnQosExtQclTagType is 'tagged' or 'any'. The possible values are: any: No VLAN ID filte… |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.7 | ColumntnQosExtQclTagVlanVal | read-create | current | The Specific VLAN ID filter for matching the QCL. It is only significant if tnQosExtQclTagVlanType is selected 'specific'. |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.8 | ColumntnQosExtQclTagVlanMin | read-create | current | The Start of Range VLAN ID filter for matching the QCL. It is only significant if tnQosExtQclTagVlanType is selected 'range'. this value should be lower than t… |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.9 | ColumntnQosExtQclTagVlanMax | read-create | current | The End of Range VLAN ID filter for matching the QCL. It is only significant if tnQosExtQclTagVlanType is selected 'range'. this value should be higher than tn… |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.10 | ColumntnQosExtQclTagPcp | read-create | current | The PCP value for mataching the QCL. It is only significant if tnQosExtQclTagType is 'tagged' or 'any'. The possible values are: any: The QCL will match any PC… |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.11 | ColumntnQosExtQclTagDei | read-create | current | The DEI value for mataching the QCL. It is only significant if tnQosExtQclTagType is 'tagged' or 'any'. The possible values are: 'any', 'dei0' or 'dei1'. |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.12 | ColumntnQosExtQclSMacType | read-create | current | The source MAC address filter type for matching the QCL. The possible values are: any: No source MAC address filter is specified. (source MAC address filter st… |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.13 | ColumntnQosExtQclSMac | read-create | current | The source MAC address filter for matching the QCL. In S3280 implement, only MAC OUI(first three octets) are used for MAC address matching process. |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.14 | ColumntnQosExtQclDMacType | read-create | current | The destination MAC address filter for matching the QCL. The possible values are: any: No destination MAC address filter is specified. (destination MAC address… |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.15 | ColumntnQosExtQclFrameType | read-create | current | The frame type for the QCL. The possible values are: any: The QCL will match any frame type. ethernet: The QCL will match Ethernet frame type. llc: The QCL wil… |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.16 | ColumntnQosExtQclActClassDefault | read-create | current | Determe the type of matched frame traffic class modification. default: QCL do not change the traffic class of the matched received frames. specific: QCL will c… |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.17 | ColumntnQosExtQclActClass | read-create | current | If a frame matches the QCE it will be put in the queue. It is only significant if tnQosExtQclActClassDefault is selected 'specific' value. tnQosExtQclActClass … |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.18 | ColumntnQosExtQclActDplDefault | read-create | current | Determe the type of matched frame traffic DP (Drop Precedence) level modification. default: QCL do not change the DP (Drop Precedence) level of the matched rec… |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.19 | ColumntnQosExtQclActDpl | read-create | current | If a frame matches the QCE then DP level will set to the value. It is only significant if tnQosExtQclActDplDefault is selected 'specific' value. |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.20 | ColumntnQosExtQclActDscpDefault | read-create | current | Determe the type of matched frame DSCP modification. default: QCL do not change the DSCP of the matched received frames. specific: QCL will change the DSCP to … |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.21 | ColumntnQosExtQclActDscp | read-create | current | If a frame matches the QCE then DSCP will be classified with the value. It is only significant if tnQosExtQclActDscpDefault is selected 'specific' value. |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.22 | ColumntnQosExtQclConflict | read-only | current | QCE status. It may be that resources required to add a QCE may not be available; in that case it shows conflict status as 'yes', otherwise it is always 'no'. |
