TPLINK-SNMPRMON-MIB
65 objects
No module-level DESCRIPTION found.
Imported Objects
| SNMPv2-SMI | Counter32 OBJECT-TYPE TimeTicks |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| TPLINK-SNMP-MIB | tplinkSnmpMIBObjects |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11863.6.32.1.2 | NodetpSnmpRmonControl | |||
| 1.3.6.1.4.1.11863.6.32.1.2.1 | NodetpSnmpRmonStatisticsCtrl | |||
| 1.3.6.1.4.1.11863.6.32.1.2.1.1 | TabletpSnmpRmonStatsCtrlTable | not-accessible | current | A list of SNMP RMON STATISTICS control entries. |
| 1.3.6.1.4.1.11863.6.32.1.2.1.1.1 | RowtpSnmpRmonStatsCtrlEntry | not-accessible | current | RMON (Remote Monitoring), basing on SNMP (Simple Network Management Protocol) architecture, functions to monitor the network. Statistics Group, as one of the c… |
| 1.3.6.1.4.1.11863.6.32.1.2.1.1.1.1 | ColumntpSnmpRmonStatsCtrlIndex | read-only | current | The index of this entry. |
| 1.3.6.1.4.1.11863.6.32.1.2.1.1.1.2 | ColumntpSnmpRmonStatsCtrlDataSource | read-create | current | This object identifies the source of the data that this statistics entry is configured to analyze. This source can be any ethernet interface on this device. Th… |
| 1.3.6.1.4.1.11863.6.32.1.2.1.1.1.3 | ColumntpSnmpRmonStatsCtrlOwner | read-create | current | The owner of this entry. |
| 1.3.6.1.4.1.11863.6.32.1.2.1.1.1.4 | ColumntpSnmpRmonStatsCtrlRowStatus | read-create | current | The status column has four defined values: - 'valid(1)', which indicates that the conceptual row is available for using by the managed device; - 'createRequest… |
| 1.3.6.1.4.1.11863.6.32.1.2.2 | NodetpSnmpRmonHistoryCtrl | |||
| 1.3.6.1.4.1.11863.6.32.1.2.2.1 | TabletpSnmpRmonHistoryCtrlTable | not-accessible | current | A list of SNMP RMON hisotry control entries. |
| 1.3.6.1.4.1.11863.6.32.1.2.2.1.1 | RowtpSnmpRmonHistoryCtrlEntry | not-accessible | current | History Group is one of the commonly used RMON (Remote Monitoring) Groups. After a history group is configured, the switch collects network statistics informat… |
| 1.3.6.1.4.1.11863.6.32.1.2.2.1.1.1 | ColumntpSnmpRmonHistoryCtrlIndex | read-only | current | The index of this entry. |
| 1.3.6.1.4.1.11863.6.32.1.2.2.1.1.2 | ColumntpSnmpRmonHistoryCtrlSourcePort | read-write | current | The port from which the history samples were taken. Specify the port in form of 1/0/1. |
| 1.3.6.1.4.1.11863.6.32.1.2.2.1.1.3 | ColumntpSnmpRmonHistoryCtrlInterval | read-write | current | The interval to take samplings from the port. 10sec-3600sec. |
| 1.3.6.1.4.1.11863.6.32.1.2.2.1.1.4 | ColumntpSnmpRmonHistoryCtrlBucketsRequested | read-write | current | The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this historyControlEntry. |
| 1.3.6.1.4.1.11863.6.32.1.2.2.1.1.5 | ColumntpSnmpRmonHistoryCtrlOwner | read-write | current | The name of the device or user that defined the entry. |
| 1.3.6.1.4.1.11863.6.32.1.2.2.1.1.6 | ColumntpSnmpRmonHistoryCtrlStatus | read-write | current | Enable/Disable the corresponding sampling entry. disable(0), disable the history entry. enable(1), enable the history entry. |
| 1.3.6.1.4.1.11863.6.32.1.2.2.2 | TabletpSnmpRmonHistoryDataTable | not-accessible | current | A list of SNMP RMON hisotry data entries. |
| 1.3.6.1.4.1.11863.6.32.1.2.2.2.1 | RowtpSnmpRmonHistoryDataEntry | not-accessible | current | Contains of the history data for a control entry |
| 1.3.6.1.4.1.11863.6.32.1.2.2.2.1.1 | ColumntpSnmpRmonHistoryDataIndex | read-only | current | index |
| 1.3.6.1.4.1.11863.6.32.1.2.2.2.1.2 | ColumntpSnmpRmonHistoryDataSampleIndex | read-only | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same historyControlEntry. This index starts… |
| 1.3.6.1.4.1.11863.6.32.1.2.2.2.1.3 | ColumntpSnmpRmonHistoryDataIntervalStart | read-only | current | The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first… |
| 1.3.6.1.4.1.11863.6.32.1.2.2.2.1.4 | ColumntpSnmpRmonHistoryDataDropEvents | read-only | current | The total number of events in which packets were dropped by the probe due to lack of resources during this sampling interval. Note that this number is not nece… |
