TN-VLAN-MGMT-MIB
147 objects
The mib module for managing VLAN and QoS in TN platform products.
Imported Objects
| DOT3-OAM-MIB | EightOTwoOui |
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| Q-BRIDGE-MIB | PortList VlanIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| TRANSITION-SMI | tnProducts |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.5.4 | IdentitytnVlanQoSMgmtMIB | The mib module for managing VLAN and QoS in TN platform products. | ||
| 1.3.6.1.4.1.868.2.5.4.0 | NodetnVlanQoSMgmtNotifications | |||
| 1.3.6.1.4.1.868.2.5.4.0.1 | NotificationtnIfSourceAddrChangeEvt | current | A tnIfSourceAddrChangeEvt event is sent when the tnIfSourceAddrLock is set to 'true', the ionIfSourceAddrLockAction is set to 'discardAndNotify' or 'all' and t… | |
| 1.3.6.1.4.1.868.2.5.4.1 | NodetnVlanQoSMgmtObjects | |||
| 1.3.6.1.4.1.868.2.5.4.1.1 | NodetnSysVlanMgmt | |||
| 1.3.6.1.4.1.868.2.5.4.1.1.1 | TabletnSysManagmentVLANTable | not-accessible | current | Management VLAN configuration table. |
| 1.3.6.1.4.1.868.2.5.4.1.1.1.1 | RowtnSysManagmentVLANEntry | not-accessible | current | Each entry represents the management VLAN entry on a device. |
| 1.3.6.1.4.1.868.2.5.4.1.1.1.1.1 | ColumntnSysMgmtVLANStatus | read-write | current | The device if management VLAN capable, can enable the secure channel for all its management traffic by setting this variable to enabled(1). |
| 1.3.6.1.4.1.868.2.5.4.1.1.1.1.2 | ColumntnSysMgmtVLANId | read-write | current | The VLAN id, that this device will use for its management traffic. All Management frames to this device when 'tnSysManagmentVLANStatus' is set to 'enabled(1)' … |
| 1.3.6.1.4.1.868.2.5.4.1.1.1.1.3 | ColumntnSysMgmtMemberPorts | read-write | current | The ports on this device which are members of this Management VLAN. This is for security, some ports can be made not a member, which blocks all management acce… |
| 1.3.6.1.4.1.868.2.5.4.1.1.2 | TabletnSysVLANExtTable | not-accessible | current | System VLAN external configuration table. |
| 1.3.6.1.4.1.868.2.5.4.1.1.2.1 | RowtnSysVLANExtEntry | not-accessible | current | Each entry represents the VLAN config on a device. |
| 1.3.6.1.4.1.868.2.5.4.1.1.2.1.1 | ColumntnSysVlanExtMgmtPortType | read-write | current | This mib variable is applicable for products that have a out of band management port. This determines the Port type for all management traffic.It can be one of… |
| 1.3.6.1.4.1.868.2.5.4.1.1.2.1.2 | ColumntnSysVLANExtCustomSTag | read-write | current | This field specifies the Ether type used for Custom S-ports. This is a global setting and is applicable for all Custom S-ports. This field is used when TPID ot… |
| 1.3.6.1.4.1.868.2.5.4.1.1.2.1.3 | ColumntnVlanConfigGlobalsMainAccessVlans0To1K | read-write | current | First quarter of bit-array indicating the enabled access VLANs. |
| 1.3.6.1.4.1.868.2.5.4.1.1.2.1.4 | ColumntnVlanConfigGlobalsMainAccessVlans1KTo2K | read-write | current | Second quarter of bit-array indicating the enabled access VLANs. |
| 1.3.6.1.4.1.868.2.5.4.1.1.2.1.5 | ColumntnVlanConfigGlobalsMainAccessVlans2KTo3K | read-write | current | Third quarter of bit-array indicating the enabled access VLANs. |
| 1.3.6.1.4.1.868.2.5.4.1.1.2.1.6 | ColumntnVlanConfigGlobalsMainAccessVlans3KTo4K | read-write | current | Last quarter of bit-array indicating the enabled access VLANs. |
| 1.3.6.1.4.1.868.2.5.4.1.2 | NodetnDevSysPriorityMgmt | |||
