TPLINK-IGMPSNOOPING-MIB
85 objects
Private MIB for igmpSnooping manage.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE |
| TPLINK-MIB | tplinkMgmt |
| TPLINK-TC-MIB | TPRowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11863.6.25 | IdentitytplinkIgmpSnoopingMIB | Private MIB for igmpSnooping manage. | ||
| 1.3.6.1.4.1.11863.6.25.1 | NodetplinkIgmpSnoopingMIBObjects | |||
| 1.3.6.1.4.1.11863.6.25.1.1 | NodetpIgmpSnooping | |||
| 1.3.6.1.4.1.11863.6.25.1.1.1 | NodetpIgmpSnoopingGlobalConfig | |||
| 1.3.6.1.4.1.11863.6.25.1.1.1.1 | ScalartpIgmpSnoopingEnable | read-write | current | Select Enable/Disable IGMP Snooping function globally on the Switch. 0. disable 1. enable |
| 1.3.6.1.4.1.11863.6.25.1.1.1.2 | ScalartpUnknownMulticastPacket | read-write | current | Select the operation for the switch to process unknown multicast. 0. forward 1. discard |
| 1.3.6.1.4.1.11863.6.25.1.1.1.3 | ScalartpUnknownReportSuppression | read-write | current | Select Enable/Disable IGMP Snooping report suppression function globally on the Switch. 0. disable 1. enable |
| 1.3.6.1.4.1.11863.6.25.1.1.1.4 | ScalartpIgmpGlobalRouterTime | read-create | current | Specify the aging time of the router port. Within this time, if the switch don't receive IGMP query message from the router port, it will consider this port is… |
| 1.3.6.1.4.1.11863.6.25.1.1.1.5 | ScalartpIgmpGlobalMemberTime | read-create | current | Specify the aging time of the member port. Within this time, if the switch don't receive IGMP report message from the member port, it will consider this port i… |
| 1.3.6.1.4.1.11863.6.25.1.1.1.6 | ScalartpIgmplastListenerQueryInterval | read-create | current | Enter the Last Listener Query interval time. When the multicast group has no more member ports, it will send the Specific Query Message with this interval time… |
| 1.3.6.1.4.1.11863.6.25.1.1.1.7 | ScalartpIgmplastListenerQueryCount | read-create | current | Enter the Last Listener Query numbers. When the multicast group has no more member ports, it will send this numbers of Specific Query Message to check whether … |
| 1.3.6.1.4.1.11863.6.25.1.1.2 | NodetpIgmpPortConfig | |||
| 1.3.6.1.4.1.11863.6.25.1.1.2.1 | TabletpIgmpPortTable | not-accessible | current | IGMP Snooping (Internet Group Management Protocol Snooping) is a multicast control mechanism running on Layer 2 switch. It can effectively prevent multicast gr… |
| 1.3.6.1.4.1.11863.6.25.1.1.2.1.1 | RowtpIgmpPortEntry | not-accessible | current | An entry contains of the information of port configure. |
| 1.3.6.1.4.1.11863.6.25.1.1.2.1.1.2 | ColumntpIgmpSnoopingPortEnable | read-write | current | Select Enable/Disable IGMP Snooping for the desired port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.25.1.1.2.1.1.3 | ColumntpIgmpFastLeavePortEnable | read-write | current | Select Enable/Disable Fast Leave feature for the desired port. If Fast Leave is enabled for a port, the Switch will immediately remove this port from the multi… |
| 1.3.6.1.4.1.11863.6.25.1.1.2.1.1.4 | ColumntpIgmpPortLag | read-only | current | Displays the LAG number which the port belongs to. |
| 1.3.6.1.4.1.11863.6.25.1.1.3 | NodetpIgmpVlanConfig | |||
| 1.3.6.1.4.1.11863.6.25.1.1.3.1 | TabletpIgmpVlanTable | not-accessible | current | Multicast groups established by IGMP Snooping are based on VLANs. You can configure different IGMP parameters for different VLANs. |
