TRANZEO-ENROUTE-MUNIWIFI-MIB
952 objects
The Tranzeo EnRoute platform MIB.
Imported Objects
| RFC-1215 | TRAP-TYPE |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.24350 | IdentityenRoute | The Tranzeo EnRoute platform MIB. | ||
| 1.3.6.1.4.1.24350.1 | Nodeversion | |||
| 1.3.6.1.4.1.24350.1.1 | ScalarversionDriver80211 | read-only | current | 80211 driver release version |
| 1.3.6.1.4.1.24350.1.2 | ScalarversionFirmware | read-only | current | firmware release version |
| 1.3.6.1.4.1.24350.1.3 | ScalarversionLoaded-profile | read-only | current | last mcm cfg-load or cfg-save profile |
| 1.3.6.1.4.1.24350.1.4 | ScalarversionMcm | read-only | current | mcm version |
| 1.3.6.1.4.1.24350.1.5 | ScalarversionPatches | read-only | current | applied patches |
| 1.3.6.1.4.1.24350.1.6 | ScalarversionQos | read-only | current | QoS version |
| 1.3.6.1.4.1.24350.1.7 | ScalarversionRelease | read-only | current | software release version |
| 1.3.6.1.4.1.24350.2 | Nodesys | |||
| 1.3.6.1.4.1.24350.2.1 | NodesysApply | |||
| 1.3.6.1.4.1.24350.2.1.1 | ScalarsysApplyEffect | read-only | current | approximate severity of applying outstanding changes |
| 1.3.6.1.4.1.24350.2.1.2 | ScalarsysApplyTime | read-only | current | time in seconds to apply outstanding changes |
| 1.3.6.1.4.1.24350.2.2 | NodesysDev | |||
| 1.3.6.1.4.1.24350.2.2.1 | NodesysDevBattery | |||
| 1.3.6.1.4.1.24350.2.2.1.1 | ScalarsysDevBatteryEnable | read-write | current | enable battery |
| 1.3.6.1.4.1.24350.2.2.1.2 | ScalarsysDevBatteryInstalled | read-only | current | battery hardware could be installed |
| 1.3.6.1.4.1.24350.2.2.2 | NodesysDevLed | |||
| 1.3.6.1.4.1.24350.2.2.2.1 | ScalarsysDevLedEnable | read-write | current | enable led display |
| 1.3.6.1.4.1.24350.2.2.3 | NodesysDevPoe | |||
| 1.3.6.1.4.1.24350.2.2.3.1 | ScalarsysDevPoeEnable | read-write | current | supply power over ethernet |
| 1.3.6.1.4.1.24350.2.2.3.2 | ScalarsysDevPoeInstalled | read-only | current | poe hardware is installed |
| 1.3.6.1.4.1.24350.2.2.3.3 | ScalarsysDevPoeVoltage | read-write | current | power over ethernet voltage - 24 or 48 |
| 1.3.6.1.4.1.24350.2.2.4 | NodesysDevWlan | |||
| 1.3.6.1.4.1.24350.2.2.4.1 | ScalarsysDevWlanCountry | read-write | current | ansi country code - 124=canada, 840=us, 826=uk |
| 1.3.6.1.4.1.24350.2.3 | NodesysDhcp | |||
| 1.3.6.1.4.1.24350.2.3.1 | ScalarsysDhcpArgs | read-only | current | dhcp server arguments |
| 1.3.6.1.4.1.24350.2.3.2 | ScalarsysDhcpEnableserver | read-write | current | enable dhcp server if any of the interfaces require it |
| 1.3.6.1.4.1.24350.2.3.3 | NodesysDhcpRelay | |||
| 1.3.6.1.4.1.24350.2.3.3.1 | NodesysDhcpRelayAgent | |||
| 1.3.6.1.4.1.24350.2.3.3.1.1 | ScalarsysDhcpRelayAgentBase | read-write | current | base octet to use for alias VAP IP addresses |
| 1.3.6.1.4.1.24350.2.3.3.2 | ScalarsysDhcpRelayArgs | read-write | current | roamd arguments except for -D and -a |
| 1.3.6.1.4.1.24350.2.3.3.3 | ScalarsysDhcpRelayArpnumbc | read-write | current | number of unsolicited arp broadcasts to establish ips |
| 1.3.6.1.4.1.24350.2.3.3.4 | ScalarsysDhcpRelayBindretries | read-write | current | number of interface bind attempts |
| 1.3.6.1.4.1.24350.2.3.3.5 | ScalarsysDhcpRelayEnable | read-write | current | use remote dhcp server instead of local |
| 1.3.6.1.4.1.24350.2.3.3.6 | ScalarsysDhcpRelayExtrahosts | read-write | current | space separated list of extra host ip addresses to consider external |
| 1.3.6.1.4.1.24350.2.3.3.7 | ScalarsysDhcpRelayGateway | read-write | current | base address to use VAP IP addresses globally |
| 1.3.6.1.4.1.24350.2.3.3.8 | NodesysDhcpRelayImr | |||
| 1.3.6.1.4.1.24350.2.3.3.8.1 | ScalarsysDhcpRelayImrNumbc | read-write | current | notification broadcast count |
| 1.3.6.1.4.1.24350.2.3.3.9 | ScalarsysDhcpRelayProxy | read-write | current | redirect all dhcp traffic to relay on gateway |
| 1.3.6.1.4.1.24350.2.3.3.10 | ScalarsysDhcpRelayServer | read-write | current | numeric ip address of the external DHCP server |
| 1.3.6.1.4.1.24350.2.3.3.11 | ScalarsysDhcpRelayStalecheckinterval | read-write | current | check for stale route (seconds) |
| 1.3.6.1.4.1.24350.2.3.3.12 | NodesysDhcpRelayStatic | |||
| 1.3.6.1.4.1.24350.2.3.3.12.1 | ScalarsysDhcpRelayStaticBegin | read-write | current | beginning of statif ip range |
| 1.3.6.1.4.1.24350.2.3.3.12.2 | ScalarsysDhcpRelayStaticEnable | read-write | current | allow static allocation range |
| 1.3.6.1.4.1.24350.2.3.3.12.3 | ScalarsysDhcpRelayStaticEnd | read-write | current | end of static ip range |
| 1.3.6.1.4.1.24350.2.3.3.13 | ScalarsysDhcpRelaySubnet | read-write | current | subnet for roamd |
| 1.3.6.1.4.1.24350.2.3.3.14 | NodesysDhcpRelayTunnel | |||
| 1.3.6.1.4.1.24350.2.3.3.14.1 | ScalarsysDhcpRelayTunnelEndpoint | read-write | current | tunnel subnet for roamd |
| 1.3.6.1.4.1.24350.2.3.3.14.2 | ScalarsysDhcpRelayTunnelKeepalive | read-write | current | tunnel keepalive interval in seconds |
| 1.3.6.1.4.1.24350.2.3.3.14.3 | ScalarsysDhcpRelayTunnelTimeoutfactor | read-write | current | tunnel timeout factor |
| 1.3.6.1.4.1.24350.2.4 | NodesysDns | |||
| 1.3.6.1.4.1.24350.2.4.1 | ScalarsysDnsServers | read-write | current | space separated DNS server list |
| 1.3.6.1.4.1.24350.2.4.2 | ScalarsysDnsUpdatestyle | read-write | current | dns update style ('ad-hoc', 'interim', 'none' ) |
| 1.3.6.1.4.1.24350.2.5 | NodesysDnsproxy | |||
| 1.3.6.1.4.1.24350.2.5.1 | ScalarsysDnsproxyEnable | read-write | current | enable dns proxy |
| 1.3.6.1.4.1.24350.2.5.2 | ScalarsysDnsproxyHosts | read-write | current | <hostname>=<ip>;<hostname>=<ip>; (etc) |
| 1.3.6.1.4.1.24350.2.6 | ScalarsysDomain | read-write | current | domain for this node |
| 1.3.6.1.4.1.24350.2.7 | NodesysGui | |||
| 1.3.6.1.4.1.24350.2.7.1 | NodesysGuiUpgrade | |||
| 1.3.6.1.4.1.24350.2.7.1.1 | ScalarsysGuiUpgradeForce | read-write | current | gui defaults to forcing upgrade |
| 1.3.6.1.4.1.24350.2.8 | ScalarsysHostname | read-write | current | hostname (also set if you change id.node) |
| 1.3.6.1.4.1.24350.2.9 | NodesysHosts | |||
| 1.3.6.1.4.1.24350.2.9.1 | ScalarsysHostsNms | read-write | current | hostname or ip address of the network management station (snmp) |
| 1.3.6.1.4.1.24350.2.10 | NodesysId | |||
| 1.3.6.1.4.1.24350.2.10.1 | ScalarsysIdLanprefix | read-write | current | first octet for non-mesh interfaces |
| 1.3.6.1.4.1.24350.2.10.2 | ScalarsysIdMesh | read-write | current | 3rd mesh octet (2nd octet for other interfaces in implicit mode) |
| 1.3.6.1.4.1.24350.2.10.3 | ScalarsysIdMeshprefix | read-write | current | first two octets for mesh |
| 1.3.6.1.4.1.24350.2.10.4 | ScalarsysIdNode | read-write | current | 4th mesh octet (3rd octet for other interfaces in implicit mode) |
| 1.3.6.1.4.1.24350.2.11 | NodesysImplicit | |||
| 1.3.6.1.4.1.24350.2.11.1 | ScalarsysImplicitEnable | read-write | current | use implicit addressing scheme - limits ap ranges |
| 1.3.6.1.4.1.24350.2.12 | NodesysInfo | |||
| 1.3.6.1.4.1.24350.2.12.1 | ScalarsysInfoCluster | read-write | current | freeform string which will be displayed on web pages |
| 1.3.6.1.4.1.24350.2.13 | NodesysL2 | |||
| 1.3.6.1.4.1.24350.2.13.1 | NodesysL2Bridge | |||
| 1.3.6.1.4.1.24350.2.13.1.1 | ScalarsysL2BridgeEnable | read-write | current | enable level 2 bridge mode |
| 1.3.6.1.4.1.24350.2.13.2 | ScalarsysL2Clientmacfwd | read-write | current | preserve client source mac to gateway and enable gateway proxy_arp |
| 1.3.6.1.4.1.24350.2.13.3 | NodesysL2Hideinternal | |||
| 1.3.6.1.4.1.24350.2.13.3.1 | ScalarsysL2HideinternalEnable | read-write | current | hide internal subnets from proxy arps |
| 1.3.6.1.4.1.24350.2.13.3.2 | NodesysL2HideinternalGateway | |||
| 1.3.6.1.4.1.24350.2.13.3.2.1 | NodesysL2HideinternalGatewayAllow | |||
| 1.3.6.1.4.1.24350.2.13.3.2.1.1 | ScalarsysL2HideinternalGatewayAllowRelaydhcp | read-write | current | arp for dhcp relay subnet |
| 1.3.6.1.4.1.24350.2.13.3.2.2 | NodesysL2HideinternalGatewayDeny | |||
| 1.3.6.1.4.1.24350.2.13.3.2.2.1 | ScalarsysL2HideinternalGatewayDenyAll | read-write | current | deny all proxy arps from gateway, unless .allowed |
| 1.3.6.1.4.1.24350.2.13.3.2.2.2 | ScalarsysL2HideinternalGatewayDenyMesh | read-write | current | hide mesh from proxy arp |
| 1.3.6.1.4.1.24350.2.14 | NodesysLocation | |||
| 1.3.6.1.4.1.24350.2.14.1 | NodesysLocationGps | |||
| 1.3.6.1.4.1.24350.2.14.1.1 | ScalarsysLocationGpsAltitude | read-write | current | gps altitude in meters |
| 1.3.6.1.4.1.24350.2.14.1.2 | ScalarsysLocationGpsLatitude | read-write | current | gps latitude in decimal degrees |
| 1.3.6.1.4.1.24350.2.14.1.3 | ScalarsysLocationGpsLongitude | read-write | current | gps longitude in decimal degrees |
| 1.3.6.1.4.1.24350.2.14.2 | ScalarsysLocationPostal | read-write | current | useful description of node's physical location |
| 1.3.6.1.4.1.24350.2.15 | NodesysMainstub | |||
| 1.3.6.1.4.1.24350.2.15.1 | ScalarsysMainstubIf | read-write | current | interface to multicast network |
| 1.3.6.1.4.1.24350.2.15.2 | ScalarsysMainstubProxyarp | read-write | current | proxy arp on multicast interface? |
| 1.3.6.1.4.1.24350.2.16 | NodesysMonitor | |||
| 1.3.6.1.4.1.24350.2.16.1 | NodesysMonitorHealth | |||
| 1.3.6.1.4.1.24350.2.16.1.1 | ScalarsysMonitorHealthEnable | read-write | current | enable health monitoring for gateway failover |
| 1.3.6.1.4.1.24350.2.16.1.2 | ScalarsysMonitorHealthHost | read-write | current | host to ping |
| 1.3.6.1.4.1.24350.2.17 | NodesysNat | |||
| 1.3.6.1.4.1.24350.2.17.1 | ScalarsysNatEnable | read-write | current | masquerading (on eth0, if gateway) |
| 1.3.6.1.4.1.24350.2.18 | NodesysNetbios | |||
| 1.3.6.1.4.1.24350.2.18.1 | ScalarsysNetbiosServers | read-write | current | space separated netbios server list |
| 1.3.6.1.4.1.24350.2.19 | NodesysNets | |||
| 1.3.6.1.4.1.24350.2.19.1 | NodesysNetsExternal | |||
| 1.3.6.1.4.1.24350.2.19.1.1 | ScalarsysNetsExternalCombined | read-only | current | coalesced .external.default, external.roamd, and .external.extra subnets |
| 1.3.6.1.4.1.24350.2.19.1.2 | ScalarsysNetsExternalDefault | read-only | current | subnets considered external to the mesh by default |
| 1.3.6.1.4.1.24350.2.19.1.3 | ScalarsysNetsExternalExtra | read-write | current | extra subnets to be considered external to the mesh |
| 1.3.6.1.4.1.24350.2.19.2 | NodesysNetsInternal | |||
| 1.3.6.1.4.1.24350.2.19.2.1 | ScalarsysNetsInternalCombined | read-only | current | coalesced .internal.default and internal.extra internal subnets |
| 1.3.6.1.4.1.24350.2.19.2.2 | ScalarsysNetsInternalDefault | read-only | current | default mesh-internal subnets |
| 1.3.6.1.4.1.24350.2.19.2.3 | ScalarsysNetsInternalExtra | read-write | current | added to .default internal subnets |
| 1.3.6.1.4.1.24350.2.19.2.4 | ScalarsysNetsInternalFlexipdefault | read-write | current | override the .nets.internal.default for flexip |
| 1.3.6.1.4.1.24350.2.20 | NodesysOrganization | |||
| 1.3.6.1.4.1.24350.2.20.1 | ScalarsysOrganizationCity | read-write | current | city or locality |
| 1.3.6.1.4.1.24350.2.20.2 | ScalarsysOrganizationCountry | read-write | current | 2 letter country code |
| 1.3.6.1.4.1.24350.2.20.3 | ScalarsysOrganizationName | read-write | current | organization name |
| 1.3.6.1.4.1.24350.2.20.4 | ScalarsysOrganizationState | read-write | current | state or province |
| 1.3.6.1.4.1.24350.2.21 | NodesysPassword | |||
| 1.3.6.1.4.1.24350.2.21.1 | ScalarsysPasswordAdmin | read-write | current | admin account password |
| 1.3.6.1.4.1.24350.2.21.2 | ScalarsysPasswordMonitor | read-write | current | monitor account password |
| 1.3.6.1.4.1.24350.2.22 | ScalarsysPlatform | read-only | current | hardware platform |
| 1.3.6.1.4.1.24350.2.23 | NodesysProvisioning | |||
| 1.3.6.1.4.1.24350.2.23.1 | ScalarsysProvisioningEnable | read-write | current | enable OnRamp provisioning |
| 1.3.6.1.4.1.24350.2.24 | NodesysRouting | |||
| 1.3.6.1.4.1.24350.2.24.1 | ScalarsysRoutingOspf | read-write | current | enable OSPF dynamic routing |