| 1.3.6.1.4.1.11863.6.32.1.2.2.2.1.5 | ColumntpSnmpRmonHistoryDataOctets | read-only | current | The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets) |
| 1.3.6.1.4.1.11863.6.32.1.2.2.2.1.6 | ColumntpSnmpRmonHistoryDataPkts | read-only | current | The number of packets (including bad packets) received during this sampling interval. |
| 1.3.6.1.4.1.11863.6.32.1.2.2.2.1.7 | ColumntpSnmpRmonHistoryDataBroadcastPkts | read-only | current | The number of good packets received during this sampling interval that were directed to the broadcast address. |
| 1.3.6.1.4.1.11863.6.32.1.2.2.2.1.8 | ColumntpSnmpRmonHistoryDataMulticastPkts | read-only | current | The number of good packets received during this sampling interval that were directed to the broadcast address. |
| 1.3.6.1.4.1.11863.6.32.1.2.2.2.1.9 | ColumntpSnmpRmonHistoryDataCRCAlignErrors | read-only | current | The number of packets received during this sampling interval that had a length (excluding framing bits but including FCS octets) between 64 and 1518 octets, in… |
| 1.3.6.1.4.1.11863.6.32.1.2.2.2.1.10 | ColumntpSnmpRmonHistoryDataUndersizePkts | read-only | current | The number of packets received during this sampling interval that were less than 64 octets long (excluding framing bits but including FCS octets) and were othe… |
| 1.3.6.1.4.1.11863.6.32.1.2.2.2.1.11 | ColumntpSnmpRmonHistoryDataOversizePkts | read-only | current | The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets) but were other… |
| 1.3.6.1.4.1.11863.6.32.1.2.2.2.1.12 | ColumntpSnmpRmonHistoryDataFragments | read-only | current | The total number of packets received during this sampling interval that were less than 64 octets in length (excluding framing bits but including FCS octets) ha… |
| 1.3.6.1.4.1.11863.6.32.1.2.2.2.1.13 | ColumntpSnmpRmonHistoryDataJabbers | read-only | current | The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets), and had eithe… |
| 1.3.6.1.4.1.11863.6.32.1.2.2.2.1.14 | ColumntpSnmpRmonHistoryDataCollisions | read-only | current | The number of collion received during this sampling interval that |
| 1.3.6.1.4.1.11863.6.32.1.2.2.2.1.15 | ColumntpSnmpRmonHistoryDataUtilization | read-only | current | The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent. |
| 1.3.6.1.4.1.11863.6.32.1.2.3 | NodetpSnmpRmonEventCtrl | |||
| 1.3.6.1.4.1.11863.6.32.1.2.3.1 | TabletpSnmpRmonEventCtrlTable | not-accessible | current | A list of SNMP RMON EVENT control entries. |
| 1.3.6.1.4.1.11863.6.32.1.2.3.1.1 | RowtpSnmpRmonEventCtrlEntry | not-accessible | current | RMON (Remote Monitoring), basing on SNMP (Simple Network Management Protocol) architecture, functions to monitor the network. Event Group, as one of the common… |
| 1.3.6.1.4.1.11863.6.32.1.2.3.1.1.1 | ColumntpSnmpRmonEventCtrlIndex | read-only | current | The index of this entry. |
| 1.3.6.1.4.1.11863.6.32.1.2.3.1.1.2 | ColumntpSnmpRmonEventCtrlUserName | read-write | current | The name of the User or the community to which the event belongs. |
| 1.3.6.1.4.1.11863.6.32.1.2.3.1.1.3 | ColumntpSnmpRmonEventCtrlDesc | read-write | current | Description which is given to the event for identification. |
| 1.3.6.1.4.1.11863.6.32.1.2.3.1.1.4 | ColumntpSnmpRmonEventCtrlType | read-write | current | The event type, which determines the act way of the network device in response to an event. none(1),no processing. log(2),logging the event. snmptrap(3),sendin… |
| 1.3.6.1.4.1.11863.6.32.1.2.3.1.1.5 | ColumntpSnmpRmonEventCtrlOwner | read-write | current | The name of the device or user that defined the entry. |
| 1.3.6.1.4.1.11863.6.32.1.2.3.1.1.6 | ColumntpSnmpRmonEventCtrlStatus | read-write | current | Enable/Disable the corresponding event entry. disable(0),disable the event entry. enable(1),enable the event entry. |
| 1.3.6.1.4.1.11863.6.32.1.2.3.2 | TabletpSnmpRmonEventLogTable | not-accessible | current | A list of log that have been logged. |