| 1.3.6.1.4.1.11863.6.25.1.1.3.1.1 | RowtpIgmpVlanEntry | not-accessible | current | An entry contains of the information of igmpsnooping. |
| 1.3.6.1.4.1.11863.6.25.1.1.3.1.1.1 | ColumntpIgmpVlanId | read-only | current | Enter the VLAN ID to enable IGMP Snooping for the desired VLAN,1-4094. |
| 1.3.6.1.4.1.11863.6.25.1.1.3.1.1.2 | ColumntpIgmpRouterTime | read-create | current | Specify the aging time of the router port. Within this time, if the switch don't receive IGMP query message from the router port, it will consider this port is… |
| 1.3.6.1.4.1.11863.6.25.1.1.3.1.1.3 | ColumntpIgmpMemberTime | read-create | current | Specify the aging time of the member port. Within this time, if the switch don't receive IGMP report message from the member port, it will consider this port i… |
| 1.3.6.1.4.1.11863.6.25.1.1.3.1.1.4 | ColumntpIgmpRouterPort | read-create | current | Config the static router ports which are mainly used in the network with stable topology. |
| 1.3.6.1.4.1.11863.6.25.1.1.3.1.1.5 | ColumntpIgmpForbiddenRouterPort | read-create | current | Config the forbidden router ports which are mainly used to forbidden specified ports to become router ports. |
| 1.3.6.1.4.1.11863.6.25.1.1.3.1.1.6 | ColumntpIgmpVlanStatus | read-create | current | the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, bu… |
| 1.3.6.1.4.1.11863.6.25.1.1.4 | NodetpIgmpMultiVlanConfig | |||
| 1.3.6.1.4.1.11863.6.25.1.1.4.1 | ScalartpIgmpMultiVlanId | read-write | current | Enter the VLAN ID of the multicast VLAN,2-4094.If enter 0, multicast VLAN is disabled. |
| 1.3.6.1.4.1.11863.6.25.1.1.4.2 | ScalartpIgmpMultitRouterTime | read-write | current | Specify the aging time of the router port. Within this time, if the switch don't receive IGMP query message from the router port, it will consider this port is… |
| 1.3.6.1.4.1.11863.6.25.1.1.4.3 | ScalartpIgmpMultiMemberTime | read-write | current | Specify the aging time of the member port. Within this time, if the switch don't receive IGMP report message from the member port, it will consider this port i… |
| 1.3.6.1.4.1.11863.6.25.1.1.4.4 | ScalartpIgmpMultiRouterPort | read-write | current | Config the static router ports which are mainly used in the network with stable topology. |
| 1.3.6.1.4.1.11863.6.25.1.1.4.5 | ScalartpIgmpMultiForbiddenRouterPort | read-write | current | Config the forbidden router ports which are mainly used to forbidden specified ports to become router ports. |
| 1.3.6.1.4.1.11863.6.25.1.1.4.6 | ScalartpIgmpMultiReplaceSrcIp | read-create | current | config the source ip which will replace the source ip of IGMP report in multicast vlan. |
| 1.3.6.1.4.1.11863.6.25.1.1.5 | NodetpIgmpQuerierConfig | |||
| 1.3.6.1.4.1.11863.6.25.1.1.5.1 | TableigmpQuerierTable | not-accessible | current | IGMP Snooping Querier is based on VLAN. You can configure different IGMP Snooping Querier parameters for different VLANs. |
| 1.3.6.1.4.1.11863.6.25.1.1.5.1.1 | RowigmpQuerierEntry | not-accessible | current | An entry contains of the information of IGMP Snooping Querier. |
| 1.3.6.1.4.1.11863.6.25.1.1.5.1.1.1 | ColumnigmpQuerierVlanId | read-only | current | Enter the VLAN ID to enable IGMP Snooping Querier for the desired VLAN, ranging from 1 to 4094. |
