TPLINK-LLDPMEDCONFIG-MIB
83 objects
LLDP-MED Private MIB.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-SMI | IpAddress OBJECT-TYPE |
| TPLINK-LLDP-MIB | tplinkLldpMIBObjects |
| TPLINK-TC-MIB | TPRowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11863.6.35.1.4 | NodelldpMed | |||
| 1.3.6.1.4.1.11863.6.35.1.4.1 | NodelldpMedGlobalConfig | |||
| 1.3.6.1.4.1.11863.6.35.1.4.1.1 | ScalarlldpMedGlobalConfigFastStartRepeatCount | read-write | current | When entering LLDP-MED fast start mechanism, multiple LLDP-MED frames will be transmitted based on this parameter. |
| 1.3.6.1.4.1.11863.6.35.1.4.2 | TablelldpMedPortConfigTable | not-accessible | current | A table that contains LLDP-MED information of every port. |
| 1.3.6.1.4.1.11863.6.35.1.4.2.1 | RowlldpMedPortConfigEntry | not-accessible | current | A list of LLDP-MED information for every port of the device. |
| 1.3.6.1.4.1.11863.6.35.1.4.2.1.1 | ColumnlldpMedConfigPortId | read-only | current | The port id of the switch. |
| 1.3.6.1.4.1.11863.6.35.1.4.2.1.2 | ColumnlldpMedConfigPortStatus | read-write | current | Select Enable/Disable LLDP-MED for the Port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.35.1.4.2.1.3 | ColumnlldpMedConfigPortTlvNetworkPolicy | read-write | current | Select Enable/Disable Network Policy TLV for the Port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.35.1.4.2.1.4 | ColumnlldpMedConfigPortTlvLocationId | read-write | current | Select Enable/Disable Location Identification TLV for the Port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.35.1.4.2.1.5 | ColumnlldpMedConfigPortTlvExtendedPower | read-write | current | Select Enable/Disable Extended Power-Via-MDI TLV for the Port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.35.1.4.2.1.6 | ColumnlldpMedConfigPortTlvInventory | read-write | current | Select Enable/Disable Inventory TLV for the Port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.35.1.4.3 | TablelldpMedPortConfigTlvLocationTable | not-accessible | current | A table that contains LLDP-MED Location Identification TLV information of every port. |
| 1.3.6.1.4.1.11863.6.35.1.4.3.1 | RowlldpMedPortConfigTlvLocationEntry | not-accessible | current | A list of LLDP-MED Location Identification TLV information for every port of the device. |
| 1.3.6.1.4.1.11863.6.35.1.4.3.1.1 | ColumnlldpMedConfigLocationPortId | read-only | current | The port id of the switch. |
| 1.3.6.1.4.1.11863.6.35.1.4.3.1.2 | ColumnlldpMedConfigPortLocationEmergencyNumber | read-write | current | Emergency number is Emergency Call Service ELIN identifier, which is used during emergency call setup to a traditional CAMA or ISDN trunk-based PSAP. |
| 1.3.6.1.4.1.11863.6.35.1.4.3.1.3 | ColumnlldpMedConfigPortLocationCivicAddressWhat | read-write | current | This element describes which location the DHCP entry refers to. Currently, three options are defined: the location of the DHCP server (0: DHCP server), the loc… |
| 1.3.6.1.4.1.11863.6.35.1.4.3.1.4 | ColumnlldpMedConfigPortLocationCivicAddressCountryCode | read-write | current | The two-letters ISO 3166 country code in capital ASCII letters, e.g., CN or US. |
| 1.3.6.1.4.1.11863.6.35.1.4.3.1.5 | ColumnlldpMedConfigPortLocationCivicAddressLanguage | read-write | current | Language. |
| 1.3.6.1.4.1.11863.6.35.1.4.3.1.6 | ColumnlldpMedConfigPortLocationCivicAddressProvince | read-write | current | Province or State. |
| 1.3.6.1.4.1.11863.6.35.1.4.3.1.7 | ColumnlldpMedConfigPortLocationCivicAddressCounty | read-write | current | County. |
| 1.3.6.1.4.1.11863.6.35.1.4.3.1.8 | ColumnlldpMedConfigPortLocationCivicAddressCity | read-write | current | City. |
| 1.3.6.1.4.1.11863.6.35.1.4.3.1.9 | ColumnlldpMedConfigPortLocationCivicAddressStreet | read-write | current | Street. |
| 1.3.6.1.4.1.11863.6.35.1.4.3.1.10 | ColumnlldpMedConfigPortLocationCivicAddressHouseNumber | read-write | current | House number. |
| 1.3.6.1.4.1.11863.6.35.1.4.3.1.11 | ColumnlldpMedConfigPortLocationCivicAddressName | read-write | current | Residence and office occupant name. |
| 1.3.6.1.4.1.11863.6.35.1.4.3.1.12 | ColumnlldpMedConfigPortLocationCivicAddressPostalZipCode | read-write | current | Postal/zip code. |
| 1.3.6.1.4.1.11863.6.35.1.4.3.1.13 | ColumnlldpMedConfigPortLocationCivicAddressRoomNumber | read-write | current | Room number. |
| 1.3.6.1.4.1.11863.6.35.1.4.3.1.14 | ColumnlldpMedConfigPortLocationCivicAddressPostOfficeBox | read-write | current | Post office box. |
| 1.3.6.1.4.1.11863.6.35.1.4.3.1.15 | ColumnlldpMedConfigPortLocationCivicAddressAdditional | read-write | current | Additional information. |
