TPLINK-8021X-MIB
33 objects
Private MIB for 802.1x configuration.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| TPLINK-MIB | tplinkMgmt |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11863.6.31 | Identitytplink8021xMIB | Private MIB for 802.1x configuration. | ||
| 1.3.6.1.4.1.11863.6.31.1 | Nodetplink8021xMIBObjects | |||
| 1.3.6.1.4.1.11863.6.31.1.1 | Nodetp8021xGlobalConfig | |||
| 1.3.6.1.4.1.11863.6.31.1.1.1 | Scalartp8021xGlobalEnable | read-write | current | 0. disable 1. enable Enable/Disable the 802.1X function. |
| 1.3.6.1.4.1.11863.6.31.1.1.2 | Scalartp8021xAuthMode | read-write | current | Select the Authentication Method 0. pap: IEEE 802.1X authentication system uses extensible authentication protocol (EAP) to exchange information between the sw… |
| 1.3.6.1.4.1.11863.6.31.1.1.3 | Scalartp8021xHandshake | read-write | current | 0. disable 1. enable Enable/Disable the handshake feature. |
| 1.3.6.1.4.1.11863.6.31.1.1.4 | Scalartp8021xGuestVlanEnable | read-write | current | 0. disable 1. enable Enable/Disable the Guest VLAN feature. |
| 1.3.6.1.4.1.11863.6.31.1.1.5 | Scalartp8021xGuestVlanID | read-write | current | Enter your desired VLAN ID to enable the Guest VLAN feature. The supplicants in the Guest VLAN can access the specified network source. |
| 1.3.6.1.4.1.11863.6.31.1.1.6 | Scalartp8021xQuietEnable | read-write | current | 0. disable 1. enable Enable/Disable the Quiet timer. |
| 1.3.6.1.4.1.11863.6.31.1.1.7 | Scalartp8021xQuietPeriod | read-write | current | Specify a value for Quiet Period. Once the supplicant failed to the 802.1X Authentication, then the switch will not respond to the authentication request from … |
| 1.3.6.1.4.1.11863.6.31.1.1.8 | Scalartp8021xRetryTimes | read-write | current | Specify the maximum transfer times of the repeated authentication request.(1-9) |
| 1.3.6.1.4.1.11863.6.31.1.1.9 | Scalartp8021xSupplicantTimeOut | read-write | current | Specify the maximum time for the switch to wait for the response from supplicant before resending a request to the supplicant. (1-9 second) |
| 1.3.6.1.4.1.11863.6.31.1.1.10 | Scalartp8021xServerTimeOut | read-write | current | Specify the maximum time for the switch to wait for the response from authentication server before resending a request to the authentication server. (1-9 secon… |
| 1.3.6.1.4.1.11863.6.31.1.1.11 | Scalartp8021xAuthPrimaryIP | read-write | current | Enter the IP address of the authentication server. |
| 1.3.6.1.4.1.11863.6.31.1.1.12 | Scalartp8021xAuthSecondaryIP | read-write | current | Enter the IP address of the alternate authentication server. |
| 1.3.6.1.4.1.11863.6.31.1.1.13 | Scalartp8021xServerAuthPort | read-write | current | Set the UDP port of authentication server(s). The default port is 1812(1-65535) |
| 1.3.6.1.4.1.11863.6.31.1.1.14 | Scalartp8021xServerAuthKey | read-write | current | Set the shared password for the switch and the authentication servers to exchange messages.(0-31 characters). |
| 1.3.6.1.4.1.11863.6.31.1.1.15 | Scalartp8021xAcctEnable | read-write | current | 0. disable 1. enable Enable/Disable the accounting feature. |
| 1.3.6.1.4.1.11863.6.31.1.1.16 | Scalartp8021xAcctPrimaryIP | read-write | current | Enter the IP address of the accounting server. |
| 1.3.6.1.4.1.11863.6.31.1.1.17 | Scalartp8021xAcctSecondaryIP | read-write | current | Enter the IP address of the alternate accounting server. |
| 1.3.6.1.4.1.11863.6.31.1.1.18 | Scalartp8021xAcctPort | read-write | current | Set the UDP port of accounting server(s). The default port is 1813(1-65535) |
| 1.3.6.1.4.1.11863.6.31.1.1.19 | Scalartp8021xAcctKey | read-write | current | Set the shared password for the switch and the accounting servers to exchange messages. (0-31 characters). |
| 1.3.6.1.4.1.11863.6.31.1.2 | Nodetp8021xPortConfig | |||
| 1.3.6.1.4.1.11863.6.31.1.2.1 | Tabletp8021xPortConfigTable | not-accessible | current | A list of 8021x port config entries. |
| 1.3.6.1.4.1.11863.6.31.1.2.1.1 | Rowtp8021xPortConfigEntry | not-accessible | current | An entry contains of the information of 8021x port config. Here you can configure the ports for the 802.1X authentication. |
| 1.3.6.1.4.1.11863.6.31.1.2.1.1.1 | Columntp8021xPortConfigPortIndex | read-only | current | This object indicates the port number. |
| 1.3.6.1.4.1.11863.6.31.1.2.1.1.2 | Columntp8021xPortConfigEnable | read-write | current | 0. disable 1. enable Select Enable/Disable the 802.1X authentication feature for the port. |
| 1.3.6.1.4.1.11863.6.31.1.2.1.1.3 | Columntp8021xPortConfigGuestVlanEnable | read-write | current | 0. disable 1. enable Select Enable/Disable the Guest VLAN feature for the port. |
| 1.3.6.1.4.1.11863.6.31.1.2.1.1.4 | Columntp8021xPortConfigControlMode | read-write | current | Specify the Control Mode for the port. 0. force auth: In this mode, the port can work normally without passing the 802.1X Authentication. 1. force unauth: In t… |
| 1.3.6.1.4.1.11863.6.31.1.2.1.1.5 | Columntp8021xPortConfigControlType | read-write | current | Specify the Control Type for the port. 0. base of mac: Any client connected to the port should pass the 802.1X Authentication for access. 1. base of port: All … |
| 1.3.6.1.4.1.11863.6.31.1.2.1.1.6 | Columntp8021xPortConfigAuthState | read-only | current | The authentication status of the port. 0. unAuthorized 1. Authorized |
| 1.3.6.1.4.1.11863.6.31.1.2.1.1.7 | Columntp8021xPortConfigPortLag | read-only | current | the lag the port belong to |
| 1.3.6.1.4.1.11863.6.31.2 | Nodetplink8021xNotifications |