| 1.3.6.1.4.1.24350.2.24.2 | ScalarsysRoutingRip | read-write | current | enable RIP dynamic routing |
| 1.3.6.1.4.1.24350.2.25 | ScalarsysScheme | read-write | current | wireless node type |
| 1.3.6.1.4.1.24350.2.26 | NodesysShell | |||
| 1.3.6.1.4.1.24350.2.26.1 | ScalarsysShellTimeout | read-write | current | shell inactivity timeout |
| 1.3.6.1.4.1.24350.2.27 | NodesysSnmp | |||
| 1.3.6.1.4.1.24350.2.27.1 | NodesysSnmpCommunity | |||
| 1.3.6.1.4.1.24350.2.27.1.1 | ScalarsysSnmpCommunityRo | read-write | current | ro community password |
| 1.3.6.1.4.1.24350.2.27.1.2 | ScalarsysSnmpCommunityRw | read-write | current | rw community password |
| 1.3.6.1.4.1.24350.2.27.1.3 | ScalarsysSnmpCommunityTrap | read-write | current | trap community password |
| 1.3.6.1.4.1.24350.2.27.2 | ScalarsysSnmpContact | read-write | current | snmp contact |
| 1.3.6.1.4.1.24350.2.27.3 | ScalarsysSnmpLocation | read-write | current | location (taken from sys.location.postal) |
| 1.3.6.1.4.1.24350.2.27.4 | ScalarsysSnmpPort | read-write | current | snmp port |
| 1.3.6.1.4.1.24350.2.27.5 | NodesysSnmpTrap | |||
| 1.3.6.1.4.1.24350.2.27.5.1 | ScalarsysSnmpTrapHost | read-write | current | trap host (trapsink) |
| 1.3.6.1.4.1.24350.2.28 | NodesysSplash | |||
| 1.3.6.1.4.1.24350.2.28.1 | NodesysSplashAuth | |||
| 1.3.6.1.4.1.24350.2.28.1.1 | NodesysSplashAuthServer | |||
| 1.3.6.1.4.1.24350.2.28.1.1.1 | NodesysSplashAuthServerWlan1 | |||
| 1.3.6.1.4.1.24350.2.28.1.1.1.1 | ScalarsysSplashAuthServerWlan1Enable | read-write | current | require authentication |
| 1.3.6.1.4.1.24350.2.28.1.1.1.2 | ScalarsysSplashAuthServerWlan1Host | read-write | current | host for remote radius authentication |
| 1.3.6.1.4.1.24350.2.28.1.1.1.3 | ScalarsysSplashAuthServerWlan1Port | read-write | current | port for remote radius authentication |
| 1.3.6.1.4.1.24350.2.28.1.1.1.4 | ScalarsysSplashAuthServerWlan1Secret | read-write | current | shared secret for remote radius authentication |
| 1.3.6.1.4.1.24350.2.28.1.1.2 | NodesysSplashAuthServerWlan2 | |||
| 1.3.6.1.4.1.24350.2.28.1.1.2.1 | ScalarsysSplashAuthServerWlan2Enable | read-write | current | require authentication |
| 1.3.6.1.4.1.24350.2.28.1.1.2.2 | ScalarsysSplashAuthServerWlan2Host | read-write | current | host for remote radius authentication |
| 1.3.6.1.4.1.24350.2.28.1.1.2.3 | ScalarsysSplashAuthServerWlan2Port | read-write | current | port for remote radius authentication |
| 1.3.6.1.4.1.24350.2.28.1.1.2.4 | ScalarsysSplashAuthServerWlan2Secret | read-write | current | shared secret for remote radius authentication |
| 1.3.6.1.4.1.24350.2.28.1.1.3 | NodesysSplashAuthServerWlan3 | |||
| 1.3.6.1.4.1.24350.2.28.1.1.3.1 | ScalarsysSplashAuthServerWlan3Enable | read-write | current | require authentication |
| 1.3.6.1.4.1.24350.2.28.1.1.3.2 | ScalarsysSplashAuthServerWlan3Host | read-write | current | host for remote radius authentication |
| 1.3.6.1.4.1.24350.2.28.1.1.3.3 | ScalarsysSplashAuthServerWlan3Port | read-write | current | port for remote radius authentication |
| 1.3.6.1.4.1.24350.2.28.1.1.3.4 | ScalarsysSplashAuthServerWlan3Secret | read-write | current | shared secret for remote radius authentication |
| 1.3.6.1.4.1.24350.2.28.1.1.4 | NodesysSplashAuthServerWlan4 | |||
| 1.3.6.1.4.1.24350.2.28.1.1.4.1 | ScalarsysSplashAuthServerWlan4Enable | read-write | current | require authentication |
| 1.3.6.1.4.1.24350.2.28.1.1.4.2 | ScalarsysSplashAuthServerWlan4Host | read-write | current | host for remote radius authentication |
| 1.3.6.1.4.1.24350.2.28.1.1.4.3 | ScalarsysSplashAuthServerWlan4Port | read-write | current | port for remote radius authentication |
| 1.3.6.1.4.1.24350.2.28.1.1.4.4 | ScalarsysSplashAuthServerWlan4Secret | read-write | current | shared secret for remote radius authentication |
| 1.3.6.1.4.1.24350.2.28.2 | ScalarsysSplashBypasshosts | read-write | current | comma separated list of hosts to bypass sign in |
| 1.3.6.1.4.1.24350.2.28.3 | NodesysSplashEnable | |||
| 1.3.6.1.4.1.24350.2.28.3.1 | ScalarsysSplashEnableWlan1 | read-write | current | enable splash screen for wlan1 |
| 1.3.6.1.4.1.24350.2.28.3.2 | ScalarsysSplashEnableWlan2 | read-write | current | enable splash screen for wlan2 |
| 1.3.6.1.4.1.24350.2.28.3.3 | ScalarsysSplashEnableWlan3 | read-write | current | enable splash screen for wlan3 |
| 1.3.6.1.4.1.24350.2.28.3.4 | ScalarsysSplashEnableWlan4 | read-write | current | enable splash screen for wlan4 |
| 1.3.6.1.4.1.24350.2.28.4 | ScalarsysSplashExternal | read-write | current | external network device, set by sys.scheme |
| 1.3.6.1.4.1.24350.2.28.5 | ScalarsysSplashInternal | read-only | current | internal network devices, set by sys.scheme |
| 1.3.6.1.4.1.24350.2.28.6 | ScalarsysSplashTrustedmacs | read-write | current | comma separated list of mac addresses than can pass |
| 1.3.6.1.4.1.24350.2.28.7 | NodesysSplashUrl | |||
| 1.3.6.1.4.1.24350.2.28.7.1 | NodesysSplashUrlWlan1 | |||
| 1.3.6.1.4.1.24350.2.28.7.1.1 | ScalarsysSplashUrlWlan1Error | read-write | current | full url to page shown on login (internal) error |
| 1.3.6.1.4.1.24350.2.28.7.1.2 | ScalarsysSplashUrlWlan1Fail | read-write | current | full url to page shown on failed login |
| 1.3.6.1.4.1.24350.2.28.7.1.3 | ScalarsysSplashUrlWlan1Login | read-write | current | full url to desired login page |
| 1.3.6.1.4.1.24350.2.28.7.1.4 | ScalarsysSplashUrlWlan1Success | read-write | current | full url to page shown on successful login |
| 1.3.6.1.4.1.24350.2.28.7.2 | NodesysSplashUrlWlan2 | |||
| 1.3.6.1.4.1.24350.2.28.7.2.1 | ScalarsysSplashUrlWlan2Error | read-write | current | full url to page shown on login (internal) error |
| 1.3.6.1.4.1.24350.2.28.7.2.2 | ScalarsysSplashUrlWlan2Fail | read-write | current | full url to page shown on failed login |
| 1.3.6.1.4.1.24350.2.28.7.2.3 | ScalarsysSplashUrlWlan2Login | read-write | current | full url to desired login page |
| 1.3.6.1.4.1.24350.2.28.7.2.4 | ScalarsysSplashUrlWlan2Success | read-write | current | full url to page shown on successful login |
| 1.3.6.1.4.1.24350.2.28.7.3 | NodesysSplashUrlWlan3 | |||
| 1.3.6.1.4.1.24350.2.28.7.3.1 | ScalarsysSplashUrlWlan3Error | read-write | current | full url to page shown on login (internal) error |
| 1.3.6.1.4.1.24350.2.28.7.3.2 | ScalarsysSplashUrlWlan3Fail | read-write | current | full url to page shown on failed login |
| 1.3.6.1.4.1.24350.2.28.7.3.3 | ScalarsysSplashUrlWlan3Login | read-write | current | full url to desired login page |
| 1.3.6.1.4.1.24350.2.28.7.3.4 | ScalarsysSplashUrlWlan3Success | read-write | current | full url to page shown on successful login |
| 1.3.6.1.4.1.24350.2.28.7.4 | NodesysSplashUrlWlan4 | |||
| 1.3.6.1.4.1.24350.2.28.7.4.1 | ScalarsysSplashUrlWlan4Error | read-write | current | full url to page shown on login (internal) error |
| 1.3.6.1.4.1.24350.2.28.7.4.2 | ScalarsysSplashUrlWlan4Fail | read-write | current | full url to page shown on failed login |
| 1.3.6.1.4.1.24350.2.28.7.4.3 | ScalarsysSplashUrlWlan4Login | read-write | current | full url to desired login page |
| 1.3.6.1.4.1.24350.2.28.7.4.4 | ScalarsysSplashUrlWlan4Success | read-write | current | full url to page shown on successful login |
| 1.3.6.1.4.1.24350.2.29 | NodesysTime | |||
| 1.3.6.1.4.1.24350.2.29.1 | NodesysTimeRfc868 | |||
| 1.3.6.1.4.1.24350.2.29.1.1 | ScalarsysTimeRfc868Server | read-write | current | RFC868 time server name or address for gateway nodes |
| 1.3.6.1.4.1.24350.2.29.2 | ScalarsysTimeSyncdelay | read-write | current | how many seconds repeaters should delay syncing to gateway |
| 1.3.6.1.4.1.24350.2.30 | ScalarsysUnits | read-write | current | imperial (feet) or metric (meters) |
| 1.3.6.1.4.1.24350.3 | Nodefirewall | |||
| 1.3.6.1.4.1.24350.3.1 | NodefirewallConntrack | |||
| 1.3.6.1.4.1.24350.3.1.1 | NodefirewallConntrackConnlimit | |||
| 1.3.6.1.4.1.24350.3.1.1.1 | ScalarfirewallConntrackConnlimitConnections | read-write | current | number of connections allowed per client |
| 1.3.6.1.4.1.24350.3.1.1.2 | ScalarfirewallConntrackConnlimitEnable | read-write | current | limit the number of tcp connections per client |
| 1.3.6.1.4.1.24350.3.1.2 | ScalarfirewallConntrackTablesize | read-write | current | size of connection tracking table |
| 1.3.6.1.4.1.24350.3.1.3 | ScalarfirewallConntrackTcptimeoutestablished | read-write | current | tcp connections completely idle this many seconds can be dropped |
| 1.3.6.1.4.1.24350.3.2 | NodefirewallGateway | |||
| 1.3.6.1.4.1.24350.3.2.1 | ScalarfirewallGatewayEnable | read-write | current | prevent incoming connections past gateway node |
| 1.3.6.1.4.1.24350.3.3 | NodefirewallNode | |||
| 1.3.6.1.4.1.24350.3.3.1 | NodefirewallNodeAllowc2c | |||
| 1.3.6.1.4.1.24350.3.3.1.1 | ScalarfirewallNodeAllowc2cEth0 | read-write | current | allow clients to see each other if eth0.role=access |
| 1.3.6.1.4.1.24350.3.3.1.2 | ScalarfirewallNodeAllowc2cWlan1 | read-write | current | allow clients to see each other if wlan1.role=access |
| 1.3.6.1.4.1.24350.3.3.1.3 | ScalarfirewallNodeAllowc2cWlan2 | read-write | current | allow clients to see each other if wlan2.role=access |
| 1.3.6.1.4.1.24350.3.3.1.4 | ScalarfirewallNodeAllowc2cWlan3 | read-write | current | allow clients to see each other if wlan3.role=access |
| 1.3.6.1.4.1.24350.3.3.1.5 | ScalarfirewallNodeAllowc2cWlan4 | read-write | current | allow clients to see each other if wlan4.role=access |
| 1.3.6.1.4.1.24350.3.3.2 | ScalarfirewallNodeEnable | read-write | current | enable firewall on the node |
| 1.3.6.1.4.1.24350.3.3.3 | NodefirewallNodeTcp | |||
| 1.3.6.1.4.1.24350.3.3.3.1 | NodefirewallNodeTcpAllow | |||
| 1.3.6.1.4.1.24350.3.3.3.1.1 | ScalarfirewallNodeTcpAllowDest | read-write | current | tcp dest ports (space separated) to allow to this node |
| 1.3.6.1.4.1.24350.3.3.3.1.2 | ScalarfirewallNodeTcpAllowSource | read-write | current | tcp source ports (space separated) to allow to this node |
| 1.3.6.1.4.1.24350.3.3.4 | NodefirewallNodeUdp | |||
| 1.3.6.1.4.1.24350.3.3.4.1 | NodefirewallNodeUdpAllow | |||
| 1.3.6.1.4.1.24350.3.3.4.1.1 | ScalarfirewallNodeUdpAllowDest | read-write | current | udp dest ports (space separated) to allow to this node |
| 1.3.6.1.4.1.24350.3.3.4.1.2 | ScalarfirewallNodeUdpAllowSource | read-write | current | udp source ports (space separated) to allow to this node |
| 1.3.6.1.4.1.24350.4 | Nodeqos | |||
| 1.3.6.1.4.1.24350.4.1 | ScalarqosEnable | read-write | current | qos enabled? if not, nothing else here matters. |
| 1.3.6.1.4.1.24350.4.2 | ScalarqosExtra | read-write | current | space separated list of extra <key>=<limit> qos values |
| 1.3.6.1.4.1.24350.4.3 | NodeqosIn | |||
| 1.3.6.1.4.1.24350.4.3.1 | NodeqosInDefault | |||
| 1.3.6.1.4.1.24350.4.3.1.1 | ScalarqosInDefaultFlowpriority | read-write | current | input flow priority 0-99 or 'inherit' (higher is higher priority) |
| 1.3.6.1.4.1.24350.4.3.1.2 | NodeqosInDefaultHwpri | |||
| 1.3.6.1.4.1.24350.4.3.1.2.1 | ScalarqosInDefaultHwpriMax | read-write | current | max hardware priority on output (1-4, 0 for default, or 'inherit') |
| 1.3.6.1.4.1.24350.4.3.1.2.2 | ScalarqosInDefaultHwpriMin | read-write | current | min hardware priority on output (1-4, 0 for default, or 'inherit') |
| 1.3.6.1.4.1.24350.4.3.2 | NodeqosInEth0 | |||
| 1.3.6.1.4.1.24350.4.3.2.1 | ScalarqosInEth0Flowpriority | read-write | current | input flow priority 0-99 or 'inherit' (higher is higher priority) |
| 1.3.6.1.4.1.24350.4.3.2.2 | NodeqosInEth0Hwpri | |||
| 1.3.6.1.4.1.24350.4.3.2.2.1 | ScalarqosInEth0HwpriMax | read-write | current | max hardware priority on output (1-4, 0 for default, or 'inherit') |
| 1.3.6.1.4.1.24350.4.3.2.2.2 | ScalarqosInEth0HwpriMin | read-write | current | min hardware priority on output (1-4, 0 for default, or 'inherit') |
| 1.3.6.1.4.1.24350.4.3.3 | NodeqosInLocal | |||
| 1.3.6.1.4.1.24350.4.3.3.1 | ScalarqosInLocalFlowpriority | read-write | current | input flow priority 0-99 or 'inherit' (higher is higher priority) |
| 1.3.6.1.4.1.24350.4.3.3.2 | NodeqosInLocalHwpri | |||