| 1.3.6.1.4.1.868.2.5.4.1.2.1 | TabletnSwIPPrioTable | not-accessible | current | IP Traffic class table. |
| 1.3.6.1.4.1.868.2.5.4.1.2.1.1 | RowtnSwIPPrioEntry | not-accessible | current | Each entry represents the remapped value for each traffic class. |
| 1.3.6.1.4.1.868.2.5.4.1.2.1.1.1 | ColumntnSwIPPrioIndex | read-only | current | The IP traffic class remap table index. The indexing is for a bridge entity |
| 1.3.6.1.4.1.868.2.5.4.1.2.1.1.2 | ColumntnSwIPPrioTC | read-only | current | The IP traffic class value. |
| 1.3.6.1.4.1.868.2.5.4.1.2.1.1.3 | ColumntnSwIPPrioRemap | read-write | current | The frames with IP traffic class set, will be remapped to the listed priority queues. |
| 1.3.6.1.4.1.868.2.5.4.1.2.2 | TabletnSwIEEEPrioTable | not-accessible | current | IEEE priority remapping table. |
| 1.3.6.1.4.1.868.2.5.4.1.2.2.1 | RowtnSwIEEEPrioEntry | not-accessible | current | Each entry represents the remapped value for each priority class. |
| 1.3.6.1.4.1.868.2.5.4.1.2.2.1.1 | ColumntnSwIEEEPriority | read-only | current | The IEEE tag priority bits in the frame. |
| 1.3.6.1.4.1.868.2.5.4.1.2.2.1.2 | ColumntnSwIEEEPriorityRemap | read-write | current | The frames with IEEE priority bits set, will be mapped to the listed priority queues. |
| 1.3.6.1.4.1.868.2.5.4.1.3 | NodetnInterfaceQoSMgmt | |||
| 1.3.6.1.4.1.868.2.5.4.1.3.1 | TabletnIfPriorityTable | not-accessible | current | This table has entries for interfaces which are capable of Priority management. |
| 1.3.6.1.4.1.868.2.5.4.1.3.1.1 | RowtnIfPriorityEntry | not-accessible | current | A entry in the table represents Priority configuration. |
| 1.3.6.1.4.1.868.2.5.4.1.3.1.1.1 | ColumntnIfDefaultPriority | read-write | current | The default priority for frames ingressing this port, if it doesnt have any IEEE 802.3ac tag or any IP TOS/Diffserv traffic class fields. |
| 1.3.6.1.4.1.868.2.5.4.1.3.1.1.2 | ColumntnIfUseIEEEPriority | read-write | current | If the frame is IEEE tagged, and this mib variable is set to 'true', the 802.1p bits are used as the frames priority. |
| 1.3.6.1.4.1.868.2.5.4.1.3.1.1.3 | ColumntnIfUseIPPriority | read-write | current | If the frame has IP TOS/Diffserv traffic class fields, and this mib variable is set to 'true'. The traffic class fields will be used as the frame's priority. |
| 1.3.6.1.4.1.868.2.5.4.1.3.1.1.4 | ColumntnIfUseIPOrIEEEPriority | read-write | current | If the frame has IP TOS/Diffserv traffic class fields, and IEEE 802.3ac tagged, then this mib variable decides which one is to be considered as the frame's pri… |
| 1.3.6.1.4.1.868.2.5.4.1.3.1.1.5 | ColumntnIfSrcMACPriorityRemap | read-write | current | When set to true(1), a frame's Source MAC address decides the priority of the frame. The new priority value is assigned based on the priority assigned to that … |
| 1.3.6.1.4.1.868.2.5.4.1.3.1.1.6 | ColumntnIfDstMACPriorityRemap | read-write | current | When set to true(1), a frame's Destination MAC address decides the priority of the frame. The new priority value is assigned based on the priority assigned to … |
| 1.3.6.1.4.1.868.2.5.4.1.3.1.1.7 | ColumntnIfVIDPriorityRemap | read-write | current | When set to true(1), a frame's VLAN id decides the priority of the frame. The new priority value is assigned based on the priority assigend to that VLAN id in … |
| 1.3.6.1.4.1.868.2.5.4.1.3.2 | TabletnIfPriorityRemapTable | not-accessible | current | This table has entries for each interface's IEEE priority remapping. |