| 1.3.6.1.4.1.11863.6.35.1.4.4 | TablelldpMedLocalInfoTable | not-accessible | current | Local port LLDP-MED information entries. |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1 | RowlldpMedLocalInfoEntry | not-accessible | current | An entry contains of the LLDP-MED information of local port of the switch. |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1.1 | ColumnlldpMedLocalPortId | read-only | current | Display the port index. |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1.2 | ColumnlldpMEDLocalCapabilities | read-only | current | Display the LLDP-MED capabilities the switch supports. |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1.3 | ColumnlldpMedLocalDeviceType | read-only | current | LLDP-MED devices are comprised of two primary device types: Network Connectivity Devices and Endpoint Devices. In turn, Endpoint Devices are composed of three … |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1.4 | ColumnlldpMedLocalApplicationType | read-only | current | Display the primary function of the applications defined for the network policy. |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1.5 | ColumnlldpMedLocalUnknownPolicy | read-only | current | A value of 'Yes' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the Layer 2 Priority and… |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1.6 | ColumnlldpMedLocalAppTagged | read-only | current | Indicate whether the specified application type is using a 'tagged' or an 'untagged' VLAN. |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1.7 | ColumnlldpMedLocalAppVLANID | read-only | current | An extension of the VLAN Identifier for the port, as defined in IEEE 802.1P-1998. |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1.8 | ColumnlldpMedLocalAppLayer2Priority | read-only | current | Contain the value of the 802.1p priority which is associated with the given port on the local system. |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1.9 | ColumnlldpMedLocalAppDSCP | read-only | current | Contain the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with the given port on the local… |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1.10 | ColumnlldpMedLocalLocationDataFormat | read-only | current | The location subtype advertised by the local system. |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1.11 | ColumnlldpMedLocalLocationID | read-only | current | The location information. Parsing of this information is depedent upon the location subtype. |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1.12 | ColumnlldpMedLocalPowerType | read-only | current | Defines the type of Power-Via-MDI advertised by the local device. |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1.13 | ColumnlldpMedLocalPowerSource | read-only | current | Defines the type of PSE Power Source advertised by the local device. |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1.14 | ColumnlldpMedLocalPowerPriority | read-only | current | Reflects the PD power priority that is being advertised on this PSE port. |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1.15 | ColumnlldpMedLocalPowerValue | read-only | current | Contain the value of the power available from the PSE via this port. |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1.16 | ColumnlldpMedLocalInventoryHardwareRevision | read-only | current | The vendor-specific hardware revision string as advertised by the local system. |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1.17 | ColumnlldpMedLocalInventoryFirmwareRevision | read-only | current | The vendor-specific firmware revision string as advertised by the local system. |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1.18 | ColumnlldpMedLocalInventorySoftwareRevision | read-only | current | The vendor-specific software revision string as advertised by the local system. |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1.19 | ColumnlldpMedLocalInventorySerialNumber | read-only | current | The vendor-specific serial number as advertised by the local system. |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1.20 | ColumnlldpMedLocalInventoryManufacturerName | read-only | current | The vendor-specific manufacturer name as advertised by the local system. |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1.21 | ColumnlldpMedLocalInventoryModelName | read-only | current | The vendor-specific model name as advertised by the local system. |
| 1.3.6.1.4.1.11863.6.35.1.4.4.1.22 | ColumnlldpMedLocalInventoryAssetID | read-only | current | The vendor-specific asset tracking identifier as advertised by the local system. |
| 1.3.6.1.4.1.11863.6.35.1.4.5 | IdentitylldpMedNeighborInfo | LLDP-MED Private MIB. | ||
| 1.3.6.1.4.1.11863.6.35.1.4.5.1 | TablelldpMedNeighborInfoTable | not-accessible | current | Neighbor port information entries. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.1.1 | RowlldpMedNeighborInfoEntry | not-accessible | current | An entry contains of the information of neighbor port except the network policy information. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.1.1.1 | ColumnlldpMedNeighborPortId | read-only | current | Display the port index. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.1.1.2 | ColumnlldpMedNeighborPortIndexId | read-only | current | Display the neighbor index. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.1.1.3 | ColumnlldpMEDNeighborCapabilities | read-only | current | LLDP-MED capabilities of remote devices connected to the device ports and communicating via LLDP-MED. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.1.1.4 | ColumnlldpMedNeighborDeviceType | read-only | current | Device Class as advertised by the device remotely connected to the port. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.1.1.5 | ColumnlldpMedNeighborLocationDataFormat | read-only | current | The location subtype advertised by the remote endpoint. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.1.1.6 | ColumnlldpMedNeighborLocationID | read-only | current | The location information advertised by the remote endpoint. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.1.1.7 | ColumnlldpMedNeighborPowerType | read-only | current | Defines the type of Power-Via-MDI advertised by the remote device. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.1.1.8 | ColumnlldpMedNeighborPowerSource | read-only | current | Defines the type of Power Source advertised as being used by the device connected remotely to the port. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.1.1.9 | ColumnlldpMedNeighborPowerPriority | read-only | current | Definces the priority advertised as being required by the PD connected remotely to the port. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.1.1.10 | ColumnlldpMedNeighborPowerValue | read-only | current | Conatin the value of the power required by a PD connected remotely to the port. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.1.1.11 | ColumnlldpMedNeighborInventoryHardwareRevision | read-only | current | The vendor-specific hardware revision string as advertised by the remote endpoint. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.1.1.12 | ColumnlldpMedNeighborInventoryFirmwareRevision | read-only | current | The vendor-specific firmware revision string as advertised by the remote endpoint. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.1.1.13 | ColumnlldpMedNeighborInventorySoftwareRevision | read-only | current | The vendor-specific software revision string as advertised by the remote endpoint. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.1.1.14 | ColumnlldpMedNeighborInventorySerialNumber | read-only | current | The vendor-specific serial number as advertised by the remote endpoint. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.1.1.15 | ColumnlldpMedNeighborInventoryManufacturerName | read-only | current | The vendor-specific manufacturer name as advertised by the remote endpoint. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.1.1.16 | ColumnlldpMedNeighborInventoryModelName | read-only | current | The vendor-specific model name as advertised by the remote endpoint. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.1.1.17 | ColumnlldpMedNeighborInventoryAssetID | read-only | current | The vendor-specific asset tracking identifier as advertised by the remote endpoint. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.2 | TablelldpMedNeighborMediaPolicyInfoTable | not-accessible | current | Neighbor port media policy information entries. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.2.1 | RowlldpMedNeighborMediaPolicyInfoEntry | not-accessible | current | Information about a particular policy on a specific port component. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.2.1.1 | ColumnlldpMedNeighborPort | read-only | current | Display the port index. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.2.1.2 | ColumnlldpMedNeighborPortIndex | read-only | current | Display the neighbor index. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.2.1.3 | ColumnlldpMedNeighborMediaPolicyIndex | read-only | current | Display the neighbor media policy index. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.2.1.4 | ColumnlldpMedNeighborApplicationType | read-only | current | The media type that defines the primary function of the application for the policy advertised by the endpoint connected remotely to this port. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.2.1.5 | ColumnlldpMedNeighborUnknownPolicy | read-only | current | A value of 'Yes' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority and… |
| 1.3.6.1.4.1.11863.6.35.1.4.5.2.1.6 | ColumnlldpMedNeighborAppTagged | read-only | current | Indicate whether the specified application type is using a 'tagged' or an 'untagged' VLAN. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.2.1.7 | ColumnlldpMedNeighborAppVLANID | read-only | current | An extension of the VLAN Identifier for the remote system connected to this port, as defined in IEEE 802.1P-1998. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.2.1.8 | ColumnlldpMedNeighborAppLayer2Priority | read-only | current | Contain the value of the 802.1p priority which is associated with the remote system connected at given port. |
| 1.3.6.1.4.1.11863.6.35.1.4.5.2.1.9 | ColumnlldpMedNeighborAppDSCP | read-only | current | Contain the value of the Differentiated Service Code Point (DSCP) as defined in IETF 2474 and RFC 2475 which is assocaited with remote system connected at the … |