TN-RFC2544-MIB
51 objects
The MIB provides functionalities for RFC 2544 Performance Test Commands.
Imported Objects
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus |
| TRANSITION-SMI | tnProducts |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.5.153 | IdentitytnRFC2544 | The MIB provides functionalities for RFC 2544 Performance Test Commands. | ||
| 1.3.6.1.4.1.868.2.5.153.1 | TabletnRFC2544ProfileTable | not-accessible | current | This table is used to maintain the RFC2544 Profile Entries. |
| 1.3.6.1.4.1.868.2.5.153.1.1 | RowtnRFC2544ProfileEntry | not-accessible | current | Entries in this table correspond to the RFC2544 Profile Entries. |
| 1.3.6.1.4.1.868.2.5.153.1.1.2 | ColumntnRFC2544ProfileDescription | read-write | current | The description of this table. |
| 1.3.6.1.4.1.868.2.5.153.2 | TabletnRFC2544ConfigCommonParamTable | not-accessible | current | This table is used to maintain the RFC2544 Profile Configuration Common Parameters Entries. |
| 1.3.6.1.4.1.868.2.5.153.2.1 | RowtnRFC2544ConfigCommonParamEntry | not-accessible | current | Entries in this table correspond to the RFC2544 Profile Configuration Common Parameters Entries. |
| 1.3.6.1.4.1.868.2.5.153.2.1.1 | ColumntnRFC2544ConfigCommonParamName | read-write | current | The name, ASCII range 33-126, of this table. |
| 1.3.6.1.4.1.868.2.5.153.2.1.2 | ColumntnRFC2544ConfigCommonParamDescription | read-write | current | The description of this table. |
| 1.3.6.1.4.1.868.2.5.153.2.1.3 | ColumntnRFC2544ConfigCommonParamMEGLevel | read-write | current | MEG Level of this table. |
| 1.3.6.1.4.1.868.2.5.153.2.1.4 | ColumntnRFC2544ConfigCommonParamEgressPort | read-write | current | Egress Port of this table. |
| 1.3.6.1.4.1.868.2.5.153.2.1.5 | ColumntnRFC2544ConfigCommonParamSequenceNumberCheck | read-write | current | Sequence Number Check disable/enable of this table. |
| 1.3.6.1.4.1.868.2.5.153.2.1.6 | ColumntnRFC2544ConfigCommonParamDwellTime | read-write | current | Dwell Time, in seconds, of this table. |
| 1.3.6.1.4.1.868.2.5.153.2.1.7 | ColumntnRFC2544ConfigCommonParamType | read-write | current | Type of this table. |
| 1.3.6.1.4.1.868.2.5.153.2.1.8 | ColumntnRFC2544ConfigCommonParamVLANID | read-write | current | VLAN ID of this table. |
| 1.3.6.1.4.1.868.2.5.153.2.1.9 | ColumntnRFC2544ConfigCommonParamPCP | read-write | current | PCP of this table. |
| 1.3.6.1.4.1.868.2.5.153.2.1.10 | ColumntnRFC2544ConfigCommonParamDEI | read-write | current | DEI of this table. |
| 1.3.6.1.4.1.868.2.5.153.2.1.11 | ColumntnRFC2544ConfigCommonParamDMAC | read-create | current | The DMAC, 00-00-00-00-00-00 formatted, of this table. |
| 1.3.6.1.4.1.868.2.5.153.2.1.12 | ColumntnRFC2544ConfigCommonParamFrameSizeMask | read-write | current | Frame Size Mask of this table. Bit 0 - 64 byte frames enabled if set to 1. Bit 1 - 128 byte frames enabled if set to 1. Bit 2 - 256 byte frames enabled if set … |
| 1.3.6.1.4.1.868.2.5.153.2.1.13 | ColumntnRFC2544ConfigCommonParamTestsToRunMask | read-write | current | Tests To Run Mask of this table. Bit 0 - Throughput Test enabled if set to 1. Bit 1 - Latency Test enabled if set to 1. Bit 2 - Frame Loss Test enabled if set … |
| 1.3.6.1.4.1.868.2.5.153.2.1.14 | ColumntnRFC2544ConfigCommonRowStatus | read-create | current | - 'noAction', Do nothing. - 'create', create a profile. - 'delete', delete a profile. |
| 1.3.6.1.4.1.868.2.5.153.3 | TabletnRFC2544ConfigThroughputTestParamTable | read-write | current | This table is used to maintain the RFC2544 Profile Config Throughput Test Parameters Entries. |
| 1.3.6.1.4.1.868.2.5.153.3.1 | RowtnRFC2544ConfigThroughputTestParamEntry | read-write | current | Entries in this table correspond to the RFC2544 Profile Config Throughput Test Parameters Entries. |
| 1.3.6.1.4.1.868.2.5.153.3.1.1 | ColumntnRFC2544ConfigThroughputTestParamTrialDuration | read-write | current | Trial Duration, in seconds, of this table. |
| 1.3.6.1.4.1.868.2.5.153.3.1.2 | ColumntnRFC2544ConfigThroughputTestParamMinRate | read-write | current | Minimum Rate, in permille, of this table. |
| 1.3.6.1.4.1.868.2.5.153.3.1.3 | ColumntnRFC2544ConfigThroughputTestParamMaxRate | read-write | current | Maximum Rate, in permille, of this table. |