| 1.3.6.1.4.1.868.2.5.4.1.3.2.1 | RowtnIfPriorityRemapEntry | not-accessible | current | A entry in the table represents Priority remapping for an interface. |
| 1.3.6.1.4.1.868.2.5.4.1.3.2.1.1 | ColumntnIfUserPriority | read-only | current | The priority found in the frames ingressing this interface. Frames which are untagged take up the interface's priority. |
| 1.3.6.1.4.1.868.2.5.4.1.3.2.1.2 | ColumntnIfRemappedPriority | read-write | current | The frame's priority is remapped to this new priority value. Frames that egress tagged will have the remapped priority. |
| 1.3.6.1.4.1.868.2.5.4.1.4 | NodetnInterfaceVlanMgmt | |||
| 1.3.6.1.4.1.868.2.5.4.1.4.1 | TabletnIfVLANTable | not-accessible | current | This table has entries for interfaces which are VLAN capable. |
| 1.3.6.1.4.1.868.2.5.4.1.4.1.1 | RowtnIfVLANEntry | not-accessible | current | A entry in the table represents VLAN configuration on an interface. |
| 1.3.6.1.4.1.868.2.5.4.1.4.1.1.1 | ColumntnIfDot1qState | read-write | current | The IEEE802.1Q status of this interface. |
| 1.3.6.1.4.1.868.2.5.4.1.4.1.1.2 | ColumntnIfDiscardTagged | read-write | current | This filters all tagged non-management frames ingressing this port. All untagged and priority tagged frames are processed as normal frames. |
| 1.3.6.1.4.1.868.2.5.4.1.4.1.1.3 | ColumntnIfDiscardUntagged | read-write | current | This filters all untagged and priority tagged non-management frames ingressing this port. All frames .1Q tagged frames are processed as normal frames. |
| 1.3.6.1.4.1.868.2.5.4.1.4.1.1.4 | ColumntnIfDefaultVlanId | read-write | current | The interface's default Vlan id. This VLAN id is given to untagged frames on ingress into the device. |
| 1.3.6.1.4.1.868.2.5.4.1.4.1.1.5 | ColumntnIfForceDefaultVlanId | read-write | current | This forces all untagged and (802.1Q)tagged frames to take up the interface's ionIfDefaultVlanId. |
| 1.3.6.1.4.1.868.2.5.4.1.4.2 | TabletnIfVLANTagMgmtTable | not-accessible | current | This table has entries for interfaces which are VLAN capable. |
| 1.3.6.1.4.1.868.2.5.4.1.4.2.1 | RowtnIfVLANTagMgmtEntry | not-accessible | current | A entry in the table represents VLAN configuration on an interface. |
| 1.3.6.1.4.1.868.2.5.4.1.4.2.1.1 | ColumntnIfFrameTagMode | read-write | current | The interface's taggin mode. The interface can be set as : network(1) - This is the normal network mode. It can take untagged and 802.3ac tagged frames. In thi… |
| 1.3.6.1.4.1.868.2.5.4.1.4.2.1.2 | ColumntnIfProviderEtherType | read-write | current | This ether type is used when an interface is set to 'provider' mode. Frames are considered tagged only if the ether type matches this value. |
| 1.3.6.1.4.1.868.2.5.4.1.4.2.1.3 | ColumntnIfNetworkModeTagging | read-write | current | This is available only when 'ionIfFrameTagMode' is set to 'network(1)' mode. In unmodified(1) - Frames are unmodified, the egress the same as they ingress this… |
| 1.3.6.1.4.1.868.2.5.4.1.4.3 | TabletnIfVLANTagMgmt2Table | not-accessible | current | This table has entries for interfaces which are VLAN capable. |
| 1.3.6.1.4.1.868.2.5.4.1.4.3.1 | RowtnIfVLANTagMgmt2Entry | not-accessible | current | A entry in the table represents VLAN configuration on an interface. |
