TPLINK-RIP-MIB
42 objects
Private MIB for RIP configuration.
Imported Objects
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE |
| TPLINK-MIB | tplinkMgmt |
| TPLINK-TC-MIB | TPRowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11863.6.40 | IdentitytplinkRipMIB | Private MIB for RIP configuration. | ||
| 1.3.6.1.4.1.11863.6.40.1 | NodetplinkRipMIBObjects | |||
| 1.3.6.1.4.1.11863.6.40.1.1 | NodetpRipBasicConfig | |||
| 1.3.6.1.4.1.11863.6.40.1.1.1 | ScalartpRipProtocolCtrl | read-write | current | Enable or disable the RIP function on the switch. |
| 1.3.6.1.4.1.11863.6.40.1.1.2 | ScalartpRipProtocolVersion | read-write | current | Choose the global RIP version. |
| 1.3.6.1.4.1.11863.6.40.1.1.3 | ScalartpRipDistance | read-write | current | Set the RIP router distance. |
| 1.3.6.1.4.1.11863.6.40.1.1.4 | ScalartpRipAutoSumm | read-write | current | If you select enable groups of adjacent routes will be summarized into single entries. |
| 1.3.6.1.4.1.11863.6.40.1.1.5 | ScalartpRipDefaultMetric | read-write | current | Set the default metric for redistributed routes. |
| 1.3.6.1.4.1.11863.6.40.1.1.6 | ScalartpRipRedistriStatic | read-write | current | Choose to distribute Static router entries to RIP,the default is disable. |
| 1.3.6.1.4.1.11863.6.40.1.1.7 | ScalartpRipRedistriOspf | read-write | current | Choose to distribute OSPF router entries to RIP,the default is disable.. |
| 1.3.6.1.4.1.11863.6.40.1.1.8 | ScalartpRipRedistStaticMetric | read-write | current | Set the metric for redistributed static routes. |
| 1.3.6.1.4.1.11863.6.40.1.1.9 | ScalartpRipRedistOspfMetric | read-write | current | Set the metric for redistributed OSPF routes. |
| 1.3.6.1.4.1.11863.6.40.1.1.10 | ScalartpRipUpdateTimer | read-write | current | The timer interval to generate a complete response to every neighboring gateway. |
| 1.3.6.1.4.1.11863.6.40.1.1.11 | ScalartpRipTimeOutTimer | read-write | current | Upon expiration of the timeout, the route is no longer valid and setted to unreachable. |
| 1.3.6.1.4.1.11863.6.40.1.1.12 | ScalartpRipGarbageTimer | read-write | current | Upon expiration of the garbage-collection timer, the route is finally removed from the tables. |
| 1.3.6.1.4.1.11863.6.40.1.2 | NodetpRipNetworkConfig | |||
| 1.3.6.1.4.1.11863.6.40.1.2.1 | TabletpRipNetworkTable | not-accessible | current | The list of rip network. |
| 1.3.6.1.4.1.11863.6.40.1.2.1.1 | RowtpRipNetworkEntry | not-accessible | current | RIP network entries. |
| 1.3.6.1.4.1.11863.6.40.1.2.1.1.1 | ColumntpRipNetworkAddress | read-create | current | RIP network IP address. |
| 1.3.6.1.4.1.11863.6.40.1.2.1.1.2 | ColumntpRipNetworkStatus | read-create | current | The following values are states: these values may be used as follow: active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),desto… |
| 1.3.6.1.4.1.11863.6.40.1.3 | NodetpRipInterfaceConfig | |||
| 1.3.6.1.4.1.11863.6.40.1.3.1 | TabletpRipInterfaceTable | not-accessible | current | The list of rip interfaces. |
| 1.3.6.1.4.1.11863.6.40.1.3.1.1 | RowtpRipInterfaceEntry | not-accessible | current | Config the RIP parameters of the interface. |
| 1.3.6.1.4.1.11863.6.40.1.3.1.1.1 | ColumntpRipInterfaceID | read-only | current | The interface IP address and subnet mask. |
| 1.3.6.1.4.1.11863.6.40.1.3.1.1.2 | ColumntpRipInterfaceStatus | read-only | current | The interface RIP status(up or down). |
| 1.3.6.1.4.1.11863.6.40.1.3.1.1.3 | ColumntpRipInterfaceSendVersion | read-write | current | Select the version of RIP control packets sended from the interface. |
| 1.3.6.1.4.1.11863.6.40.1.3.1.1.4 | ColumntpRipInterfaceRecvVersion | read-write | current | Select the version of RIP control packets received from the interface. |
| 1.3.6.1.4.1.11863.6.40.1.3.1.1.5 | ColumntpRipInterfaceRIPv2Broad | read-write | current | Send RIP version 2 formatted packets via broadcast. |
| 1.3.6.1.4.1.11863.6.40.1.3.1.1.6 | ColumntpRipInterfaceAuthMode | read-write | current | Select an authentication type. |
| 1.3.6.1.4.1.11863.6.40.1.3.1.1.7 | ColumntpRipInterfaceKeyID | read-write | current | Enter the RIP Authentication Key ID for the specified interface. |
| 1.3.6.1.4.1.11863.6.40.1.3.1.1.8 | ColumntpRipInterfaceKey | read-write | current | Enter the RIP Authentication Key for the specified interface. |
| 1.3.6.1.4.1.11863.6.40.1.3.1.1.9 | ColumntpRipInterfaceSplitHorizon | read-write | current | Enable or disable the split horizon. |
| 1.3.6.1.4.1.11863.6.40.1.3.1.1.10 | ColumntpRipInterfacePoisonReverse | read-write | current | Enable or disable the poison reverse. |
| 1.3.6.1.4.1.11863.6.40.1.4 | NodetpRipRouteItems | |||
| 1.3.6.1.4.1.11863.6.40.1.4.1 | TabletpRipRouteTable | not-accessible | current | Display the route entries generated by RIP protocol. |
| 1.3.6.1.4.1.11863.6.40.1.4.1.1 | RowtpRipRouteEntry | not-accessible | current | RIP route entries. |
| 1.3.6.1.4.1.11863.6.40.1.4.1.1.1 | ColumntpRipIpAddressMask | read-only | current | The destination IP address and subnet mask. |
| 1.3.6.1.4.1.11863.6.40.1.4.1.1.2 | ColumntpRipGateway | read-only | current | The gateway interface to send the data packet. |
| 1.3.6.1.4.1.11863.6.40.1.4.1.1.3 | ColumntpRipMetric | read-only | current | The metric to reach the destination IP address. |
| 1.3.6.1.4.1.11863.6.40.1.4.1.1.4 | ColumntpRipInterfaceName | read-only | current | The gateway interface name. |
| 1.3.6.1.4.1.11863.6.40.1.4.1.1.5 | ColumntpRipTimers | read-only | current | The time of the route entry. |
| 1.3.6.1.4.1.11863.6.40.2 | NodetplinkRipNotifications |