| 1.3.6.1.4.1.868.2.5.153.3.1.4 | ColumntnRFC2544ConfigThroughputTestParamAccuracy | read-write | current | Accuracy, in permille, of this table. |
| 1.3.6.1.4.1.868.2.5.153.3.1.5 | ColumntnRFC2544ConfigThroughputTestParamAllowedFrameLoss | read-write | current | Allowed Frame Loss, in permille, of this table. |
| 1.3.6.1.4.1.868.2.5.153.4 | TabletnRFC2544ConfigLatencyTestParamTable | not-accessible | current | This table is used to maintain the RFC2544 Profile Config Latency Test Parameters Entries. |
| 1.3.6.1.4.1.868.2.5.153.4.1 | RowtnRFC2544ConfigLatencyTestParamEntry | not-accessible | current | Entries in this table correspond to the RFC2544 Profile Config Latency Test Parameters Entries. |
| 1.3.6.1.4.1.868.2.5.153.4.1.1 | ColumntnRFC2544ConfigLatencyTestParamTrialDuration | read-write | current | Trial Duration, in seconds, of this table. |
| 1.3.6.1.4.1.868.2.5.153.4.1.2 | ColumntnRFC2544ConfigLatencyTestParamDelayMeasurementInterval | read-write | current | Delay Measurement Interval, in seconds, of this table. |
| 1.3.6.1.4.1.868.2.5.153.4.1.3 | ColumntnRFC2544ConfigLatencyTestParamAllowedFrameLoss | read-write | current | Allowed Frame Loss, in permille, of this table. |
| 1.3.6.1.4.1.868.2.5.153.5 | TabletnRFC2544ConfigFrameLossTestParamTable | not-accessible | current | This table is used to maintain the RFC2544 Profile Config Frame Loss Test Parameters Entries. |
| 1.3.6.1.4.1.868.2.5.153.5.1 | RowtnRFC2544ConfigFrameLossTestParamEntry | not-accessible | current | Entries in this table correspond to the RFC2544 Profile Config Frame Loss Test Parameters Entries. |
| 1.3.6.1.4.1.868.2.5.153.5.1.1 | ColumntnRFC2544ConfigFrameLossTestParamTrialDuration | read-write | current | Trial Duration, in seconds, of this table. |
| 1.3.6.1.4.1.868.2.5.153.5.1.2 | ColumntnRFC2544ConfigFrameLossTestParamMinRate | read-write | current | Minimum Rate, in permille, of this table. |
| 1.3.6.1.4.1.868.2.5.153.5.1.3 | ColumntnRFC2544ConfigFrameLossTestParamMaxRate | read-write | current | Maximum Rate, in permille, of this table. |
| 1.3.6.1.4.1.868.2.5.153.5.1.4 | ColumntnRFC2544ConfigFrameLossTestParamRateStep | read-write | current | Rate Step, in permille, of this table. |
| 1.3.6.1.4.1.868.2.5.153.6 | TabletnRFC2544ConfigBackToBackTestParamTable | not-accessible | current | This table is used to maintain the RFC2544 Profile Config Back To Back Test Param Entries. |
| 1.3.6.1.4.1.868.2.5.153.6.1 | RowtnRFC2544ConfigBackToBackTestParamEntry | not-accessible | current | Entries in this table correspond to the RFC2544 Profile Configuration Back To Back Test Parameters Entries. |
| 1.3.6.1.4.1.868.2.5.153.6.1.1 | ColumntnRFC2544ConfigBackToBackTestParamTrialDuration | read-write | current | Trial Duration, in seconds, of this table. |
| 1.3.6.1.4.1.868.2.5.153.6.1.2 | ColumntnRFC2544ConfigBackToBackTestParamTrialCount | read-write | current | Trial count of this table. |
| 1.3.6.1.4.1.868.2.5.153.7 | TabletnRFC2544ReportTable | not-accessible | current | This table is used to maintain the RFC2544 Profile Config Back To Back Test Param Entries. |
| 1.3.6.1.4.1.868.2.5.153.7.1 | RowtnRFC2544ReportEntry | not-accessible | current | Entries in this table correspond to the RFC2544 Profile Configuration Back To Back Test Parameters Entries. |
| 1.3.6.1.4.1.868.2.5.153.7.1.1 | ColumntnRFC2544ReportName | read-write | current | Name of the report. |
| 1.3.6.1.4.1.868.2.5.153.7.1.2 | ColumntnRFC2544ReportDescr | read-write | current | Report description. |
| 1.3.6.1.4.1.868.2.5.153.7.1.3 | ColumntnRFC2544ProfileName | read-create | current | Name of profile. |
| 1.3.6.1.4.1.868.2.5.153.7.1.4 | ColumntnRFC2544CreateTime | read-create | current | Name of profile. |
| 1.3.6.1.4.1.868.2.5.153.7.1.5 | ColumntnRFC2544ReportStatus | read-only | current | Report status. |
| 1.3.6.1.4.1.868.2.5.153.7.1.6 | ColumntnRFC2544DownloadTFTPServer | read-write | current | TFTP server URL on the form tftp://server[:port]/path-to-file to place the report when a save report is next requested via this MIB. This value is set to zero … |
| 1.3.6.1.4.1.868.2.5.153.7.1.7 | ColumntnRFC2544ReportAction | read-create | current | - 'noAction', Do nothing. - 'createAndRun', create a report and start execution of the test. - 'cancel', cancel a test that is running. - 'delete', delete a te… |