TPLINK-BANDWIDTH-MIB
27 objects
Private MIB for system time configuration.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| TPLINK-MIB | tplinkMgmt |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11863.6.23 | IdentitytplinkBandWidthMIB | Private MIB for system time configuration. | ||
| 1.3.6.1.4.1.11863.6.23.1 | NodetplinkBandWidthMIBObjects | |||
| 1.3.6.1.4.1.11863.6.23.1.1 | NodetpRateLimit | |||
| 1.3.6.1.4.1.11863.6.23.1.1.1 | TabletpRateLimitTable | not-accessible | current | A list of rate limit entries. Here you can configure the traffic rate on each port. |
| 1.3.6.1.4.1.11863.6.23.1.1.1.1 | RowtpRateLimitEntry | not-accessible | current | An entry contains of the information of rate limit. |
| 1.3.6.1.4.1.11863.6.23.1.1.1.1.1 | ColumntpRateLimitPort | read-only | current | The port number of the Switch. |
| 1.3.6.1.4.1.11863.6.23.1.1.1.1.2 | ColumntpRateLimitIngressRate | read-write | current | Set the bandwidth for receiving packets on the port. |
| 1.3.6.1.4.1.11863.6.23.1.1.1.1.3 | ColumntpRateLimitEgressRate | read-write | current | Set the bandwidth for sending packets on the port. |
| 1.3.6.1.4.1.11863.6.23.1.1.1.1.4 | ColumntpRateLimitPortLag | read-only | current | The LAG number which the port belongs to. |
| 1.3.6.1.4.1.11863.6.23.1.2 | NodetpStormControl | |||
| 1.3.6.1.4.1.11863.6.23.1.2.1 | TabletpStormControlTable | not-accessible | current | A list of storm control entries. Here you can configure the storm-control for forwarding packets. |
| 1.3.6.1.4.1.11863.6.23.1.2.1.1 | RowtpStormControlEntry | not-accessible | current | An entry contains of the information of storm control. |
| 1.3.6.1.4.1.11863.6.23.1.2.1.1.1 | ColumntpStormControlPort | read-only | current | The port number of the Switch. |
| 1.3.6.1.4.1.11863.6.23.1.2.1.1.2 | ColumntpStormControlMode | read-write | current | The storm control rate mode: kbps,ratio or pps. |
| 1.3.6.1.4.1.11863.6.23.1.2.1.1.3 | ColumntpStormControlBroadCastRate | read-write | current | Set the bandwidth for receiving broadcast packets on the port. The packet traffic exceeding the bandwidth will be discarded. kbps(0-1000000) ratio(0-100) pps(0… |
| 1.3.6.1.4.1.11863.6.23.1.2.1.1.4 | ColumntpStormControlMultiCastRate | read-write | current | Set the bandwidth for receiving multicast packets on the port. The packet traffic exceeding the bandwidth will be discarded. kbps(0-1000000) ratio(0-100) pps(0… |
| 1.3.6.1.4.1.11863.6.23.1.2.1.1.5 | ColumntpStormControlULRate | read-write | current | Set the bandwidth for receiving UL-Frame on the port. The packet traffic exceeding the bandwidth will be discarded. kbps(0-1000000) ratio(0-100) pps(0-1488000)… |
| 1.3.6.1.4.1.11863.6.23.1.2.1.1.6 | ColumntpStormControlAction | read-write | current | Set the exceed operation of the specified port: drop packets or shutdown. |
| 1.3.6.1.4.1.11863.6.23.1.2.1.1.7 | ColumntpStormControlRecoverTime | read-write | current | Set the auto recover time after a port is shut down. |
| 1.3.6.1.4.1.11863.6.23.1.2.1.1.8 | ColumntpStormControlPortLag | read-only | current | The LAG number which the port belongs to. |
| 1.3.6.1.4.1.11863.6.23.1.3 | NodetpStormControlRecover | |||
| 1.3.6.1.4.1.11863.6.23.1.3.1 | ScalartpStormControlRecoverPort | read-write | current | The port to be recovered. |
| 1.3.6.1.4.1.11863.6.23.2 | NodetplinkBandWidthNotifications | |||
| 1.3.6.1.4.1.11863.6.23.2.1 | NotificationtpBroadcastRateExceed | current | An broadcastRateExceed notification is sent when the value of broadcast stormControl rate set of port is exceeded. Note that if you need this notification, the… | |
| 1.3.6.1.4.1.11863.6.23.2.2 | NotificationtpMulticastRateExceed | current | An stormControl notification is sent when the value of multicast stormControl rate set of port is exceeded. Note that if you need this notification, the value … | |
| 1.3.6.1.4.1.11863.6.23.2.3 | NotificationtpIngressRateExceed | current | An ingressRateExceed notification is sent when the value of ingress rate set of port is exceeded. Note that if you need this notification, the value of ingress… | |
| 1.3.6.1.4.1.11863.6.23.2.4 | NotificationtpEgressRateExceed | current | An egressRateExceed notification is sent when the value of egress rate set of port is exceeded. Note that if you need this notification, the value of egress ra… |