TPLINK-QOS-MIB
26 objects
Private MIB for system time configuration.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| TPLINK-MIB | tplinkMgmt |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11863.6.22 | IdentitytplinkQosMIB | Private MIB for system time configuration. | ||
| 1.3.6.1.4.1.11863.6.22.1 | NodetplinkQosMIBObjects | |||
| 1.3.6.1.4.1.11863.6.22.1.1 | NodetplinkQosBasicConfig | |||
| 1.3.6.1.4.1.11863.6.22.1.1.1 | TabletpQosBasicConfigTable | not-accessible | current | A list of qos basic config entries. Here you can configure the port priority. |
| 1.3.6.1.4.1.11863.6.22.1.1.1.1 | RowtpQosBasicConfigEntry | not-accessible | current | An entry contains of the information of qos basic config. |
| 1.3.6.1.4.1.11863.6.22.1.1.1.1.1 | ColumntpQosBasicConfigPort | read-only | current | The physical port number of the switch. |
| 1.3.6.1.4.1.11863.6.22.1.1.1.1.2 | ColumntpQosBasicConfigPri | read-write | current | 0. Cos0 1. Cos1 2. Cos2 3. Cos3 4. Cos4 5. Cos5 6. Cos6 7. Cos7 Specify the priority for the port. |
| 1.3.6.1.4.1.11863.6.22.1.1.1.1.3 | ColumntpQosBasicConfigLag | read-only | current | The LAG number which the port belongs to. |
| 1.3.6.1.4.1.11863.6.22.1.2 | NodetplinkQosScheduler | |||
| 1.3.6.1.4.1.11863.6.22.1.2.1 | ScalartpQosSchedulerConfig | read-write | current | Here you can select the schedule mode for the switch. 0. SP-Mode: Strict-Priority Mode. In this mode, the queue with higher priority will occupy the whole band… |
| 1.3.6.1.4.1.11863.6.22.1.2.2 | TabletpQosSchedulerWeightTable | not-accessible | current | A table of the information of qos scheduler queue weight. |
| 1.3.6.1.4.1.11863.6.22.1.2.2.1 | RowtpQosSchedulerWeightEntry | not-accessible | current | An entry contains of the information of qos scheduler queue weight config. |
| 1.3.6.1.4.1.11863.6.22.1.2.2.1.1 | ColumntpQosSchedulerTc | read-only | current | Indicates the priority level the packets go egress. The priority levels are labeled as TC. |
| 1.3.6.1.4.1.11863.6.22.1.2.2.1.2 | ColumntpQosSchedulerWeight | read-write | current | Indecates the egress queue weight value. The value ranges from 0 to 127. |
| 1.3.6.1.4.1.11863.6.22.1.3 | NodetplinkQos8021p | |||
| 1.3.6.1.4.1.11863.6.22.1.3.2 | TabletpQos8021pTable | not-accessible | current | A list of qos 8021p entries. Here you can configure 802.1P Priority. |
| 1.3.6.1.4.1.11863.6.22.1.3.2.1 | RowtpQos8021pEntry | not-accessible | current | An entry contains of the information of qos 8021p. |
| 1.3.6.1.4.1.11863.6.22.1.3.2.1.1 | ColumntpQos8021pPriTag | read-only | current | Indicates the precedence level defined by IEEE802.1P. |
| 1.3.6.1.4.1.11863.6.22.1.3.2.1.2 | ColumntpQos8021pPriLevel | read-write | current | Indicates the priority level the packets with tag are mapped to. The priority levels are labeled as TC. |
| 1.3.6.1.4.1.11863.6.22.1.4 | NodetplinkQosDSCP | |||
| 1.3.6.1.4.1.11863.6.22.1.4.1 | ScalartpQosDSCPEnable | read-write | current | 0. disable 1. enable Here you can enable or disable DSCP Priority. |
| 1.3.6.1.4.1.11863.6.22.1.4.2 | TabletpQosDSCPTable | not-accessible | current | A list of qos DSCP entries. Here you can configure DSCP Priority. |
| 1.3.6.1.4.1.11863.6.22.1.4.2.1 | RowtpQosDSCPEntry | not-accessible | current | An entry contains of the information of qos DSCP. |
| 1.3.6.1.4.1.11863.6.22.1.4.2.1.1 | ColumntpQosDSCPPriTag | read-only | current | Indicates the priority determined by the DS region of IP datagram. It ranges from 0 to 63. |
| 1.3.6.1.4.1.11863.6.22.1.4.2.1.2 | ColumntpQosDSCPPriLevel | read-write | current | Indicates the priority level the packets with tag are mapped to. The priority levels are labeled as cos0 - cos7. |
| 1.3.6.1.4.1.11863.6.22.2 | NodetplinkQosNotifications |