TRAPEZE-NETWORKS-TRAP-MIB
269 objects
Notifications emitted by Trapeze Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2004-2012 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.14525.2.1 | ScalartrpzDeviceId | accessible-for-notify | current | Enumeration of devices as indicated in registration MIB. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.2 | ScalartrpzMobilityDomainIp | accessible-for-notify | current | IP address of the other switch which the send switch is reporting on. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.3 | ScalartrpzAPMACAddress | accessible-for-notify | current | MAC address of the AP of interest. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.4 | ScalartrpzClientMACAddress | accessible-for-notify | current | MAC address of the client of interest. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.5 | ScalartrpzRFDetectXmtrMacAddr | accessible-for-notify | current | Describes the transmitter's MAC address. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.6 | ScalartrpzPortNum | accessible-for-notify | current | Port number on the AC which reported this rogue during a detection sweep. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.7 | ScalartrpzAPRadioNum | accessible-for-notify | current | Radio number of the AP which reported this rogue during a detection sweep. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.8 | ScalartrpzRadioRssi | accessible-for-notify | obsolete | The received signal strength as measured by the AP radio which reported this rogue during a detection sweep. This object is used within notifications and is no… |
| 1.3.6.1.4.1.14525.2.9 | ScalartrpzRadioBSSID | accessible-for-notify | current | The basic service set identifier of the rogue from the beacon frame reported by the AP during a detection sweep. This object is used within notifications and i… |
| 1.3.6.1.4.1.14525.2.10 | ScalartrpzUserName | accessible-for-notify | current | The client user name as learned from the AAA process. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.11 | ScalartrpzClientAuthServerIp | accessible-for-notify | current | The client authentication server ip address. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.12 | ScalartrpzClientSessionState | accessible-for-notify | current | The state for a client session. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.13 | ScalartrpzDAPNum | accessible-for-notify | current | The DAP number on the wireless switch. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.14 | ScalartrpzClientIp | accessible-for-notify | obsolete | The client ip address. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.15 | ScalartrpzClientSessionId | accessible-for-notify | current | The unique global id for a client session. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.16 | ScalartrpzClientAuthenProtocolType | accessible-for-notify | current | The authentication protocol for a client. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.17 | ScalartrpzClientVLANName | accessible-for-notify | current | The vlan name a client is on. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.18 | ScalartrpzClientSessionStartTime | accessible-for-notify | obsolete | The start time of a client session, relative to the sysUptime. This object is used within notifications and is not accessible. Obsolete. Do not use it because … |
| 1.3.6.1.4.1.14525.2.19 | ScalartrpzClientFailureCause | accessible-for-notify | current | Display string for possible failure cause for a client session. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.20 | ScalartrpzClientRoamedFromPortNum | accessible-for-notify | obsolete | The port number on the AC a client has roamed from. This object is used within notifications and is not accessible. Obsoleted by 'trpzClientRoamedFromPhysPortN… |
| 1.3.6.1.4.1.14525.2.21 | ScalartrpzClientRoamedFromRadioNum | accessible-for-notify | obsolete | The radio number of the AP the client is roamed from. This object is used within notifications and is not accessible. Obsoleted by 'trpzClientRoamedFromRadioIn… |
| 1.3.6.1.4.1.14525.2.22 | ScalartrpzClientRoamedFromDAPNum | accessible-for-notify | obsolete | The DAP number on the AC which reported this rogue during roam. This object is used within notifications and is not accessible. Obsoleted by 'trpzClientRoamedF… |
| 1.3.6.1.4.1.14525.2.23 | ScalartrpzUserParams | accessible-for-notify | current | A display string of User Parameters for client user authorization attributes learned through AAA and/or used by the system. Note that the syntax will be (name=… |
| 1.3.6.1.4.1.14525.2.24 | ScalartrpzClientLocationPolicyIndex | accessible-for-notify | current | Index of the Location Policy rule applied to a user. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.25 | ScalartrpzClientAssociationFailureCause | accessible-for-notify | current | The client association failure cause. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.26 | ScalartrpzClientAuthenticationFailureCause | accessible-for-notify | current | The client authentication failure cause. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.27 | ScalartrpzClientAuthorizationFailureCause | accessible-for-notify | current | The client authorization failure cause. Note that if it is the user-param, we would additionally expect the failure cause description to list the user attribut… |
| 1.3.6.1.4.1.14525.2.28 | ScalartrpzClientFailureCauseDescription | accessible-for-notify | current | Display string for describing the client failure cause. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.29 | ScalartrpzClientRoamedFromWsIp | accessible-for-notify | obsolete | The system IP address of the AC (wireless switch) a client roamed from. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.30 | ScalartrpzClientRoamedFromAccessType | accessible-for-notify | obsolete | The client access type (ap, dap, wired) that a client roamed from. This object is used within notifications and is not accessible. Obsoleted by 'trpzClientRoam… |
| 1.3.6.1.4.1.14525.2.31 | ScalartrpzClientAccessType | accessible-for-notify | current | The client access type (ap, dap, wired). This object is used within notifications and is not accessible. For new traps, use trpzClientAccessMode instead of thi… |
