TRANGO-APEX-RF-MIB
43 objects
No module-level DESCRIPTION found.
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE |
| SNMPv2-TC | DisplayString |
| TRANGO-APEX-MIB | apex MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5454.1.60.3 | Noderf | |||
| 1.3.6.1.4.1.5454.1.60.3.1 | Nodeatpc | |||
| 1.3.6.1.4.1.5454.1.60.3.1.1 | ScalarrfATPCEnable | read-write | current | Enable/Disable Automatic Transmit Power Control |
| 1.3.6.1.4.1.5454.1.60.3.1.2 | ScalarrfATPCMaxPower | read-write | current | Maximum ATPC power |
| 1.3.6.1.4.1.5454.1.60.3.1.3 | ScalarrfATPCStepSize | read-write | current | ATPC step size for each of the increment/decrement |
| 1.3.6.1.4.1.5454.1.60.3.2 | Nodetxfreq | |||
| 1.3.6.1.4.1.5454.1.60.3.2.1 | ScalarrfTxFrequency | read-write | current | Set/Display the current TX frequency |
| 1.3.6.1.4.1.5454.1.60.3.2.2 | ScalarrfTxFrequencyInt | read-write | current | Set/Display the current TX frequency in integer |
| 1.3.6.1.4.1.5454.1.60.3.3 | Noderxfreq | |||
| 1.3.6.1.4.1.5454.1.60.3.3.1 | ScalarrfRxFrequency | read-only | current | Display the current RX frequency |
| 1.3.6.1.4.1.5454.1.60.3.3.2 | ScalarrfRxFrequencyInt | read-only | current | Display the current RX frequency in integer |
| 1.3.6.1.4.1.5454.1.60.3.4 | Nodespeed | |||
| 1.3.6.1.4.1.5454.1.60.3.4.1 | ScalarrfSymrate | read-only | current | Set/Display the current Symbol Rate |
| 1.3.6.1.4.1.5454.1.60.3.4.2 | ScalarrfModulation | read-write | current | Set/Display the current modulation |
| 1.3.6.1.4.1.5454.1.60.3.4.3 | ScalarrfBPF | read-only | current | Display the current bandpass filter value |
| 1.3.6.1.4.1.5454.1.60.3.4.4 | ScalarrfChannelWidth | read-write | current | Display the current channel width |
| 1.3.6.1.4.1.5454.1.60.3.5 | Nodepower | |||
| 1.3.6.1.4.1.5454.1.60.3.5.1 | ScalarrfPower | read-write | current | Set/Display the current power |
| 1.3.6.1.4.1.5454.1.60.3.5.2 | ScalarrfPowerInt | read-write | current | Set/Display the current power in integer |
| 1.3.6.1.4.1.5454.1.60.3.6 | ScalarrfRSSILEDEnable | read-write | current | Enable/Disable ODU LED display for RSSI |
| 1.3.6.1.4.1.5454.1.60.3.7 | ScalarrfTemp | read-only | current | Read current system Temperature |
| 1.3.6.1.4.1.5454.1.60.3.8 | Nodetarget | |||
| 1.3.6.1.4.1.5454.1.60.3.8.1 | ScalarrfTargetRSSI | read-write | current | Set/Disable the current Target RSSI value in float value |
| 1.3.6.1.4.1.5454.1.60.3.8.2 | ScalarrfTargetRSSIInt | read-write | current | Set/Disable the current Target RSSI value in integer |
| 1.3.6.1.4.1.5454.1.60.3.9 | Noderssi | |||
| 1.3.6.1.4.1.5454.1.60.3.9.1 | ScalarrfRSSI | read-only | current | Read current RSSI value |
| 1.3.6.1.4.1.5454.1.60.3.9.2 | ScalarrfRSSIInt | read-only | current | Read current RSSI value in Integer |
| 1.3.6.1.4.1.5454.1.60.3.10 | NoderfPll | |||
| 1.3.6.1.4.1.5454.1.60.3.10.1 | ScalarrfRFMRFpll | read-only | current | RFM RX PLL lock status |
| 1.3.6.1.4.1.5454.1.60.3.10.2 | ScalarrfRFMIFpll | read-only | current | RFM RX PLL lock status |
| 1.3.6.1.4.1.5454.1.60.3.10.3 | ScalarrfTransmitPll | read-only | current | Transmit PLL lock status |
| 1.3.6.1.4.1.5454.1.60.3.10.4 | ScalarrfReceviedPll | read-only | current | Loopback PLL lock status |
| 1.3.6.1.4.1.5454.1.60.3.11 | NoderfIn | |||
| 1.3.6.1.4.1.5454.1.60.3.11.1 | ScalarrfInDataOctets | read-only | current | Display total number of incoming Octets in FPGA |
| 1.3.6.1.4.1.5454.1.60.3.11.2 | ScalarrfInDataPackets | read-only | current | Display total number of incoming Packets in FPGA |
| 1.3.6.1.4.1.5454.1.60.3.11.3 | ScalarrfInDropPackets | read-only | current | Display total number of Ethernet drop packets goes in toFPGA |
| 1.3.6.1.4.1.5454.1.60.3.11.4 | ScalarrfInPortUtil | read-only | current | Display current in port utilizaition percentage |
| 1.3.6.1.4.1.5454.1.60.3.11.5 | ScalarrfInPortRate | read-only | current | Display current in port rate |
| 1.3.6.1.4.1.5454.1.60.3.12 | NoderfOut | |||
| 1.3.6.1.4.1.5454.1.60.3.12.1 | ScalarrfOutDataOctets | read-only | current | Display total number of outgoing Octets in FPGA |
| 1.3.6.1.4.1.5454.1.60.3.12.2 | ScalarrfOutDataPackets | read-only | current | Display total number of outgoing Packets in FPGA |
| 1.3.6.1.4.1.5454.1.60.3.12.3 | ScalarrfOutPortUtil | read-only | current | Display current out port utilizaition percentage |
| 1.3.6.1.4.1.5454.1.60.3.12.4 | ScalarrfOutPortRate | read-only | current | Display current out port rate |