TPLINK-VOICEVLAN-MIB
23 objects
Private MIB for voice vlan configuration.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| TPLINK-MIB | tplinkMgmt |
| TPLINK-TC-MIB | TPRowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11863.6.19 | IdentitytplinkVoiceVlanMIB | Private MIB for voice vlan configuration. | ||
| 1.3.6.1.4.1.11863.6.19.1 | NodetplinkVoiceVlanMIBObjects | |||
| 1.3.6.1.4.1.11863.6.19.1.1 | NodevoiceVlanGlobalConfig | |||
| 1.3.6.1.4.1.11863.6.19.1.1.1 | ScalarvoiceVlanGlobalEnable | read-write | current | Select Enable/Disable Voice VLAN function. 0. disable 1. enable |
| 1.3.6.1.4.1.11863.6.19.1.1.2 | ScalarvoiceVlanId | read-write | current | Enter the VLAN ID of the voice VLAN,2-4094. |
| 1.3.6.1.4.1.11863.6.19.1.1.3 | ScalarvoiceVlanAgingTime | read-write | current | Specifies the living time of the member port in auto mode after the OUI address is aging out,1-43200 minute. |
| 1.3.6.1.4.1.11863.6.19.1.1.4 | ScalarvoiceVlanPriority | read-write | current | Select the priority of the port when sending voice data. 0. Cos0 1. Cos1 2. Cos2 3. Cos3 4. Cos4 5. Cos5 6. Cos6 7. Cos7 |
| 1.3.6.1.4.1.11863.6.19.1.2 | NodevoiceVlanPortConfig | |||
| 1.3.6.1.4.1.11863.6.19.1.2.1 | TablevoiceVlanPortTable | not-accessible | current | Here you can configure the parameters of the ports in the voice VLAN.. |
| 1.3.6.1.4.1.11863.6.19.1.2.1.1 | RowvoiceVlanPortEntry | not-accessible | current | An entry contains of the information of port param. |
| 1.3.6.1.4.1.11863.6.19.1.2.1.1.1 | ColumnvoiceVlanPortNumber | read-only | current | Displays the port number of the Switch. |
| 1.3.6.1.4.1.11863.6.19.1.2.1.1.2 | ColumnvoiceVlanPortMode | read-write | current | Select the mode for the port to join the voice VLAN. 0. manual: In this mode, you can manually add a port to the voice VLAN or remove a port from the voice VLA… |
| 1.3.6.1.4.1.11863.6.19.1.2.1.1.3 | ColumnvoiceVlanPortSecurity | read-write | current | Configure the security mode for forwarding packets. 0. disable:All packets are forwarded. 1. enable:Only voice data are forwarded. |
| 1.3.6.1.4.1.11863.6.19.1.2.1.1.4 | ColumnvoiceVlanPortStatus | read-only | current | Displays the state of the port in the current voice VLAN. 0. inactive 1. active |
| 1.3.6.1.4.1.11863.6.19.1.2.1.1.5 | ColumnvoiceVlanPortLag | read-only | current | Displays the LAG number which the port belongs to. |
| 1.3.6.1.4.1.11863.6.19.1.3 | NodevoiceVlanOuiConfig | |||
| 1.3.6.1.4.1.11863.6.19.1.3.1 | TablevoiceVlanOuiConfigTable | not-accessible | current | The switch determines whether a received packet is a voice packet by checking its source MAC address. If the source MAC addresses of packets comply with the OU… |
| 1.3.6.1.4.1.11863.6.19.1.3.1.1 | RowvoiceVlanOuiConfigEntry | not-accessible | current | An entry contains of the information of a voice vlan oui. |
| 1.3.6.1.4.1.11863.6.19.1.3.1.1.1 | ColumnvoiceVlanOui | read-create | current | Enter the OUI address of the voice device. |
| 1.3.6.1.4.1.11863.6.19.1.3.1.1.2 | ColumnvoiceVlanOuiMask | read-create | current | Enter the OUI address mask of the voice device. |
| 1.3.6.1.4.1.11863.6.19.1.3.1.1.3 | ColumnvoiceVlanDescription | read-create | current | Give a description to the OUI for identification,1-16 characters. |
| 1.3.6.1.4.1.11863.6.19.1.3.1.1.4 | ColumnvoiceVlanRowStatus | read-create | current | the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, bu… |
| 1.3.6.1.4.1.11863.6.19.2 | NodetplinkVoiceVlanMIBNotifications |