| 1.3.6.1.4.1.24350.4.3.3.2.1 | ScalarqosInLocalHwpriMax | read-write | current | max hardware priority on output (1-4, 0 for default, or 'inherit') |
| 1.3.6.1.4.1.24350.4.3.3.2.2 | ScalarqosInLocalHwpriMin | read-write | current | min hardware priority on output (1-4, 0 for default, or 'inherit') |
| 1.3.6.1.4.1.24350.4.3.4 | NodeqosInWlan0 | |||
| 1.3.6.1.4.1.24350.4.3.4.1 | ScalarqosInWlan0Flowpriority | read-write | current | input flow priority 0-99 or 'inherit' (higher is higher priority) |
| 1.3.6.1.4.1.24350.4.3.4.2 | NodeqosInWlan0Hwpri | |||
| 1.3.6.1.4.1.24350.4.3.4.2.1 | ScalarqosInWlan0HwpriMax | read-write | current | max hardware priority on output (1-4, 0 for default, or 'inherit') |
| 1.3.6.1.4.1.24350.4.3.4.2.2 | ScalarqosInWlan0HwpriMin | read-write | current | min hardware priority on output (1-4, 0 for default, or 'inherit') |
| 1.3.6.1.4.1.24350.4.3.5 | NodeqosInWlan1 | |||
| 1.3.6.1.4.1.24350.4.3.5.1 | ScalarqosInWlan1Flowpriority | read-write | current | input flow priority 0-99 or 'inherit' (higher is higher priority) |
| 1.3.6.1.4.1.24350.4.3.5.2 | NodeqosInWlan1Hwpri | |||
| 1.3.6.1.4.1.24350.4.3.5.2.1 | ScalarqosInWlan1HwpriMax | read-write | current | max hardware priority on output (1-4, 0 for default, or 'inherit') |
| 1.3.6.1.4.1.24350.4.3.5.2.2 | ScalarqosInWlan1HwpriMin | read-write | current | min hardware priority on output (1-4, 0 for default, or 'inherit') |
| 1.3.6.1.4.1.24350.4.3.6 | NodeqosInWlan2 | |||
| 1.3.6.1.4.1.24350.4.3.6.1 | ScalarqosInWlan2Flowpriority | read-write | current | input flow priority 0-99 or 'inherit' (higher is higher priority) |
| 1.3.6.1.4.1.24350.4.3.6.2 | NodeqosInWlan2Hwpri | |||
| 1.3.6.1.4.1.24350.4.3.6.2.1 | ScalarqosInWlan2HwpriMax | read-write | current | max hardware priority on output (1-4, 0 for default, or 'inherit') |
| 1.3.6.1.4.1.24350.4.3.6.2.2 | ScalarqosInWlan2HwpriMin | read-write | current | min hardware priority on output (1-4, 0 for default, or 'inherit') |
| 1.3.6.1.4.1.24350.4.3.7 | NodeqosInWlan3 | |||
| 1.3.6.1.4.1.24350.4.3.7.1 | ScalarqosInWlan3Flowpriority | read-write | current | input flow priority 0-99 or 'inherit' (higher is higher priority) |
| 1.3.6.1.4.1.24350.4.3.7.2 | NodeqosInWlan3Hwpri | |||
| 1.3.6.1.4.1.24350.4.3.7.2.1 | ScalarqosInWlan3HwpriMax | read-write | current | max hardware priority on output (1-4, 0 for default, or 'inherit') |
| 1.3.6.1.4.1.24350.4.3.7.2.2 | ScalarqosInWlan3HwpriMin | read-write | current | min hardware priority on output (1-4, 0 for default, or 'inherit') |
| 1.3.6.1.4.1.24350.4.3.8 | NodeqosInWlan4 | |||
| 1.3.6.1.4.1.24350.4.3.8.1 | ScalarqosInWlan4Flowpriority | read-write | current | input flow priority 0-99 or 'inherit' (higher is higher priority) |
| 1.3.6.1.4.1.24350.4.3.8.2 | NodeqosInWlan4Hwpri | |||
| 1.3.6.1.4.1.24350.4.3.8.2.1 | ScalarqosInWlan4HwpriMax | read-write | current | max hardware priority on output (1-4, 0 for default, or 'inherit') |
| 1.3.6.1.4.1.24350.4.3.8.2.2 | ScalarqosInWlan4HwpriMin | read-write | current | min hardware priority on output (1-4, 0 for default, or 'inherit') |
| 1.3.6.1.4.1.24350.4.4 | NodeqosOut | |||
| 1.3.6.1.4.1.24350.4.4.1 | NodeqosOutDefault | |||
| 1.3.6.1.4.1.24350.4.4.1.1 | NodeqosOutDefaultDefault | |||
| 1.3.6.1.4.1.24350.4.4.1.1.1 | ScalarqosOutDefaultDefaultLimit | read-write | current | max bw for all data coming from default |
| 1.3.6.1.4.1.24350.4.4.1.1.2 | ScalarqosOutDefaultDefaultReserve | read-write | current | reserved bw for all data coming from default |
| 1.3.6.1.4.1.24350.4.4.1.2 | NodeqosOutDefaultEth0 | |||
| 1.3.6.1.4.1.24350.4.4.1.2.1 | ScalarqosOutDefaultEth0Limit | read-write | current | max bw for all data coming from eth0 |
| 1.3.6.1.4.1.24350.4.4.1.2.2 | ScalarqosOutDefaultEth0Reserve | read-write | current | reserved bw for all data coming from eth0 |
| 1.3.6.1.4.1.24350.4.4.1.3 | ScalarqosOutDefaultLimit | read-write | current | limit total output rate. *if blank, no other rates are used* |
| 1.3.6.1.4.1.24350.4.4.1.4 | NodeqosOutDefaultLocal | |||
| 1.3.6.1.4.1.24350.4.4.1.4.1 | ScalarqosOutDefaultLocalLimit | read-write | current | max bw for all data coming from local |
| 1.3.6.1.4.1.24350.4.4.1.4.2 | ScalarqosOutDefaultLocalReserve | read-write | current | reserved bw for all data coming from local |
| 1.3.6.1.4.1.24350.4.4.1.5 | NodeqosOutDefaultWlan0 | |||
| 1.3.6.1.4.1.24350.4.4.1.5.1 | ScalarqosOutDefaultWlan0Limit | read-write | current | max bw for all data coming from wlan0 |
| 1.3.6.1.4.1.24350.4.4.1.5.2 | ScalarqosOutDefaultWlan0Reserve | read-write | current | reserved bw for all data coming from wlan0 |
| 1.3.6.1.4.1.24350.4.4.1.6 | NodeqosOutDefaultWlan1 | |||
| 1.3.6.1.4.1.24350.4.4.1.6.1 | ScalarqosOutDefaultWlan1Limit | read-write | current | max bw for all data coming from wlan1 |
| 1.3.6.1.4.1.24350.4.4.1.6.2 | ScalarqosOutDefaultWlan1Reserve | read-write | current | reserved bw for all data coming from wlan1 |
| 1.3.6.1.4.1.24350.4.4.1.7 | NodeqosOutDefaultWlan2 | |||
| 1.3.6.1.4.1.24350.4.4.1.7.1 | ScalarqosOutDefaultWlan2Limit | read-write | current | max bw for all data coming from wlan2 |
| 1.3.6.1.4.1.24350.4.4.1.7.2 | ScalarqosOutDefaultWlan2Reserve | read-write | current | reserved bw for all data coming from wlan2 |
| 1.3.6.1.4.1.24350.4.4.1.8 | NodeqosOutDefaultWlan3 | |||
| 1.3.6.1.4.1.24350.4.4.1.8.1 | ScalarqosOutDefaultWlan3Limit | read-write | current | max bw for all data coming from wlan3 |
| 1.3.6.1.4.1.24350.4.4.1.8.2 | ScalarqosOutDefaultWlan3Reserve | read-write | current | reserved bw for all data coming from wlan3 |
| 1.3.6.1.4.1.24350.4.4.1.9 | NodeqosOutDefaultWlan4 | |||
| 1.3.6.1.4.1.24350.4.4.1.9.1 | ScalarqosOutDefaultWlan4Limit | read-write | current | max bw for all data coming from wlan4 |
| 1.3.6.1.4.1.24350.4.4.1.9.2 | ScalarqosOutDefaultWlan4Reserve | read-write | current | reserved bw for all data coming from wlan4 |
| 1.3.6.1.4.1.24350.4.4.2 | NodeqosOutWlan0 | |||
| 1.3.6.1.4.1.24350.4.4.2.1 | NodeqosOutWlan0Default | |||
| 1.3.6.1.4.1.24350.4.4.2.1.1 | NodeqosOutWlan0DefaultBe | |||
| 1.3.6.1.4.1.24350.4.4.2.1.1.1 | ScalarqosOutWlan0DefaultBeLimit | read-write | current | max bw for BE data coming from default |
| 1.3.6.1.4.1.24350.4.4.2.1.1.2 | ScalarqosOutWlan0DefaultBeReserve | read-write | current | reserved bw for BE data coming from default |
| 1.3.6.1.4.1.24350.4.4.2.1.2 | NodeqosOutWlan0DefaultBk | |||
| 1.3.6.1.4.1.24350.4.4.2.1.2.1 | ScalarqosOutWlan0DefaultBkLimit | read-write | current | max bw for BK data coming from default |
| 1.3.6.1.4.1.24350.4.4.2.1.2.2 | ScalarqosOutWlan0DefaultBkReserve | read-write | current | reserved bw for BK data coming from default |
| 1.3.6.1.4.1.24350.4.4.2.1.3 | ScalarqosOutWlan0DefaultLimit | read-write | current | max bw for all data coming from default |
| 1.3.6.1.4.1.24350.4.4.2.1.4 | ScalarqosOutWlan0DefaultReserve | read-write | current | reserved bw for all data coming from default |
| 1.3.6.1.4.1.24350.4.4.2.1.5 | NodeqosOutWlan0DefaultVi | |||
| 1.3.6.1.4.1.24350.4.4.2.1.5.1 | ScalarqosOutWlan0DefaultViLimit | read-write | current | max bw for VI data coming from default |
| 1.3.6.1.4.1.24350.4.4.2.1.5.2 | ScalarqosOutWlan0DefaultViReserve | read-write | current | reserved bw for VI data coming from default |
| 1.3.6.1.4.1.24350.4.4.2.1.6 | NodeqosOutWlan0DefaultVo | |||
| 1.3.6.1.4.1.24350.4.4.2.1.6.1 | ScalarqosOutWlan0DefaultVoLimit | read-write | current | max bw for VO data coming from default |
| 1.3.6.1.4.1.24350.4.4.2.1.6.2 | ScalarqosOutWlan0DefaultVoReserve | read-write | current | reserved bw for VO data coming from default |
| 1.3.6.1.4.1.24350.4.4.2.2 | NodeqosOutWlan0Eth0 | |||
| 1.3.6.1.4.1.24350.4.4.2.2.1 | NodeqosOutWlan0Eth0Be | |||
| 1.3.6.1.4.1.24350.4.4.2.2.1.1 | ScalarqosOutWlan0Eth0BeLimit | read-write | current | max bw for BE data coming from eth0 |
| 1.3.6.1.4.1.24350.4.4.2.2.1.2 | ScalarqosOutWlan0Eth0BeReserve | read-write | current | reserved bw for BE data coming from eth0 |
| 1.3.6.1.4.1.24350.4.4.2.2.2 | NodeqosOutWlan0Eth0Bk | |||
| 1.3.6.1.4.1.24350.4.4.2.2.2.1 | ScalarqosOutWlan0Eth0BkLimit | read-write | current | max bw for BK data coming from eth0 |
| 1.3.6.1.4.1.24350.4.4.2.2.2.2 | ScalarqosOutWlan0Eth0BkReserve | read-write | current | reserved bw for BK data coming from eth0 |
| 1.3.6.1.4.1.24350.4.4.2.2.3 | ScalarqosOutWlan0Eth0Limit | read-write | current | max bw for all data coming from eth0 |
| 1.3.6.1.4.1.24350.4.4.2.2.4 | ScalarqosOutWlan0Eth0Reserve | read-write | current | reserved bw for all data coming from eth0 |
| 1.3.6.1.4.1.24350.4.4.2.2.5 | NodeqosOutWlan0Eth0Vi | |||
| 1.3.6.1.4.1.24350.4.4.2.2.5.1 | ScalarqosOutWlan0Eth0ViLimit | read-write | current | max bw for VI data coming from eth0 |
| 1.3.6.1.4.1.24350.4.4.2.2.5.2 | ScalarqosOutWlan0Eth0ViReserve | read-write | current | reserved bw for VI data coming from eth0 |
| 1.3.6.1.4.1.24350.4.4.2.2.6 | NodeqosOutWlan0Eth0Vo | |||
| 1.3.6.1.4.1.24350.4.4.2.2.6.1 | ScalarqosOutWlan0Eth0VoLimit | read-write | current | max bw for VO data coming from eth0 |
| 1.3.6.1.4.1.24350.4.4.2.2.6.2 | ScalarqosOutWlan0Eth0VoReserve | read-write | current | reserved bw for VO data coming from eth0 |
| 1.3.6.1.4.1.24350.4.4.2.3 | ScalarqosOutWlan0Limit | read-write | current | limit total output rate. *if blank, no other rates are used* |
| 1.3.6.1.4.1.24350.4.4.2.4 | NodeqosOutWlan0Local | |||
| 1.3.6.1.4.1.24350.4.4.2.4.1 | NodeqosOutWlan0LocalBe | |||
| 1.3.6.1.4.1.24350.4.4.2.4.1.1 | ScalarqosOutWlan0LocalBeLimit | read-write | current | max bw for BE data coming from local |
| 1.3.6.1.4.1.24350.4.4.2.4.1.2 | ScalarqosOutWlan0LocalBeReserve | read-write | current | reserved bw for BE data coming from local |
| 1.3.6.1.4.1.24350.4.4.2.4.2 | NodeqosOutWlan0LocalBk | |||
| 1.3.6.1.4.1.24350.4.4.2.4.2.1 | ScalarqosOutWlan0LocalBkLimit | read-write | current | max bw for BK data coming from local |
| 1.3.6.1.4.1.24350.4.4.2.4.2.2 | ScalarqosOutWlan0LocalBkReserve | read-write | current | reserved bw for BK data coming from local |
| 1.3.6.1.4.1.24350.4.4.2.4.3 | ScalarqosOutWlan0LocalLimit | read-write | current | max bw for all data coming from local |
| 1.3.6.1.4.1.24350.4.4.2.4.4 | ScalarqosOutWlan0LocalReserve | read-write | current | reserved bw for all data coming from local |
| 1.3.6.1.4.1.24350.4.4.2.4.5 | NodeqosOutWlan0LocalVi | |||
| 1.3.6.1.4.1.24350.4.4.2.4.5.1 | ScalarqosOutWlan0LocalViLimit | read-write | current | max bw for VI data coming from local |
| 1.3.6.1.4.1.24350.4.4.2.4.5.2 | ScalarqosOutWlan0LocalViReserve | read-write | current | reserved bw for VI data coming from local |
| 1.3.6.1.4.1.24350.4.4.2.4.6 | NodeqosOutWlan0LocalVo | |||
| 1.3.6.1.4.1.24350.4.4.2.4.6.1 | ScalarqosOutWlan0LocalVoLimit | read-write | current | max bw for VO data coming from local |
| 1.3.6.1.4.1.24350.4.4.2.4.6.2 | ScalarqosOutWlan0LocalVoReserve | read-write | current | reserved bw for VO data coming from local |
| 1.3.6.1.4.1.24350.4.4.2.5 | NodeqosOutWlan0Wlan0 | |||
| 1.3.6.1.4.1.24350.4.4.2.5.1 | NodeqosOutWlan0Wlan0Be | |||
| 1.3.6.1.4.1.24350.4.4.2.5.1.1 | ScalarqosOutWlan0Wlan0BeLimit | read-write | current | max bw for BE data coming from wlan0 |
| 1.3.6.1.4.1.24350.4.4.2.5.1.2 | ScalarqosOutWlan0Wlan0BeReserve | read-write | current | reserved bw for BE data coming from wlan0 |
| 1.3.6.1.4.1.24350.4.4.2.5.2 | NodeqosOutWlan0Wlan0Bk | |||
| 1.3.6.1.4.1.24350.4.4.2.5.2.1 | ScalarqosOutWlan0Wlan0BkLimit | read-write | current | max bw for BK data coming from wlan0 |
| 1.3.6.1.4.1.24350.4.4.2.5.2.2 | ScalarqosOutWlan0Wlan0BkReserve | read-write | current | reserved bw for BK data coming from wlan0 |
| 1.3.6.1.4.1.24350.4.4.2.5.3 | ScalarqosOutWlan0Wlan0Limit | read-write | current | max bw for all data coming from wlan0 |
| 1.3.6.1.4.1.24350.4.4.2.5.4 | ScalarqosOutWlan0Wlan0Reserve | read-write | current | reserved bw for all data coming from wlan0 |
| 1.3.6.1.4.1.24350.4.4.2.5.5 | NodeqosOutWlan0Wlan0Vi | |||
| 1.3.6.1.4.1.24350.4.4.2.5.5.1 | ScalarqosOutWlan0Wlan0ViLimit | read-write | current | max bw for VI data coming from wlan0 |