| 1.3.6.1.4.1.868.2.5.9.1.4.1.1.23 | ColumntnQosExtQclStatus | read-create | current | The status of this conceptual row entry of QCL table. This object isused to manage the creation and deletion of conceptual rows. The status column has six defi… |
| 1.3.6.1.4.1.868.2.5.9.1.4.2 | TabletnQosExtQclL2Table | not-accessible | current | A table used to configure the QoS Control List layer 2 frame settings. |
| 1.3.6.1.4.1.868.2.5.9.1.4.2.1 | RowtnQosExtQclL2Entry | not-accessible | current | An entry in the table used to configure the QoS Control List layer 2 fram settings. |
| 1.3.6.1.4.1.868.2.5.9.1.4.2.1.1 | ColumntnQosExtQclEtherType | read-write | current | The Ether type filter for matching the QCL. It is only significant if tnQosExtQclFrameType 'ethernet' is selected. The possible values are: any: No Ether type … |
| 1.3.6.1.4.1.868.2.5.9.1.4.2.1.2 | ColumntnQosExtQclEtherVal | read-write | current | When tnQosExtQclEtherType is selected 'Specific' value, you can enter a specific value. The allowed value is from 0x0600 through 0xFFFF. If implement supports … |
| 1.3.6.1.4.1.868.2.5.9.1.4.2.1.3 | ColumntnQosExtQclLlcSsapType | read-write | current | The LLC SSAP type filter for matching the QCL. It is only significant if tnQosExtQclFrameType 'llc' is selected. The possible values are: any: No SSAP type fil… |
| 1.3.6.1.4.1.868.2.5.9.1.4.2.1.4 | ColumntnQosExtQclLlcSsapVal | read-write | current | When tnQosExtQclLlcSsapType is selected 'Specific' value, you can enter a specific value. The allowed value is from 0 through 255. |
| 1.3.6.1.4.1.868.2.5.9.1.4.2.1.5 | ColumntnQosExtQclLlcDsapType | read-write | current | The LLC DSAP type filter for matching the QCL. It is only significant if tnQosExtQclFrameType 'llc' is selected. The possible values are: any: No DSAP type fil… |
| 1.3.6.1.4.1.868.2.5.9.1.4.2.1.6 | ColumntnQosExtQclLlcDsapVal | read-write | current | When tnQosExtQclLlcDsapType is selected 'Specific' value, you can enter a specific value. The allowed value is from 0 through 255. |
| 1.3.6.1.4.1.868.2.5.9.1.4.2.1.7 | ColumntnQosExtQclLlcControlType | read-write | current | The LLC Control type filter for matching the QCL. It is only significant if tnQosExtQclFrameType 'llc' is selected. The possible values are: any: No Control ty… |
| 1.3.6.1.4.1.868.2.5.9.1.4.2.1.8 | ColumntnQosExtQclLlcControlVal | read-write | current | When tnQosExtQclLlcControlType is selected 'Specific' value, you can enter a specific value. The allowed value is from 0 through 255. |
| 1.3.6.1.4.1.868.2.5.9.1.4.2.1.9 | ColumntnQosExtQclSnapPidType | read-write | current | The SNAP PID type filter for matching the QCL. It is only significant if tnQosExtQclFrameType 'snap' is selected. The possible values are: any: No SNAP PIDtype… |
| 1.3.6.1.4.1.868.2.5.9.1.4.2.1.10 | ColumntnQosExtQclSnapPidVal | read-write | current | When tnQosExtQclSnapPidType is selected 'Specific' value, you can enter a specific value. The allowed value is from 0x600 through 0xFFFF. If implement supports… |
| 1.3.6.1.4.1.868.2.5.9.1.4.3 | TabletnQosExtQclIpTable | not-accessible | current | A table used to configure the QoS Control List IP settings. |
| 1.3.6.1.4.1.868.2.5.9.1.4.3.1 | RowtnQosExtQclIpEntry | not-accessible | current | An entry in the table used to configure the QoS Control List IP settings. |
| 1.3.6.1.4.1.868.2.5.9.1.4.3.1.1 | ColumntnQosExtQclProtoType | read-write | current | The IP protocol for matching the QCL.The possible values are: any: No protocol filter is specified. (Protocol filter status is 'don't-care'.) udp: Specify the … |
| 1.3.6.1.4.1.868.2.5.9.1.4.3.1.2 | ColumntnQosExtQclProtoVal | read-write | current | When tnQosExtQclProtoType is selected 'Specific' value, you can enter a specific value. The allowed value is from 0 through 255. If implement supports udp or t… |
| 1.3.6.1.4.1.868.2.5.9.1.4.3.1.3 | ColumntnQosExtQclDscpType | read-write | current | The DSCP filter for matching the QCL. The possible values are: any: No DSCP filter is specified. (DSCP filter status is 'don't-care'.) specific: choose this va… |
| 1.3.6.1.4.1.868.2.5.9.1.4.3.1.4 | ColumntnQosExtQclDscpVal | read-write | current | When tnQosExtQclDscpType is selected 'Specific' value, you can enter a specific value. The allowed value is from 0 through 63. |
