TRANGOP5830S-MU-MIB
92 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5454 | Nodetrango | |||
| 1.3.6.1.4.1.5454.1 | Nodetbw | |||
| 1.3.6.1.4.1.5454.1.22 | Nodep5830smu | |||
| 1.3.6.1.4.1.5454.1.22.1 | Nodemusys | |||
| 1.3.6.1.4.1.5454.1.22.1.1 | Nodemuversion | |||
| 1.3.6.1.4.1.5454.1.22.1.1.1 | ScalarmuversionHW | read-only | mandatory | Hardware version. |
| 1.3.6.1.4.1.5454.1.22.1.1.2 | ScalarmuversionFW | read-only | mandatory | Main firmware version. Format: <code version>H<hardware version>D<date>. |
| 1.3.6.1.4.1.5454.1.22.1.1.3 | ScalarmuversionFPGA | read-only | mandatory | FPGA firmware version. |
| 1.3.6.1.4.1.5454.1.22.1.1.4 | ScalarmuversionFWChecksum | read-only | mandatory | Master unit firmware checksum. |
| 1.3.6.1.4.1.5454.1.22.1.1.5 | ScalarmuversionFPGAChecksum | read-only | mandatory | Master unit FPGA checksum. |
| 1.3.6.1.4.1.5454.1.22.1.2 | ScalarmusysDeviceId | read-only | mandatory | Master unit device Id. Each master unit in a cluster shall have unique ID. |
| 1.3.6.1.4.1.5454.1.22.1.3 | ScalarmusysDefOpMode | read-write | mandatory | The operation mode (on or off) the master unit is on after reboot/power cycle. |
| 1.3.6.1.4.1.5454.1.22.1.4 | ScalarmusysCurOpMode | read-only | mandatory | Master unit's current operation mode. |
| 1.3.6.1.4.1.5454.1.22.1.5 | ScalarmusysActivateOpmode | read-write | mandatory | Engage master unit to on operation mode. |
| 1.3.6.1.4.1.5454.1.22.1.6 | ScalarmusysReadCommStr | read-write | mandatory | SNMP agent read community string. It is used for authentication purpose. |
| 1.3.6.1.4.1.5454.1.22.1.7 | ScalarmusysWriteCommStr | read-write | mandatory | SNMP agent write community string. It is used for authentication purpose. |
| 1.3.6.1.4.1.5454.1.22.1.8 | Nodemuswitches | |||
| 1.3.6.1.4.1.5454.1.22.1.8.1 | ScalarmuswitchesBlockBroadcastMulticast | read-write | mandatory | This switch enables or disables the blocking of Ethernet control packet except ICMP and ARP to reduce the amount of uneccessary overhead introduced to the wire… |
| 1.3.6.1.4.1.5454.1.22.1.8.5 | ScalarmuswitchesHTTPD | read-write | mandatory | When it is turned on, then the master unit is accessible for configuring via web browser (e.g. IE or Nescape). |
| 1.3.6.1.4.1.5454.1.22.1.8.7 | ScalarmuswitchesAutoPowerLevelRemoteUnit | read-write | mandatory | When it is turned on, then the master unit will command the remote unit to do power leveling. |
| 1.3.6.1.4.1.5454.1.22.1.9 | Nodemutraffic | |||
| 1.3.6.1.4.1.5454.1.22.1.9.1 | ScalarmutrafficEthInOctets | read-only | mandatory | Number of payload octets received on Ethernet port. |
| 1.3.6.1.4.1.5454.1.22.1.9.2 | ScalarmutrafficEthOutOctets | read-only | mandatory | Number of payload octets transmitted on Ethernet port. |
| 1.3.6.1.4.1.5454.1.22.1.9.3 | ScalarmutrafficRfInOctets | read-only | mandatory | Number of octets of remote's payload received from RF port. |
| 1.3.6.1.4.1.5454.1.22.1.9.4 | ScalarmutrafficRfOutOctets | read-only | mandatory | Number of octets of remote's payload transmitted to RF port. |
| 1.3.6.1.4.1.5454.1.22.1.10 | ScalarmusysTemperature | read-only | mandatory | Current master unit's temperature value (in Celsius). |
| 1.3.6.1.4.1.5454.1.22.1.11 | ScalarmusysUpdateFlashAndActivate | read-write | mandatory | Save system setting values to Flash and activate the settings. |
| 1.3.6.1.4.1.5454.1.22.1.12 | ScalarmusysReboot | read-write | mandatory | Reboot the master unit. |
| 1.3.6.1.4.1.5454.1.22.1.13 | Nodemuipconfig | |||
| 1.3.6.1.4.1.5454.1.22.1.13.1 | ScalarmuipconfigIpAddress | read-write | mandatory | New IP address. It will be saved to non-volatile memory and activated in 5 secs. |
| 1.3.6.1.4.1.5454.1.22.1.13.2 | ScalarmuipconfigSubnet | read-write | mandatory | New Subnet mask. It will be saved to non-volatile memory and activated in 5 secs. |
| 1.3.6.1.4.1.5454.1.22.1.13.3 | ScalarmuipconfigDefaultGateway | read-write | mandatory | New Default gateway. It will be saved to non-volatile memory and activated in 5 secs. |
| 1.3.6.1.4.1.5454.1.22.2 | Nodemurf | |||
| 1.3.6.1.4.1.5454.1.22.2.1 | ScalarmurfRSSI | read-only | mandatory | Remote unit RSSI (in dBm). |
