TPLINK-SYSTOOL-MIB
39 objects
This MIB module contain a collection of managed objects that apply to network devices.
Imported Objects
| SNMPv2-SMI | OBJECT-TYPE |
| TPLINK-MIB | tplinkMgmt |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11863.6.3 | IdentitytplinkSysToolMIB | This MIB module contain a collection of managed objects that apply to network devices. | ||
| 1.3.6.1.4.1.11863.6.3.1 | NodetplinkSysToolMIBObjects | |||
| 1.3.6.1.4.1.11863.6.3.1.1 | ScalartpSysToolReBoot | read-write | current | this used to determine whether to reboot or not |
| 1.3.6.1.4.1.11863.6.3.1.2 | ScalartpSysToolReSet | read-write | current | this used to determine whether to reset or not |
| 1.3.6.1.4.1.11863.6.3.1.3 | ScalartpSysToolConfigSave | read-write | current | This object use to save the current config. |
| 1.3.6.1.4.1.11863.6.3.1.4 | NodetpSysToolReBootSchedule | |||
| 1.3.6.1.4.1.11863.6.3.1.4.1 | ScalarScheduleStatus | read-only | current | Reboot Schedule Status |
| 1.3.6.1.4.1.11863.6.3.1.4.2 | ScalarScheduleIn | read-create | current | this used to config the reboot schedule time interval |
| 1.3.6.1.4.1.11863.6.3.1.4.3 | ScalarScheduleAt | read-create | current | this used to config the reboot schedule time For example, Saturday Aug 18, 2015 at 08:18 would be given as: 18/08/2015-08:18 |
| 1.3.6.1.4.1.11863.6.3.1.4.4 | ScalarSaveBeforeReboot | read-create | current | Save the user config before reboot |
| 1.3.6.1.4.1.11863.6.3.1.4.5 | ScalarScheduleCancel | read-create | current | Cancel the reboot schedule |
| 1.3.6.1.4.1.11863.6.3.1.5 | NodetpSysToolFirmwareUpgrade | |||
| 1.3.6.1.4.1.11863.6.3.1.5.1 | ScalarfirmwareUpgradeIpAddress | read-write | current | IP Address of the TFTP server.Both IPv4 and IPv6 addresses are supported,for example 192.168.0.146 or fe80::1234. |
| 1.3.6.1.4.1.11863.6.3.1.5.2 | ScalarfirmwareUpgradeFilename | read-write | current | Specify the name for the firmware file. |
| 1.3.6.1.4.1.11863.6.3.1.5.3 | ScalarfirmwareUpgradeSysToolReBoot | read-write | current | this used to determine whether to upgrade the firmware or not |
| 1.3.6.1.4.1.11863.6.3.1.5.4 | ScalarfirmwareUpgradeStatus | read-only | current | If the switch is upgrading or not. |
| 1.3.6.1.4.1.11863.6.3.1.6 | NodetpSysToolBootConfig | |||
| 1.3.6.1.4.1.11863.6.3.1.6.1 | ScalarcurrentStartupImage | read-only | current | Display the current startup image. |
| 1.3.6.1.4.1.11863.6.3.1.6.2 | ScalarnextStartupImage | read-write | current | Select the next startup image. |
| 1.3.6.1.4.1.11863.6.3.1.6.3 | ScalarbackupImage | read-write | current | Select the backup image. |
| 1.3.6.1.4.1.11863.6.3.1.6.4 | ScalarcurrentStartupConfig | read-only | current | Display the current startup config. |
| 1.3.6.1.4.1.11863.6.3.1.6.5 | ScalarnextStartupConfig | read-write | current | Select the next startup config. |
| 1.3.6.1.4.1.11863.6.3.1.6.6 | ScalarbackupConfig | read-write | current | Select the backup config. |
| 1.3.6.1.4.1.11863.6.3.1.7 | NodetpSysToolBackupConfig | |||
| 1.3.6.1.4.1.11863.6.3.1.7.1 | ScalarbackupConfigIpAddress | read-write | current | IP Address of the TFTP server.Both IPv4 and IPv6 addresses are supported,for example 192.168.0.146 or fe80::1234. |
| 1.3.6.1.4.1.11863.6.3.1.7.2 | ScalarbackupConfigFilename | read-write | current | Specify the name for the backup-config file. |
| 1.3.6.1.4.1.11863.6.3.1.7.3 | ScalarbackupConfigStatus | read-only | current | If the current startup configuration file is existed or not. |
| 1.3.6.1.4.1.11863.6.3.1.7.4 | ScalarbackupConfigExport | read-write | current | Export current startup configuration file. |
| 1.3.6.1.4.1.11863.6.3.1.8 | NodetpSysToolRestoreConfig | |||
| 1.3.6.1.4.1.11863.6.3.1.8.1 | ScalarrestoreConfigIpAddress | read-write | current | IP Address of the TFTP server.Both IPv4 and IPv6 addresses are supported,for example 192.168.0.146 or fe80::1234. |
| 1.3.6.1.4.1.11863.6.3.1.8.2 | ScalarrestoreConfigFilename | read-write | current | Specify the name of configuration file. |
| 1.3.6.1.4.1.11863.6.3.1.8.3 | ScalarrestoreConfigStatus | read-only | current | If the system is storing configuration file or not. |
| 1.3.6.1.4.1.11863.6.3.1.8.4 | ScalarrestoreConfigImport | read-write | current | Import specify configuration file. |
| 1.3.6.1.4.1.11863.6.3.2 | NodetplinkSysToolNotifications | |||
| 1.3.6.1.4.1.11863.6.3.2.1 | Notificationflash | current | A flash notification is sented when the flash has been modified. | |
| 1.3.6.1.4.1.11863.6.3.2.2 | Notificationpower | current | A power notification is sented when the Redundant Power Supply or the Power Supply Module status changed. | |
| 1.3.6.1.4.1.11863.6.3.2.3 | Notificationfan | current | A fan notification is sented when the Fan working mode or status changed. | |
| 1.3.6.1.4.1.11863.6.3.2.4 | Notificationtemperature | current | A temperature notification is sented when the temperature alarm happens or cancels. | |
| 1.3.6.1.4.1.11863.6.3.2.5 | NotificationmCard | current | A mCard notification is sented when the mCard is inserted or removed. |