| 1.3.6.1.4.1.868.2.5.9.1.4.3.1.5 | ColumntnQosExtQclDscpMin | read-write | current | When tnQosExtQclDscpType is selected 'Range' value, you can enter a specific range. this value should be lower than tnQosExtQclDscpMax value. The allowed range… |
| 1.3.6.1.4.1.868.2.5.9.1.4.3.1.6 | ColumntnQosExtQclDscpMax | read-write | current | When tnQosExtQclDscpType is selected 'Range' value, you can enter a specific range. this value should be higher than tnQosExtQclDscpMin value. The allowed rang… |
| 1.3.6.1.4.1.868.2.5.9.1.4.3.1.7 | ColumntnQosExtQclSrcIpType | read-write | current | The source IP address type filter for matching the QCL. The possible values are: any: No source IP address filter is specified. (source IP address filter statu… |
| 1.3.6.1.4.1.868.2.5.9.1.4.3.1.8 | ColumntnQosExtQclSrcIpAddrType | read-write | current | Specify the tnQosExtQclSrcIpAddr type. |
| 1.3.6.1.4.1.868.2.5.9.1.4.3.1.9 | ColumntnQosExtQclSrcIpAddr | read-write | current | When tnQosExtQclSrcIpType is selected 'Specific' value, you can enter a specific host or network address. |
| 1.3.6.1.4.1.868.2.5.9.1.4.3.1.10 | ColumntnQosExtQclSrcIpMaskType | read-write | current | Specify the tnQosExtQclSrcIpMask type. |
| 1.3.6.1.4.1.868.2.5.9.1.4.3.1.11 | ColumntnQosExtQclSrcIpMask | read-write | current | When tnQosExtQclSrcIpType is selected 'Specific' value, you can enter a specific network mask for the source IP address. |
| 1.3.6.1.4.1.868.2.5.9.1.4.3.1.12 | ColumntnQosExtQclIpv4Fragment | read-write | current | The IPv4 Fragment for matching the QCL. This involves the settings for the More Fragments (MF) bit and the Fragment Offset (FRAG OFFSET) field for an IPv4 fram… |
| 1.3.6.1.4.1.868.2.5.9.1.4.3.1.13 | ColumntnQosExtQclTcpUdpSportType | read-write | current | The TCP/UDP source port for matching the QCL. It is only significant if protocol filter 'UDP' or 'TCP' is selected. The possible values are: any: No TCP/UDP so… |
| 1.3.6.1.4.1.868.2.5.9.1.4.3.1.14 | ColumntnQosExtQclTcpUdpSportVal | read-write | current | When tnQosExtQclTcpUdpSportType is selected 'Specific' value, you can enter a specific value. The allowed value is from 0 through 65535. |
| 1.3.6.1.4.1.868.2.5.9.1.4.3.1.15 | ColumntnQosExtQclTcpUdpSportMin | read-write | current | When tnQosExtQclTcpUdpSportType is selected 'Range' value, you can enter a specific range. this value should be lower than tnQosExtQclTcpUdpSportMax value. The… |
| 1.3.6.1.4.1.868.2.5.9.1.4.3.1.16 | ColumntnQosExtQclTcpUdpSportMax | read-write | current | When tnQosExtQclTcpUdpSportType is selected 'Range' value, you can enter a specific range. this value should be higher than tnQosExtQclTcpUdpSportMin value. Th… |
| 1.3.6.1.4.1.868.2.5.9.1.4.3.1.17 | ColumntnQosExtQclTcpUdpDportType | read-write | current | The TCP/UDP destination port for matching the QCL. It only significant if protocol filter 'UDP' or 'TCP' is selected. The possible values are: any: No TCP/UDP … |
| 1.3.6.1.4.1.868.2.5.9.1.4.3.1.18 | ColumntnQosExtQclTcpUdpDportVal | read-write | current | When tnQosExtQclTcpUdpDportVal is selected 'Specific' value, you can enter a specific value. The allowed value is from 0 through 65535. |
| 1.3.6.1.4.1.868.2.5.9.1.4.3.1.19 | ColumntnQosExtQclTcpUdpDportMin | read-write | current | When tnQosExtQclTcpUdpDportVal is selected 'Range' value, you can enter a specific range. this value should be lower than tnQosExtQclTcpUdpDportMax value. The … |
| 1.3.6.1.4.1.868.2.5.9.1.4.3.1.20 | ColumntnQosExtQclTcpUdpDportMax | read-write | current | When tnQosExtQclTcpUdpDportVal is selected 'Range' value, you can enter a specific range. this value should be higher than tnQosExtQclTcpUdpDportMin value. The… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| TnQosExtRateInFps | INTEGER { fps1(1), fps2(2), fps4(3), fps8(4), fps16(5), fps32(6), fps64(7), fps128(8), fps256(9), fps512(10), fps1k(11), fps2k(12), fps4k(13), fps8k(14), fps16k(15), fps32k(16), fps64k(17), fps128k(18), fps256k(19), fps512k(20), fps1024k(21), fps2048k(22), fps4096k(23), fps8192k(24), fps16384k(25), fps32768k(26) } | current | T |
| TnQosExtRateUnitType | INTEGER { kbps(1), fps(2), mbps(3), kfps(4) } | current | T |