| 1.3.6.1.4.1.5454.1.22.2.2 | ScalarmurfActiveChannel | read-write | mandatory | It specifies the current channel number the master unit operates on. |
| 1.3.6.1.4.1.5454.1.22.2.3 | ScalarmurfActivePolarization | read-write | mandatory | It specifies the current polarization the master unit operates on. |
| 1.3.6.1.4.1.5454.1.22.2.4 | Nodemurftable | |||
| 1.3.6.1.4.1.5454.1.22.2.4.1 | ScalarmurftableChannel1 | read-write | mandatory | RF channel 1 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel w… |
| 1.3.6.1.4.1.5454.1.22.2.4.2 | ScalarmurftableChannel2 | read-write | mandatory | RF channel 2 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel w… |
| 1.3.6.1.4.1.5454.1.22.2.4.3 | ScalarmurftableChannel3 | read-write | mandatory | RF channel 3 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel w… |
| 1.3.6.1.4.1.5454.1.22.2.4.4 | ScalarmurftableChannel4 | read-write | mandatory | RF channel 4 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel w… |
| 1.3.6.1.4.1.5454.1.22.2.4.5 | ScalarmurftableChannel5 | read-write | mandatory | RF channel 5 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel w… |
| 1.3.6.1.4.1.5454.1.22.2.4.6 | ScalarmurftableChannel6 | read-write | mandatory | RF channel 6 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel w… |
| 1.3.6.1.4.1.5454.1.22.2.4.7 | ScalarmurftableChannel7 | read-write | mandatory | RF channel 7 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel w… |
| 1.3.6.1.4.1.5454.1.22.2.4.8 | ScalarmurftableChannel8 | read-write | mandatory | RF channel 8 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel w… |
| 1.3.6.1.4.1.5454.1.22.2.4.9 | ScalarmurftableChannel9 | read-write | mandatory | RF channel 9 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel w… |
| 1.3.6.1.4.1.5454.1.22.2.4.10 | ScalarmurftableChannel10 | read-write | mandatory | RF channel 10 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.22.2.4.11 | ScalarmurftableChannel11 | read-write | mandatory | RF channel 11 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.22.2.4.12 | ScalarmurftableChannel12 | read-write | mandatory | RF channel 12 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.22.2.4.13 | ScalarmurftableChannel13 | read-write | mandatory | RF channel 13 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.22.2.4.14 | ScalarmurftableChannel14 | read-write | mandatory | RF channel 14 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.22.2.4.15 | ScalarmurftableChannel15 | read-write | mandatory | RF channel 15 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.22.2.4.16 | ScalarmurftableChannel16 | read-write | mandatory | RF channel 16 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.22.2.4.17 | ScalarmurftableChannel17 | read-write | mandatory | RF channel 17 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.22.2.4.18 | ScalarmurftableChannel18 | read-write | mandatory | RF channel 18 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.22.2.4.19 | ScalarmurftableChannel19 | read-write | mandatory | RF channel 19 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.22.2.4.20 | ScalarmurftableChannel20 | read-write | mandatory | RF channel 20 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.22.2.4.21 | ScalarmurftableChannel21 | read-write | mandatory | RF channel 21 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.22.2.4.22 | ScalarmurftableChannel22 | read-write | mandatory | RF channel 22 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.22.2.4.23 | ScalarmurftableChannel23 | read-write | mandatory | RF channel 23 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.22.2.4.24 | ScalarmurftableChannel24 | read-write | mandatory | RF channel 24 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.22.2.4.25 | ScalarmurftableChannel25 | read-write | mandatory | RF channel 25 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.22.2.4.26 | ScalarmurftableChannel26 | read-write | mandatory | RF channel 26 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.22.2.4.27 | ScalarmurftableChannel27 | read-write | mandatory | RF channel 27 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.22.2.4.28 | ScalarmurftableChannel28 | read-write | mandatory | RF channel 28 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.22.2.4.29 | ScalarmurftableChannel29 | read-write | mandatory | RF channel 29 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.22.2.4.30 | ScalarmurftableChannel30 | read-write | mandatory | RF channel 30 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.22.2.5 | Nodemuism | |||