| 1.3.6.1.4.1.868.2.5.4.1.4.3.1.1 | ColumntnIfVLANTagMgmt2PortType | read-write | current | A Port can be one of the following types: Unaware, C-port, S-port, or S-custom-port where: - Unaware: all frames are classified to the Port VLAN ID and tags ar… |
| 1.3.6.1.4.1.868.2.5.4.1.4.3.1.2 | ColumntnIfVLANTagMgmt2TxTagType | read-write | current | Determines egress tagging on a port: - Untag_pvid - All frames with classified VLAN as the PVID egress as untagged frames. - Tag_all - All frames which do not … |
| 1.3.6.1.4.1.868.2.5.4.1.4.3.1.3 | ColumntnIfVLANTagMgmt2ConfigConflicts | read-only | current | Shows the status of Conflicts whether one exists or not. When a Volatile VLAN User requests to set VLAN membership or VLAN port configuration, the following co… |
| 1.3.6.1.4.1.868.2.5.4.1.4.3.1.4 | ColumntnVlanConfigInterfaceMode | read-write | current | Determines the underlying port mode. Access ports are only members of one VLAN, the AccessVlan. Trunk ports are by default members of all VLANs, which can be l… |
| 1.3.6.1.4.1.868.2.5.4.1.4.3.1.5 | ColumntnVlanConfigInterfaceAllowVlans0KTo1K | read-write | current | First quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is hybrid. |
| 1.3.6.1.4.1.868.2.5.4.1.4.3.1.6 | ColumntnVlanConfigInterfaceAllowVlans1KTo2K | read-write | current | Second quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is hybrid. |
| 1.3.6.1.4.1.868.2.5.4.1.4.3.1.7 | ColumntnVlanConfigInterfaceAllowVlans2KTo3K | read-write | current | Third quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is hybrid. |
| 1.3.6.1.4.1.868.2.5.4.1.4.3.1.8 | ColumntnVlanConfigInterfaceAllowVlans3KTo4K | read-write | current | Last quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is hybrid. |
| 1.3.6.1.4.1.868.2.5.4.1.4.3.1.9 | ColumntnVlanConfigInterfaceForbiddenVlans0KTo1K | read-write | current | First quarter of bit-array indicating whether the port can ever become a member of a VLAN ('0') or not ('1'). Used in all modes. |
| 1.3.6.1.4.1.868.2.5.4.1.4.3.1.10 | ColumntnVlanConfigInterfaceForbiddenVlans1KTo2K | read-write | current | Second quarter of bit-array indicating whether the port can ever become a member of a VLAN ('0') or not ('1'). Used in all modes. |
| 1.3.6.1.4.1.868.2.5.4.1.4.3.1.11 | ColumntnVlanConfigInterfaceForbiddenVlans2KTo3K | read-write | current | Third quarter of bit-array indicating whether the port can ever become a member of a VLAN ('0') or not ('1'). Used in all modes. |
| 1.3.6.1.4.1.868.2.5.4.1.4.3.1.12 | ColumntnVlanConfigInterfaceForbiddenVlans3KTo4K | read-write | current | Last quarter of bit-array indicating whether the port can ever become a member of a VLAN ('0') or not ('1'). Used in all modes. |
| 1.3.6.1.4.1.868.2.5.4.1.5 | NodetnVlanServiceMgmt | |||
| 1.3.6.1.4.1.868.2.5.4.1.5.1 | ScalartnVlanServiceConnType | read-write | current | This defines the VLAN service type. The connection specified Port 1 and Port 2 configuration. customerProvider(1) : This sets the Port 1 to be customer facing … |
| 1.3.6.1.4.1.868.2.5.4.1.5.2 | ScalartnVlanServiceVIDForTag | read-write | current | This Vlan id will be used when the service translation requires an extra tag to be added. |
| 1.3.6.1.4.1.868.2.5.4.1.5.3 | ScalartnVlanServiceEtherTypeForTag | read-write | current | This Ethertype will be used when the service translation requires an extra tag to be added. Typical values are 0x8100 for IEEE 802.1Q tags, 0x88a8 for IEEE 802… |