| 1.3.6.1.4.1.14525.2.32 | ScalartrpzRadioMACAddress | accessible-for-notify | current | AP Radio MAC address. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.33 | ScalartrpzRadioPowerChangeReason | accessible-for-notify | current | The type of event that caused an AP radio power change; occurs due to auto-tune operation. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.34 | ScalartrpzNewChannelNum | accessible-for-notify | current | New channel number of the AP radio used after an auto tune event. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.35 | ScalartrpzOldChannelNum | accessible-for-notify | current | Old channel number of the AP radio used before an auto tune event. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.36 | ScalartrpzChannelChangeReason | accessible-for-notify | current | The type of event that caused an AP radio channel change; occurs due to auto-tune operation. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.37 | ScalartrpzRFDetectListenerListInfo | accessible-for-notify | current | The RF Detection Listener list info including a list of (listener mac, rssi, channel, ssid, time). There will be a maximum of 6 entries in the list. Formats: M… |
| 1.3.6.1.4.1.14525.2.38 | ScalartrpzRadioSSID | accessible-for-notify | current | The radio SSID string This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.39 | ScalartrpzNewPowerLevel | accessible-for-notify | current | New power level of the AP radio used after an auto tune event. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.40 | ScalartrpzOldPowerLevel | accessible-for-notify | current | Old power level of the AP radio used before an auto tune event. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.41 | ScalartrpzRadioPowerChangeDescription | accessible-for-notify | current | The radio power change description. In the case of reason being dup-pkts-threshold-exceed(1), and retransmit-threshold-exceed(2), clientMacAddress will be incl… |
| 1.3.6.1.4.1.14525.2.42 | ScalartrpzCounterMeasurePerformerListInfo | accessible-for-notify | obsolete | A list of information for APs performing Counter Measures including a list of performer mac addresses. This object is used within notifications and is not acce… |
| 1.3.6.1.4.1.14525.2.43 | ScalartrpzClientDot1xState | accessible-for-notify | current | The state for a client 802.1X. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.44 | ScalartrpzClientDot1xFailureCause | accessible-for-notify | current | The client 802.1X failure cause. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.45 | ScalartrpzAPAccessType | accessible-for-notify | obsolete | The access point access type (ap, dap,). This object is used within notifications and is not accessible. Not used by any notification. |
| 1.3.6.1.4.1.14525.2.46 | ScalartrpzUserAccessType | accessible-for-notify | current | The user access type (MAC, WEB, DOT1X, LAST-RESORT). This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.47 | ScalartrpzClientSessionElapsedTime | accessible-for-notify | obsolete | The elapsed time for a client session. Obsoleted because session time is usually reported in seconds. This object is used within notifications and is not acces… |
| 1.3.6.1.4.1.14525.2.48 | ScalartrpzLocalId | accessible-for-notify | current | Local Id for the session. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.49 | ScalartrpzRFDetectDoSType | accessible-for-notify | current | The type of denial of service (DoS) attack. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.50 | ScalartrpzSourceWsIp | accessible-for-notify | current | IP address of another AC (wireless switch). This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.51 | ScalartrpzClientVLANid | accessible-for-notify | current | VLAN ID used by client traffic. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.52 | ScalartrpzClientVLANtag | accessible-for-notify | current | VLAN tag used by client traffic. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.53 | ScalartrpzDeviceModel | accessible-for-notify | current | The model of a device in printable US-ASCII. If unknown (or not available), then the value is a zero length string. This object is used within notifications an… |
| 1.3.6.1.4.1.14525.2.54 | ScalartrpzDeviceSerNum | accessible-for-notify | current | The serial number of an AP in printable US-ASCII. If unknown (or not available), then the value is a zero length string. Should NOT be used to identify other d… |
| 1.3.6.1.4.1.14525.2.55 | ScalartrpzRsaPubKeyFingerPrint | accessible-for-notify | current | The hash of the RSA public key (of a key pair) in binary form that uniquely identifies the public key of an AP. This object is used within notifications and is… |
| 1.3.6.1.4.1.14525.2.56 | ScalartrpzDAPconnectWarningType | accessible-for-notify | current | The type of DAP connect warning. The values are: not-configured-fingerprint-connect(1)...a DAP, which has an RSA keypair but did not have its fingerprint confi… |
| 1.3.6.1.4.1.14525.2.57 | ScalartrpzClientMACAddress2 | accessible-for-notify | current | MAC address of the second client of interest. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.58 | ScalartrpzApAttachType | accessible-for-notify | current | How the AP is attached to the AC (directly or via L2/L3 network). This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.59 | ScalartrpzApPortOrDapNum | accessible-for-notify | obsolete | The Port Number if the AP is directly attached, or the CLI-assigned DAP Number if attached via L2/L3 network. This object is used within notifications and is n… |
| 1.3.6.1.4.1.14525.2.60 | ScalartrpzApName | accessible-for-notify | current | The name of the AP, as assigned in AC's CLI; defaults to AP<Number> (examples: 'AP01', 'AP22', 'AP333', 'AP4444'); could have been changed from CLI to a meanin… |
| 1.3.6.1.4.1.14525.2.61 | ScalartrpzApTransition | accessible-for-notify | current | AP state Transition, as seen by the AC. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.62 | ScalartrpzApFailDetail | accessible-for-notify | current | Detailed failure code for some of the transitions specified in 'trpzApTransition' object. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.63 | ScalartrpzRadioType | accessible-for-notify | current | Indicates the AP Radio Type, as seen by AC. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.64 | ScalartrpzRadioConfigState | accessible-for-notify | current | Indicates the Radio State, as seen by the AC. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.65 | ScalartrpzApConnectSecurityType | accessible-for-notify | current | Indicates the security level of the connection between AP and AC. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.66 | ScalartrpzApServiceAvailability | accessible-for-notify | current | Indicates the level of wireless service availability. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.67 | ScalartrpzApWasOperational | accessible-for-notify | current | Indicates whether the AP was operational before a transition occurred. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.68 | ScalartrpzClientTimeSinceLastRoam | accessible-for-notify | current | The time in seconds since the most recent roam of a given client. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.69 | ScalartrpzClientIpAddrChangeReason | accessible-for-notify | current | Indicates the reason why client IP address changed. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.70 | ScalartrpzRFDetectRogueAPMacAddr | accessible-for-notify | current | Describes the MAC address of the Rogue AP the transmitter is connected to. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.71 | ScalartrpzBlacklistingRemainingTime | accessible-for-notify | current | The time in seconds remaining until a given transmitter could be removed from the Black List. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.72 | ScalartrpzBlacklistingCause | accessible-for-notify | current | Indicates the reason why a given transmitter is blacklisted. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.73 | ScalartrpzNumLicensedActiveAPs | accessible-for-notify | current | Indicates the maximum (licensed) number of active APs for this AC. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.74 | ScalartrpzClientDynAuthorClientIp | accessible-for-notify | current | The dynamic authorization client IP address which caused the change of authorization. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.75 | ScalartrpzChangedUserParamOldValues | accessible-for-notify | current | A display string listing the changed AAA attributes and their values, before the change of authorization was executed. This object is used within notifications… |
| 1.3.6.1.4.1.14525.2.76 | ScalartrpzChangedUserParamNewValues | accessible-for-notify | current | A display string listing the changed AAA attributes and their values, after the change of authorization was executed. This object is used within notifications … |
| 1.3.6.1.4.1.14525.2.77 | ScalartrpzClientDisconnectSource | accessible-for-notify | current | The external source that initiated the termination of a session. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.78 | ScalartrpzClientDisconnectDescription | accessible-for-notify | current | Display string for providing available information related to the external source that initiated a session termination. This object is used within notification… |
| 1.3.6.1.4.1.14525.2.79 | ScalartrpzMobilityDomainSecondarySeedIp | accessible-for-notify | current | The secondary seed IP address to which the Mobility Domain has failed over. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.80 | ScalartrpzMobilityDomainPrimarySeedIp | accessible-for-notify | current | The primary seed IP address to which the Mobility Domain has failed back. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.81 | ScalartrpzRFDetectClassificationReason | accessible-for-notify | current | Indicates the reason why a RF device is classified the way it is. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.82 | ScalartrpzConfigSaveFileName | accessible-for-notify | current | Display string listing the name of the file to which the running configuration was saved. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.83 | ScalartrpzConfigSaveInitiatorType | accessible-for-notify | current | Indicates the source that initiated a configuration save. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.84 | ScalartrpzConfigSaveInitiatorIp | accessible-for-notify | current | The IP address of the source that initiated a configuration save. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.85 | ScalartrpzConfigSaveInitiatorDetails | accessible-for-notify | current | Display string listing additional information regarding the source that initiated a configuration save, when available. This object is used within notification… |
| 1.3.6.1.4.1.14525.2.86 | ScalartrpzConfigSaveGeneration | accessible-for-notify | current | Indicates the number of configuration changes since the last system boot. The generation count is used to track the number of times the running configuration h… |
| 1.3.6.1.4.1.14525.2.87 | ScalartrpzApNum | accessible-for-notify | current | The administratively assigned AP Number, unique on same AC (switch), regardless of how APs are attached to the AC. This object is used within notifications and… |
| 1.3.6.1.4.1.14525.2.88 | ScalartrpzRadioMode | accessible-for-notify | current | Indicates the administratively controlled Radio Mode (enabled/disabled/sentry). This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.89 | ScalartrpzMichaelMICFailureCause | accessible-for-notify | current | Indicates the Michael MIC Failure cause / who detected it. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.90 | ScalartrpzClientAccessMode | accessible-for-notify | current | The client access mode (ap, wired). This object is used within notifications and is not accessible. Intended to replace trpzClientAccessType. (In 6.0, direct- … |
| 1.3.6.1.4.1.14525.2.91 | ScalartrpzClientAuthorizationReason | accessible-for-notify | current | Indicates the reason why client performed AAA authorization. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.92 | ScalartrpzPhysPortNum | accessible-for-notify | current | Physical Port Number on the AC. Zero means the port is unknown or not applicable (for example, when trpzClientAccessMode = 'ap'). This object is used within no… |
| 1.3.6.1.4.1.14525.2.93 | ScalartrpzApMgrOldIp | accessible-for-notify | current | The IP address of the AP's former primary manager switch. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.94 | ScalartrpzApMgrNewIp | accessible-for-notify | current | The IP address of the AP's new primary manager switch. This address was formerly the AP's secondary backup link. This object is used within notifications and i… |
| 1.3.6.1.4.1.14525.2.95 | ScalartrpzApMgrChangeReason | accessible-for-notify | current | Indicates the reason why the AP's primary manager changed. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.96 | ScalartrpzClientClearedReason | accessible-for-notify | current | Indicates the reason why client was cleared. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.97 | ScalartrpzMobilityDomainResiliencyStatus | accessible-for-notify | current | Indicates the current resilient capacity status for a mobility domain. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.98 | ScalartrpzClientSessionElapsedSeconds | accessible-for-notify | current | Indicates the time in seconds elapsed since the start of the Client Session. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.99 | ScalartrpzRadioChannelWidth | accessible-for-notify | current | Indicates the administratively controlled Channel Width (20MHz/40MHz). This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.100 | ScalartrpzRadioMimoState | accessible-for-notify | current | Indicates the Radio MIMO State, as seen by the AC (1x1/2x3/3x3). This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.101 | ScalartrpzClientRadioType | accessible-for-notify | current | Indicates the Client Radio Type, as detected by an attached AP and reported to the AC. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.102 | ScalartrpzRFDetectXmtrRadioType | accessible-for-notify | current | Indicates the Radio Type of the Transmitter, as detected by an attached AP and reported to the AC. The Transmitter may be a wireless client or an AP. This obje… |