| 1.3.6.1.4.1.5454.1.22.2.5.1 | ScalarmuismTxPowerMax | read-only | mandatory | The maximum ISM Tx power value can be set (in dBm). |
| 1.3.6.1.4.1.5454.1.22.2.5.2 | ScalarmuismTxPowerMin | read-only | mandatory | The minimum ISM Tx power value can be set (in dBm). |
| 1.3.6.1.4.1.5454.1.22.2.5.3 | ScalarmuismTxPower | read-write | mandatory | ISM RF tx power (in dBm). It specifies the power output of the radio, excluding the antenna gain. Check parameters muismTxPowerMax and masterismTxPowerMin for … |
| 1.3.6.1.4.1.5454.1.22.2.5.4 | ScalarmuismRxThreshold | read-write | mandatory | ISM RF rx threshold (in dBm). It specifies the receiver sensitivity of the master. By default, the radio's sensitivity is -82dBm. The higher the threshold is, … |
| 1.3.6.1.4.1.5454.1.22.2.5.5 | ScalarmuismTargetRSSI | read-write | mandatory | ISM RF RSSI (in dBm). It specifies the target RSSI from the remote unit to the master unit. Based on this parameter, the master unit can power level the remote… |
| 1.3.6.1.4.1.5454.1.22.2.6 | Nodemuunii | |||
| 1.3.6.1.4.1.5454.1.22.2.6.1 | ScalarmuuniiTxPowerMax | read-only | mandatory | This object is only applicable to M5830S/P5830S radio. The maximum UNII Tx power value can be set (in dBm). |
| 1.3.6.1.4.1.5454.1.22.2.6.2 | ScalarmuuniiTxPowerMin | read-only | mandatory | This object is only applicable to M5830S/P5830S radio. The minimum UNII Tx power value can be set (in dBm). |
| 1.3.6.1.4.1.5454.1.22.2.6.3 | ScalarmuuniiTxPower | read-write | mandatory | This object is only applicable to M5830S/P5830S radio. UNII RF tx power (in dBm). It specifies the power output of the radio, excluding the antenna gain. Check… |
| 1.3.6.1.4.1.5454.1.22.2.6.4 | ScalarmuuniiRxThreshold | read-write | mandatory | This object is only applicable to M5830S/P5830S radio. UNII RF rx threshold (in dBm). It specifies the receiver sensitivity of the master. |
| 1.3.6.1.4.1.5454.1.22.2.6.5 | ScalarmuuniiTargetRSSI | read-write | mandatory | This object is only applicable to M5830S/P5830S radio. UNII RF target RSSI (in dBm). It specifies the target RSSI from remote unit to the master unit. Based on… |
| 1.3.6.1.4.1.5454.1.22.3 | Noderu | |||
| 1.3.6.1.4.1.5454.1.22.3.1 | ScalarruDeviceId | read-write | mandatory | Remote unit device ID. |
| 1.3.6.1.4.1.5454.1.22.3.2 | ScalarruUpstreamMIR | read-write | mandatory | It is the Maximum Information Rate (in Kbps) the master unit allocates to remote unit. |
| 1.3.6.1.4.1.5454.1.22.3.3 | ScalarremoteDownstreamMIR | read-write | mandatory | It is the Maximum Information Rate (in Kbps) the master unit allocates to the remote unit. |
| 1.3.6.1.4.1.5454.1.22.3.4 | ScalarruPowerLvl | read-write | mandatory | It is a feature that is typically found in more elaborate mobile systems such as cellular CDMA networks. Using this feature, the remote unit have its RF power … |
| 1.3.6.1.4.1.5454.1.22.3.5 | ScalarruReboot | read-write | mandatory | Master unit issues reboot command to remote unit. |
| 1.3.6.1.4.1.5454.1.22.3.6 | ScalarruAssociation | read-only | mandatory | Remote unit association status. |
| 1.3.6.1.4.1.5454.1.22.3.7 | ScalarruDistance | read-only | mandatory | Distance of remote unit (in mile). |
| 1.3.6.1.4.1.5454.1.22.4 | Nodetrapconfig | |||
| 1.3.6.1.4.1.5454.1.22.4.2 | ScalartrapconfigDest1IPAddress | read-write | mandatory | Trap destination 1 IP address. |
| 1.3.6.1.4.1.5454.1.22.4.3 | ScalartrapconfigDest2IPAddress | read-write | mandatory | Trap destination 2 IP address. |
| 1.3.6.1.4.1.5454.1.22.5 | Nodemibinfo | |||
| 1.3.6.1.4.1.5454.1.22.5.1 | ScalarmibinfoVersion | read-only | mandatory | Trango master unit MIB Version. |