TPLINK-IPADDR-MIB
43 objects
Private MIB for ip address configuration.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11863.6.6 | IdentitytplinkIpAddrMIB | Private MIB for ip address configuration. | ||
| 1.3.6.1.4.1.11863.6.6.1 | NodetplinkIpAddrMIBObjects | |||
| 1.3.6.1.4.1.11863.6.6.1.1 | NodetpInterfaceConfig | |||
| 1.3.6.1.4.1.11863.6.6.1.1.1 | TabletpVlanInterfaceTable | not-accessible | current | A list of VLAN interface entries. VLAN interface is a virtual interface which is working in the level 3, it is used to communicate between the VLAN in the leve… |
| 1.3.6.1.4.1.11863.6.6.1.1.1.1 | RowtpVlanInterfaceConfigEntry | not-accessible | current | The interface can be added or removed . |
| 1.3.6.1.4.1.11863.6.6.1.1.1.1.1 | ColumntpVlanInterfaceVlanId | read-only | current | The id of the VLAN interface,and it must be in the 802.1Q VLAN of the ingress port. |
| 1.3.6.1.4.1.11863.6.6.1.1.1.1.2 | ColumntpVlanInterfaceSecondary | read-only | current | If the ip address is secondary IP. |
| 1.3.6.1.4.1.11863.6.6.1.1.1.1.3 | ColumntpVlanInterfaceMode | read-create | current | The IP address alloc-mode of VLAN interface. |
| 1.3.6.1.4.1.11863.6.6.1.1.1.1.4 | ColumntpVlanInterfaceIp | read-only | current | The IP address of the VLAN interface. |
| 1.3.6.1.4.1.11863.6.6.1.1.1.1.5 | ColumntpVlanInterfaceMsk | read-create | current | The IP mask of the VLAN interface. |
| 1.3.6.1.4.1.11863.6.6.1.1.1.1.6 | ColumntpVlanInterfaceName | read-create | current | The name of the VLAN interface. |
| 1.3.6.1.4.1.11863.6.6.1.1.1.1.7 | ColumntpVlanInterfaceStatus | read-create | current | The following values are states: these values may be used as follow: active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),desto… |
| 1.3.6.1.4.1.11863.6.6.1.1.2 | TabletpLoopbackInterfaceTable | not-accessible | current | A list of Loopback interface entries. Loopback interface is a virtual interface which purely software implemented, commonly used as router-id or network test. |
| 1.3.6.1.4.1.11863.6.6.1.1.2.1 | RowtpLoopbackInterfaceConfigEntry | not-accessible | current | The interface can be added or removed . |
| 1.3.6.1.4.1.11863.6.6.1.1.2.1.1 | ColumntpLoopbackInterfaceId | read-only | current | The id of the loopback interface (1-2147483647). |
| 1.3.6.1.4.1.11863.6.6.1.1.2.1.2 | ColumntpLoopbackInterfaceSecondary | read-only | current | If the ip address is secondary IP. |
| 1.3.6.1.4.1.11863.6.6.1.1.2.1.3 | ColumntpLoopbackInterfaceMode | read-create | current | The IP address alloc-mode of loopback interface. |
| 1.3.6.1.4.1.11863.6.6.1.1.2.1.4 | ColumntpLoopbackInterfaceIp | read-only | current | The IP address of the loopback interface. |
| 1.3.6.1.4.1.11863.6.6.1.1.2.1.5 | ColumntpLoopbackInterfaceMsk | read-create | current | The IP mask of the loopback interface. |
| 1.3.6.1.4.1.11863.6.6.1.1.2.1.6 | ColumntpLoopbackInterfaceName | read-create | current | The name of the loopback interface. |
| 1.3.6.1.4.1.11863.6.6.1.1.2.1.7 | ColumntpLoopbackInterfaceStatus | read-create | current | Action status. |
| 1.3.6.1.4.1.11863.6.6.1.1.3 | TabletpRoutedPortTable | not-accessible | current | A list of routed port. A routed port is special port mode which you can configure Layer 3 function like RIP, OSPF, while some Layer 2 function like speed, flow… |
| 1.3.6.1.4.1.11863.6.6.1.1.3.1 | RowtpRoutedPortConfigEntry | not-accessible | current | The interface can be added or removed . |
| 1.3.6.1.4.1.11863.6.6.1.1.3.1.1 | ColumntpRoutedPortId | read-only | current | The port id. |
| 1.3.6.1.4.1.11863.6.6.1.1.3.1.2 | ColumntpRoutedPortSecondary | read-only | current | If the ip address is secondary IP. |
| 1.3.6.1.4.1.11863.6.6.1.1.3.1.3 | ColumntpRoutedPortMode | read-create | current | The IP address alloc-mode of the routed port. |
| 1.3.6.1.4.1.11863.6.6.1.1.3.1.4 | ColumntpRoutedPortIp | read-only | current | The IP address of the routed port. |
| 1.3.6.1.4.1.11863.6.6.1.1.3.1.5 | ColumntpRoutedPortMsk | read-create | current | The IP mask of the routed port. |
| 1.3.6.1.4.1.11863.6.6.1.1.3.1.6 | ColumntpRoutedPortName | read-create | current | The name of the routed port. |
| 1.3.6.1.4.1.11863.6.6.1.1.3.1.7 | ColumntpRoutedPortStatus | read-create | current | Action status. |
| 1.3.6.1.4.1.11863.6.6.1.1.4 | TabletpPortChannelTable | not-accessible | current | A list of port-channel interface entries. |
| 1.3.6.1.4.1.11863.6.6.1.1.4.1 | RowtpPortChannelConfigEntry | not-accessible | current | The interface can be added or removed . |
| 1.3.6.1.4.1.11863.6.6.1.1.4.1.1 | ColumntpPortChannelId | read-only | current | The id of the port-channel interface. |
| 1.3.6.1.4.1.11863.6.6.1.1.4.1.2 | ColumntpPortChannelSecondary | read-only | current | If the ip address is secondary IP. |
| 1.3.6.1.4.1.11863.6.6.1.1.4.1.3 | ColumntpPortChannelMode | read-create | current | The IP address alloc-mode of port-channel interface. |
| 1.3.6.1.4.1.11863.6.6.1.1.4.1.4 | ColumntpPortChannelIp | read-only | current | The IP address of the port-channel interface. |
| 1.3.6.1.4.1.11863.6.6.1.1.4.1.5 | ColumntpPortChannelMsk | read-create | current | The IP mask of the port-channel interface. |
| 1.3.6.1.4.1.11863.6.6.1.1.4.1.6 | ColumntpPortChannelName | read-create | current | The name of the port-channel interface. |
| 1.3.6.1.4.1.11863.6.6.1.1.4.1.7 | ColumntpPortChannelStatus | read-create | current | The following values are states: these values may be used as follow: active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),desto… |
| 1.3.6.1.4.1.11863.6.6.2 | NodetplinkIpAddrNotifications |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| TpInterfaceMode | INTEGER{ none(0), manual(1), dhcp(2), bootp(3) } | current | Ip address alloc-mode: -'none(0)', which indicate vlan interface has no ip address. -'manual(1)',vlan interface's ip address is manually assigned. -'dhcp(2)',vlan interface's ip address is allocated by DHCP protocol. -'… |
| TpInterfaceMode2 | INTEGER{ none(0), manual(1) } | current | Ip address alloc-mode: -'none(0)', which indicate vlan interface has no ip address. -'manual(1)',vlan interface's ip address is manually assigned. |
| TpPortLinkMode | INTEGER { bridge(0), route(1) } | current | Port link-mode: bridge(0) or route(1) |