| 1.3.6.1.4.1.11863.6.25.1.1.5.1.1.2 | ColumnqueryInterval | read-create | current | Enter the Query message interval time. The Querier will send General Query Message with this interval. The interval is ranging from 10 to 300 seconds. |
| 1.3.6.1.4.1.11863.6.25.1.1.5.1.1.3 | ColumnmaxResponseTime | read-create | current | Enter the value of Maximum Response Time field of the Query message. The host is expected to response to an IGMP general query within this time. The time is ra… |
| 1.3.6.1.4.1.11863.6.25.1.1.5.1.1.4 | ColumngeneralQuerySrcIp | read-create | current | Enter the General Query Message source IP address. |
| 1.3.6.1.4.1.11863.6.25.1.1.5.1.1.5 | ColumnigmpQuerierStatus | read-create | current | The following values are states: these values may be used as follow: active(1),if the entry is being used. createAndGo(4),not being used. destroy(6),destory th… |
| 1.3.6.1.4.1.11863.6.25.1.2 | NodetpIgmpFilter | |||
| 1.3.6.1.4.1.11863.6.25.1.2.1 | NodetpIgmpPortFilterConfig | |||
| 1.3.6.1.4.1.11863.6.25.1.2.1.1 | TabletpIgmpFilterPortTable | not-accessible | current | When the switch receives IGMP report message, it examines the multicast filtering IP ID configured on the access port to determine if the port can join the mul… |
| 1.3.6.1.4.1.11863.6.25.1.2.1.1.1 | RowtpIgmpFilterPortEntry | not-accessible | current | An entry contains of the information of a port param. |
| 1.3.6.1.4.1.11863.6.25.1.2.1.1.1.2 | ColumntpIgmpFilterMaxGroup | read-write | current | Specify the maximum number of multicast groups to prevent some ports taking up too much bandwidth. |
| 1.3.6.1.4.1.11863.6.25.1.2.1.1.1.3 | ColumntpIgmpFilterMaxGroupAction | read-write | current | The policy should be taken when the number of multicast group a port has joined reach the maximum. 0.Drop: drop the successive report packet, and this port can… |
| 1.3.6.1.4.1.11863.6.25.1.2.1.1.1.4 | ColumntpIgmpFilterBindAddrId | read-write | current | Enter the profile ID the port will be bound to. Only one profile can be bound to each port. |
| 1.3.6.1.4.1.11863.6.25.1.2.1.1.1.5 | ColumntpIgmpFilterPortLag | read-only | current | Displays the LAG number which the port belongs to. |
| 1.3.6.1.4.1.11863.6.25.1.3 | NodetpIgmpAuth | |||
| 1.3.6.1.4.1.11863.6.25.1.3.1 | NodetpIgmpPortAuthConfig | |||
| 1.3.6.1.4.1.11863.6.25.1.3.1.1 | TabletpIgmpAuthPortTable | not-accessible | current | IGMP Authentication can control the access of multicast packets. |
| 1.3.6.1.4.1.11863.6.25.1.3.1.1.1 | RowtpIgmpAuthPortEntry | not-accessible | current | An entry contains of the information of port authentication configure. |
| 1.3.6.1.4.1.11863.6.25.1.3.1.1.1.2 | ColumntpIgmpAuthEnable | read-write | current | Select Enable/Disable IGMP Authentication for the desired port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.25.1.3.1.1.1.3 | ColumntpIgmpAuthPortLag | read-only | current | Displays the LAG number which the port belongs to. |
| 1.3.6.1.4.1.11863.6.25.1.3.2 | NodetpIgmpGlobalAuthAccountConfig | |||
| 1.3.6.1.4.1.11863.6.25.1.3.2.1 | ScalartpIgmpGlobalAuthAccountConfigEable | read-write | current | 0. disable 1. enable Enable/Disable the IGMP Authentication Accounting. |
| 1.3.6.1.4.1.11863.6.25.1.4 | NodetpIgmpPacketStatistic | |||
| 1.3.6.1.4.1.11863.6.25.1.4.1 | NodetpIgmpPktStat | |||