| 1.3.6.1.4.1.868.2.5.4.1.5.4 | ScalartnVlanServiceTranslation | read-write | current | This determines the service or flow type between the two terminations. The translation type as the flow passes the termination points from Customer edge to pro… |
| 1.3.6.1.4.1.868.2.5.4.1.6 | NodetnVlanDbMgmt | |||
| 1.3.6.1.4.1.868.2.5.4.1.6.1 | TabletnVLANDbTable | not-accessible | current | This table contains all VLAN entries for this bridge. |
| 1.3.6.1.4.1.868.2.5.4.1.6.1.1 | RowtnVLANDbEntry | not-accessible | current | A entry in the table represents a VLAN and the interfaces that are members of that VLAN. |
| 1.3.6.1.4.1.868.2.5.4.1.6.1.1.1 | ColumntnVlanDbVID | read-only | current | The VLAN ID of the entry. |
| 1.3.6.1.4.1.868.2.5.4.1.6.1.1.2 | ColumntnVlanDbFID | read-only | current | The Forwarding Database number for this VLAN. |
| 1.3.6.1.4.1.868.2.5.4.1.6.1.1.3 | ColumntnVlanDbVIDPriOverride | read-create | current | Override Priority on frames assosicated with this VID. |
| 1.3.6.1.4.1.868.2.5.4.1.6.1.1.4 | ColumntnVlanDbVIDPriority | read-create | current | Priority for frames assosicated with this VID. |
| 1.3.6.1.4.1.868.2.5.4.1.6.1.1.5 | ColumntnVlanDbMemTagPort1 | read-create | current | Membership and Egress Tagging on Logical Port 1. memEgressNoMode(1)- Port 1 is a member of this VLAN and frames that egress are unmodified. memEgressNoTag(2) -… |
| 1.3.6.1.4.1.868.2.5.4.1.6.1.1.6 | ColumntnVlanDbMemTagPort2 | read-create | current | Membership and Egress Tagging on Logical Port 2. memEgressNoMode(1)- Port 2 is a member of this VLAN and frames that egress are unmodified. memEgressNoTag(2) -… |
| 1.3.6.1.4.1.868.2.5.4.1.6.1.1.7 | ColumntnVlanDbMemTagPort3 | read-create | current | Membership and Egress Tagging on Logical Port 3. memEgressNoMode(1)- Port 3 is a member of this VLAN and frames that egress are unmodified. memEgressNoTag(2) -… |
| 1.3.6.1.4.1.868.2.5.4.1.6.1.1.8 | ColumntnVlanDbMemTagPort4 | read-create | current | Membership and Egress Tagging on Logical Port 4. memEgressNoMode(1)- Port 4 is a member of this VLAN and frames that egress are unmodified. memEgressNoTag(2) -… |
| 1.3.6.1.4.1.868.2.5.4.1.6.1.1.9 | ColumntnVlanDbMemTagPort5 | read-create | current | Membership and Egress Tagging on Logical Port 5. memEgressNoMode(1)- Port 5 is a member of this VLAN and frames that egress are unmodified. memEgressNoTag(2) -… |
| 1.3.6.1.4.1.868.2.5.4.1.6.1.1.10 | ColumntnVlanDbMemTagPort6 | read-create | current | Membership and Egress Tagging on Logical Port 6. memEgressNoMode(1)- Port 6 is a member of this VLAN and frames that egress are unmodified. memEgressNoTag(2) -… |
| 1.3.6.1.4.1.868.2.5.4.1.6.1.1.11 | ColumntnVlanDbMemTagPort7 | read-create | current | Membership and Egress Tagging on Logical Port 7. memEgressNoMode(1)- Port 7 is a member of this VLAN and frames that egress are unmodified. memEgressNoTag(2) -… |
| 1.3.6.1.4.1.868.2.5.4.1.6.1.1.12 | ColumntnVlanDbMemTagPort8 | read-create | current | Membership and Egress Tagging on Logical Port 8. memEgressNoMode(1)- Port 8 is a member of this VLAN and frames that egress are unmodified. memEgressNoTag(2) -… |
| 1.3.6.1.4.1.868.2.5.4.1.6.1.1.13 | ColumntnVlanDbMemTagPort9 | read-create | current | Membership and Egress Tagging on Logical Port 9. memEgressNoMode(1)- Port 9 is a member of this VLAN and frames that egress are unmodified. memEgressNoTag(2) -… |
