TRANGOP5830S-RU-MIB
77 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5454 | Nodetrango | |||
| 1.3.6.1.4.1.5454.1 | Nodetbw | |||
| 1.3.6.1.4.1.5454.1.24 | Nodep5830sru | |||
| 1.3.6.1.4.1.5454.1.24.1 | Noderusys | |||
| 1.3.6.1.4.1.5454.1.24.1.1 | Noderuversion | |||
| 1.3.6.1.4.1.5454.1.24.1.1.1 | ScalarruversionHW | read-only | mandatory | Hardware version. |
| 1.3.6.1.4.1.5454.1.24.1.1.2 | ScalarruversionFW | read-only | mandatory | Main firmware version. Format: <code version>H<hardware version>D<date>. |
| 1.3.6.1.4.1.5454.1.24.1.1.3 | ScalarruversionFPGA | read-only | mandatory | FPGA firmware version. |
| 1.3.6.1.4.1.5454.1.24.1.1.4 | ScalarruversionFWChecksum | read-only | mandatory | Remote unit firmware checksum. |
| 1.3.6.1.4.1.5454.1.24.1.1.5 | ScalarruversionFPGAChecksum | read-only | mandatory | Remote unit FPGA checksum. |
| 1.3.6.1.4.1.5454.1.24.1.2 | ScalarrusysDeviceId | read-only | mandatory | Remote unit device Id. Each remote unit in a cluster shall have unique ID. |
| 1.3.6.1.4.1.5454.1.24.1.3 | ScalarrusysDefOpMode | read-write | mandatory | The operation mode (on or off) the remote unit is on after reboot/power cycle. |
| 1.3.6.1.4.1.5454.1.24.1.4 | ScalarrusysCurOpMode | read-only | mandatory | Remote unit's current operation mode. |
| 1.3.6.1.4.1.5454.1.24.1.5 | ScalarrusysActivateOpmode | read-write | mandatory | Engage remote unit to on operation mode. |
| 1.3.6.1.4.1.5454.1.24.1.6 | ScalarrusysReadCommStr | read-write | mandatory | SNMP agent read community string. It is used for authenticcation purpose. |
| 1.3.6.1.4.1.5454.1.24.1.7 | ScalarrusysWriteCommStr | read-write | mandatory | SNMP agent write community string. It is used for authentication purpose. |
| 1.3.6.1.4.1.5454.1.24.1.8 | Noderuswitches | |||
| 1.3.6.1.4.1.5454.1.24.1.8.1 | ScalarruswitchesBlockBroadcastMulticast | read-write | mandatory | This switch enables or disables the blocking of Ethernet control packet except ICMP and ARP to reduce the amount of uneccessary overhead introduced to the wire… |
| 1.3.6.1.4.1.5454.1.24.1.8.5 | ScalarruswitchesHTTPD | read-write | mandatory | When it is turned on, then the remote unit is accessible for configuring via web browser (e.g. IE or Nescape). |
| 1.3.6.1.4.1.5454.1.24.1.8.6 | ScalarruswitchesAutoScanMasterSignal | read-write | mandatory | This switch enables or disables the auto scan master unit signal operation on the remote unit only. |
| 1.3.6.1.4.1.5454.1.24.1.9 | Noderutraffic | |||
| 1.3.6.1.4.1.5454.1.24.1.9.1 | ScalarrutrafficEthInOctets | read-only | mandatory | Number of octets of remote unit's payload received on Ethernet port. |
| 1.3.6.1.4.1.5454.1.24.1.9.2 | ScalarrutrafficEthOutOctets | read-only | mandatory | Number of octets of remote unit's payload transmitted on Ethernet port. |
| 1.3.6.1.4.1.5454.1.24.1.9.3 | ScalarrutrafficRfInOctets | read-only | mandatory | Number of octets of remote unit's payload received from RF port. |
| 1.3.6.1.4.1.5454.1.24.1.9.4 | ScalarrutrafficRfOutOctets | read-only | mandatory | Number of octets of remote unit's payload transmitted to RF port. |
| 1.3.6.1.4.1.5454.1.24.1.10 | ScalarrusysTemperature | read-only | mandatory | Current remote unit temperature value (in Celsius). |
| 1.3.6.1.4.1.5454.1.24.1.11 | ScalarrusysUpdateFlashAndActivate | read-write | mandatory | Save system setting values to Flash and activate the settings. |