| 1.3.6.1.4.1.11863.6.25.1.4.1.1 | TabletpIgmpPktStatTable | not-accessible | current | A list of multicast statistic Table. |
| 1.3.6.1.4.1.11863.6.25.1.4.1.1.1 | RowtpIgmpPktStatEntry | not-accessible | current | An entry contains of multicast packet statistics over each port. |
| 1.3.6.1.4.1.11863.6.25.1.4.1.1.1.2 | ColumntpIgmpQueryPktStat | read-only | current | Displays the number of query packets the port received. |
| 1.3.6.1.4.1.11863.6.25.1.4.1.1.1.3 | ColumntpIgmpReportV1PktStat | read-only | current | Displays the number of IGMPv1 report packets the port received. |
| 1.3.6.1.4.1.11863.6.25.1.4.1.1.1.4 | ColumntpIgmpReportV2PktStat | read-only | current | Displays the number of IGMPv2 report packets the port received. |
| 1.3.6.1.4.1.11863.6.25.1.4.1.1.1.5 | ColumntpIgmpReportV3PktStat | read-only | current | Displays the number of IGMPv3 report packets the port received. |
| 1.3.6.1.4.1.11863.6.25.1.4.1.1.1.6 | ColumntpIgmpLeavePktStat | read-only | current | Displays the number of leave packets the port received. |
| 1.3.6.1.4.1.11863.6.25.1.4.1.1.1.7 | ColumntpIgmpErrorPktStat | read-only | current | Displays the number of error packets the port received. |
| 1.3.6.1.4.1.11863.6.25.1.4.1.2 | ScalartpIpIgmpPktStatClear | read-write | current | igmp packet statistic clear. |
| 1.3.6.1.4.1.11863.6.25.1.5 | NodetpIgmpMultigroup | |||
| 1.3.6.1.4.1.11863.6.25.1.5.1 | NodetpIgmpMulticastGroups | |||
| 1.3.6.1.4.1.11863.6.25.1.5.1.1 | TabletpIgmpMulticastGroupTable | not-accessible | current | A list of multicast groups Table. |
| 1.3.6.1.4.1.11863.6.25.1.5.1.1.1 | RowtpIgmpMulticastGroupEntry | not-accessible | current | An entry contains of multicast packet statistics over each port. |
| 1.3.6.1.4.1.11863.6.25.1.5.1.1.1.1 | ColumntpIgmpMulticastIP | read-only | current | Displays the multicast IP address. |
| 1.3.6.1.4.1.11863.6.25.1.5.1.1.1.2 | ColumntpIgmpVlanID | read-only | current | Displays the VLAN ID. |
| 1.3.6.1.4.1.11863.6.25.1.5.1.1.1.3 | ColumntpIgmpForwardPorts | read-only | current | Displays the forward ports of multicast group. |
| 1.3.6.1.4.1.11863.6.25.1.5.1.1.1.4 | ColumntpIgmpGrouptype | read-only | current | Displays the type of multicast group. |
| 1.3.6.1.4.1.11863.6.25.1.6 | NodetpIgmpStaticMultigroup | |||
| 1.3.6.1.4.1.11863.6.25.1.6.1 | NodetpIgmpMulticastStaticGroups | |||
| 1.3.6.1.4.1.11863.6.25.1.6.1.1 | TabletpIgmpMulticastStaticGroupTable | not-accessible | current | A list of multicast groups Table. |
| 1.3.6.1.4.1.11863.6.25.1.6.1.1.1 | RowtpIgmpMulticastStaticGroupEntry | not-accessible | current | An entry contains of multicast packet statistics over each port. |
| 1.3.6.1.4.1.11863.6.25.1.6.1.1.1.1 | ColumntpIgmpStaticMulticastIP | read-only | current | The multicast IP address. |
| 1.3.6.1.4.1.11863.6.25.1.6.1.1.1.2 | ColumntpIgmpStaticVlanID | read-only | current | The VLAN ID. |
| 1.3.6.1.4.1.11863.6.25.1.6.1.1.1.3 | ColumntpIgmpStaticForwardPorts | read-create | current | The forward ports of multicast group. |
| 1.3.6.1.4.1.11863.6.25.1.6.1.1.1.4 | ColumntpIgmpStaticGroupStatus | read-create | current | The following values are states: these values may be used as follow: active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),desto… |
| 1.3.6.1.4.1.11863.6.25.2 | NodetplinkIgmpSnoopingNotifications |