| 1.3.6.1.4.1.14525.2.103 | ScalartrpzRFDetectXmtrCryptoType | accessible-for-notify | current | Indicates the Crypto Type used by the Transmitter, as detected by an attached AP and reported to the AC. This object is used within notifications and is not ac… |
| 1.3.6.1.4.1.14525.2.104 | ScalartrpzClusterFailureReason | accessible-for-notify | current | Indicates the reason why cluster configuration failed to apply. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.105 | ScalartrpzClusterFailureDescription | accessible-for-notify | current | Display string for describing the cluster configuration failure cause. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.106 | ScalartrpzMultimediaCommunicationServerID | accessible-for-notify | current | The multimedia communication server ID. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.107 | ScalartrpzMultimediaLocalStationIp | accessible-for-notify | current | The local multimedia station IP address. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.108 | ScalartrpzMultimediaLocalStationPort | accessible-for-notify | current | The local multimedia station UDP port. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.109 | ScalartrpzMultimediaLocalStationEndpointID | accessible-for-notify | current | The local multimedia station endpoint ID. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.110 | ScalartrpzMultimediaRemoteStationIp | accessible-for-notify | current | The remote multimedia station IP address. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.111 | ScalartrpzMultimediaRemoteStationPort | accessible-for-notify | current | The remote multimedia station UDP port. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.112 | ScalartrpzMultimediaRemoteStationEndpointID | accessible-for-notify | current | The remote multimedia station endpoint ID. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.113 | ScalartrpzMultimediaSignalingProtocol | accessible-for-notify | current | The multimedia signaling protocol that was used for initiating this call (session). This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.114 | ScalartrpzMultimediaCallBandwidthAndCodec | accessible-for-notify | current | Display string providing information about the multimedia call codec and bandwidth. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.115 | ScalartrpzMultimediaCallDataRate | accessible-for-notify | current | The data rate, in Kbps. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.116 | ScalartrpzMultimediaCallRssi | accessible-for-notify | current | The client RSSI (Received Signal Strength Indicator), in decibels referred to 1 milliwatt (dBm). A higher value indicates a stronger signal. This object is use… |
| 1.3.6.1.4.1.14525.2.117 | ScalartrpzMultimediaCallFailureReason | accessible-for-notify | current | Indicates the reason why the multimedia call has failed. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.118 | ScalartrpzMultimediaCallDirection | accessible-for-notify | current | Indicates the multimedia call direction (incoming/outgoing). This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.119 | ScalartrpzApTunnelLimit | accessible-for-notify | current | Indicates the maximum number of tunnels supported for an AP. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.120 | ScalartrpzWsTunnelLimit | accessible-for-notify | current | Indicates the maximum number of tunnels supported for an AC (wireless switch). This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.121 | ScalartrpzWsTunnelLimitType | accessible-for-notify | current | Indicates the type of limit exceeded that caused the AC (wireless switch) to reject a tunnel creation request. This object is used within notifications and is … |
| 1.3.6.1.4.1.14525.2.122 | ScalartrpzRFNoiseSourceID | accessible-for-notify | current | RF Noise Source ID. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.123 | ScalartrpzRFNoiseSourceType | accessible-for-notify | current | RF Noise Source Type. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.124 | ScalartrpzRFNoiseChannel | accessible-for-notify | current | Channel number. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.125 | ScalartrpzRFNoiseRssi | accessible-for-notify | current | The noise RSSI (Received Signal Strength Indicator), in decibels referred to 1 milliwatt (dBm). A higher value indicates stronger noise. This object is used wi… |
| 1.3.6.1.4.1.14525.2.126 | ScalartrpzRFNoiseDutyCycle | accessible-for-notify | current | Estimated Duty Cycle: fraction of time that a noise source is transmitting. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.127 | ScalartrpzRFNoiseChannelInterferenceMeasure | accessible-for-notify | current | Severity of channel interference attributed to a noise source. A higher value indicates more severe interference. This object is used within notifications and … |
| 1.3.6.1.4.1.14525.2.128 | ScalartrpzRFNoiseAge | accessible-for-notify | current | Age of noise in seconds. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.129 | ScalartrpzM2UMulticastAddrType | accessible-for-notify | current | The address type of 'trpzM2UMulticastAddr'. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.130 | ScalartrpzM2UMulticastAddr | accessible-for-notify | current | The multicast address for which conversion to unicast is performed. The type of this address is specified in 'trpzM2UMulticastAddrType'. This object is used wi… |
| 1.3.6.1.4.1.14525.2.131 | ScalartrpzM2UConvNotPossibleReason | accessible-for-notify | current | Indicates the reason why multicast to unicast conversion cannot be performed on an AP with this feature enabled. This object is used within notifications and i… |
| 1.3.6.1.4.1.14525.2.132 | ScalartrpzRadioBand | accessible-for-notify | current | Indicates the radio band used in an auto-tune operation. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.133 | ScalartrpzRadiosTunedCount | accessible-for-notify | current | Indicates how many radios had their operational characteristics changed as a result of an auto-tune process. This object is used within notifications and is no… |
