TPLINK-DHCPRELAY-MIB
44 objects
Private MIB for DHCP Relay configuration.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE |
| TPLINK-MIB | tplinkMgmt |
| TPLINK-TC-MIB | TPRowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11863.6.39 | IdentitytplinkDhcpRelayMIB | Private MIB for DHCP Relay configuration. | ||
| 1.3.6.1.4.1.11863.6.39.1 | NodetplinkDhcpRelayMIBObjects | |||
| 1.3.6.1.4.1.11863.6.39.1.1 | NodedhcpRelayGlobalConfig | |||
| 1.3.6.1.4.1.11863.6.39.1.1.1 | ScalardhcpRelayEnableState | read-write | current | Enable or disable the switch as a DHCP relay. |
| 1.3.6.1.4.1.11863.6.39.1.1.2 | ScalardhcpRelayHops | read-write | current | Specify the maximum number of relay hops. Enter an entry between 1 and 16 to define the maximum number of router hops DHCP messages can be forwarded. The defau… |
| 1.3.6.1.4.1.11863.6.39.1.1.3 | ScalardhcpRelayTimeThreshold | read-write | current | Specify the maximum time limit for routing a DHCP packet. Enter an entry between 0 and 65535 seconds. The time field in the DHCP packet must be equal to or gre… |
| 1.3.6.1.4.1.11863.6.39.1.2 | NodedhcpRelayServerConfig | |||
| 1.3.6.1.4.1.11863.6.39.1.2.1 | TabledhcpRelayServerVlanInterfaceTable | not-accessible | current | The list of DHCP server of VLAN interface. |
| 1.3.6.1.4.1.11863.6.39.1.2.1.1 | RowdhcpRelayServerVlanInterfaceEntry | not-accessible | current | DHCP server entries. |
| 1.3.6.1.4.1.11863.6.39.1.2.1.1.1 | ColumndhcpRelayServerVlanId | read-only | current | VLAN interface ID. |
| 1.3.6.1.4.1.11863.6.39.1.2.1.1.2 | ColumndhcpRelayServerVlanInterfaceIp | read-only | current | DHCP Server IP address. |
| 1.3.6.1.4.1.11863.6.39.1.2.1.1.3 | ColumndhcpRelayServerVlanInterfaceStatus | read-create | current | The following values are states: these values may be used as follow: active(1),if the entry is being used. createAndGo(4),not being used. destroy(6),destory th… |
| 1.3.6.1.4.1.11863.6.39.1.2.3 | TabledhcpRelayServerRoutedPortInterfaceTable | not-accessible | current | The list of DHCP server of routed port interface. |
| 1.3.6.1.4.1.11863.6.39.1.2.3.1 | RowdhcpRelayServerRoutedPortInterfaceEntry | not-accessible | current | DHCP server entries. |
| 1.3.6.1.4.1.11863.6.39.1.2.3.1.1 | ColumndhcpRelayServerRoutedPortPortId | read-only | current | Displays the port ID. |
| 1.3.6.1.4.1.11863.6.39.1.2.3.1.2 | ColumndhcpRelayServerRoutedPortInterfaceIp | read-only | current | DHCP Server IP address. |
| 1.3.6.1.4.1.11863.6.39.1.2.3.1.3 | ColumndhcpRelayServerRoutedPortInterfaceStatus | read-create | current | The following values are states: these values may be used as follow: active(1),if the entry is being used. createAndGo(4),not being used. destroy(6),destory th… |
| 1.3.6.1.4.1.11863.6.39.1.2.4 | TabledhcpRelayServerPortChannelInterfaceTable | not-accessible | current | The list of DHCP server of port channel interface. |
| 1.3.6.1.4.1.11863.6.39.1.2.4.1 | RowdhcpRelayServerPortChannelInterfaceEntry | not-accessible | current | DHCP server entries. |
| 1.3.6.1.4.1.11863.6.39.1.2.4.1.1 | ColumndhcpRelayServerPortChannelPortId | read-only | current | Port channel interface ID. |
| 1.3.6.1.4.1.11863.6.39.1.2.4.1.2 | ColumndhcpRelayServerPortChannelInterfaceIp | read-only | current | DHCP Server IP address. |
| 1.3.6.1.4.1.11863.6.39.1.2.4.1.3 | ColumndhcpRelayServerPortChannelInterfaceStatus | read-create | current | The following values are states: these values may be used as follow: active(1),if the entry is being used. createAndGo(4),not being used. destroy(6),destory th… |