| 1.3.6.1.4.1.24350.4.4.2.5.5.2 | ScalarqosOutWlan0Wlan0ViReserve | read-write | current | reserved bw for VI data coming from wlan0 |
| 1.3.6.1.4.1.24350.4.4.2.5.6 | NodeqosOutWlan0Wlan0Vo | |||
| 1.3.6.1.4.1.24350.4.4.2.5.6.1 | ScalarqosOutWlan0Wlan0VoLimit | read-write | current | max bw for VO data coming from wlan0 |
| 1.3.6.1.4.1.24350.4.4.2.5.6.2 | ScalarqosOutWlan0Wlan0VoReserve | read-write | current | reserved bw for VO data coming from wlan0 |
| 1.3.6.1.4.1.24350.4.4.2.6 | NodeqosOutWlan0Wlan1 | |||
| 1.3.6.1.4.1.24350.4.4.2.6.1 | NodeqosOutWlan0Wlan1Be | |||
| 1.3.6.1.4.1.24350.4.4.2.6.1.1 | ScalarqosOutWlan0Wlan1BeLimit | read-write | current | max bw for BE data coming from wlan1 |
| 1.3.6.1.4.1.24350.4.4.2.6.1.2 | ScalarqosOutWlan0Wlan1BeReserve | read-write | current | reserved bw for BE data coming from wlan1 |
| 1.3.6.1.4.1.24350.4.4.2.6.2 | NodeqosOutWlan0Wlan1Bk | |||
| 1.3.6.1.4.1.24350.4.4.2.6.2.1 | ScalarqosOutWlan0Wlan1BkLimit | read-write | current | max bw for BK data coming from wlan1 |
| 1.3.6.1.4.1.24350.4.4.2.6.2.2 | ScalarqosOutWlan0Wlan1BkReserve | read-write | current | reserved bw for BK data coming from wlan1 |
| 1.3.6.1.4.1.24350.4.4.2.6.3 | ScalarqosOutWlan0Wlan1Limit | read-write | current | max bw for all data coming from wlan1 |
| 1.3.6.1.4.1.24350.4.4.2.6.4 | ScalarqosOutWlan0Wlan1Reserve | read-write | current | reserved bw for all data coming from wlan1 |
| 1.3.6.1.4.1.24350.4.4.2.6.5 | NodeqosOutWlan0Wlan1Vi | |||
| 1.3.6.1.4.1.24350.4.4.2.6.5.1 | ScalarqosOutWlan0Wlan1ViLimit | read-write | current | max bw for VI data coming from wlan1 |
| 1.3.6.1.4.1.24350.4.4.2.6.5.2 | ScalarqosOutWlan0Wlan1ViReserve | read-write | current | reserved bw for VI data coming from wlan1 |
| 1.3.6.1.4.1.24350.4.4.2.6.6 | NodeqosOutWlan0Wlan1Vo | |||
| 1.3.6.1.4.1.24350.4.4.2.6.6.1 | ScalarqosOutWlan0Wlan1VoLimit | read-write | current | max bw for VO data coming from wlan1 |
| 1.3.6.1.4.1.24350.4.4.2.6.6.2 | ScalarqosOutWlan0Wlan1VoReserve | read-write | current | reserved bw for VO data coming from wlan1 |
| 1.3.6.1.4.1.24350.4.4.2.7 | NodeqosOutWlan0Wlan2 | |||
| 1.3.6.1.4.1.24350.4.4.2.7.1 | NodeqosOutWlan0Wlan2Be | |||
| 1.3.6.1.4.1.24350.4.4.2.7.1.1 | ScalarqosOutWlan0Wlan2BeLimit | read-write | current | max bw for BE data coming from wlan2 |
| 1.3.6.1.4.1.24350.4.4.2.7.1.2 | ScalarqosOutWlan0Wlan2BeReserve | read-write | current | reserved bw for BE data coming from wlan2 |
| 1.3.6.1.4.1.24350.4.4.2.7.2 | NodeqosOutWlan0Wlan2Bk | |||
| 1.3.6.1.4.1.24350.4.4.2.7.2.1 | ScalarqosOutWlan0Wlan2BkLimit | read-write | current | max bw for BK data coming from wlan2 |
| 1.3.6.1.4.1.24350.4.4.2.7.2.2 | ScalarqosOutWlan0Wlan2BkReserve | read-write | current | reserved bw for BK data coming from wlan2 |
| 1.3.6.1.4.1.24350.4.4.2.7.3 | ScalarqosOutWlan0Wlan2Limit | read-write | current | max bw for all data coming from wlan2 |
| 1.3.6.1.4.1.24350.4.4.2.7.4 | ScalarqosOutWlan0Wlan2Reserve | read-write | current | reserved bw for all data coming from wlan2 |
| 1.3.6.1.4.1.24350.4.4.2.7.5 | NodeqosOutWlan0Wlan2Vi | |||
| 1.3.6.1.4.1.24350.4.4.2.7.5.1 | ScalarqosOutWlan0Wlan2ViLimit | read-write | current | max bw for VI data coming from wlan2 |
| 1.3.6.1.4.1.24350.4.4.2.7.5.2 | ScalarqosOutWlan0Wlan2ViReserve | read-write | current | reserved bw for VI data coming from wlan2 |
| 1.3.6.1.4.1.24350.4.4.2.7.6 | NodeqosOutWlan0Wlan2Vo | |||
| 1.3.6.1.4.1.24350.4.4.2.7.6.1 | ScalarqosOutWlan0Wlan2VoLimit | read-write | current | max bw for VO data coming from wlan2 |
| 1.3.6.1.4.1.24350.4.4.2.7.6.2 | ScalarqosOutWlan0Wlan2VoReserve | read-write | current | reserved bw for VO data coming from wlan2 |
| 1.3.6.1.4.1.24350.4.4.2.8 | NodeqosOutWlan0Wlan3 | |||
| 1.3.6.1.4.1.24350.4.4.2.8.1 | NodeqosOutWlan0Wlan3Be | |||
| 1.3.6.1.4.1.24350.4.4.2.8.1.1 | ScalarqosOutWlan0Wlan3BeLimit | read-write | current | max bw for BE data coming from wlan3 |
| 1.3.6.1.4.1.24350.4.4.2.8.1.2 | ScalarqosOutWlan0Wlan3BeReserve | read-write | current | reserved bw for BE data coming from wlan3 |
| 1.3.6.1.4.1.24350.4.4.2.8.2 | NodeqosOutWlan0Wlan3Bk | |||
| 1.3.6.1.4.1.24350.4.4.2.8.2.1 | ScalarqosOutWlan0Wlan3BkLimit | read-write | current | max bw for BK data coming from wlan3 |
| 1.3.6.1.4.1.24350.4.4.2.8.2.2 | ScalarqosOutWlan0Wlan3BkReserve | read-write | current | reserved bw for BK data coming from wlan3 |
| 1.3.6.1.4.1.24350.4.4.2.8.3 | ScalarqosOutWlan0Wlan3Limit | read-write | current | max bw for all data coming from wlan3 |
| 1.3.6.1.4.1.24350.4.4.2.8.4 | ScalarqosOutWlan0Wlan3Reserve | read-write | current | reserved bw for all data coming from wlan3 |
| 1.3.6.1.4.1.24350.4.4.2.8.5 | NodeqosOutWlan0Wlan3Vi | |||
| 1.3.6.1.4.1.24350.4.4.2.8.5.1 | ScalarqosOutWlan0Wlan3ViLimit | read-write | current | max bw for VI data coming from wlan3 |
| 1.3.6.1.4.1.24350.4.4.2.8.5.2 | ScalarqosOutWlan0Wlan3ViReserve | read-write | current | reserved bw for VI data coming from wlan3 |
| 1.3.6.1.4.1.24350.4.4.2.8.6 | NodeqosOutWlan0Wlan3Vo | |||
| 1.3.6.1.4.1.24350.4.4.2.8.6.1 | ScalarqosOutWlan0Wlan3VoLimit | read-write | current | max bw for VO data coming from wlan3 |
| 1.3.6.1.4.1.24350.4.4.2.8.6.2 | ScalarqosOutWlan0Wlan3VoReserve | read-write | current | reserved bw for VO data coming from wlan3 |
| 1.3.6.1.4.1.24350.4.4.2.9 | NodeqosOutWlan0Wlan4 | |||
| 1.3.6.1.4.1.24350.4.4.2.9.1 | NodeqosOutWlan0Wlan4Be | |||
| 1.3.6.1.4.1.24350.4.4.2.9.1.1 | ScalarqosOutWlan0Wlan4BeLimit | read-write | current | max bw for BE data coming from wlan4 |
| 1.3.6.1.4.1.24350.4.4.2.9.1.2 | ScalarqosOutWlan0Wlan4BeReserve | read-write | current | reserved bw for BE data coming from wlan4 |
| 1.3.6.1.4.1.24350.4.4.2.9.2 | NodeqosOutWlan0Wlan4Bk | |||
| 1.3.6.1.4.1.24350.4.4.2.9.2.1 | ScalarqosOutWlan0Wlan4BkLimit | read-write | current | max bw for BK data coming from wlan4 |
| 1.3.6.1.4.1.24350.4.4.2.9.2.2 | ScalarqosOutWlan0Wlan4BkReserve | read-write | current | reserved bw for BK data coming from wlan4 |
| 1.3.6.1.4.1.24350.4.4.2.9.3 | ScalarqosOutWlan0Wlan4Limit | read-write | current | max bw for all data coming from wlan4 |
| 1.3.6.1.4.1.24350.4.4.2.9.4 | ScalarqosOutWlan0Wlan4Reserve | read-write | current | reserved bw for all data coming from wlan4 |
| 1.3.6.1.4.1.24350.4.4.2.9.5 | NodeqosOutWlan0Wlan4Vi | |||
| 1.3.6.1.4.1.24350.4.4.2.9.5.1 | ScalarqosOutWlan0Wlan4ViLimit | read-write | current | max bw for VI data coming from wlan4 |
| 1.3.6.1.4.1.24350.4.4.2.9.5.2 | ScalarqosOutWlan0Wlan4ViReserve | read-write | current | reserved bw for VI data coming from wlan4 |
| 1.3.6.1.4.1.24350.4.4.2.9.6 | NodeqosOutWlan0Wlan4Vo | |||
| 1.3.6.1.4.1.24350.4.4.2.9.6.1 | ScalarqosOutWlan0Wlan4VoLimit | read-write | current | max bw for VO data coming from wlan4 |
| 1.3.6.1.4.1.24350.4.4.2.9.6.2 | ScalarqosOutWlan0Wlan4VoReserve | read-write | current | reserved bw for VO data coming from wlan4 |
| 1.3.6.1.4.1.24350.5 | Nodelogs | |||
| 1.3.6.1.4.1.24350.5.1 | NodelogsMconfd | |||
| 1.3.6.1.4.1.24350.5.1.1 | ScalarlogsMconfdFiles | read-write | current | number of old files kept |
| 1.3.6.1.4.1.24350.5.1.2 | ScalarlogsMconfdSize | read-write | current | maximum file size in bytes |
| 1.3.6.1.4.1.24350.5.2 | NodelogsSecure | |||
| 1.3.6.1.4.1.24350.5.2.1 | ScalarlogsSecureFiles | read-write | current | number of old files kept |
| 1.3.6.1.4.1.24350.5.2.2 | ScalarlogsSecureSize | read-write | current | maximum file size in bytes |
| 1.3.6.1.4.1.24350.5.3 | NodelogsSnmp | |||
| 1.3.6.1.4.1.24350.5.3.1 | ScalarlogsSnmpFiles | read-write | current | number of old files kept |
| 1.3.6.1.4.1.24350.5.3.2 | ScalarlogsSnmpSize | read-write | current | maximum file size in bytes |
| 1.3.6.1.4.1.24350.5.4 | NodelogsSyslog | |||
| 1.3.6.1.4.1.24350.5.4.1 | ScalarlogsSyslogFiles | read-write | current | number of old files kept |
| 1.3.6.1.4.1.24350.5.4.2 | ScalarlogsSyslogSize | read-write | current | maximum file size in bytes |
| 1.3.6.1.4.1.24350.6 | Nodeeth0 | |||
| 1.3.6.1.4.1.24350.6.1 | Nodeeth0Acl | |||
| 1.3.6.1.4.1.24350.6.1.1 | Scalareth0AclMode | read-write | current | access control list mode ( 'none', 'whitelist', 'blacklist' ) |
| 1.3.6.1.4.1.24350.6.2 | Nodeeth0Dhcp | |||
| 1.3.6.1.4.1.24350.6.2.1 | Scalareth0DhcpAlwaysbroadcast | read-write | current | always broadcast dhcp responses |
| 1.3.6.1.4.1.24350.6.2.2 | Scalareth0DhcpDefaultleasetime | read-write | current | default dhcp lease expiration in seconds |
| 1.3.6.1.4.1.24350.6.2.3 | Scalareth0DhcpMaxleasetime | read-write | current | maximum requestable dhcp lease expiration in seconds |
| 1.3.6.1.4.1.24350.6.2.4 | Nodeeth0DhcpRelay | |||
| 1.3.6.1.4.1.24350.6.2.4.1 | Scalareth0DhcpRelayEnable | read-write | current | use dhcp relay (if sys.dhcp.relay.enable=yes) |
| 1.3.6.1.4.1.24350.6.2.5 | Scalareth0DhcpReserve | read-write | current | ip addresses to reserve at bottom of range for static assignments |
| 1.3.6.1.4.1.24350.6.2.6 | Scalareth0DhcpRole | read-write | current | interface dhcp role (none, client, server) |
| 1.3.6.1.4.1.24350.6.3 | Scalareth0Enable | read-write | current | interface is enabled |
| 1.3.6.1.4.1.24350.6.4 | Scalareth0If | read-only | current | interface associated with this module |
| 1.3.6.1.4.1.24350.6.5 | Nodeeth0Ip | |||
| 1.3.6.1.4.1.24350.6.5.1 | Scalareth0IpAddress | read-only | current | ip address |
| 1.3.6.1.4.1.24350.6.5.2 | Scalareth0IpAddressforce | read-write | current | override .ip.address (or blank) |
| 1.3.6.1.4.1.24350.6.5.3 | Scalareth0IpBroadcast | read-only | current | broadcast address |
| 1.3.6.1.4.1.24350.6.5.4 | Scalareth0IpBroadcastforce | read-write | current | override .ip.broadcast (or blank) |
| 1.3.6.1.4.1.24350.6.5.5 | Scalareth0IpGateway | read-only | current | gateway address |
| 1.3.6.1.4.1.24350.6.5.6 | Scalareth0IpGatewayforce | read-write | current | override .ip.gateway (or blank) |
| 1.3.6.1.4.1.24350.6.5.7 | Nodeeth0IpImplicit | |||
| 1.3.6.1.4.1.24350.6.5.7.1 | Nodeeth0IpImplicitSize | |||
| 1.3.6.1.4.1.24350.6.5.7.1.1 | Scalareth0IpImplicitSizeActual | read-only | current | actual size of assigned address range |
| 1.3.6.1.4.1.24350.6.5.7.1.2 | Scalareth0IpImplicitSizeRequested | read-write | current | requested size of address range (multiple of 32 minus 1) |
| 1.3.6.1.4.1.24350.6.5.7.2 | Nodeeth0IpImplicitStart | |||
| 1.3.6.1.4.1.24350.6.5.7.2.1 | Scalareth0IpImplicitStartActual | read-only | current | actual assigned fourth octet |
| 1.3.6.1.4.1.24350.6.5.7.2.2 | Scalareth0IpImplicitStartRequested | read-write | current | requested interface fourth octet (multiple of 32 plus 1) |
| 1.3.6.1.4.1.24350.6.5.8 | Scalareth0IpNetmask | read-only | current | network mask |
| 1.3.6.1.4.1.24350.6.5.9 | Scalareth0IpNetmaskforce | read-write | current | override .ip.netmask (or blank) |
| 1.3.6.1.4.1.24350.6.6 | Scalareth0Role | read-write | current | intended interface role (gateway, access, bridge) |
| 1.3.6.1.4.1.24350.6.7 | Nodeeth0Routes | |||
| 1.3.6.1.4.1.24350.6.7.1 | Scalareth0RoutesStatic | read-write | current | static routes for this interface |
| 1.3.6.1.4.1.24350.6.8 | Nodeeth0Vlan | |||
| 1.3.6.1.4.1.24350.6.8.1 | Scalareth0VlanEnable | read-write | current | use a vlan for this interface |
| 1.3.6.1.4.1.24350.6.8.2 | Scalareth0VlanId | read-write | current | vlan id (0 and 1 are usually reserved) |
| 1.3.6.1.4.1.24350.6.9 | Nodeeth0Vpn | |||
| 1.3.6.1.4.1.24350.6.9.1 | Scalareth0VpnDevice | read-write | current | device type (tap or tun) |
| 1.3.6.1.4.1.24350.6.9.2 | Scalareth0VpnEnable | read-write | current | enable vpn on gateway node |
| 1.3.6.1.4.1.24350.6.9.3 | Scalareth0VpnKeyfile | read-write | current | base name of crt/key files |
| 1.3.6.1.4.1.24350.6.9.4 | Scalareth0VpnPort | read-write | current | port number at vpn server |
| 1.3.6.1.4.1.24350.6.9.5 | Scalareth0VpnProtocol | read-write | current | protocol used for vpn |
| 1.3.6.1.4.1.24350.6.9.6 | Scalareth0VpnServer | read-write | current | hostname or ip address of the vpn server |