| 1.3.6.1.4.1.14525.2.134 | ScalartrpzAutoTuneFailureReason | accessible-for-notify | current | Indicates the reason why an auto-tune operation failed to complete. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.135 | ScalartrpzClientAuthServerAddrType | accessible-for-notify | current | The address type of 'trpzClientAuthServerAddr'. Only the value 'ipv4(1)' is reported as of release 8.0. This object is used within notifications and is not acc… |
| 1.3.6.1.4.1.14525.2.136 | ScalartrpzClientAuthServerAddr | accessible-for-notify | current | The Internet address of the client authentication server. The type of this address is specified in 'trpzClientAuthServerAddrType'. This object is used within n… |
| 1.3.6.1.4.1.14525.2.137 | ScalartrpzClientRoamedFromWsAddrType | accessible-for-notify | current | The address type of 'trpzClientRoamedFromWsAddr'. Only the value 'ipv4(1)' is reported as of release 8.0. This object is used within notifications and is not a… |
| 1.3.6.1.4.1.14525.2.138 | ScalartrpzClientRoamedFromWsAddr | accessible-for-notify | current | The system IP address of the AC (wireless switch) a client roamed from. The type of this address is specified in 'trpzClientRoamedFromWsAddrType'. This object … |
| 1.3.6.1.4.1.14525.2.139 | ScalartrpzClientDynAuthorClientAddrType | accessible-for-notify | current | The address type of 'trpzClientDynAuthorClientAddr'. Only the value 'ipv4(1)' is reported as of release 8.0. This object is used within notifications and is no… |
| 1.3.6.1.4.1.14525.2.140 | ScalartrpzClientDynAuthorClientAddr | accessible-for-notify | current | The dynamic authorization client IP address which caused the change of authorization. The type of this address is specified in 'trpzClientDynAuthorClientAddrTy… |
| 1.3.6.1.4.1.14525.2.141 | ScalartrpzClientIpAddrType | accessible-for-notify | current | The address type of 'trpzClientIpAddr'. Only the values 'ipv4(1)' and 'ipv6(2)' are reported. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.142 | ScalartrpzClientIpAddr | accessible-for-notify | current | Indicates an IP address of the client. The type of this address is specified in 'trpzClientIpAddrType'. This object is used within notifications and is not acc… |
| 1.3.6.1.4.1.14525.2.143 | ScalartrpzClientIPv4Addr | accessible-for-notify | current | The IPv4 address of the client. If the client does not use the IPv4 stack, or its IPv4 address has not yet been detected, then all octets will have the value 0… |
| 1.3.6.1.4.1.14525.2.144 | ScalartrpzClientIPv6LinkLocalAddr | accessible-for-notify | current | The IPv6 link-local address of the client. If the client does not use the IPv6 stack, or its IPv6 link-local address has not yet been detected, then all octets… |
| 1.3.6.1.4.1.14525.2.145 | ScalartrpzApRadioIndex | accessible-for-notify | current | AP Radio index. Intended to replace 'trpzAPRadioNum'. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.146 | ScalartrpzClientRoamedFromAccessMode | accessible-for-notify | current | The client access mode (ap, wired) that a client roamed from. This object is used within notifications and is not accessible. Obsoletes 'trpzClientRoamedFromAc… |
| 1.3.6.1.4.1.14525.2.147 | ScalartrpzClientRoamedFromApNum | accessible-for-notify | current | The number of the AP the client roamed from. Obsoletes 'trpzClientRoamedFromDAPNum'. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.148 | ScalartrpzClientRoamedFromRadioIndex | accessible-for-notify | current | The index of the AP Radio the client roamed from. Obsoletes 'trpzClientRoamedFromRadioNum'. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.149 | ScalartrpzClientRoamedFromPhysPortNum | accessible-for-notify | current | Identifies the physical port on the AC used by the wired-auth client, before roam. Zero means the port is unknown or not applicable (for example, when trpzClie… |
| 1.3.6.1.4.1.14525.2.150 | ScalartrpzClientDeviceType | accessible-for-notify | current | The type of the client device. Is a zero length string if unknown. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.151 | ScalartrpzClientDeviceTypeOld | accessible-for-notify | current | The type of the client device, before change. Is a zero length string if unknown. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.2.152 | ScalartrpzClientDeviceGroup | accessible-for-notify | current | The group that the detected client device type belongs to. Is a zero length string if the device type is unknown. This object is used within notifications and … |
| 1.3.6.1.4.1.14525.2.153 | ScalartrpzClientDeviceProfileName | accessible-for-notify | current | The name of the device profile associated with the detected client device. A device profile is a collection of policies that apply to one or more types of clie… |
| 1.3.6.1.4.1.14525.2.154 | ScalartrpzClientDeviceProfileNameOld | accessible-for-notify | current | The name of the device profile associated with the detected client device, before change. A device profile is a collection of policies that apply to one or mor… |
| 1.3.6.1.4.1.14525.2.155 | ScalartrpzClientDeviceProfileChangeReason | accessible-for-notify | current | The reason why the device profile changed. This object is used within notifications and is not accessible. |
| 1.3.6.1.4.1.14525.4.1 | IdentitytrpzTrapMib | for | Notifications emitted by Trapeze Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent imp… | |
| 1.3.6.1.4.1.14525.5.0 | NodetrpzTrapsV2 | |||
| 1.3.6.1.4.1.14525.5.0.1 | NotificationtrpzDeviceFailTrap | current | The device has a failure indication | |
| 1.3.6.1.4.1.14525.5.0.2 | NotificationtrpzDeviceOkayTrap | current | The device has recovered | |
| 1.3.6.1.4.1.14525.5.0.3 | NotificationtrpzPoEFailTrap | current | PoE has failed on the indicated port | |
| 1.3.6.1.4.1.14525.5.0.4 | NotificationtrpzApTimeoutTrap | obsolete | The AP entering the AC at port trpzPortNum with MAC trpzRadioMacAddress and of the access type (ap or dap) has not responded. Replaced by trpzApNonOperStatusTr… | |
| 1.3.6.1.4.1.14525.5.0.5 | NotificationtrpzAPBootTrap | obsolete | The AP entering the AC at port trpzPortNum with MAC trpzRadioMacAddress and of the access type (ap or dap) has booted. Replaced by trpzApNonOperStatusTrap2, wi… | |
| 1.3.6.1.4.1.14525.5.0.6 | NotificationtrpzMobilityDomainJoinTrap | current | The mobility domain member has received an UP notice from the remote address. | |
| 1.3.6.1.4.1.14525.5.0.7 | NotificationtrpzMobilityDomainTimeoutTrap | current | The mobility domain member has declared the remote address to be DOWN. | |
| 1.3.6.1.4.1.14525.5.0.8 | NotificationtrpzMpMichaelMICFailure | obsolete | Two Michael MIC failures were seen within 60 seconds of each other. Obsoleted by trpzMichaelMICFailure. | |
| 1.3.6.1.4.1.14525.5.0.9 | NotificationtrpzRFDetectRogueAPTrap | obsolete | This trap is sent when RF detection finds a rogue AP. XmtrMacAddr is the radio MAC address from the beacon. ListenerListInfo is a display string of a list of l… | |