| 1.3.6.1.4.1.11863.6.39.1.3 | NodedhcpRelayVlanRelayServerConfig | |||
| 1.3.6.1.4.1.11863.6.39.1.3.1 | NodedhcpRelayVlanRelayDefaultRelayAgentInterface | |||
| 1.3.6.1.4.1.11863.6.39.1.3.1.1 | ScalardefaultRelayAgentInterface | read-write | current | Configure default relay agent interface. Configure interfaces follow format bellow, VLAN interface: VLAN+VLAN ID, such as VLAN1; loopback interface: lo+loopbac… |
| 1.3.6.1.4.1.11863.6.39.1.3.1.2 | ScalardefaultRelayAgentIp | read-only | current | The IP address of default relay agent Interface. |
| 1.3.6.1.4.1.11863.6.39.1.3.2 | TabledhcpRelayVlanRelayServerTable | not-accessible | current | The list of DHCP server of VLAN. |
| 1.3.6.1.4.1.11863.6.39.1.3.2.1 | RowdhcpRelayVlanRelayServerEntry | not-accessible | current | DHCP server entries. |
| 1.3.6.1.4.1.11863.6.39.1.3.2.1.1 | ColumndhcpRelayVlanRelayServerVlanId | read-only | current | VLAN ID. |
| 1.3.6.1.4.1.11863.6.39.1.3.2.1.2 | ColumndhcpRelayVlanRelayServerIp | read-only | current | DHCP Server IP address. |
| 1.3.6.1.4.1.11863.6.39.1.3.2.1.3 | ColumndhcpRelayVlanRelayServerRowStatus | read-create | current | The following values are states: these values may be used as follow: active(1),if the entry is being used. createAndGo(4),not being used. destroy(6),destory th… |
| 1.3.6.1.4.1.11863.6.39.1.4 | NodedhcpRelayOption82Config | |||
| 1.3.6.1.4.1.11863.6.39.1.4.1 | TabledhcpRelayOption82ConfigTable | not-accessible | current | A list of DHCP Relay option 82 config entries. Here you can configure the port parameters for the DHCP Relay option 82 feature. |
| 1.3.6.1.4.1.11863.6.39.1.4.1.1 | RowdhcpRelayOption82ConfigEntry | not-accessible | current | An entry contains of the information of DHCP Relay option 82 config. |
| 1.3.6.1.4.1.11863.6.39.1.4.1.1.1 | ColumndhcpRelayOption82ConfigPort | read-only | current | Port number |
| 1.3.6.1.4.1.11863.6.39.1.4.1.1.2 | ColumndhcpRelayOption82ConfigSupportStatus | read-write | current | 0. disable 1. enable Select Enable/Disable the port to support the Option 82 feature. |
| 1.3.6.1.4.1.11863.6.39.1.4.1.1.3 | ColumndhcpRelayOption82ConfigOperationStrategy | read-write | current | Select the operation for the Option 82 filed of the DHCP request packets from the Host. 0. keep: Indicates to keep the Option 82 field of the packets. 1. repla… |
| 1.3.6.1.4.1.11863.6.39.1.4.1.1.4 | ColumndhcpRelayOption82ConfigFormat | read-write | current | Select the format for the Option 82 sub-option value field. 0. normal: the format of sub-option value field is TLV(type-length-value). 1. replace: the format o… |
| 1.3.6.1.4.1.11863.6.39.1.4.1.1.5 | ColumndhcpRelayOption82ConfigCircuitCustomization | read-write | current | 0. disable 1. enable Enable/Disable the switch to define the Option 82 circuit id. |
| 1.3.6.1.4.1.11863.6.39.1.4.1.1.6 | ColumndhcpRelayOption82ConfigCircuitID | read-write | current | The sub-option Circuit ID for the customized Option 82.(0-64 characters) |
| 1.3.6.1.4.1.11863.6.39.1.4.1.1.7 | ColumndhcpRelayOption82ConfigRemoteCustomization | read-write | current | 0. disable 1. enable Enable/Disable the switch to define the Option 82 remote id. |
| 1.3.6.1.4.1.11863.6.39.1.4.1.1.8 | ColumndhcpRelayOption82ConfigRemoteID | read-write | current | The sub-option Remote ID for the customized Option 82.(0-64 characters) |
| 1.3.6.1.4.1.11863.6.39.1.4.1.1.9 | ColumndhcpRelayOption82ConfigLag | read-only | current | The LAG to which the port belongs to. |
| 1.3.6.1.4.1.11863.6.39.2 | NodetplinkDhcpRelayNotifications |