| 1.3.6.1.4.1.868.2.5.4.1.6.1.1.14 | ColumntnVlanDbMemTagPort10 | read-create | current | Membership and Egress Tagging on Logical Port 10. memEgressNoMode(1)- Port 10 is a member of this VLAN and frames that egress are unmodified. memEgressNoTag(2)… |
| 1.3.6.1.4.1.868.2.5.4.1.6.1.1.15 | ColumntnVlanDbRowStatus | read-create | current | The status of this VLAN entry in the VLAN database. |
| 1.3.6.1.4.1.868.2.5.4.1.6.2 | NodetnVLANDbFlush | |||
| 1.3.6.1.4.1.868.2.5.4.1.6.2.1 | ScalartnVLANDbFlushOperation | read-write | current | Set this viarable to: flushAll(2): flush all VLAN entries except default VLAN 1. This variable can't be set if the 'tnVLANDbFlushOperationStatus' is 'inProgres… |
| 1.3.6.1.4.1.868.2.5.4.1.6.2.2 | ScalartnVLANDbFlushOperationStatus | read-only | current | The VLAN database flush operation status. unknown(1): no flush operation has been performed. success(2)/failure(3): the last flush operation is finished, succe… |
| 1.3.6.1.4.1.868.2.5.4.1.6.2.3 | ScalartnVLANDbFlushOperationFailureReason | read-only | current | Specifies the description of the cause of 'failure(3)' state of the object 'tnVLANDbFlushOperationStatus'. This object would be a null string if value of 'tnVL… |
| 1.3.6.1.4.1.868.2.5.4.1.7 | NodetnFIDDbMgmt | |||
| 1.3.6.1.4.1.868.2.5.4.1.7.1 | TabletnFIDDbTable | not-accessible | current | The forwarding/filtering address database for this device. |
| 1.3.6.1.4.1.868.2.5.4.1.7.1.1 | RowtnFIDDbEntry | not-accessible | current | Information about a particular MAC address. |
| 1.3.6.1.4.1.868.2.5.4.1.7.1.1.2 | ColumntnFIDDbID | read-only | current | The Forwarding Database Number. This identifies the database. |
| 1.3.6.1.4.1.868.2.5.4.1.7.1.1.3 | ColumntnFIDDbMacAddress | read-only | current | The unicast or multicast MAC address that the device has forwarding information. |
| 1.3.6.1.4.1.868.2.5.4.1.7.1.1.4 | ColumntnFIDDbConnPort | read-create | current | The index of the logical Port from which the device received the 'tnFIDDbMacAddress'. |
| 1.3.6.1.4.1.868.2.5.4.1.7.1.1.5 | ColumntnFIDDbPriority | read-create | current | The priority of this MAC entry. |
| 1.3.6.1.4.1.868.2.5.4.1.7.1.1.6 | ColumntnFIDDbEntryType | read-create | current | The Entry state of this unicast or multicast entry. The types represent : static(1) - A Valid entry that doesnot age. staticNRL(2) - A static entry that has no… |
| 1.3.6.1.4.1.868.2.5.4.1.7.1.1.7 | ColumntnFIDDbEntryStatus | read-create | current | The status of this entry. |
| 1.3.6.1.4.1.868.2.5.4.1.7.2 | NodetnFIDDbFlush | |||
| 1.3.6.1.4.1.868.2.5.4.1.7.2.1 | ScalartnFIDDbFlushFID | read-write | current | When 'tnFIDDbFlushOperation' is 'flushAllFID(3)' or 'flushAllDynamicFID(4)', the value(1..4094) of this viarable is used to specify the FID to be flushed. The … |
| 1.3.6.1.4.1.868.2.5.4.1.7.2.2 | ScalartnFIDDbFlushOperation | read-write | current | Set this viarable to: flushAll(2): flush all FID entries for all FIDs. flushAllDynamic(3): flush all FID dynamic entries for all FIDs. flushAllFID(4): flush al… |
| 1.3.6.1.4.1.868.2.5.4.1.7.2.3 | ScalartnFIDDbFlushOperationStatus | read-only | current | The FID database flush operation status. unknown(1): no flush operation has been performed. success(2)/failure(3): the last flush operation is finished, succes… |
| 1.3.6.1.4.1.868.2.5.4.1.7.2.4 | ScalartnFIDDbFlushOperationFailureReason | read-only | current | Specifies the description of the cause of 'failure(3)' state of the object 'ionFIDDbFlushOperationStatus'. This object would be a null string if value of 'ionF… |