| 1.3.6.1.4.1.14525.5.0.10 | NotificationtrpzRFDetectAdhocUserTrap | current | This trap is sent when RF detection sweep finds a ad-hoc user. trpzRFDetectXmtrMacAddr is the MAC address of the ad-hoc user. trpzRFDetectListenerListInfo is a… | |
| 1.3.6.1.4.1.14525.5.0.11 | NotificationtrpzRFDetectRogueDisappearTrap | obsolete | This trap is sent when a rogue has disappeared. Obsoleted by trpzRFDetectRogueDeviceDisappearTrap. | |
| 1.3.6.1.4.1.14525.5.0.12 | NotificationtrpzClientAuthenticationFailureTrap | current | This trap is sent if a client authentication fails. | |
| 1.3.6.1.4.1.14525.5.0.13 | NotificationtrpzClientAuthorizationFailureTrap | current | This trap is sent if a client authorization fails. | |
| 1.3.6.1.4.1.14525.5.0.14 | NotificationtrpzClientAssociationFailureTrap | current | This trap is sent if a client association fails. | |
| 1.3.6.1.4.1.14525.5.0.15 | NotificationtrpzClientAuthorizationSuccessTrap | obsolete | This trap is sent when a client authorizes. Obsoleted by trpzClientAuthorizationSuccessTrap5. | |
| 1.3.6.1.4.1.14525.5.0.16 | NotificationtrpzClientDeAssociationTrap | obsolete | This trap is sent if a client de-association occurred. Obsoleted by trpzClientDeAssociationTrap2. | |
| 1.3.6.1.4.1.14525.5.0.17 | NotificationtrpzClientRoamingTrap | obsolete | This trap is sent if a client roams from one location to another. Obsoleted by trpzClientRoamingTrap2. | |
| 1.3.6.1.4.1.14525.5.0.18 | NotificationtrpzAutoTuneRadioPowerChangeTrap | current | This trap is sent if a radio's power level has changed based on auto-tune. | |
| 1.3.6.1.4.1.14525.5.0.19 | NotificationtrpzAutoTuneRadioChannelChangeTrap | current | This trap is sent if a radio's channel has changed based on auto-tune. | |
| 1.3.6.1.4.1.14525.5.0.20 | NotificationtrpzCounterMeasureStartTrap | current | This trap is sent when counter measures are started against a rogue. trpzRFDetectXmtrMacAddr is the mac address of the rogue we are doing counter measures agai… | |
| 1.3.6.1.4.1.14525.5.0.21 | NotificationtrpzCounterMeasureStopTrap | current | This trap is sent when counter measures are stopped against a rogue. trpzRFDetectXmtrMacAddr is the mac address of the rogue we were doing counter measures aga… | |
| 1.3.6.1.4.1.14525.5.0.22 | NotificationtrpzClientDot1xFailureTrap | current | This trap is sent if a client failed 802.1X. | |
| 1.3.6.1.4.1.14525.5.0.23 | NotificationtrpzClientClearedTrap | obsolete | This trap is sent when a client session is cleared. Obsoleted by trpzClientClearedTrap3. | |
| 1.3.6.1.4.1.14525.5.0.24 | NotificationtrpzClientAuthorizationSuccessTrap2 | obsolete | This trap is sent when a client authorizes. Obsoleted by trpzClientAuthorizationSuccessTrap5. | |
| 1.3.6.1.4.1.14525.5.0.25 | NotificationtrpzRFDetectSpoofedMacAPTrap | obsolete | This trap is sent when RF detection finds an AP using the MAC of the listener. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectLi… | |
| 1.3.6.1.4.1.14525.5.0.26 | NotificationtrpzRFDetectSpoofedSsidAPTrap | obsolete | This trap is sent when RF detection finds an AP using the SSID of the listener, and the AP is not in the mobility domain. trpzRFDetectXmtrMacAddr is the radio … | |
| 1.3.6.1.4.1.14525.5.0.27 | NotificationtrpzRFDetectDoSTrap | current | This trap is sent when RF detection finds a denial of service (DoS) occurring. trpzRFDetectDoSType specifies the type of DoS. trpzRFDetectXmtrMacAddr is the ra… | |
| 1.3.6.1.4.1.14525.5.0.28 | NotificationtrpzRFDetectClientViaRogueWiredAPTrap | obsolete | This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. trpzSourceWsIp is the IP address of the AC (switch)… | |
| 1.3.6.1.4.1.14525.5.0.29 | NotificationtrpzRFDetectInterferingRogueAPTrap | obsolete | This trap is sent when RF detection finds an interfering rogue AP. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListIn… | |
| 1.3.6.1.4.1.14525.5.0.30 | NotificationtrpzRFDetectInterferingRogueDisappearTrap | obsolete | This trap is sent when an interfering rogue has disappeared. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. Obsoleted by trpzRFDetectSuspect… | |
| 1.3.6.1.4.1.14525.5.0.31 | NotificationtrpzRFDetectUnAuthorizedSsidTrap | obsolete | This trap is sent when RF detection finds use of an unauthorized SSID. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerLi… | |
| 1.3.6.1.4.1.14525.5.0.32 | NotificationtrpzRFDetectUnAuthorizedOuiTrap | obsolete | This trap is sent when RF detection finds use of an unauthorized OUI. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerLis… | |
| 1.3.6.1.4.1.14525.5.0.33 | NotificationtrpzRFDetectUnAuthorizedAPTrap | obsolete | This trap is sent when RF detection finds operation of an unauthorized AP. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListen… | |
| 1.3.6.1.4.1.14525.5.0.34 | NotificationtrpzDAPConnectWarningTrap | obsolete | A DAP, tried to connect to the AC. trpzDeviceModel provides the model of the DAP. trpzDeviceSerNum provides the serial number of the DAP. trpzRsaPubKeyFingerPr… | |
| 1.3.6.1.4.1.14525.5.0.35 | NotificationtrpzRFDetectDoSPortTrap | current | This trap is sent when RF detection finds a denial of service (DoS) occurring. This has port and AP info instead of 'Listener info'. trpzRFDetectDoSType specif… | |
| 1.3.6.1.4.1.14525.5.0.36 | NotificationtrpzMpMichaelMICFailure2 | obsolete | Two Michael MIC failures were seen within 60 seconds of each other. Object trpzClientMACAddress is the source of the first failure, and object trpzClientMACAdd… | |
| 1.3.6.1.4.1.14525.5.0.37 | NotificationtrpzApNonOperStatusTrap | obsolete | This trap is sent when the AP changes state and the new one is a non-operational state. Obsoleted by trpzApNonOperStatusTrap2. | |
| 1.3.6.1.4.1.14525.5.0.38 | NotificationtrpzApOperRadioStatusTrap | obsolete | This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availabil… | |
| 1.3.6.1.4.1.14525.5.0.39 | NotificationtrpzClientIpAddrChangeTrap | obsolete | This trap is sent when a client's IP address changes. The most likely case for this is when the client first connects to the network. Obsoleted by trpzClientIp… | |
| 1.3.6.1.4.1.14525.5.0.40 | NotificationtrpzClientAssociationSuccessTrap | current | This trap is sent if a client association succeeds. WARNING: DO NOT enable it in normal use. It may impair switch performance! Only recommended for debugging n… | |
| 1.3.6.1.4.1.14525.5.0.41 | NotificationtrpzClientAuthenticationSuccessTrap | current | This trap is sent if a client authentication succeeds. | |
| 1.3.6.1.4.1.14525.5.0.42 | NotificationtrpzClientDeAuthenticationTrap | obsolete | This trap is sent if a client de-authentication occurred. Obsoleted by trpzClientDeAuthenticationTrap2. | |