| 1.3.6.1.4.1.24350.7 | Nodebr0 | |||
| 1.3.6.1.4.1.24350.7.1 | Nodebr0Acl | |||
| 1.3.6.1.4.1.24350.7.1.1 | Scalarbr0AclMode | read-write | current | access control list mode ( 'none', 'whitelist', 'blacklist' ) |
| 1.3.6.1.4.1.24350.7.2 | Nodebr0Dhcp | |||
| 1.3.6.1.4.1.24350.7.2.1 | Scalarbr0DhcpAlwaysbroadcast | read-write | current | always broadcast dhcp responses |
| 1.3.6.1.4.1.24350.7.2.2 | Scalarbr0DhcpDefaultleasetime | read-write | current | default dhcp lease expiration in seconds |
| 1.3.6.1.4.1.24350.7.2.3 | Scalarbr0DhcpMaxleasetime | read-write | current | maximum requestable dhcp lease expiration in seconds |
| 1.3.6.1.4.1.24350.7.2.4 | Nodebr0DhcpRelay | |||
| 1.3.6.1.4.1.24350.7.2.4.1 | Scalarbr0DhcpRelayEnable | read-write | current | use dhcp relay (if sys.dhcp.relay.enable=yes) |
| 1.3.6.1.4.1.24350.7.2.5 | Scalarbr0DhcpReserve | read-write | current | ip addresses to reserve at bottom of range for static assignments |
| 1.3.6.1.4.1.24350.7.2.6 | Scalarbr0DhcpRole | read-write | current | interface dhcp role (none, client, server) |
| 1.3.6.1.4.1.24350.7.3 | Scalarbr0Enable | read-write | current | interface is enabled |
| 1.3.6.1.4.1.24350.7.4 | Scalarbr0Forwardingdelay | read-write | current | how long bridge watches traffic before participating |
| 1.3.6.1.4.1.24350.7.5 | Scalarbr0If | read-only | current | interface associated with this module |
| 1.3.6.1.4.1.24350.7.6 | Nodebr0Ip | |||
| 1.3.6.1.4.1.24350.7.6.1 | Scalarbr0IpAddress | read-only | current | ip address |
| 1.3.6.1.4.1.24350.7.6.2 | Scalarbr0IpAddressforce | read-write | current | override .ip.address (or blank) |
| 1.3.6.1.4.1.24350.7.6.3 | Scalarbr0IpBroadcast | read-only | current | broadcast address |
| 1.3.6.1.4.1.24350.7.6.4 | Scalarbr0IpBroadcastforce | read-write | current | override .ip.broadcast (or blank) |
| 1.3.6.1.4.1.24350.7.6.5 | Scalarbr0IpGateway | read-only | current | gateway address |
| 1.3.6.1.4.1.24350.7.6.6 | Scalarbr0IpGatewayforce | read-write | current | override .ip.gateway (or blank) |
| 1.3.6.1.4.1.24350.7.6.7 | Scalarbr0IpNetmask | read-only | current | network mask |
| 1.3.6.1.4.1.24350.7.6.8 | Scalarbr0IpNetmaskforce | read-write | current | override .ip.netmask (or blank) |
| 1.3.6.1.4.1.24350.7.7 | Scalarbr0Role | read-only | current | intended interface role (bridge) |
| 1.3.6.1.4.1.24350.7.8 | Nodebr0Routes | |||
| 1.3.6.1.4.1.24350.7.8.1 | Scalarbr0RoutesStatic | read-write | current | static routes for this interface |
| 1.3.6.1.4.1.24350.7.9 | Nodebr0Stp | |||
| 1.3.6.1.4.1.24350.7.9.1 | Scalarbr0StpEnable | read-write | current | enable spanning tree protocol |
| 1.3.6.1.4.1.24350.8 | Nodealias99 | |||
| 1.3.6.1.4.1.24350.8.1 | Scalaralias99If | read-only | current | interface associated with this module |
| 1.3.6.1.4.1.24350.8.2 | Nodealias99Ip | |||
| 1.3.6.1.4.1.24350.8.2.1 | Scalaralias99IpAddress | read-write | current | ip address |
| 1.3.6.1.4.1.24350.8.2.2 | Scalaralias99IpBroadcast | read-write | current | broadcast address |
| 1.3.6.1.4.1.24350.8.2.3 | Scalaralias99IpGateway | read-write | current | gateway address |
| 1.3.6.1.4.1.24350.8.2.4 | Scalaralias99IpNetmask | read-write | current | network mask |
| 1.3.6.1.4.1.24350.9 | Noderadio0 | |||
| 1.3.6.1.4.1.24350.9.1 | Scalarradio0Channel | read-write | current | wireless channel |
| 1.3.6.1.4.1.24350.9.2 | Scalarradio0Chansize | read-write | current | wireless channel size - 1=full, 2=half, 4=quarter |
| 1.3.6.1.4.1.24350.9.3 | Scalarradio0Distance | read-write | current | distance (in miles or km, see sys.units) of maximum link distance, or blank |
| 1.3.6.1.4.1.24350.9.4 | Scalarradio0Distancemeters | read-write | current | distance in meters |
| 1.3.6.1.4.1.24350.9.5 | Scalarradio0Frequency | read-write | current | wireless frequency (overrides radio0.channel) |
| 1.3.6.1.4.1.24350.9.6 | Scalarradio0Mode | read-write | current | 802.11 mode (0=auto, 1=802.11a, 2=802.11b, 3=802.11g) |
| 1.3.6.1.4.1.24350.9.7 | Scalarradio0Modes | read-only | current | 802.11 modes supported by this card |
| 1.3.6.1.4.1.24350.9.8 | Scalarradio0Pureg | read-write | current | 802.11g only mode (no 802.11b) |
| 1.3.6.1.4.1.24350.9.9 | Scalarradio0Ratectl | read-write | current | rate control algorithm (sample, minstrel) |
| 1.3.6.1.4.1.24350.9.10 | Scalarradio0Rts | read-write | current | rts threshold |
| 1.3.6.1.4.1.24350.9.11 | Scalarradio0Shortpreamble | read-write | current | allow short preamble - buggy old clients may need this off |
| 1.3.6.1.4.1.24350.9.12 | Scalarradio0Turbo | read-write | current | 802.11g turbo mode |
| 1.3.6.1.4.1.24350.9.13 | Scalarradio0Txpower | read-write | current | max transmit power in dBm (0-30) |
| 1.3.6.1.4.1.24350.9.14 | Scalarradio0Wlans | read-only | current | wlans mapped to this radio |
| 1.3.6.1.4.1.24350.9.15 | Scalarradio0Wlansextra | read-only | current | |
| 1.3.6.1.4.1.24350.10 | Noderadio1 | |||
| 1.3.6.1.4.1.24350.10.1 | Scalarradio1Channel | read-write | current | wireless channel |
| 1.3.6.1.4.1.24350.10.2 | Scalarradio1Chansize | read-write | current | wireless channel size - 1=full, 2=half, 4=quarter |
| 1.3.6.1.4.1.24350.10.3 | Scalarradio1Distance | read-write | current | distance (in miles or km, see sys.units) of maximum link distance, or blank |
| 1.3.6.1.4.1.24350.10.4 | Scalarradio1Distancemeters | read-write | current | distance in meters |
| 1.3.6.1.4.1.24350.10.5 | Scalarradio1Frequency | read-write | current | wireless frequency (overrides radio1.channel) |
| 1.3.6.1.4.1.24350.10.6 | Scalarradio1Mode | read-write | current | 802.11 mode (0=auto, 1=802.11a, 2=802.11b, 3=802.11g) |
| 1.3.6.1.4.1.24350.10.7 | Scalarradio1Modes | read-only | current | 802.11 modes supported by this card |
| 1.3.6.1.4.1.24350.10.8 | Scalarradio1Pureg | read-write | current | 802.11g only mode (no 802.11b) |
| 1.3.6.1.4.1.24350.10.9 | Scalarradio1Ratectl | read-write | current | rate control algorithm (sample, minstrel) |
| 1.3.6.1.4.1.24350.10.10 | Scalarradio1Rts | read-write | current | rts threshold |
| 1.3.6.1.4.1.24350.10.11 | Scalarradio1Shortpreamble | read-write | current | allow short preamble - buggy old clients may need this off |
| 1.3.6.1.4.1.24350.10.12 | Scalarradio1Turbo | read-write | current | 802.11g turbo mode |
| 1.3.6.1.4.1.24350.10.13 | Scalarradio1Txpower | read-write | current | max transmit power in dBm (0-30) |
| 1.3.6.1.4.1.24350.10.14 | Scalarradio1Wlans | read-only | current | wlans mapped to this radio |
| 1.3.6.1.4.1.24350.10.15 | Scalarradio1Wlansextra | read-only | current | |
| 1.3.6.1.4.1.24350.11 | Nodewlan0 | |||
| 1.3.6.1.4.1.24350.11.1 | Nodewlan0Acl | |||
| 1.3.6.1.4.1.24350.11.1.1 | Scalarwlan0AclMode | read-write | current | access control list mode ( 'none', 'whitelist', 'blacklist' ) |
| 1.3.6.1.4.1.24350.11.2 | Scalarwlan0Beaconinterval | read-write | current | beacon interval in milliseconds |
| 1.3.6.1.4.1.24350.11.3 | Scalarwlan0Cellid | read-only | current | adhoc cell id |
| 1.3.6.1.4.1.24350.11.4 | Nodewlan0Dhcp | |||
| 1.3.6.1.4.1.24350.11.4.1 | Scalarwlan0DhcpAlwaysbroadcast | read-write | current | always broadcast dhcp responses |
| 1.3.6.1.4.1.24350.11.4.2 | Scalarwlan0DhcpDefaultleasetime | read-write | current | default dhcp lease expiration in seconds |
| 1.3.6.1.4.1.24350.11.4.3 | Scalarwlan0DhcpMaxleasetime | read-write | current | maximum requestable dhcp lease expiration in seconds |
| 1.3.6.1.4.1.24350.11.4.4 | Nodewlan0DhcpRelay | |||
| 1.3.6.1.4.1.24350.11.4.4.1 | Scalarwlan0DhcpRelayEnable | read-write | current | use dhcp relay (if sys.dhcp.relay.enable=yes) |
| 1.3.6.1.4.1.24350.11.4.5 | Scalarwlan0DhcpReserve | read-write | current | ip addresses to reserve at bottom of range for static assignments |
| 1.3.6.1.4.1.24350.11.4.6 | Scalarwlan0DhcpRole | read-write | current | interface dhcp role (none, client, server) |
| 1.3.6.1.4.1.24350.11.5 | Scalarwlan0Enable | read-write | current | interface is enabled |
| 1.3.6.1.4.1.24350.11.6 | Scalarwlan0Enhsec | read-write | current | ignore clients that specify 'ANY' ssid |
| 1.3.6.1.4.1.24350.11.7 | Scalarwlan0Essid | read-write | current | essid for this ap |
| 1.3.6.1.4.1.24350.11.8 | Nodewlan0Fabric | |||
| 1.3.6.1.4.1.24350.11.8.1 | Scalarwlan0FabricArgs | read-write | current | mesh fabric arguments - touch at your peril! |
| 1.3.6.1.4.1.24350.11.8.2 | Scalarwlan0FabricBridge | read-write | current | bridge argument |
| 1.3.6.1.4.1.24350.11.8.3 | Scalarwlan0FabricCmd1 | read-write | current | command to activate mesh fabric part 1 |
| 1.3.6.1.4.1.24350.11.8.4 | Scalarwlan0FabricCmd2 | read-write | current | command to activate mesh part 2 |
| 1.3.6.1.4.1.24350.11.8.5 | Scalarwlan0FabricEnable | read-write | current | run mesh fabric? |
| 1.3.6.1.4.1.24350.11.8.6 | Nodewlan0FabricGateway | |||
| 1.3.6.1.4.1.24350.11.8.6.1 | Scalarwlan0FabricGatewayEnable | read-only | current | is this node a gateway |
| 1.3.6.1.4.1.24350.11.8.6.2 | Scalarwlan0FabricGatewayIf | read-only | current | interface acting as mesh gateway, if any |
| 1.3.6.1.4.1.24350.11.8.7 | Scalarwlan0FabricMargin | read-write | current | if rssi drops this far below .join, drop the neighbor |
| 1.3.6.1.4.1.24350.11.8.8 | Scalarwlan0FabricRouteadvert | read-write | current | route advertisement arguments |
| 1.3.6.1.4.1.24350.11.8.9 | Nodewlan0FabricRssi | |||
| 1.3.6.1.4.1.24350.11.8.9.1 | Scalarwlan0FabricRssiJoin | read-write | current | rssi level to join neighbor |
| 1.3.6.1.4.1.24350.11.8.9.2 | Scalarwlan0FabricRssiMargin | read-write | current | if rssi drops this far below .join, drop neighbor |
| 1.3.6.1.4.1.24350.11.9 | Scalarwlan0Frag | read-write | current | fragmentation threshold |
| 1.3.6.1.4.1.24350.11.10 | Scalarwlan0Hideessid | read-write | current | don't broadcast the essid |
| 1.3.6.1.4.1.24350.11.11 | Scalarwlan0If | read-only | current | interface associated with this module |
| 1.3.6.1.4.1.24350.11.12 | Nodewlan0Ip | |||
| 1.3.6.1.4.1.24350.11.12.1 | Scalarwlan0IpAddress | read-only | current | ip address |
| 1.3.6.1.4.1.24350.11.12.2 | Scalarwlan0IpAddressforce | read-only | current | override .ip.address (or blank) |
| 1.3.6.1.4.1.24350.11.12.3 | Scalarwlan0IpBroadcast | read-only | current | broadcast address |
| 1.3.6.1.4.1.24350.11.12.4 | Scalarwlan0IpBroadcastforce | read-only | current | override .ip.broadcast (or blank) |
| 1.3.6.1.4.1.24350.11.12.5 | Scalarwlan0IpGateway | read-only | current | gateway address |
| 1.3.6.1.4.1.24350.11.12.6 | Scalarwlan0IpGatewayforce | read-only | current | override .ip.gateway (or blank) |
| 1.3.6.1.4.1.24350.11.12.7 | Scalarwlan0IpNetmask | read-write | current | network mask |
| 1.3.6.1.4.1.24350.11.12.8 | Scalarwlan0IpNetmaskforce | read-only | current | override .ip.netmask (or blank) |
| 1.3.6.1.4.1.24350.11.13 | Nodewlan0Iwconfig | |||
| 1.3.6.1.4.1.24350.11.13.1 | Scalarwlan0IwconfigCmd | read-write | current | parameters to pass to iwconfig after all other settings |
| 1.3.6.1.4.1.24350.11.14 | Nodewlan0Iwpriv | |||
| 1.3.6.1.4.1.24350.11.14.1 | Scalarwlan0IwprivCmd | read-write | current | parameters to pass to iwpriv after all other settings |
| 1.3.6.1.4.1.24350.11.15 | Scalarwlan0Key | read-write | current | wep key - if present, overrides .keys |
| 1.3.6.1.4.1.24350.11.16 | Nodewlan0Keys | |||
| 1.3.6.1.4.1.24350.11.16.1 | Scalarwlan0Keys1 | read-write | current | one of four keys selected with .keys.default |
| 1.3.6.1.4.1.24350.11.16.2 | Scalarwlan0Keys2 | read-write | current | one of four keys selected with .keys.default |
| 1.3.6.1.4.1.24350.11.16.3 | Scalarwlan0Keys3 | read-write | current | one of four keys selected with .keys.default |
| 1.3.6.1.4.1.24350.11.16.4 | Scalarwlan0Keys4 | read-write | current | one of four keys selected with .keys.default |
| 1.3.6.1.4.1.24350.11.16.5 | Scalarwlan0KeysDefault | read-write | current | 1 to 4 to choose which of wlan0.keys.1-4 to use |
| 1.3.6.1.4.1.24350.11.17 | Nodewlan0Mconfd | |||