| 1.3.6.1.4.1.868.2.5.4.1.8 | NodetnVclMgmt | |||
| 1.3.6.1.4.1.868.2.5.4.1.8.1 | NodetnVclMacBasedMgmt | |||
| 1.3.6.1.4.1.868.2.5.4.1.8.1.1 | TabletnVclMacBasedTable | not-accessible | current | This table is used to control MAC based Vlan functions. |
| 1.3.6.1.4.1.868.2.5.4.1.8.1.1.1 | RowtnVclMacBasedEntry | not-accessible | current | A entry in the table is used to control MAC based Vlan functions. |
| 1.3.6.1.4.1.868.2.5.4.1.8.1.1.1.1 | ColumntnVclMacBasedMacAddr | not-accessible | current | The MAC address is used for the MAC based VLAN function classification key. |
| 1.3.6.1.4.1.868.2.5.4.1.8.1.1.1.2 | ColumntnVclMacBasedVlanId | read-create | current | The Vlan Id will be assigned to the incoming frame(if needed) which matches this specific MAC address and port member list. |
| 1.3.6.1.4.1.868.2.5.4.1.8.1.1.1.3 | ColumntnVclMacBasedPortMember | read-create | current | The member port list of this specific MAC based Vlan match process takes place. |
| 1.3.6.1.4.1.868.2.5.4.1.8.1.1.1.4 | ColumntnVclMacBasedUser | read-only | current | The creater of this entry. The MAC based VLAN entry is either created by user configuration(static), or by NAS dynamic creation(nas). |
| 1.3.6.1.4.1.868.2.5.4.1.8.1.1.1.5 | ColumntnVclMacBasedRowStatus | read-create | current | The status of this entry. |
| 1.3.6.1.4.1.868.2.5.4.1.8.2 | NodetnVclProtoBasedMgmt | |||
| 1.3.6.1.4.1.868.2.5.4.1.8.2.1 | TabletnVclProtoBasedGroupMapTable | not-accessible | current | This table is used to build a specific protocol group for VCL match process. |
| 1.3.6.1.4.1.868.2.5.4.1.8.2.1.1 | RowtnVclProtoBasedGroupMapEntry | not-accessible | current | A entry in this table is used to build a specific protocol group for VCL match process. |
| 1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.1 | ColumntnVclProtoBasedGroupMapName | not-accessible | current | The locally arbitrary, but unique identifier associated with this TnVclProtoBasedGroupMapEntry. |
| 1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.2 | ColumntnVclProtoBasedGroupMapProtocol | read-create | current | Frame Type can have one of the following values: 1. Ethernet 2. SNAP 3. LLC |
| 1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.3 | ColumntnVclProtoBasedGroupMapEtherTypeVal | read-create | current | Ethernet Type is valid only if the tnVclProtoBasedGroupMapProtocol is ethernet(1). Valid values for etype ranges is from 0x0600-0xffff. If tnVclProtoBasedGroup… |
| 1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.4 | ColumntnVclProtoBasedGroupMapSnapOui | read-create | current | SNAP OUI is valid only if the tnVclProtoBasedGroupMapProtocol is snap(2). OUI (Organizationally Unique Identifier) is value in format of xx-xx-xx where each pa… |
| 1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.5 | ColumntnVclProtoBasedGroupMapSnapPid | read-create | current | SNAP PID is valid only if the tnVclProtoBasedGroupMapProtocol is snap(2). If the OUI is hexadecimal 000000, the protocol ID is the Ethernet type (EtherType) fi… |
| 1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.6 | ColumntnVclProtoBasedGroupMapLlcDsap | read-create | current | LLC DSAP is valid only if the tnVclProtoBasedGroupMapProtocol is llc(3). DSAP: 1-byte long string (0x00-0xff). If tnVclProtoBasedGroupMapProtocol is not llc(3)… |
