TPLINK-MVR-MIB
26 objects
Private MIB for mvr manage.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE |
| TPLINK-MIB | tplinkMgmt |
| TPLINK-TC-MIB | TPRowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11863.6.99 | IdentitytplinkMvrMIB | Private MIB for mvr manage. | ||
| 1.3.6.1.4.1.11863.6.99.1 | NodetplinkMvrMIBObjects | |||
| 1.3.6.1.4.1.11863.6.99.1.1 | NodetpMvrGlobalConfig | |||
| 1.3.6.1.4.1.11863.6.99.1.1.1 | ScalartpMvrAdminMode | read-write | current | Select Enable/Disable MVR function globally on the Switch. 0. disable 1. enable |
| 1.3.6.1.4.1.11863.6.99.1.1.2 | ScalartpMvrModeType | read-write | current | Shows/Changes MVR mode. The value compatible(1) indicates that compatible mode is enabled. A value of dynamic(2) indicates that dynamic mode is enabled. |
| 1.3.6.1.4.1.11863.6.99.1.1.3 | ScalartpMvrMulticastVlanId | read-write | current | Shows/Changes the Multicast Vlan number. |
| 1.3.6.1.4.1.11863.6.99.1.1.4 | ScalartpMvrMaxMulticastGroupsCount | read-only | current | The maximum number of multicast groups that is supported by MVR. |
| 1.3.6.1.4.1.11863.6.99.1.1.5 | ScalartpMvrCurrentMulticastGroupsCount | read-only | current | The current number of MVR groups allocated. |
| 1.3.6.1.4.1.11863.6.99.1.1.6 | ScalartpMvrQueryTime | read-write | current | Shows/Changes the MVR Query time, in centiseconds. |
| 1.3.6.1.4.1.11863.6.99.1.2 | NodetpMvrPortConfig | |||
| 1.3.6.1.4.1.11863.6.99.1.2.1 | TabletpMvrPortTable | not-accessible | current | A table of MVR control information about every bridge port. This is indexed by mvrBasePort. |
| 1.3.6.1.4.1.11863.6.99.1.2.1.1 | RowtpMvrPortEntry | not-accessible | current | An entry contains of the information of port configure. |
| 1.3.6.1.4.1.11863.6.99.1.2.1.1.2 | ColumntpMvrPortEnable | read-write | current | Select Enable/Disable MVR for the desired port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.99.1.2.1.1.3 | ColumntpMvrPortType | read-write | current | MVR Interface type. |
| 1.3.6.1.4.1.11863.6.99.1.2.1.1.4 | ColumntpMvrPortImmediateLeaveMode | read-write | current | Select Enable/Disable Immediate Leave mode for MVR port. 0. Disable 1. Enable |
| 1.3.6.1.4.1.11863.6.99.1.2.1.1.5 | ColumntpMvrPortStatus | read-only | current | The interface status. |
| 1.3.6.1.4.1.11863.6.99.1.3 | NodetpMvrGroupConfig | |||
| 1.3.6.1.4.1.11863.6.99.1.3.1 | TabletpMvrGroupTable | not-accessible | current | A table of MVR groups. |
| 1.3.6.1.4.1.11863.6.99.1.3.1.1 | RowtpMvrGroupEntry | not-accessible | current | MVR information of membership group. |
| 1.3.6.1.4.1.11863.6.99.1.3.1.1.1 | ColumntpMvrGroupIPAddress | read-create | current | The multicast Group IP address. |
| 1.3.6.1.4.1.11863.6.99.1.3.1.1.2 | ColumntpMvrGroupStatus | read-only | current | The status of the specific MVR group. |
| 1.3.6.1.4.1.11863.6.99.1.3.1.1.3 | ColumntpMvrGroupForwardPorts | read-only | current | Display the forward ports of multicast mvr group. |
| 1.3.6.1.4.1.11863.6.99.1.3.1.1.4 | ColumntpMvrGroupAddForwardPorts | read-write | current | Add forward ports to multicast mvr group. |
| 1.3.6.1.4.1.11863.6.99.1.3.1.1.5 | ColumntpMvrGroupDelForwardPorts | read-write | current | Delete forward ports of multicast mvr group. |
| 1.3.6.1.4.1.11863.6.99.1.3.1.1.6 | ColumntpMvrGroupRowStatus | read-create | current | the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, bu… |
| 1.3.6.1.4.1.11863.6.99.2 | NodetplinkMvrNotifications |