| 1.3.6.1.4.1.24350.11.17.1 | Scalarwlan0MconfdEnable | read-write | current | run mconfd daemon? distributed mesh configuration |
| 1.3.6.1.4.1.24350.11.17.2 | Scalarwlan0MconfdExternalhosts | read-only | current | list of external hosts we try to make external |
| 1.3.6.1.4.1.24350.11.18 | Scalarwlan0Mode | read-write | current | operating mode ( ap/master, adhoc, adhoc-demo, sta/client ) |
| 1.3.6.1.4.1.24350.11.19 | Nodewlan0Mroute | |||
| 1.3.6.1.4.1.24350.11.19.1 | Scalarwlan0MrouteArgs | read-write | current | mroute arguments |
| 1.3.6.1.4.1.24350.11.19.2 | Scalarwlan0MrouteCmd | read-write | current | mroute command |
| 1.3.6.1.4.1.24350.11.19.3 | Scalarwlan0MrouteEnable | read-write | current | run mroute daemon - IGMP query utility |
| 1.3.6.1.4.1.24350.11.20 | Scalarwlan0Mtu | read-write | current | maximum transmission unit - may cause serious problems if set too low |
| 1.3.6.1.4.1.24350.11.21 | Scalarwlan0Radio | read-write | current | which physical radio this vap is on (0 or 1) |
| 1.3.6.1.4.1.24350.11.22 | Scalarwlan0Rate | read-write | current | communications rate |
| 1.3.6.1.4.1.24350.11.23 | Scalarwlan0Role | read-write | current | intended interface role (mesh, pxp (point to point), bridge) |
| 1.3.6.1.4.1.24350.11.24 | Nodewlan0Routes | |||
| 1.3.6.1.4.1.24350.11.24.1 | Scalarwlan0RoutesAddprivnets | read-write | current | add sys.nets.internal.combined to mesh static routes? |
| 1.3.6.1.4.1.24350.11.24.2 | Scalarwlan0RoutesStatic | read-write | current | static routes for this interface |
| 1.3.6.1.4.1.24350.11.25 | Nodewlan0Topomc | |||
| 1.3.6.1.4.1.24350.11.25.1 | Scalarwlan0TopomcArgs | read-write | current | topomc arguments |
| 1.3.6.1.4.1.24350.11.25.2 | Scalarwlan0TopomcCmd | read-write | current | topomc command |
| 1.3.6.1.4.1.24350.11.25.3 | Scalarwlan0TopomcEnable | read-write | current | run topomc daemon? - network topology reporting |
| 1.3.6.1.4.1.24350.12 | Nodewlan1 | |||
| 1.3.6.1.4.1.24350.12.1 | Nodewlan1Acl | |||
| 1.3.6.1.4.1.24350.12.1.1 | Scalarwlan1AclMode | read-write | current | access control list mode ( 'none', 'whitelist', 'blacklist' ) |
| 1.3.6.1.4.1.24350.12.2 | Scalarwlan1Beaconinterval | read-write | current | beacon interval in milliseconds |
| 1.3.6.1.4.1.24350.12.3 | Scalarwlan1Cellid | read-write | current | cell id for adhoc mode |
| 1.3.6.1.4.1.24350.12.4 | Nodewlan1Dhcp | |||
| 1.3.6.1.4.1.24350.12.4.1 | Scalarwlan1DhcpAlwaysbroadcast | read-write | current | always broadcast dhcp responses |
| 1.3.6.1.4.1.24350.12.4.2 | Scalarwlan1DhcpDefaultleasetime | read-write | current | default dhcp lease expiration in seconds |
| 1.3.6.1.4.1.24350.12.4.3 | Scalarwlan1DhcpMaxleasetime | read-write | current | maximum requestable dhcp lease expiration in seconds |
| 1.3.6.1.4.1.24350.12.4.4 | Nodewlan1DhcpRelay | |||
| 1.3.6.1.4.1.24350.12.4.4.1 | Scalarwlan1DhcpRelayEnable | read-write | current | use dhcp relay (if sys.dhcp.relay.enable=yes) |
| 1.3.6.1.4.1.24350.12.4.5 | Scalarwlan1DhcpReserve | read-write | current | ip addresses to reserve at bottom of range for static assignments |
| 1.3.6.1.4.1.24350.12.4.6 | Scalarwlan1DhcpRole | read-write | current | interface dhcp role (none, client, server) |
| 1.3.6.1.4.1.24350.12.5 | Scalarwlan1Enable | read-write | current | interface is enabled |
| 1.3.6.1.4.1.24350.12.6 | Scalarwlan1Enhsec | read-write | current | ignore clients that specify 'ANY' ssid |
| 1.3.6.1.4.1.24350.12.7 | Scalarwlan1Essid | read-write | current | essid for this ap |
| 1.3.6.1.4.1.24350.12.8 | Scalarwlan1Frag | read-write | current | fragmentation threshold |
| 1.3.6.1.4.1.24350.12.9 | Scalarwlan1Hideessid | read-write | current | don't broadcast the essid |
| 1.3.6.1.4.1.24350.12.10 | Scalarwlan1If | read-only | current | interface associated with this module |
| 1.3.6.1.4.1.24350.12.11 | Nodewlan1Ip | |||
| 1.3.6.1.4.1.24350.12.11.1 | Scalarwlan1IpAddress | read-only | current | ip address |
| 1.3.6.1.4.1.24350.12.11.2 | Scalarwlan1IpAddressforce | read-write | current | override .ip.address (or blank) |
| 1.3.6.1.4.1.24350.12.11.3 | Scalarwlan1IpBroadcast | read-only | current | broadcast address |
| 1.3.6.1.4.1.24350.12.11.4 | Scalarwlan1IpBroadcastforce | read-write | current | override .ip.broadcast (or blank) |
| 1.3.6.1.4.1.24350.12.11.5 | Scalarwlan1IpGateway | read-only | current | gateway address |
| 1.3.6.1.4.1.24350.12.11.6 | Scalarwlan1IpGatewayforce | read-write | current | override .ip.gateway (or blank) |
| 1.3.6.1.4.1.24350.12.11.7 | Nodewlan1IpImplicit | |||
| 1.3.6.1.4.1.24350.12.11.7.1 | Nodewlan1IpImplicitSize | |||
| 1.3.6.1.4.1.24350.12.11.7.1.1 | Scalarwlan1IpImplicitSizeActual | read-only | current | actual size of assigned address range |
| 1.3.6.1.4.1.24350.12.11.7.1.2 | Scalarwlan1IpImplicitSizeRequested | read-write | current | requested size of address range (multiple of 32 minus 1) |
| 1.3.6.1.4.1.24350.12.11.7.2 | Nodewlan1IpImplicitStart | |||
| 1.3.6.1.4.1.24350.12.11.7.2.1 | Scalarwlan1IpImplicitStartActual | read-only | current | actual assigned fourth octet |
| 1.3.6.1.4.1.24350.12.11.7.2.2 | Scalarwlan1IpImplicitStartRequested | read-write | current | requested interface fourth octet (multiple of 32 plus 1) |
| 1.3.6.1.4.1.24350.12.11.8 | Scalarwlan1IpNetmask | read-only | current | network mask |
| 1.3.6.1.4.1.24350.12.11.9 | Scalarwlan1IpNetmaskforce | read-write | current | override .ip.netmask (or blank) |
| 1.3.6.1.4.1.24350.12.12 | Nodewlan1Iwconfig | |||
| 1.3.6.1.4.1.24350.12.12.1 | Scalarwlan1IwconfigCmd | read-write | current | parameters to pass to iwconfig after all other settings |
| 1.3.6.1.4.1.24350.12.13 | Nodewlan1Iwpriv | |||
| 1.3.6.1.4.1.24350.12.13.1 | Scalarwlan1IwprivCmd | read-write | current | parameters to pass to iwpriv after all other settings |
| 1.3.6.1.4.1.24350.12.14 | Scalarwlan1Key | read-write | current | wep key - if present, overrides .keys |
| 1.3.6.1.4.1.24350.12.15 | Nodewlan1Keys | |||
| 1.3.6.1.4.1.24350.12.15.1 | Scalarwlan1Keys1 | read-write | current | one of four keys selected with .keys.default |
| 1.3.6.1.4.1.24350.12.15.2 | Scalarwlan1Keys2 | read-write | current | one of four keys selected with .keys.default |
| 1.3.6.1.4.1.24350.12.15.3 | Scalarwlan1Keys3 | read-write | current | one of four keys selected with .keys.default |
| 1.3.6.1.4.1.24350.12.15.4 | Scalarwlan1Keys4 | read-write | current | one of four keys selected with .keys.default |
| 1.3.6.1.4.1.24350.12.15.5 | Scalarwlan1KeysDefault | read-write | current | 1 to 4 to choose which of wlan1.keys.1-4 to use |
| 1.3.6.1.4.1.24350.12.16 | Scalarwlan1Mode | read-write | current | operating mode ( ap/master, adhoc, adhoc-demo, sta/client ) |
| 1.3.6.1.4.1.24350.12.17 | Scalarwlan1Mtu | read-write | current | maximum transmission unit - may cause serious problems if set too low |
| 1.3.6.1.4.1.24350.12.18 | Scalarwlan1Radio | read-write | current | which physical radio this vap is on (0 or 1) |
| 1.3.6.1.4.1.24350.12.19 | Scalarwlan1Rate | read-write | current | communications rate |
| 1.3.6.1.4.1.24350.12.20 | Scalarwlan1Role | read-write | current | intended interface role (access, bridge) |
| 1.3.6.1.4.1.24350.12.21 | Nodewlan1Routes | |||
| 1.3.6.1.4.1.24350.12.21.1 | Scalarwlan1RoutesStatic | read-write | current | static routes for this interface |
| 1.3.6.1.4.1.24350.12.22 | Nodewlan1Vlan | |||
| 1.3.6.1.4.1.24350.12.22.1 | Scalarwlan1VlanEnable | read-write | current | use a vlan for this interface |
| 1.3.6.1.4.1.24350.12.22.2 | Scalarwlan1VlanId | read-write | current | vlan id (0 and 1 are usually reserved) |
| 1.3.6.1.4.1.24350.12.23 | Nodewlan1Wpa | |||
| 1.3.6.1.4.1.24350.12.23.1 | Nodewlan1WpaAuth | |||
| 1.3.6.1.4.1.24350.12.23.1.1 | Scalarwlan1WpaAuthArgs | read-write | current | arguments passed to authenticator |
| 1.3.6.1.4.1.24350.12.23.1.2 | Scalarwlan1WpaAuthCustom | read-write | current | command used to start authenticator if .wpa.auth.type is 'custom' |
| 1.3.6.1.4.1.24350.12.23.1.3 | Scalarwlan1WpaAuthInternal | read-write | current | 0 for external, 1 for internal |
| 1.3.6.1.4.1.24350.12.23.1.4 | Nodewlan1WpaAuthServer | |||
| 1.3.6.1.4.1.24350.12.23.1.4.1 | Scalarwlan1WpaAuthServerAddr | read-write | current | authentication server address |
| 1.3.6.1.4.1.24350.12.23.1.4.2 | Scalarwlan1WpaAuthServerPort | read-write | current | authentication server port |
| 1.3.6.1.4.1.24350.12.23.1.4.3 | Scalarwlan1WpaAuthServerSharedsecret | read-write | current | shared secret |
| 1.3.6.1.4.1.24350.12.23.1.5 | Scalarwlan1WpaAuthType | read-write | current | 'hostapd' or 'custom' |
| 1.3.6.1.4.1.24350.12.23.2 | Scalarwlan1WpaBridge | read-only | current | bridge if any, set by sys.l2.bridge.enable |
| 1.3.6.1.4.1.24350.12.23.3 | Nodewlan1WpaCa | |||
| 1.3.6.1.4.1.24350.12.23.3.1 | Nodewlan1WpaCaCert | |||
| 1.3.6.1.4.1.24350.12.23.3.1.1 | Scalarwlan1WpaCaCertFile | read-write | current | ca_cert file |
| 1.3.6.1.4.1.24350.12.23.4 | Nodewlan1WpaEapol | |||
| 1.3.6.1.4.1.24350.12.23.4.1 | Scalarwlan1WpaEapolVersion | read-write | current | 2 is default, but some older clients need 1 |
| 1.3.6.1.4.1.24350.12.23.5 | Scalarwlan1WpaEnable | read-write | current | wpa support enabled? |
| 1.3.6.1.4.1.24350.12.23.6 | Scalarwlan1WpaEssid | read-write | current | essid for wpa authentication |
| 1.3.6.1.4.1.24350.12.23.7 | Scalarwlan1WpaIf | read-only | current | management frame interface, same as wlan1.if |
| 1.3.6.1.4.1.24350.12.23.8 | Scalarwlan1WpaKeymgmt | read-write | current | WPA-PSK and/or WPA-EAP |
| 1.3.6.1.4.1.24350.12.23.9 | Scalarwlan1WpaMode | read-write | current | wpa modes: 1=wpa1, 2=wpa2, 3=both |
| 1.3.6.1.4.1.24350.12.23.10 | Nodewlan1WpaNode | |||
| 1.3.6.1.4.1.24350.12.23.10.1 | Nodewlan1WpaNodeCert | |||
| 1.3.6.1.4.1.24350.12.23.10.1.1 | Scalarwlan1WpaNodeCertFile | read-write | current | server_cert file |
| 1.3.6.1.4.1.24350.12.23.10.2 | Nodewlan1WpaNodeKey | |||
| 1.3.6.1.4.1.24350.12.23.10.2.1 | Scalarwlan1WpaNodeKeyFile | read-write | current | private_key file |
| 1.3.6.1.4.1.24350.12.23.10.2.2 | Scalarwlan1WpaNodeKeyPassphrase | read-write | current | passphrase for the node's private key |
| 1.3.6.1.4.1.24350.12.23.11 | Scalarwlan1WpaPairwise | read-write | current | accepted cipher suites - CCMP and/or TKIP |
| 1.3.6.1.4.1.24350.12.23.12 | Scalarwlan1WpaPassphrase | read-write | current | wpa passphrase |
| 1.3.6.1.4.1.24350.13 | Nodewlan2 | |||
| 1.3.6.1.4.1.24350.13.1 | Nodewlan2Acl | |||
| 1.3.6.1.4.1.24350.13.1.1 | Scalarwlan2AclMode | read-write | current | access control list mode ( 'none', 'whitelist', 'blacklist' ) |
| 1.3.6.1.4.1.24350.13.2 | Scalarwlan2Beaconinterval | read-write | current | beacon interval in milliseconds |
| 1.3.6.1.4.1.24350.13.3 | Scalarwlan2Cellid | read-write | current | cell id for adhoc mode |
| 1.3.6.1.4.1.24350.13.4 | Nodewlan2Dhcp | |||
| 1.3.6.1.4.1.24350.13.4.1 | Scalarwlan2DhcpAlwaysbroadcast | read-write | current | always broadcast dhcp responses |
| 1.3.6.1.4.1.24350.13.4.2 | Scalarwlan2DhcpDefaultleasetime | read-write | current | default dhcp lease expiration in seconds |
| 1.3.6.1.4.1.24350.13.4.3 | Scalarwlan2DhcpMaxleasetime | read-write | current | maximum requestable dhcp lease expiration in seconds |
| 1.3.6.1.4.1.24350.13.4.4 | Nodewlan2DhcpRelay | |||
| 1.3.6.1.4.1.24350.13.4.4.1 | Scalarwlan2DhcpRelayEnable | read-write | current | use dhcp relay (if sys.dhcp.relay.enable=yes) |
| 1.3.6.1.4.1.24350.13.4.5 | Scalarwlan2DhcpReserve | read-write | current | ip addresses to reserve at bottom of range for static assignments |
| 1.3.6.1.4.1.24350.13.4.6 | Scalarwlan2DhcpRole | read-write | current | interface dhcp role (none, client, server) |
| 1.3.6.1.4.1.24350.13.5 | Scalarwlan2Enable | read-write | current | interface is enabled |
| 1.3.6.1.4.1.24350.13.6 | Scalarwlan2Enhsec | read-write | current | ignore clients that specify 'ANY' ssid |
| 1.3.6.1.4.1.24350.13.7 | Scalarwlan2Essid | read-write | current | essid for this ap |
| 1.3.6.1.4.1.24350.13.8 | Scalarwlan2Frag | read-write | current | fragmentation threshold |
