TPLINK-IPV6ADDR-MIB
24 objects
Private MIB for IPv6 address configuration.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | IpAddress OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus |
| TPLINK-MIB | tplinkMgmt |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11863.6.50 | IdentitytplinkIpv6AddrMIB | Private MIB for IPv6 address configuration. | ||
| 1.3.6.1.4.1.11863.6.50.1 | NodetplinkIpv6AddrMIBObjects | |||
| 1.3.6.1.4.1.11863.6.50.1.1 | Tableipv6ParaConfigAddrTable | not-accessible | current | The table of address information is relevant to the switch's IPv6 addresses. |
| 1.3.6.1.4.1.11863.6.50.1.1.1 | Rowipv6ParaConfigAddrEntry | not-accessible | current | Define the IPv6 address information. |
| 1.3.6.1.4.1.11863.6.50.1.1.1.1 | Columnipv6ParaConfigIfIndex | read-only | current | The IfIndex of the interface |
| 1.3.6.1.4.1.11863.6.50.1.1.1.2 | Columnipv6ParaConfigIfDescription | read-only | current | The description of the interface. |
| 1.3.6.1.4.1.11863.6.50.1.1.1.3 | Columnipv6ParaConfigAddrType | read-only | current | The IP address type of the switch. The value must be ipv6. |
| 1.3.6.1.4.1.11863.6.50.1.1.1.4 | Columnipv6ParaConfigAddress | read-only | current | The IPv6 address of the switch. |
| 1.3.6.1.4.1.11863.6.50.1.1.1.5 | Columnipv6ParaConfigPrefixLength | read-create | current | The length of the prefix (in bits) associated with the IPv6 address of the switch. |
| 1.3.6.1.4.1.11863.6.50.1.1.1.6 | Columnipv6ParaConfigSourceType | read-only | current | Indicate the type of source of IPv6 address. The value can be one of following: 'assignedIp': Assigned global/site-local IPv6 address; 'assignedEUI64Ip': Assig… |
| 1.3.6.1.4.1.11863.6.50.1.1.1.7 | Columnipv6ParaConfigRowStatus | read-create | current | the following values are states: these values may be used as follow: active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),desto… |
| 1.3.6.1.4.1.11863.6.50.1.2 | Tableipv6ParaConfigCfgTable | not-accessible | current | The table of configuration information is relevant to the switch's IPv6 addresses. |
| 1.3.6.1.4.1.11863.6.50.1.2.1 | Rowipv6ParaConfigCfgEntry | not-accessible | current | Define the IPv6 address information. |
| 1.3.6.1.4.1.11863.6.50.1.2.1.1 | Columnipv6ParaConfigCfgIfIndex | read-only | current | The IfIndex of the interface |
| 1.3.6.1.4.1.11863.6.50.1.2.1.2 | Columnipv6ParaConfigCfgIfDescription | read-only | current | The description of the interface. |
| 1.3.6.1.4.1.11863.6.50.1.2.1.3 | Columnipv6ParaConfigAutoLinkLocalEnable | read-write | current | 0. disable 1. enable Enable/Disable IPv6 link-local address auto configuration mode. |
| 1.3.6.1.4.1.11863.6.50.1.2.1.4 | Columnipv6ParaConfigDhcpEnable | read-write | current | 0. disable 1. enable Enable/Disable IPv6 global address auto configuration via DHCPv6 Server. |
| 1.3.6.1.4.1.11863.6.50.1.2.1.5 | Columnipv6ParaConfigNegotiateEnable | read-write | current | 0. disable 1. enable Enable/Disable IPv6 global address auto configuration via RA message. |
| 1.3.6.1.4.1.11863.6.50.1.2.1.6 | Columnipv6ParaConfigIPv6Enable | read-write | current | 0. disable 1. enable Enable/Disable IPv6 function on the interface of switch. |
| 1.3.6.1.4.1.11863.6.50.1.3 | Nodeipv6GatewayConfig | |||
| 1.3.6.1.4.1.11863.6.50.1.3.1 | Scalaripv6Gateway | read-write | current | The gateway of the ipv6 interface. Set '0' to delete the gateway. |
| 1.3.6.1.4.1.11863.6.50.2 | NodetplinkIpv6RoutingConfig | |||
| 1.3.6.1.4.1.11863.6.50.2.1 | ScalartpIpv6Routing | read-write | current | 0. disable 1. enable |
| 1.3.6.1.4.1.11863.6.50.3 | NodetplinkIpv6AddrNotifications |