TPLINK-MLDSNOOPING-MIB
66 objects
Private MIB for mldSnooping manage.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE |
| TPLINK-MIB | tplinkMgmt |
| TPLINK-TC-MIB | TPRowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11863.6.43 | IdentitytplinkMldSnoopingMIB | Private MIB for mldSnooping manage. | ||
| 1.3.6.1.4.1.11863.6.43.1 | NodetplinkMldSnoopingMIBObjects | |||
| 1.3.6.1.4.1.11863.6.43.1.1 | NodetpMldSnooping | |||
| 1.3.6.1.4.1.11863.6.43.1.1.1 | NodetpMldSnoopingGlobalConfig | |||
| 1.3.6.1.4.1.11863.6.43.1.1.1.1 | ScalartpMldSnoopingEnable | read-write | current | Select Enable/Disable MLD Snooping function globally on the Switch. 0. disable 1. enable |
| 1.3.6.1.4.1.11863.6.43.1.1.1.2 | ScalartpMldUnknownMulticastPacket | read-write | current | Select the operation for the switch to process unknown multicast. 0. forward 1. discard |
| 1.3.6.1.4.1.11863.6.43.1.1.2 | NodetpMldPortConfig | |||
| 1.3.6.1.4.1.11863.6.43.1.1.2.1 | TabletpMldPortTable | not-accessible | current | MLD Snooping (Internet Group Management Protocol Snooping) is a multicast control mechanism running on Layer 2 switch. It can effectively prevent multicast gro… |
| 1.3.6.1.4.1.11863.6.43.1.1.2.1.1 | RowtpMldPortEntry | not-accessible | current | An entry contains of the information of port configure. |
| 1.3.6.1.4.1.11863.6.43.1.1.2.1.1.2 | ColumntpMldSnoopingPortEnable | read-write | current | Select Enable/Disable MLD Snooping for the desired port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.43.1.1.2.1.1.3 | ColumntpMldFastLeavePortEnable | read-write | current | Select Enable/Disable Fast Leave feature for the desired port. If Fast Leave is enabled for a port, the Switch will immediately remove this port from the multi… |
| 1.3.6.1.4.1.11863.6.43.1.1.2.1.1.4 | ColumntpMldPortLag | read-only | current | Displays the LAG number which the port belongs to. |
| 1.3.6.1.4.1.11863.6.43.1.1.3 | NodetpMldVlanConfig | |||
| 1.3.6.1.4.1.11863.6.43.1.1.3.1 | TabletpMldVlanTable | not-accessible | current | Multicast groups established by MLD Snooping are based on VLANs. You can configure different MLD parameters for different VLANs. |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1 | RowtpMldVlanEntry | not-accessible | current | An entry contains of the information of mldsnooping. |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.1 | ColumntpMldVlanId | read-only | current | Enter the VLAN ID to enable MLD Snooping for the desired VLAN,1-4094. |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.2 | ColumntpMldVlanEnable | read-write | current | Select Enable/Disable MLD Snooping for the desired vlan. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.3 | ColumntpMldVlanFastLeave | read-write | current | Select Enable/Disable Fast Leave feature for the desired vlan. If Fast Leave is enabled for a vlan, the Switch will immediately remove this port from the multi… |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.4 | ColumntpMldVlanReportSuppression | read-write | current | Select Enable/Disable MLD Snooping report suppression function globally on the Switch. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.5 | ColumntpMldRouterTime | read-create | current | Specify the aging time of the router port. Within this time, if the switch don't receive MLD query message from the router port, it will consider this port is … |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.6 | ColumntpMldMemberTime | read-create | current | Specify the aging time of the member port. Within this time, if the switch don't receive MLD report message from the member port, it will consider this port is… |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.7 | ColumntpMldLeaveTime | read-create | current | Specify the leave time for the VLAN. When the switch receives a leave message from a port to leave a multicast group, it will wait for a leave time before remo… |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.8 | ColumntpMldRouterPort | read-create | current | Config the static router ports which are mainly used in the network with stable topology. |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.9 | ColumntpMldForbiddenRouterPort | read-create | current | Config the forbidden router ports which are mainly used to forbidden specified ports to become router ports. |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.10 | ColumntpMldQueryEnable | read-write | current | Select Enable/Disable MLD Querier. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.11 | ColumntpMldQueryInterval | read-create | current | Enter the Query message interval time. The Querier will send General Query Message with this interval. The interval is ranging from 10 to 300 seconds. |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.12 | ColumntpMldQueryMaxResponseTime | read-create | current | Enter the value of Maximum Response Time field of the Query message. The host is expected to response to an IGMP general query within this time. The time is ra… |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.13 | ColumntpMldQueryGeneralSrcIp | read-create | current | Enter the General Query Message source IP address. |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.14 | ColumntpMldQueryLastMemberCount | read-create | current | Enter the Last Listener Query numbers. When the multicast group has no more member ports, it will send this numbers of Specific Query Message to check whether … |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.15 | ColumntpMldQueryLastMemberInterval | read-create | current | Enter the Last Listener Query interval time. When the multicast group has no more member ports, it will send the Specific Query Message with this interval time… |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.16 | ColumntpMldVlanStatus | read-create | current | the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, bu… |