| 1.3.6.1.4.1.24350.13.9 | Scalarwlan2Hideessid | read-write | current | don't broadcast the essid |
| 1.3.6.1.4.1.24350.13.10 | Scalarwlan2If | read-only | current | interface associated with this module |
| 1.3.6.1.4.1.24350.13.11 | Nodewlan2Ip | |||
| 1.3.6.1.4.1.24350.13.11.1 | Scalarwlan2IpAddress | read-only | current | ip address |
| 1.3.6.1.4.1.24350.13.11.2 | Scalarwlan2IpAddressforce | read-write | current | override .ip.address (or blank) |
| 1.3.6.1.4.1.24350.13.11.3 | Scalarwlan2IpBroadcast | read-only | current | broadcast address |
| 1.3.6.1.4.1.24350.13.11.4 | Scalarwlan2IpBroadcastforce | read-write | current | override .ip.broadcast (or blank) |
| 1.3.6.1.4.1.24350.13.11.5 | Scalarwlan2IpGateway | read-only | current | gateway address |
| 1.3.6.1.4.1.24350.13.11.6 | Scalarwlan2IpGatewayforce | read-write | current | override .ip.gateway (or blank) |
| 1.3.6.1.4.1.24350.13.11.7 | Nodewlan2IpImplicit | |||
| 1.3.6.1.4.1.24350.13.11.7.1 | Nodewlan2IpImplicitSize | |||
| 1.3.6.1.4.1.24350.13.11.7.1.1 | Scalarwlan2IpImplicitSizeActual | read-only | current | actual size of assigned address range |
| 1.3.6.1.4.1.24350.13.11.7.1.2 | Scalarwlan2IpImplicitSizeRequested | read-write | current | requested size of address range (multiple of 32 minus 1) |
| 1.3.6.1.4.1.24350.13.11.7.2 | Nodewlan2IpImplicitStart | |||
| 1.3.6.1.4.1.24350.13.11.7.2.1 | Scalarwlan2IpImplicitStartActual | read-only | current | actual assigned fourth octet |
| 1.3.6.1.4.1.24350.13.11.7.2.2 | Scalarwlan2IpImplicitStartRequested | read-write | current | requested interface fourth octet (multiple of 32 plus 1) |
| 1.3.6.1.4.1.24350.13.11.8 | Scalarwlan2IpNetmask | read-only | current | network mask |
| 1.3.6.1.4.1.24350.13.11.9 | Scalarwlan2IpNetmaskforce | read-write | current | override .ip.netmask (or blank) |
| 1.3.6.1.4.1.24350.13.12 | Nodewlan2Iwconfig | |||
| 1.3.6.1.4.1.24350.13.12.1 | Scalarwlan2IwconfigCmd | read-write | current | parameters to pass to iwconfig after all other settings |
| 1.3.6.1.4.1.24350.13.13 | Nodewlan2Iwpriv | |||
| 1.3.6.1.4.1.24350.13.13.1 | Scalarwlan2IwprivCmd | read-write | current | parameters to pass to iwpriv after all other settings |
| 1.3.6.1.4.1.24350.13.14 | Scalarwlan2Key | read-write | current | wep key - if present, overrides .keys |
| 1.3.6.1.4.1.24350.13.15 | Nodewlan2Keys | |||
| 1.3.6.1.4.1.24350.13.15.1 | Scalarwlan2Keys1 | read-write | current | one of four keys selected with .keys.default |
| 1.3.6.1.4.1.24350.13.15.2 | Scalarwlan2Keys2 | read-write | current | one of four keys selected with .keys.default |
| 1.3.6.1.4.1.24350.13.15.3 | Scalarwlan2Keys3 | read-write | current | one of four keys selected with .keys.default |
| 1.3.6.1.4.1.24350.13.15.4 | Scalarwlan2Keys4 | read-write | current | one of four keys selected with .keys.default |
| 1.3.6.1.4.1.24350.13.15.5 | Scalarwlan2KeysDefault | read-write | current | 1 to 4 to choose which of wlan2.keys.1-4 to use |
| 1.3.6.1.4.1.24350.13.16 | Scalarwlan2Mode | read-write | current | operating mode ( ap/master, adhoc, adhoc-demo, sta/client ) |
| 1.3.6.1.4.1.24350.13.17 | Scalarwlan2Mtu | read-write | current | maximum transmission unit - may cause serious problems if set too low |
| 1.3.6.1.4.1.24350.13.18 | Scalarwlan2Radio | read-write | current | which physical radio this vap is on (0 or 1) |
| 1.3.6.1.4.1.24350.13.19 | Scalarwlan2Rate | read-write | current | communications rate |
| 1.3.6.1.4.1.24350.13.20 | Scalarwlan2Role | read-write | current | intended interface role (access, bridge) |
| 1.3.6.1.4.1.24350.13.21 | Nodewlan2Routes | |||
| 1.3.6.1.4.1.24350.13.21.1 | Scalarwlan2RoutesStatic | read-write | current | static routes for this interface |
| 1.3.6.1.4.1.24350.13.22 | Nodewlan2Vlan | |||
| 1.3.6.1.4.1.24350.13.22.1 | Scalarwlan2VlanEnable | read-write | current | use a vlan for this interface |
| 1.3.6.1.4.1.24350.13.22.2 | Scalarwlan2VlanId | read-write | current | vlan id (0 and 1 are usually reserved) |
| 1.3.6.1.4.1.24350.13.23 | Nodewlan2Wpa | |||
| 1.3.6.1.4.1.24350.13.23.1 | Nodewlan2WpaAuth | |||
| 1.3.6.1.4.1.24350.13.23.1.1 | Scalarwlan2WpaAuthArgs | read-write | current | arguments passed to authenticator |
| 1.3.6.1.4.1.24350.13.23.1.2 | Scalarwlan2WpaAuthCustom | read-write | current | command used to start authenticator if .wpa.auth.type is 'custom' |
| 1.3.6.1.4.1.24350.13.23.1.3 | Scalarwlan2WpaAuthInternal | read-write | current | 0 for external, 1 for internal |
| 1.3.6.1.4.1.24350.13.23.1.4 | Nodewlan2WpaAuthServer | |||
| 1.3.6.1.4.1.24350.13.23.1.4.1 | Scalarwlan2WpaAuthServerAddr | read-write | current | authentication server address |
| 1.3.6.1.4.1.24350.13.23.1.4.2 | Scalarwlan2WpaAuthServerPort | read-write | current | authentication server port |
| 1.3.6.1.4.1.24350.13.23.1.4.3 | Scalarwlan2WpaAuthServerSharedsecret | read-write | current | shared secret |
| 1.3.6.1.4.1.24350.13.23.1.5 | Scalarwlan2WpaAuthType | read-write | current | 'hostapd' or 'custom' |
| 1.3.6.1.4.1.24350.13.23.2 | Scalarwlan2WpaBridge | read-only | current | bridge if any, set by sys.l2.bridge.enable |
| 1.3.6.1.4.1.24350.13.23.3 | Nodewlan2WpaCa | |||
| 1.3.6.1.4.1.24350.13.23.3.1 | Nodewlan2WpaCaCert | |||
| 1.3.6.1.4.1.24350.13.23.3.1.1 | Scalarwlan2WpaCaCertFile | read-write | current | ca_cert file |
| 1.3.6.1.4.1.24350.13.23.4 | Nodewlan2WpaEapol | |||
| 1.3.6.1.4.1.24350.13.23.4.1 | Scalarwlan2WpaEapolVersion | read-write | current | 2 is default, but some older clients need 1 |
| 1.3.6.1.4.1.24350.13.23.5 | Scalarwlan2WpaEnable | read-write | current | wpa support enabled? |
| 1.3.6.1.4.1.24350.13.23.6 | Scalarwlan2WpaEssid | read-write | current | essid for wpa authentication |
| 1.3.6.1.4.1.24350.13.23.7 | Scalarwlan2WpaIf | read-only | current | management frame interface, same as wlan2.if |
| 1.3.6.1.4.1.24350.13.23.8 | Scalarwlan2WpaKeymgmt | read-write | current | WPA-PSK and/or WPA-EAP |
| 1.3.6.1.4.1.24350.13.23.9 | Scalarwlan2WpaMode | read-write | current | wpa modes: 1=wpa1, 2=wpa2, 3=both |
| 1.3.6.1.4.1.24350.13.23.10 | Nodewlan2WpaNode | |||
| 1.3.6.1.4.1.24350.13.23.10.1 | Nodewlan2WpaNodeCert | |||
| 1.3.6.1.4.1.24350.13.23.10.1.1 | Scalarwlan2WpaNodeCertFile | read-write | current | server_cert file |
| 1.3.6.1.4.1.24350.13.23.10.2 | Nodewlan2WpaNodeKey | |||
| 1.3.6.1.4.1.24350.13.23.10.2.1 | Scalarwlan2WpaNodeKeyFile | read-write | current | private_key file |
| 1.3.6.1.4.1.24350.13.23.10.2.2 | Scalarwlan2WpaNodeKeyPassphrase | read-write | current | passphrase for the node's private key |
| 1.3.6.1.4.1.24350.13.23.11 | Scalarwlan2WpaPairwise | read-write | current | accepted cipher suites - CCMP and/or TKIP |
| 1.3.6.1.4.1.24350.13.23.12 | Scalarwlan2WpaPassphrase | read-write | current | wpa passphrase |
| 1.3.6.1.4.1.24350.14 | Nodewlan3 | |||
| 1.3.6.1.4.1.24350.14.1 | Nodewlan3Acl | |||
| 1.3.6.1.4.1.24350.14.1.1 | Scalarwlan3AclMode | read-write | current | access control list mode ( 'none', 'whitelist', 'blacklist' ) |
| 1.3.6.1.4.1.24350.14.2 | Scalarwlan3Beaconinterval | read-write | current | beacon interval in milliseconds |
| 1.3.6.1.4.1.24350.14.3 | Scalarwlan3Cellid | read-write | current | cell id for adhoc mode |
| 1.3.6.1.4.1.24350.14.4 | Nodewlan3Dhcp | |||
| 1.3.6.1.4.1.24350.14.4.1 | Scalarwlan3DhcpAlwaysbroadcast | read-write | current | always broadcast dhcp responses |
| 1.3.6.1.4.1.24350.14.4.2 | Scalarwlan3DhcpDefaultleasetime | read-write | current | default dhcp lease expiration in seconds |
| 1.3.6.1.4.1.24350.14.4.3 | Scalarwlan3DhcpMaxleasetime | read-write | current | maximum requestable dhcp lease expiration in seconds |
| 1.3.6.1.4.1.24350.14.4.4 | Nodewlan3DhcpRelay | |||
| 1.3.6.1.4.1.24350.14.4.4.1 | Scalarwlan3DhcpRelayEnable | read-write | current | use dhcp relay (if sys.dhcp.relay.enable=yes) |
| 1.3.6.1.4.1.24350.14.4.5 | Scalarwlan3DhcpReserve | read-write | current | ip addresses to reserve at bottom of range for static assignments |
| 1.3.6.1.4.1.24350.14.4.6 | Scalarwlan3DhcpRole | read-write | current | interface dhcp role (none, client, server) |
| 1.3.6.1.4.1.24350.14.5 | Scalarwlan3Enable | read-write | current | interface is enabled |
| 1.3.6.1.4.1.24350.14.6 | Scalarwlan3Enhsec | read-write | current | ignore clients that specify 'ANY' ssid |
| 1.3.6.1.4.1.24350.14.7 | Scalarwlan3Essid | read-write | current | essid for this ap |
| 1.3.6.1.4.1.24350.14.8 | Scalarwlan3Frag | read-write | current | fragmentation threshold |
| 1.3.6.1.4.1.24350.14.9 | Scalarwlan3Hideessid | read-write | current | don't broadcast the essid |
| 1.3.6.1.4.1.24350.14.10 | Scalarwlan3If | read-only | current | interface associated with this module |
| 1.3.6.1.4.1.24350.14.11 | Nodewlan3Ip | |||
| 1.3.6.1.4.1.24350.14.11.1 | Scalarwlan3IpAddress | read-only | current | ip address |
| 1.3.6.1.4.1.24350.14.11.2 | Scalarwlan3IpAddressforce | read-write | current | override .ip.address (or blank) |
| 1.3.6.1.4.1.24350.14.11.3 | Scalarwlan3IpBroadcast | read-only | current | broadcast address |
| 1.3.6.1.4.1.24350.14.11.4 | Scalarwlan3IpBroadcastforce | read-write | current | override .ip.broadcast (or blank) |
| 1.3.6.1.4.1.24350.14.11.5 | Scalarwlan3IpGateway | read-only | current | gateway address |
| 1.3.6.1.4.1.24350.14.11.6 | Scalarwlan3IpGatewayforce | read-write | current | override .ip.gateway (or blank) |
| 1.3.6.1.4.1.24350.14.11.7 | Nodewlan3IpImplicit | |||
| 1.3.6.1.4.1.24350.14.11.7.1 | Nodewlan3IpImplicitSize | |||
| 1.3.6.1.4.1.24350.14.11.7.1.1 | Scalarwlan3IpImplicitSizeActual | read-only | current | actual size of assigned address range |
| 1.3.6.1.4.1.24350.14.11.7.1.2 | Scalarwlan3IpImplicitSizeRequested | read-write | current | requested size of address range (multiple of 32 minus 1) |
| 1.3.6.1.4.1.24350.14.11.7.2 | Nodewlan3IpImplicitStart | |||
| 1.3.6.1.4.1.24350.14.11.7.2.1 | Scalarwlan3IpImplicitStartActual | read-only | current | actual assigned fourth octet |
| 1.3.6.1.4.1.24350.14.11.7.2.2 | Scalarwlan3IpImplicitStartRequested | read-write | current | requested interface fourth octet (multiple of 32 plus 1) |
| 1.3.6.1.4.1.24350.14.11.8 | Scalarwlan3IpNetmask | read-only | current | network mask |
| 1.3.6.1.4.1.24350.14.11.9 | Scalarwlan3IpNetmaskforce | read-write | current | override .ip.netmask (or blank) |
| 1.3.6.1.4.1.24350.14.12 | Nodewlan3Iwconfig | |||
| 1.3.6.1.4.1.24350.14.12.1 | Scalarwlan3IwconfigCmd | read-write | current | parameters to pass to iwconfig after all other settings |
| 1.3.6.1.4.1.24350.14.13 | Nodewlan3Iwpriv | |||
| 1.3.6.1.4.1.24350.14.13.1 | Scalarwlan3IwprivCmd | read-write | current | parameters to pass to iwpriv after all other settings |
| 1.3.6.1.4.1.24350.14.14 | Scalarwlan3Key | read-write | current | wep key - if present, overrides .keys |
| 1.3.6.1.4.1.24350.14.15 | Nodewlan3Keys | |||
| 1.3.6.1.4.1.24350.14.15.1 | Scalarwlan3Keys1 | read-write | current | one of four keys selected with .keys.default |
| 1.3.6.1.4.1.24350.14.15.2 | Scalarwlan3Keys2 | read-write | current | one of four keys selected with .keys.default |
| 1.3.6.1.4.1.24350.14.15.3 | Scalarwlan3Keys3 | read-write | current | one of four keys selected with .keys.default |
| 1.3.6.1.4.1.24350.14.15.4 | Scalarwlan3Keys4 | read-write | current | one of four keys selected with .keys.default |
| 1.3.6.1.4.1.24350.14.15.5 | Scalarwlan3KeysDefault | read-write | current | 1 to 4 to choose which of wlan3.keys.1-4 to use |
| 1.3.6.1.4.1.24350.14.16 | Scalarwlan3Mode | read-write | current | operating mode ( ap/master, adhoc, adhoc-demo, sta/client ) |
| 1.3.6.1.4.1.24350.14.17 | Scalarwlan3Mtu | read-write | current | maximum transmission unit - may cause serious problems if set too low |
| 1.3.6.1.4.1.24350.14.18 | Scalarwlan3Radio | read-write | current | which physical radio this vap is on (0 or 1) |
| 1.3.6.1.4.1.24350.14.19 | Scalarwlan3Rate | read-write | current | communications rate |
| 1.3.6.1.4.1.24350.14.20 | Scalarwlan3Role | read-write | current | intended interface role (access, bridge) |
| 1.3.6.1.4.1.24350.14.21 | Nodewlan3Routes | |||