| 1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.7 | ColumntnVclProtoBasedGroupMapLlcSsap | read-create | current | LLC SSAP is valid only if the tnVclProtoBasedGroupMapProtocol is llc(3). SSAP: 1-byte long string (0x00-0xff). If tnVclProtoBasedGroupMapProtocol is not llc(3)… |
| 1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.8 | ColumntnVclProtoBasedGroupMapRowStatus | read-create | current | The status of this entry. |
| 1.3.6.1.4.1.868.2.5.4.1.8.2.2 | TabletnVclProtoBasedVlanMapTable | not-accessible | current | The table is used to associate the protocol based VLAN groups with VLAN paramaters. |
| 1.3.6.1.4.1.868.2.5.4.1.8.2.2.1 | RowtnVclProtoBasedVlanMapEntry | not-accessible | current | A entry in this table is used to associate the protocol based VLAN groups with VLAN paramaters. |
| 1.3.6.1.4.1.868.2.5.4.1.8.2.2.1.1 | ColumntnVclProtoBasedVlanMapVlanId | read-create | current | The Vlan Id will be assigned to the incoming frame(if needed) which matches this specific Protocol Group and port member list. |
| 1.3.6.1.4.1.868.2.5.4.1.8.2.2.1.2 | ColumntnVclProtoBasedVlanMapPortMember | read-create | current | The member port list of this specific Protocol based Vlan match process takes place. |
| 1.3.6.1.4.1.868.2.5.4.1.8.2.2.1.3 | ColumntnVclProtoBasedVlanMapRowStatus | read-create | current | The status of this entry. |
| 1.3.6.1.4.1.868.2.5.4.1.8.3 | NodetnVclIpSubnetBasedMgmt | |||
| 1.3.6.1.4.1.868.2.5.4.1.8.3.1 | TabletnVclIpSubnetBasedTable | not-accessible | current | This Table is used to control IP subnet based VLAN functions. |
| 1.3.6.1.4.1.868.2.5.4.1.8.3.1.1 | RowtnVclIpSubnetBasedEntry | not-accessible | current | A entry in this table is used to control IP subnet based VLAN functions. |
| 1.3.6.1.4.1.868.2.5.4.1.8.3.1.1.1 | ColumntnVclIpSubnetBasedVceId | not-accessible | current | Indicates the index of the entry. The valid range is implement specific. If VCE ID is 0, application will auto-generate the VCE ID for that entry. |
| 1.3.6.1.4.1.868.2.5.4.1.8.3.1.1.2 | ColumntnVclIpSubnetBasedIpAddr | read-create | current | Indicates the IP address for match process. |
| 1.3.6.1.4.1.868.2.5.4.1.8.3.1.1.3 | ColumntnVclIpSubnetBasedMaskLen | read-create | current | Indicates the network mask length. |
| 1.3.6.1.4.1.868.2.5.4.1.8.3.1.1.4 | ColumntnVclIpSubnetBasedVlanId | read-create | current | The Vlan Id will be assigned to the incoming frame(if needed) which matches this specific IP subnet and port member list. |
| 1.3.6.1.4.1.868.2.5.4.1.8.3.1.1.5 | ColumntnVclIpSubnetBasedPortMember | read-create | current | The member port list of this specific IP subnet based Vlan match process takes place. |
| 1.3.6.1.4.1.868.2.5.4.1.8.3.1.1.6 | ColumntnVclIpSubnetBasedRowStatus | read-create | current | The status of this entry. |
| 1.3.6.1.4.1.868.2.5.4.2 | NodetnVlanMQoSgmtConformance |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| TNVlanListQuarter | OCTET STRING (SIZE (128)) | current | A list representing 1024 VLAN IDs. The type should be interpreted as a sequence of bits, each bit representing one VLAN ID. If a bit is set (1) the represented VLAN is included in the VLAN list. If a bit is not set (0) … |
| TnVlanServiceTranslationType | INTEGER { noTranslation(1), untaggedUntagged(2), untaggedSingleTagged(3), singleTaggedSingleTagged(4), singleTaggedTranslation(5), singleTaggedDoubleTagged(6), doubleTaggedDoubleTagged(7), doubleTaggedTranslation(8), addProviderTag(9) } | current | T |