| 1.3.6.1.4.1.14525.5.0.43 | NotificationtrpzRFDetectBlacklistedTrap | current | This trap is sent if an association, re-association or de-association request (packet) is detected from a blacklisted transmitter (identified by MAC: 'trpzRFDe… | |
| 1.3.6.1.4.1.14525.5.0.44 | NotificationtrpzRFDetectClientViaRogueWiredAPTrap2 | obsolete | This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. trpzSourceWsIp is the IP address of the AC (switch)… | |
| 1.3.6.1.4.1.14525.5.0.45 | NotificationtrpzRFDetectAdhocUserDisappearTrap | current | This trap is sent when RF detection sweep finds that an ad-hoc user disappeared. trpzRFDetectXmtrMacAddr is the MAC address of the ad-hoc user. | |
| 1.3.6.1.4.1.14525.5.0.46 | NotificationtrpzApRejectLicenseExceededTrap | current | This trap is sent when an AC (wireless switch) receives a packet from an inactive AP and attaching that AP would make the AC exceed the maximum (licensed) numb… | |
| 1.3.6.1.4.1.14525.5.0.47 | NotificationtrpzClientDynAuthorChangeSuccessTrap | obsolete | This trap is sent when the authorization attributes for a user are dynamically changed by an authorized dynamic authorization client. Obsoleted by trpzClientDy… | |
| 1.3.6.1.4.1.14525.5.0.48 | NotificationtrpzClientDynAuthorChangeFailureTrap | current | This trap is sent if a change of authorization request sent by an authorized dynamic authorization client is unsuccessful. | |
| 1.3.6.1.4.1.14525.5.0.49 | NotificationtrpzClientDisconnectTrap | obsolete | This trap is sent when a client session is terminated administratively. Obsoleted by trpzClientDisconnectTrap2. | |
| 1.3.6.1.4.1.14525.5.0.50 | NotificationtrpzMobilityDomainFailOverTrap | current | This trap is sent when the Mobility Domain fails over to the secondary seed. | |
| 1.3.6.1.4.1.14525.5.0.51 | NotificationtrpzMobilityDomainFailBackTrap | current | This trap is sent when the Mobility Domain fails back to the primary seed. | |
| 1.3.6.1.4.1.14525.5.0.52 | NotificationtrpzRFDetectRogueDeviceTrap | obsolete | This trap is sent when RF detection finds a rogue device. XmtrMacAddr is the radio MAC address from the beacon. ListenerListInfo is a display string of a list … | |
| 1.3.6.1.4.1.14525.5.0.53 | NotificationtrpzRFDetectRogueDeviceDisappearTrap | current | This trap is sent when a rogue device has disappeared. This trap obsoletes the trpzRFDetectRogueDisappearTrap. | |
| 1.3.6.1.4.1.14525.5.0.54 | NotificationtrpzRFDetectSuspectDeviceTrap | obsolete | This trap is sent when RF detection finds a suspect device. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a… | |
| 1.3.6.1.4.1.14525.5.0.55 | NotificationtrpzRFDetectSuspectDeviceDisappearTrap | current | This trap is sent when a suspect device has disappeared. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. This trap obsoletes the trpzRFDetect… | |
| 1.3.6.1.4.1.14525.5.0.56 | NotificationtrpzRFDetectClientViaRogueWiredAPTrap3 | current | This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. trpzSourceWsIp is the IP address of the AC (switch)… | |
| 1.3.6.1.4.1.14525.5.0.57 | NotificationtrpzRFDetectClassificationChangeTrap | current | This trap is sent when RF detection classification rules change. | |
| 1.3.6.1.4.1.14525.5.0.58 | NotificationtrpzConfigurationSavedTrap | current | This trap is sent when the running configuration of the switch is written to a configuration file. | |
| 1.3.6.1.4.1.14525.5.0.59 | NotificationtrpzApNonOperStatusTrap2 | current | This trap is sent when the AP changes state and the new one is a non-operational state. Obsoletes trpzApNonOperStatusTrap. | |
| 1.3.6.1.4.1.14525.5.0.60 | NotificationtrpzApOperRadioStatusTrap2 | obsolete | This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availabil… | |
| 1.3.6.1.4.1.14525.5.0.61 | NotificationtrpzMichaelMICFailure | current | Two Michael MIC failures were seen within 60 seconds of each other. Object trpzClientMACAddress indicates the source of the first failure, and object trpzClien… | |
| 1.3.6.1.4.1.14525.5.0.62 | NotificationtrpzClientAuthorizationSuccessTrap3 | obsolete | This trap is sent when a client authorizes. If trpzClientAccessMode = 'ap': trpzApNum, trpzAPRadioNum, trpzRadioSSID identify the AP/radio/BSS providing wirele… | |
| 1.3.6.1.4.1.14525.5.0.63 | NotificationtrpzApManagerChangeTrap | current | This trap is sent when the AP's secondary link becomes its primary link. | |
| 1.3.6.1.4.1.14525.5.0.64 | NotificationtrpzClientClearedTrap2 | obsolete | This trap is sent when a client session is cleared. Obsoleted by trpzClientClearedTrap3. | |
| 1.3.6.1.4.1.14525.5.0.65 | NotificationtrpzMobilityDomainResiliencyStatusTrap | current | This trap is sent by a mobility domain seed to announce changes in resilient capacity status. | |
| 1.3.6.1.4.1.14525.5.0.66 | NotificationtrpzApOperRadioStatusTrap3 | current | This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availabil… | |
| 1.3.6.1.4.1.14525.5.0.67 | NotificationtrpzClientAuthorizationSuccessTrap4 | obsolete | This trap is sent when a client authorizes. If trpzClientAccessMode = 'ap': trpzApNum, trpzAPRadioNum, trpzRadioSSID identify the AP/radio/BSS providing wirele… | |
| 1.3.6.1.4.1.14525.5.0.68 | NotificationtrpzRFDetectRogueDeviceTrap2 | current | This trap is sent when RF detection finds a rogue device. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectXmtrRadioType indicates… | |
| 1.3.6.1.4.1.14525.5.0.69 | NotificationtrpzRFDetectSuspectDeviceTrap2 | current | This trap is sent when RF detection finds a suspect device. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectXmtrRadioType indicat… | |
| 1.3.6.1.4.1.14525.5.0.70 | NotificationtrpzClusterFailureTrap | current | This trap is sent when the cluster configuration failed to apply. If trpzClusterFailureReason = 'validation-error': The validation error is reported by the rec… | |
| 1.3.6.1.4.1.14525.5.0.71 | NotificationtrpzMultimediaCallFailureTrap | current | This trap is sent when a multimedia call fails. | |
| 1.3.6.1.4.1.14525.5.0.72 | NotificationtrpzApTunnelLimitExceededTrap | current | This trap is sent by the AP primary controller (PAM) when an AP rejects a tunnel creation request because it has already created the maximum number of tunnels … | |
| 1.3.6.1.4.1.14525.5.0.73 | NotificationtrpzWsTunnelLimitExceededTrap | current | This trap is sent when the AC (wireless switch) rejects a tunnel creation request because it has reached the maximum number of tunnels supported (indicated by … | |
| 1.3.6.1.4.1.14525.5.0.74 | NotificationtrpzRFNoiseSourceTrap | current | This trap is sent upon the appearance of a new noise source. 'trpzRadioMACAddress' indicates the listener (the AP radio reporting the noise). A given combinati… | |
| 1.3.6.1.4.1.14525.5.0.75 | NotificationtrpzM2UConvNotPossibleTrap | current | This trap is sent when multicast to unicast conversion is enabled on the AP, but cannot be performed. | |
