TPLINK-LLDPCONFIG-MIB
28 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-SMI | IpAddress OBJECT-TYPE |
| TPLINK-LLDP-MIB | tplinkLldpMIBObjects |
| TPLINK-TC-MIB | TPRowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11863.6.35.1.1 | NodelldpConfig | |||
| 1.3.6.1.4.1.11863.6.35.1.1.1 | NodelldpGlobalConfig | |||
| 1.3.6.1.4.1.11863.6.35.1.1.1.1 | ScalarlldpGlobalConfigEnable | read-write | current | Select Enable/Disable LLDP function globally on the Switch. 0. disable 1. enable |
| 1.3.6.1.4.1.11863.6.35.1.1.1.2 | ScalarlldpGlobalConfigForwardMessageEnable | read-write | current | Enable/Disable LLDP message forwarding when LLDP Global state is Disable 0. disable 1. enable |
| 1.3.6.1.4.1.11863.6.35.1.1.1.3 | ScalarlldpGlobalConfigTxInterval | read-write | current | The interval of the local device send the LLDPDU to the neighbor device. |
| 1.3.6.1.4.1.11863.6.35.1.1.1.4 | ScalarlldpGlobalConfigTtl | read-write | current | TTL multiplier determines the TTL value in the LLDPDU packet which the local device send to the neighbor device. TTL value is the time of the local information… |
| 1.3.6.1.4.1.11863.6.35.1.1.1.5 | ScalarlldpGlobalConfigTxDelay | read-write | current | The delay time of the local device send the LLDPDU packet to the neighbor device. When the config of the local device is changed, it will notify the neighbor d… |
| 1.3.6.1.4.1.11863.6.35.1.1.1.6 | ScalarlldpGlobalConfigInitDelay | read-write | current | When the LLDP mode is changed, the device will initialize after a setting time delay, which can avoid continually initialized when the device continually chang… |
| 1.3.6.1.4.1.11863.6.35.1.1.1.7 | ScalarlldpGlobalConfigTrap | read-write | current | The interval of sending the trap information. When a trap event has happened,just as finded a new neighbor or the neighbor information has changed,the local de… |
| 1.3.6.1.4.1.11863.6.35.1.1.1.8 | ScalarlldpGlobalConfigFastCount | read-write | current | When the LLDP mode of the port changed from disable(or just receive) to send and receive(or just send), the quick send mechanism will be enabled for other devi… |
| 1.3.6.1.4.1.11863.6.35.1.1.2 | TablelldpPortConfigTable | not-accessible | current | A table that contains LLDP information of every port. |
| 1.3.6.1.4.1.11863.6.35.1.1.2.1 | RowlldpPortConfigEntry | not-accessible | current | A list of LLDP information for every port of the device. |
| 1.3.6.1.4.1.11863.6.35.1.1.2.1.1 | ColumnlldpConfigPortId | read-only | current | The port id of the switch. |
| 1.3.6.1.4.1.11863.6.35.1.1.2.1.2 | ColumnlldpConfigPortStatus | read-write | current | Select Enable/Disable Tx/Rx for the Port. 0. Disable 1. EnableTx 2. EnableRx 3. EnableRxTx |
| 1.3.6.1.4.1.11863.6.35.1.1.2.1.3 | ColumnlldpConfigPortSnmpNotifyEnable | read-write | current | Select Enable/Disable Snmp Notify for the Port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.35.1.1.2.1.4 | ColumnlldpConfigPortTlvDescr | read-write | current | Select Enable/Disable TLV description for the Port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.35.1.1.2.1.5 | ColumnlldpConfigPortTlvSysCap | read-write | current | Select Enable/Disable TLV system cap for the Port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.35.1.1.2.1.6 | ColumnlldpConfigPortTlvSysDescr | read-write | current | Select Enable/Disable TLV System description for the Port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.35.1.1.2.1.7 | ColumnlldpConfigPortTlvSysName | read-write | current | Select Enable/Disable TLV System name for the Port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.35.1.1.2.1.8 | ColumnlldpConfigPortTlvManageAddr | read-write | current | Select Enable/Disable TLV manage address for the Port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.35.1.1.2.1.9 | ColumnlldpConfigPortTlvPortVlanId | read-write | current | Select Enable/Disable TLV port Vlan ID for the Port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.35.1.1.2.1.10 | ColumnlldpConfigPortTlvProtoVlanId | read-write | current | Select Enable/Disable TLV Portocol VlanId for the Port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.35.1.1.2.1.11 | ColumnlldpConfigPortTlvVlanName | read-write | current | Select Enable/Disable TLV Vlan name for the Port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.35.1.1.2.1.12 | ColumnlldpConfigPortTlvLinkAggre | read-write | current | Select Enable/Disable TLV link aggre for the Port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.35.1.1.2.1.13 | ColumnlldpConfigPortTlvPortStatus | read-write | current | Select Enable/Disable TLV port status for the Port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.35.1.1.2.1.14 | ColumnlldpConfigPortTlvMaxFrame | read-write | current | Select Enable/Disable TLV max frame for the Port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.35.1.1.2.1.15 | ColumnlldpConfigPortTlvPower | read-write | current | Select Enable/Disable TLV power for the Port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.35.1.1.2.1.16 | ColumnlldpConfigPortManagementAddress | read-write | current | Configure management IP address for the Port. |