| 1.3.6.1.4.1.24350.14.21.1 | Scalarwlan3RoutesStatic | read-write | current | static routes for this interface |
| 1.3.6.1.4.1.24350.14.22 | Nodewlan3Vlan | |||
| 1.3.6.1.4.1.24350.14.22.1 | Scalarwlan3VlanEnable | read-write | current | use a vlan for this interface |
| 1.3.6.1.4.1.24350.14.22.2 | Scalarwlan3VlanId | read-write | current | vlan id (0 and 1 are usually reserved) |
| 1.3.6.1.4.1.24350.14.23 | Nodewlan3Wpa | |||
| 1.3.6.1.4.1.24350.14.23.1 | Nodewlan3WpaAuth | |||
| 1.3.6.1.4.1.24350.14.23.1.1 | Scalarwlan3WpaAuthArgs | read-write | current | arguments passed to authenticator |
| 1.3.6.1.4.1.24350.14.23.1.2 | Scalarwlan3WpaAuthCustom | read-write | current | command used to start authenticator if .wpa.auth.type is 'custom' |
| 1.3.6.1.4.1.24350.14.23.1.3 | Scalarwlan3WpaAuthInternal | read-write | current | 0 for external, 1 for internal |
| 1.3.6.1.4.1.24350.14.23.1.4 | Nodewlan3WpaAuthServer | |||
| 1.3.6.1.4.1.24350.14.23.1.4.1 | Scalarwlan3WpaAuthServerAddr | read-write | current | authentication server address |
| 1.3.6.1.4.1.24350.14.23.1.4.2 | Scalarwlan3WpaAuthServerPort | read-write | current | authentication server port |
| 1.3.6.1.4.1.24350.14.23.1.4.3 | Scalarwlan3WpaAuthServerSharedsecret | read-write | current | shared secret |
| 1.3.6.1.4.1.24350.14.23.1.5 | Scalarwlan3WpaAuthType | read-write | current | 'hostapd' or 'custom' |
| 1.3.6.1.4.1.24350.14.23.2 | Scalarwlan3WpaBridge | read-only | current | bridge if any, set by sys.l2.bridge.enable |
| 1.3.6.1.4.1.24350.14.23.3 | Nodewlan3WpaCa | |||
| 1.3.6.1.4.1.24350.14.23.3.1 | Nodewlan3WpaCaCert | |||
| 1.3.6.1.4.1.24350.14.23.3.1.1 | Scalarwlan3WpaCaCertFile | read-write | current | ca_cert file |
| 1.3.6.1.4.1.24350.14.23.4 | Nodewlan3WpaEapol | |||
| 1.3.6.1.4.1.24350.14.23.4.1 | Scalarwlan3WpaEapolVersion | read-write | current | 2 is default, but some older clients need 1 |
| 1.3.6.1.4.1.24350.14.23.5 | Scalarwlan3WpaEnable | read-write | current | wpa support enabled? |
| 1.3.6.1.4.1.24350.14.23.6 | Scalarwlan3WpaEssid | read-write | current | essid for wpa authentication |
| 1.3.6.1.4.1.24350.14.23.7 | Scalarwlan3WpaIf | read-only | current | management frame interface, same as wlan3.if |
| 1.3.6.1.4.1.24350.14.23.8 | Scalarwlan3WpaKeymgmt | read-write | current | WPA-PSK and/or WPA-EAP |
| 1.3.6.1.4.1.24350.14.23.9 | Scalarwlan3WpaMode | read-write | current | wpa modes: 1=wpa1, 2=wpa2, 3=both |
| 1.3.6.1.4.1.24350.14.23.10 | Nodewlan3WpaNode | |||
| 1.3.6.1.4.1.24350.14.23.10.1 | Nodewlan3WpaNodeCert | |||
| 1.3.6.1.4.1.24350.14.23.10.1.1 | Scalarwlan3WpaNodeCertFile | read-write | current | server_cert file |
| 1.3.6.1.4.1.24350.14.23.10.2 | Nodewlan3WpaNodeKey | |||
| 1.3.6.1.4.1.24350.14.23.10.2.1 | Scalarwlan3WpaNodeKeyFile | read-write | current | private_key file |
| 1.3.6.1.4.1.24350.14.23.10.2.2 | Scalarwlan3WpaNodeKeyPassphrase | read-write | current | passphrase for the node's private key |
| 1.3.6.1.4.1.24350.14.23.11 | Scalarwlan3WpaPairwise | read-write | current | accepted cipher suites - CCMP and/or TKIP |
| 1.3.6.1.4.1.24350.14.23.12 | Scalarwlan3WpaPassphrase | read-write | current | wpa passphrase |
| 1.3.6.1.4.1.24350.15 | Nodewlan4 | |||
| 1.3.6.1.4.1.24350.15.1 | Nodewlan4Acl | |||
| 1.3.6.1.4.1.24350.15.1.1 | Scalarwlan4AclMode | read-write | current | access control list mode ( 'none', 'whitelist', 'blacklist' ) |
| 1.3.6.1.4.1.24350.15.2 | Scalarwlan4Beaconinterval | read-write | current | beacon interval in milliseconds |
| 1.3.6.1.4.1.24350.15.3 | Scalarwlan4Cellid | read-write | current | cell id for adhoc mode |
| 1.3.6.1.4.1.24350.15.4 | Nodewlan4Dhcp | |||
| 1.3.6.1.4.1.24350.15.4.1 | Scalarwlan4DhcpAlwaysbroadcast | read-write | current | always broadcast dhcp responses |
| 1.3.6.1.4.1.24350.15.4.2 | Scalarwlan4DhcpDefaultleasetime | read-write | current | default dhcp lease expiration in seconds |
| 1.3.6.1.4.1.24350.15.4.3 | Scalarwlan4DhcpMaxleasetime | read-write | current | maximum requestable dhcp lease expiration in seconds |
| 1.3.6.1.4.1.24350.15.4.4 | Nodewlan4DhcpRelay | |||
| 1.3.6.1.4.1.24350.15.4.4.1 | Scalarwlan4DhcpRelayEnable | read-write | current | use dhcp relay (if sys.dhcp.relay.enable=yes) |
| 1.3.6.1.4.1.24350.15.4.5 | Scalarwlan4DhcpReserve | read-write | current | ip addresses to reserve at bottom of range for static assignments |
| 1.3.6.1.4.1.24350.15.4.6 | Scalarwlan4DhcpRole | read-write | current | interface dhcp role (none, client, server) |
| 1.3.6.1.4.1.24350.15.5 | Scalarwlan4Enable | read-write | current | interface is enabled |
| 1.3.6.1.4.1.24350.15.6 | Scalarwlan4Enhsec | read-write | current | ignore clients that specify 'ANY' ssid |
| 1.3.6.1.4.1.24350.15.7 | Scalarwlan4Essid | read-write | current | essid for this ap |
| 1.3.6.1.4.1.24350.15.8 | Scalarwlan4Frag | read-write | current | fragmentation threshold |
| 1.3.6.1.4.1.24350.15.9 | Scalarwlan4Hideessid | read-write | current | don't broadcast the essid |
| 1.3.6.1.4.1.24350.15.10 | Scalarwlan4If | read-only | current | interface associated with this module |
| 1.3.6.1.4.1.24350.15.11 | Nodewlan4Ip | |||
| 1.3.6.1.4.1.24350.15.11.1 | Scalarwlan4IpAddress | read-only | current | ip address |
| 1.3.6.1.4.1.24350.15.11.2 | Scalarwlan4IpAddressforce | read-write | current | override .ip.address (or blank) |
| 1.3.6.1.4.1.24350.15.11.3 | Scalarwlan4IpBroadcast | read-only | current | broadcast address |
| 1.3.6.1.4.1.24350.15.11.4 | Scalarwlan4IpBroadcastforce | read-write | current | override .ip.broadcast (or blank) |
| 1.3.6.1.4.1.24350.15.11.5 | Scalarwlan4IpGateway | read-only | current | gateway address |
| 1.3.6.1.4.1.24350.15.11.6 | Scalarwlan4IpGatewayforce | read-write | current | override .ip.gateway (or blank) |
| 1.3.6.1.4.1.24350.15.11.7 | Nodewlan4IpImplicit | |||
| 1.3.6.1.4.1.24350.15.11.7.1 | Nodewlan4IpImplicitSize | |||
| 1.3.6.1.4.1.24350.15.11.7.1.1 | Scalarwlan4IpImplicitSizeActual | read-only | current | actual size of assigned address range |
| 1.3.6.1.4.1.24350.15.11.7.1.2 | Scalarwlan4IpImplicitSizeRequested | read-write | current | requested size of address range (multiple of 32 minus 1) |
| 1.3.6.1.4.1.24350.15.11.7.2 | Nodewlan4IpImplicitStart | |||
| 1.3.6.1.4.1.24350.15.11.7.2.1 | Scalarwlan4IpImplicitStartActual | read-only | current | actual assigned fourth octet |
| 1.3.6.1.4.1.24350.15.11.7.2.2 | Scalarwlan4IpImplicitStartRequested | read-write | current | requested interface fourth octet (multiple of 32 plus 1) |
| 1.3.6.1.4.1.24350.15.11.8 | Scalarwlan4IpNetmask | read-only | current | network mask |
| 1.3.6.1.4.1.24350.15.11.9 | Scalarwlan4IpNetmaskforce | read-write | current | override .ip.netmask (or blank) |
| 1.3.6.1.4.1.24350.15.12 | Nodewlan4Iwconfig | |||
| 1.3.6.1.4.1.24350.15.12.1 | Scalarwlan4IwconfigCmd | read-write | current | parameters to pass to iwconfig after all other settings |
| 1.3.6.1.4.1.24350.15.13 | Nodewlan4Iwpriv | |||
| 1.3.6.1.4.1.24350.15.13.1 | Scalarwlan4IwprivCmd | read-write | current | parameters to pass to iwpriv after all other settings |
| 1.3.6.1.4.1.24350.15.14 | Scalarwlan4Key | read-write | current | wep key - if present, overrides .keys |
| 1.3.6.1.4.1.24350.15.15 | Nodewlan4Keys | |||
| 1.3.6.1.4.1.24350.15.15.1 | Scalarwlan4Keys1 | read-write | current | one of four keys selected with .keys.default |
| 1.3.6.1.4.1.24350.15.15.2 | Scalarwlan4Keys2 | read-write | current | one of four keys selected with .keys.default |
| 1.3.6.1.4.1.24350.15.15.3 | Scalarwlan4Keys3 | read-write | current | one of four keys selected with .keys.default |
| 1.3.6.1.4.1.24350.15.15.4 | Scalarwlan4Keys4 | read-write | current | one of four keys selected with .keys.default |
| 1.3.6.1.4.1.24350.15.15.5 | Scalarwlan4KeysDefault | read-write | current | 1 to 4 to choose which of wlan4.keys.1-4 to use |
| 1.3.6.1.4.1.24350.15.16 | Scalarwlan4Mode | read-write | current | operating mode ( ap/master, adhoc, adhoc-demo, sta/client ) |
| 1.3.6.1.4.1.24350.15.17 | Scalarwlan4Mtu | read-write | current | maximum transmission unit - may cause serious problems if set too low |
| 1.3.6.1.4.1.24350.15.18 | Scalarwlan4Radio | read-write | current | which physical radio this vap is on (0 or 1) |
| 1.3.6.1.4.1.24350.15.19 | Scalarwlan4Rate | read-write | current | communications rate |
| 1.3.6.1.4.1.24350.15.20 | Scalarwlan4Role | read-write | current | intended interface role (access, bridge) |
| 1.3.6.1.4.1.24350.15.21 | Nodewlan4Routes | |||
| 1.3.6.1.4.1.24350.15.21.1 | Scalarwlan4RoutesStatic | read-write | current | static routes for this interface |
| 1.3.6.1.4.1.24350.15.22 | Nodewlan4Vlan | |||
| 1.3.6.1.4.1.24350.15.22.1 | Scalarwlan4VlanEnable | read-write | current | use a vlan for this interface |
| 1.3.6.1.4.1.24350.15.22.2 | Scalarwlan4VlanId | read-write | current | vlan id (0 and 1 are usually reserved) |
| 1.3.6.1.4.1.24350.15.23 | Nodewlan4Wpa | |||
| 1.3.6.1.4.1.24350.15.23.1 | Nodewlan4WpaAuth | |||
| 1.3.6.1.4.1.24350.15.23.1.1 | Scalarwlan4WpaAuthArgs | read-write | current | arguments passed to authenticator |
| 1.3.6.1.4.1.24350.15.23.1.2 | Scalarwlan4WpaAuthCustom | read-write | current | command used to start authenticator if .wpa.auth.type is 'custom' |
| 1.3.6.1.4.1.24350.15.23.1.3 | Scalarwlan4WpaAuthInternal | read-write | current | 0 for external, 1 for internal |
| 1.3.6.1.4.1.24350.15.23.1.4 | Nodewlan4WpaAuthServer | |||
| 1.3.6.1.4.1.24350.15.23.1.4.1 | Scalarwlan4WpaAuthServerAddr | read-write | current | authentication server address |
| 1.3.6.1.4.1.24350.15.23.1.4.2 | Scalarwlan4WpaAuthServerPort | read-write | current | authentication server port |
| 1.3.6.1.4.1.24350.15.23.1.4.3 | Scalarwlan4WpaAuthServerSharedsecret | read-write | current | shared secret |
| 1.3.6.1.4.1.24350.15.23.1.5 | Scalarwlan4WpaAuthType | read-write | current | 'hostapd' or 'custom' |
| 1.3.6.1.4.1.24350.15.23.2 | Scalarwlan4WpaBridge | read-only | current | bridge if any, set by sys.l2.bridge.enable |
| 1.3.6.1.4.1.24350.15.23.3 | Nodewlan4WpaCa | |||
| 1.3.6.1.4.1.24350.15.23.3.1 | Nodewlan4WpaCaCert | |||
| 1.3.6.1.4.1.24350.15.23.3.1.1 | Scalarwlan4WpaCaCertFile | read-write | current | ca_cert file |
| 1.3.6.1.4.1.24350.15.23.4 | Nodewlan4WpaEapol | |||
| 1.3.6.1.4.1.24350.15.23.4.1 | Scalarwlan4WpaEapolVersion | read-write | current | 2 is default, but some older clients need 1 |
| 1.3.6.1.4.1.24350.15.23.5 | Scalarwlan4WpaEnable | read-write | current | wpa support enabled? |
| 1.3.6.1.4.1.24350.15.23.6 | Scalarwlan4WpaEssid | read-write | current | essid for wpa authentication |
| 1.3.6.1.4.1.24350.15.23.7 | Scalarwlan4WpaIf | read-only | current | management frame interface, same as wlan4.if |
| 1.3.6.1.4.1.24350.15.23.8 | Scalarwlan4WpaKeymgmt | read-write | current | WPA-PSK and/or WPA-EAP |
| 1.3.6.1.4.1.24350.15.23.9 | Scalarwlan4WpaMode | read-write | current | wpa modes: 1=wpa1, 2=wpa2, 3=both |
| 1.3.6.1.4.1.24350.15.23.10 | Nodewlan4WpaNode | |||
| 1.3.6.1.4.1.24350.15.23.10.1 | Nodewlan4WpaNodeCert | |||
| 1.3.6.1.4.1.24350.15.23.10.1.1 | Scalarwlan4WpaNodeCertFile | read-write | current | server_cert file |
| 1.3.6.1.4.1.24350.15.23.10.2 | Nodewlan4WpaNodeKey | |||
| 1.3.6.1.4.1.24350.15.23.10.2.1 | Scalarwlan4WpaNodeKeyFile | read-write | current | private_key file |
| 1.3.6.1.4.1.24350.15.23.10.2.2 | Scalarwlan4WpaNodeKeyPassphrase | read-write | current | passphrase for the node's private key |
| 1.3.6.1.4.1.24350.15.23.11 | Scalarwlan4WpaPairwise | read-write | current | accepted cipher suites - CCMP and/or TKIP |
| 1.3.6.1.4.1.24350.15.23.12 | Scalarwlan4WpaPassphrase | read-write | current | wpa passphrase |
| 1.3.6.1.4.1.24350.100 | NodeenRouteTraps | |||
| 1.3.6.1.4.1.24350.100.1 | NodeenRouteConfigChange | This trap is triggered when any modification is done in the node configuration. Important note: modifying interface status on a node does not send a linkDown o… | ||
| 1.3.6.1.4.1.24350.100.2 | NodeenRouteConfigReset | This trap is triggered when the node configuration is reloaded |