| 1.3.6.1.4.1.11863.6.43.1.2 | NodetpMldFilter | |||
| 1.3.6.1.4.1.11863.6.43.1.2.1 | NodetpMldPortFilterConfig | |||
| 1.3.6.1.4.1.11863.6.43.1.2.1.1 | TabletpMldFilterPortTable | not-accessible | current | When the switch receives MLD report message, it examines the multicast filtering IP ID configured on the access port to determine if the port can join the mult… |
| 1.3.6.1.4.1.11863.6.43.1.2.1.1.1 | RowtpMldFilterPortEntry | not-accessible | current | An entry contains of the information of a port param. |
| 1.3.6.1.4.1.11863.6.43.1.2.1.1.1.2 | ColumntpMldFilterMaxGroup | read-write | current | Specify the maximum number of multicast groups to prevent some ports taking up too much bandwidth. |
| 1.3.6.1.4.1.11863.6.43.1.2.1.1.1.3 | ColumntpMldFilterMaxGroupAction | read-write | current | The policy should be taken when the number of multicast group a port has joined reach the maximum. 0.Drop: drop the successive report packet, and this port can… |
| 1.3.6.1.4.1.11863.6.43.1.2.1.1.1.4 | ColumntpMldFilterBindAddrId | read-write | current | Enter the profile ID the port will be bound to. Only one profile can be bound to each port. |
| 1.3.6.1.4.1.11863.6.43.1.2.1.1.1.5 | ColumntpMldFilterPortLag | read-only | current | Displays the LAG number which the port belongs to. |
| 1.3.6.1.4.1.11863.6.43.1.3 | NodetpMldPacketStatistic | |||
| 1.3.6.1.4.1.11863.6.43.1.3.1 | NodetpMldPktStat | |||
| 1.3.6.1.4.1.11863.6.43.1.3.1.1 | TabletpMldPktStatTable | not-accessible | current | A list of multicast statistic Table. |
| 1.3.6.1.4.1.11863.6.43.1.3.1.1.1 | RowtpMldPktStatEntry | not-accessible | current | An entry contains of multicast packet statistics over each port. |
| 1.3.6.1.4.1.11863.6.43.1.3.1.1.1.2 | ColumntpMldQueryPktStat | read-only | current | Displays the number of query packets the port received. |
| 1.3.6.1.4.1.11863.6.43.1.3.1.1.1.3 | ColumntpMldReportV1PktStat | read-only | current | Displays the number of MLDv1 report packets the port received. |
| 1.3.6.1.4.1.11863.6.43.1.3.1.1.1.4 | ColumntpMldReportV2PktStat | read-only | current | Displays the number of MLDv2 report packets the port received. |
| 1.3.6.1.4.1.11863.6.43.1.3.1.1.1.6 | ColumntpMldDonePktStat | read-only | current | Displays the number of done packets the port received. |
| 1.3.6.1.4.1.11863.6.43.1.3.1.1.1.7 | ColumntpMldErrorPktStat | read-only | current | Displays the number of error packets the port received. |
| 1.3.6.1.4.1.11863.6.43.1.3.1.2 | ScalartpIpMldPktStatClear | read-write | current | mld packet statistic clear. |
| 1.3.6.1.4.1.11863.6.43.1.4 | NodetpMldMultigroup | |||
| 1.3.6.1.4.1.11863.6.43.1.4.1 | NodetpMldMulticastGroups | |||
| 1.3.6.1.4.1.11863.6.43.1.4.1.1 | TabletpMldMulticastGroupTable | not-accessible | current | A list of multicast groups Table. |
| 1.3.6.1.4.1.11863.6.43.1.4.1.1.1 | RowtpMldMulticastGroupEntry | not-accessible | current | An entry contains of multicast packet statistics over each port. |
| 1.3.6.1.4.1.11863.6.43.1.4.1.1.1.1 | ColumntpMldMulticastIP | read-only | current | Displays the multicast IP address. |
| 1.3.6.1.4.1.11863.6.43.1.4.1.1.1.2 | ColumntpMldVlanID | read-only | current | Displays the VLAN ID. |
| 1.3.6.1.4.1.11863.6.43.1.4.1.1.1.3 | ColumntpMldForwardPorts | read-only | current | Displays the forward ports of multicast group. |
| 1.3.6.1.4.1.11863.6.43.1.4.1.1.1.4 | ColumntpMldGrouptype | read-only | current | Displays the type of multicast group. |
| 1.3.6.1.4.1.11863.6.43.1.5 | NodetpMldStaticMultigroup | |||
| 1.3.6.1.4.1.11863.6.43.1.5.1 | NodetpMldMulticastStaticGroups | |||
| 1.3.6.1.4.1.11863.6.43.1.5.1.1 | TabletpMldMulticastStaticGroupTable | not-accessible | current | A list of multicast groups Table. |
| 1.3.6.1.4.1.11863.6.43.1.5.1.1.1 | RowtpMldMulticastStaticGroupEntry | not-accessible | current | An entry contains of multicast packet statistics over each port. |
| 1.3.6.1.4.1.11863.6.43.1.5.1.1.1.1 | ColumntpMldStaticMulticastIP | read-create | current | The multicast IP address. |
| 1.3.6.1.4.1.11863.6.43.1.5.1.1.1.2 | ColumntpMldStaticVlanID | read-create | current | The VLAN ID. |
| 1.3.6.1.4.1.11863.6.43.1.5.1.1.1.3 | ColumntpMldStaticForwardPorts | read-create | current | The forward ports of multicast group. |
| 1.3.6.1.4.1.11863.6.43.1.5.1.1.1.4 | ColumntpMldStaticGroupStatus | read-create | current | The following values are states: these values may be used as follow: active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),desto… |
| 1.3.6.1.4.1.11863.6.43.2 | NodetplinkMldSnoopingNotifications |