| 1.3.6.1.4.1.5454.1.24.1.12 | ScalarrusysReboot | read-write | mandatory | Reboot the remote unit. |
| 1.3.6.1.4.1.5454.1.24.1.13 | Noderuipconfig | |||
| 1.3.6.1.4.1.5454.1.24.1.13.1 | ScalarruipconfigIpAddress | read-write | mandatory | New IP address. It will be saved to non-volatile memory and activated in 5 secs. |
| 1.3.6.1.4.1.5454.1.24.1.13.2 | ScalarruipconfigSubnet | read-write | mandatory | New Subnet mask. It will be saved to non-volatile memory and activated in 5 secs. |
| 1.3.6.1.4.1.5454.1.24.1.13.3 | ScalarruipconfigDefaultGateway | read-write | mandatory | New Default gateway. It will be saved to non-volatile memory and activated in 5 secs. |
| 1.3.6.1.4.1.5454.1.24.2 | Noderurf | |||
| 1.3.6.1.4.1.5454.1.24.2.1 | ScalarrurfRSSI | read-only | mandatory | Remote unit RSSI (in dBm). |
| 1.3.6.1.4.1.5454.1.24.2.4 | Noderurftable | |||
| 1.3.6.1.4.1.5454.1.24.2.4.1 | ScalarrurftableChannel1 | read-write | mandatory | RF channel 1 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel w… |
| 1.3.6.1.4.1.5454.1.24.2.4.2 | ScalarrurftableChannel2 | read-write | mandatory | RF channel 2 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel w… |
| 1.3.6.1.4.1.5454.1.24.2.4.3 | ScalarrurftableChannel3 | read-write | mandatory | RF channel 3 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel w… |
| 1.3.6.1.4.1.5454.1.24.2.4.4 | ScalarrurftableChannel4 | read-write | mandatory | RF channel 4 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel w… |
| 1.3.6.1.4.1.5454.1.24.2.4.5 | ScalarrurftableChannel5 | read-write | mandatory | RF channel 5 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel w… |
| 1.3.6.1.4.1.5454.1.24.2.4.6 | ScalarrurftableChannel6 | read-write | mandatory | RF channel 6 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel w… |
| 1.3.6.1.4.1.5454.1.24.2.4.7 | ScalarrurftableChannel7 | read-write | mandatory | RF channel 7 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel w… |
| 1.3.6.1.4.1.5454.1.24.2.4.8 | ScalarrurftableChannel8 | read-write | mandatory | RF channel 8 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel w… |
| 1.3.6.1.4.1.5454.1.24.2.4.9 | ScalarrurftableChannel9 | read-write | mandatory | RF channel 9 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel w… |
| 1.3.6.1.4.1.5454.1.24.2.4.10 | ScalarrurftableChannel10 | read-write | mandatory | RF channel 10 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.24.2.4.11 | ScalarrurftableChannel11 | read-write | mandatory | RF channel 11 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.24.2.4.12 | ScalarrurftableChannel12 | read-write | mandatory | RF channel 12 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.24.2.4.13 | ScalarrurftableChannel13 | read-write | mandatory | RF channel 13 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.24.2.4.14 | ScalarrurftableChannel14 | read-write | mandatory | RF channel 14 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.24.2.4.15 | ScalarrurftableChannel15 | read-write | mandatory | RF channel 15 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.24.2.4.16 | ScalarrurftableChannel16 | read-write | mandatory | RF channel 16 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.24.2.4.17 | ScalarrurftableChannel17 | read-write | mandatory | RF channel 17 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.24.2.4.18 | ScalarrurftableChannel18 | read-write | mandatory | RF channel 18 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.24.2.4.19 | ScalarrurftableChannel19 | read-write | mandatory | RF channel 19 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.24.2.4.20 | ScalarrurftableChannel20 | read-write | mandatory | RF channel 20 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.24.2.4.21 | ScalarrurftableChannel21 | read-write | mandatory | RF channel 21 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.24.2.4.22 | ScalarrurftableChannel22 | read-write | mandatory | RF channel 22 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.24.2.4.23 | ScalarrurftableChannel23 | read-write | mandatory | RF channel 23 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.24.2.4.24 | ScalarrurftableChannel24 | read-write | mandatory | RF channel 24 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.24.2.4.25 | ScalarrurftableChannel25 | read-write | mandatory | RF channel 25 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.24.2.4.26 | ScalarrurftableChannel26 | read-write | mandatory | RF channel 26 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.24.2.4.27 | ScalarrurftableChannel27 | read-write | mandatory | RF channel 27 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.24.2.4.28 | ScalarrurftableChannel28 | read-write | mandatory | RF channel 28 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.24.2.4.29 | ScalarrurftableChannel29 | read-write | mandatory | RF channel 29 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.24.2.4.30 | ScalarrurftableChannel30 | read-write | mandatory | RF channel 30 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel … |
| 1.3.6.1.4.1.5454.1.24.2.5 | Noderuism | |||
| 1.3.6.1.4.1.5454.1.24.2.5.1 | ScalarruismTxPowerMax | read-only | mandatory | The maximum ISM Tx power value can be set (in dBm). |
| 1.3.6.1.4.1.5454.1.24.2.5.2 | ScalarruismTxPowerMin | read-only | mandatory | The minimum ISM Tx power value can be set (in dBm). |
| 1.3.6.1.4.1.5454.1.24.2.5.3 | ScalarruismTxPower | read-write | mandatory | ISM RF tx power (in dBm). It specifies the power output of the radio, excluding the antenna gain. Check parameters remoteismTxPowerMax and remoteismTxPowerMin … |
| 1.3.6.1.4.1.5454.1.24.2.5.4 | ScalarruismRxThreshold | read-write | mandatory | ISM RF rx threshold (in dBm). It specifies the receiver sensitivity of the remote. By default, the radio's sensitivity is -82dBm. The higher the threshold is, … |
| 1.3.6.1.4.1.5454.1.24.2.6 | Noderuunii | |||
| 1.3.6.1.4.1.5454.1.24.2.6.1 | ScalarruuniiTxPowerMax | read-only | mandatory | This object is only applicable to M5830S/P5830S radio. The maximum UNII Tx power value can be set (in dBm). |
| 1.3.6.1.4.1.5454.1.24.2.6.2 | ScalarruuniiTxPowerMin | read-only | mandatory | This object is only applicable to M5830S/P5830S radio. The minimum UNII Tx power value can be set (in dBm). |
| 1.3.6.1.4.1.5454.1.24.2.6.3 | ScalarruuniiTxPower | read-write | mandatory | This object is only applicable to M5830S/P5830S radio. UNII RF tx power (in dBm). It specifies the power output of the radio, excluding the antenna gain. Check… |
| 1.3.6.1.4.1.5454.1.24.2.6.4 | ScalarruuniiRxThreshold | read-write | mandatory | This object is only applicable to M5830S/P5830S radio. UNII RF rx threshold (in dBm). It specifies the receiver sensitivity of the master unit. |
| 1.3.6.1.4.1.5454.1.24.5 | Nodemibinfo | |||
| 1.3.6.1.4.1.5454.1.24.5.1 | ScalarmibinfoVersion | read-only | mandatory | Trango remote unit MIB Version. |