| 1.3.6.1.4.1.11863.6.32.1.2.3.2.1 | RowtpSnmpRmonEventLogEntry | not-accessible | current | A set of data describing an event that has been logged. For example, an instance of the logDescription object might be named logDescription.6.47 |
| 1.3.6.1.4.1.11863.6.32.1.2.3.2.1.1 | ColumntpSnmpRmonEventLogEventIndex | read-only | current | The event entry that generated this log entry. The log identified by a particular value of this index is associated with the same eventEntry as identified by t… |
| 1.3.6.1.4.1.11863.6.32.1.2.3.2.1.2 | ColumntpSnmpRmonEventLogIndex | read-only | current | An index that uniquely identifies an entry in the log table amongst those generated by the same eventEntries. These indexes are assigned beginning with 1 and i… |
| 1.3.6.1.4.1.11863.6.32.1.2.3.2.1.3 | ColumntpSnmpRmonEventLogTime | read-only | current | The value of sysUpTime when this log entry was created. |
| 1.3.6.1.4.1.11863.6.32.1.2.3.2.1.4 | ColumntpSnmpRmonEventLogDescription | read-only | current | An implementation dependent description of the event that activated this log entry. |
| 1.3.6.1.4.1.11863.6.32.1.2.4 | NodetpSnmpRmonAlarmCtrl | |||
| 1.3.6.1.4.1.11863.6.32.1.2.4.1 | TabletpSnmpRmonAlarmCtrlTable | not-accessible | current | A list of SNMP RMON EVENT control entries. |
| 1.3.6.1.4.1.11863.6.32.1.2.4.1.1 | RowtpSnmpRmonAlarmCtrlEntry | not-accessible | current | Alarm Group is one of the commonly used RMON Groups. RMON alarm management allows monitoring the specific alarm variables. When the value of a monitored variab… |
| 1.3.6.1.4.1.11863.6.32.1.2.4.1.1.1 | ColumntpSnmpRmonAlarmCtrlIndex | read-only | current | The index of this entry. |
| 1.3.6.1.4.1.11863.6.32.1.2.4.1.1.2 | ColumntpSnmpRmonAlarmCtrlVariable | read-write | current | The packet type that to be count. |
| 1.3.6.1.4.1.11863.6.32.1.2.4.1.1.3 | ColumntpSnmpRmonAlarmCtrlStatisticsIndex | read-write | current | The index of the statistics entry relative with this alarm entry. |
| 1.3.6.1.4.1.11863.6.32.1.2.4.1.1.4 | ColumntpSnmpRmonAlarmCtrlSampleType | read-write | current | The method of sampling the selected variable and calculating the value to be compared against the thresholds. absoluteValue(1),compares the values directly wit… |
| 1.3.6.1.4.1.11863.6.32.1.2.4.1.1.5 | ColumntpSnmpRmonAlarmCtrlRisingThreshold | read-write | current | The rising counter value that triggers the rise hold alarm. |
| 1.3.6.1.4.1.11863.6.32.1.2.4.1.1.6 | ColumntpSnmpRmonAlarmCtrlRisingEvent | read-write | current | The index of the corresponding event which will be triggered if the sampled value is larger than the Rise Hold. |
| 1.3.6.1.4.1.11863.6.32.1.2.4.1.1.7 | ColumntpSnmpRmonAlarmCtrlFallingThreshold | read-write | current | The falling counter value that triggers the fall hold alarm. |
| 1.3.6.1.4.1.11863.6.32.1.2.4.1.1.8 | ColumntpSnmpRmonAlarmCtrlFallingEvent | read-write | current | The index of the corresponding event which will be triggered if the sampled value is lower than the Fall Hold. |
| 1.3.6.1.4.1.11863.6.32.1.2.4.1.1.9 | ColumntpSnmpRmonAlarmCtrlStartUp | read-write | current | Specify the type of the alarm. risingAlarm(1),When the sampled value exceeds the Rise Hold, an alarm event is triggered. fallingAlarm(2),When the sampled value… |
| 1.3.6.1.4.1.11863.6.32.1.2.4.1.1.10 | ColumntpSnmpRmonAlarmCtrlInterval | read-write | current | The alarm interval time in seconds. 10sec-3600sec. |
| 1.3.6.1.4.1.11863.6.32.1.2.4.1.1.11 | ColumntpSnmpRmonAlarmCtrlOwner | read-write | current | The name of the device or user that defined the entry. |
| 1.3.6.1.4.1.11863.6.32.1.2.4.1.1.12 | ColumntpSnmpRmonAlarmCtrlStatus | read-write | current | Enable/Disable the corresponding alarm entry. disable(0),disable the alarm entry. enable(1),enable the alarm entry |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EntryStatus | INTEGER { valid(1), createRequest(2), underCreation(3), invalid(4) } | current | The status of a table entry. |