TPLINK-GVRP-MIB
15 objects
GVRP (GARP VLAN registration protocol) is an implementation of GARP (generic attribute registration protocol). GVRP allows the switch to automatically add or remove the VLANs via the dynamic VLAN registration information and propagate the local VLAN registration information to other switches, without having to individually configure each VLAN.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| TPLINK-MIB | tplinkMgmt |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11863.6.20 | IdentitytplinkGvrpMIB | GVRP (GARP VLAN registration protocol) is an implementation of GARP (generic attribute registration protocol). GVRP allows the switch to automatically add or r… | ||
| 1.3.6.1.4.1.11863.6.20.1 | NodetplinkGvrpMIBObjects | |||
| 1.3.6.1.4.1.11863.6.20.1.1 | NodetpGvrpGlobalConfig | |||
| 1.3.6.1.4.1.11863.6.20.1.1.1 | ScalartpGvrpGlobalEnable | read-write | current | Allows you to Enable/Disable the GVRP function. 0. disable 1. enable |
| 1.3.6.1.4.1.11863.6.20.1.2 | NodetpGvrpPortConfig | |||
| 1.3.6.1.4.1.11863.6.20.1.2.1 | TabletpGvrpPortTable | not-accessible | current | Here you can set the GVRP parameters for each port. |
| 1.3.6.1.4.1.11863.6.20.1.2.1.1 | RowtpGvrpPortEntry | not-accessible | current | An entry contains of the information of a port. |
| 1.3.6.1.4.1.11863.6.20.1.2.1.1.1 | ColumntpGvrpPortNumber | read-only | current | Displays the port number. |
| 1.3.6.1.4.1.11863.6.20.1.2.1.1.2 | ColumntpGvrpPortEnable | read-write | current | Enable/Disable the GVRP feature for the port. The port type should be set to TRUNK before enabling the GVRP feature. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.20.1.2.1.1.3 | ColumntpGvrpPortRegistration | read-write | current | Select the Registration Mode for the port. 0. NORMAL:In this mode, a port can dynamically register/deregister a VLAN and propagate the dynamic/static VLAN info… |
| 1.3.6.1.4.1.11863.6.20.1.2.1.1.4 | ColumntpGvrpLeaveAllTimer | read-write | current | Once the LeaveAll Timer is set, the port with GVRP enabled can send a LeaveAll message after the timer times out, so that other GARP ports can re-register all … |
| 1.3.6.1.4.1.11863.6.20.1.2.1.1.5 | ColumntpGvrpJoinTimer | read-write | current | To guarantee the transmission of the Join messages, a GARP port sends each Join message two times. The Join Timer is used to define the interval between the tw… |
| 1.3.6.1.4.1.11863.6.20.1.2.1.1.6 | ColumntpGvrpLeaveTimer | read-write | current | Once the Leave Timer is set, the GARP port receiving a Leave message will start its Leave timer, and unregister the attribute information if it does not receiv… |
| 1.3.6.1.4.1.11863.6.20.1.2.1.1.7 | ColumntpGvrpPortLag | read-only | current | Displays the LAG to which the port belongs. |
| 1.3.6.1.4.1.11863.6.20.2 | NodetplinkGvrpNotifications |