| 1.3.6.1.4.1.14525.5.0.76 | NotificationtrpzM2UConvAvailabilityRestoredTrap | current | This trap is sent when the multicast to unicast conversion can be resumed on the AP, after disruption. | |
| 1.3.6.1.4.1.14525.5.0.77 | NotificationtrpzAutoTuneSuccessTrap | current | This trap is sent when an auto-tune operation completed successfully. | |
| 1.3.6.1.4.1.14525.5.0.78 | NotificationtrpzAutoTuneFailureTrap | current | This trap is sent when an auto-tune operation failed to complete. | |
| 1.3.6.1.4.1.14525.5.0.79 | NotificationtrpzClientDeAssociationTrap2 | current | This trap is sent if a client de-association occurred. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS pro… | |
| 1.3.6.1.4.1.14525.5.0.80 | NotificationtrpzClientRoamingTrap2 | current | This trap is sent if a client roams from one location to another. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/ra… | |
| 1.3.6.1.4.1.14525.5.0.81 | NotificationtrpzClientIpAddrChangeTrap2 | current | This trap is sent when an IP address of a client changes. The most likely cases for this are when the client first connects to the network and when a new IPv6 … | |
| 1.3.6.1.4.1.14525.5.0.82 | NotificationtrpzClientDeAuthenticationTrap2 | current | This trap is sent if a client de-authentication occurred. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS … | |
| 1.3.6.1.4.1.14525.5.0.83 | NotificationtrpzClientDynAuthorChangeSuccessTrap2 | current | This trap is sent when the authorization attributes for a user are dynamically changed by an authorized dynamic authorization client. If trpzClientAccessMode =… | |
| 1.3.6.1.4.1.14525.5.0.84 | NotificationtrpzClientDisconnectTrap2 | current | This trap is sent when a client session is terminated administratively. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the… | |
| 1.3.6.1.4.1.14525.5.0.85 | NotificationtrpzClientClearedTrap3 | current | This trap is sent when a client session is cleared. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS provid… | |
| 1.3.6.1.4.1.14525.5.0.86 | NotificationtrpzClientAuthorizationSuccessTrap5 | current | This trap is sent when a client authorizes. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wire… | |
| 1.3.6.1.4.1.14525.5.0.87 | NotificationtrpzClientDeviceTypeChangeTrap | current | This trap is sent when the detected device type of a client changes. The new device type is indicated by trpzClientDeviceType. trpzClientDeviceGroup indicates … | |
| 1.3.6.1.4.1.14525.5.0.88 | NotificationtrpzClientDeviceProfileChangeTrap | current | This trap is sent when the device profile for a client device changes. The new device profile is indicated by trpzClientDeviceProfileName. trpzClientDeviceProf… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| TrpzApMgrChangeReason | INTEGER { other (1), failover (2), load-balancing (3) } | current | Enumeration of the reasons why AP is switching to its secondary link: failover: AP's primary link failed. load-balancing: AP's primary link is overloaded. |
| TrpzAssociationFailureType | INTEGER { other (1), load-balance (2), quiet-period (3), dot1x (4), no-prev-assoc (5), glare (6), cipher-rejected (7), cipher-mismatch (8), wep-not-configured (9), bad-assoc-request (10), out-of-memory (11), tkip-cm-active (12), roam-in-progress (13) } | current | Enumeration of the reasons for an AP to fail a client's 802.11 association |
| TrpzAuthenticationFailureType | INTEGER { other (1), user-glob-mismatch (2), user-does-not-exist (3), invalid-password (4), server-timeout (5), signature-failed (6), local-certificate-error (7), all-servers-down (8), authentication-type-mismatch (9), server-rejected (10), fallthru-auth-misconfig (11), no-lastresort-auth (12), exceeded-max-attempts (13), password-expired (14) } | current | Enumeration of the reasons for AAA authentication to fail user-glob-mismatch - auth rule/user not found for console login user-does-not-exist - login failed because user not found invalid-password - login failed because… |
| TrpzAuthorizationFailureType | INTEGER { other (1), user-param (2), location-policy (3), vlan-tunnel-failure (4), ssid-mismatch (5), acl-mismatch (6), timeofday-mismatch (7), crypto-type-mismatch(8), mobility-profile-mismatch(9), start-date-mismatch (10), end-date-mismatch (11), svr-type-mismatch (12), ssid-defaults (13), qos-profile-mismatch (14), simultaneous-logins (15) } | current | Enumeration of the reasons for AAA authorization failure |
| TrpzAutoTuneFailureReason | INTEGER { other (1), ap-conn-lost (2), ws-conn-lost (3) } | current | Enumeration of the reasons why an auto-tune operation failed: ap-conn-lost: The connection with an AP involved in the auto-tune process was lost. ws-conn-lost: The connection with a wireless switch involved in the auto-… |
| TrpzBlacklistingCause | INTEGER { bl-configured(1), bl-associate-pkt-flood(2), bl-re-associate-pkt-flood(3), bl-de-associate-pkt-flood(4) } | current | Enumeration of reasons for blacklisting a transmitter: bl-configured: administrative action (explicitly added to the Black List), bl-associate-pkt-flood: Association request flood detected, bl-re-associate-pkt-flood: Re… |
| TrpzClientAuthorizationReason | INTEGER { other (1), new-client (2), re-auth (3), roam (4) } | current | Enumeration of the reasons for AAA authorization. |
| TrpzClientClearedReason | INTEGER { other (1), normal (2), backup-failure (3) } | current | Enumeration of the reasons for clearing a session: normal: Session was cleared from the switch as the last step in the normal session termination process. backup-failure: The backup switch could not activate a session f… |
| TrpzClientDeviceProfileChangeReason | INTEGER { other (1), aaa-policy (2), device-type-changed (3) } | current | Enumeration of the reasons for device profile changes. aaa-policy: The device profile has changed due to an AAA policy, after authentication. device-type-changed: The device type has changed. |
| TrpzClientIpAddrChangeReason | INTEGER { client-connected-ipv4(1), other(2), dhcp-to-static(3), ipv6-global-addr(10) } | current | Describes the reasons for client IP address changes: client-connected-ipv4: an IPv4 address was assigned on the initial connection of an IPv4 client, or when an IPv6 client activated the IPv4 stack; other: IPv4 address … |
| TrpzClusterFailureReason | INTEGER { other (1), validation-error (2) } | current | Enumeration of the reasons why the AC goes into cluster failure state: validation-error: Cluster configuration rejected due to validation error. |
| TrpzConfigSaveInitiatorType | INTEGER { other (1), cli-console (2), cli-remote (3), https (4), snmp-set (5) } | current | Enumeration of the sources that can initiate a configuration save: cli-console: configuration save requested from serial console administrative session. cli-remote: configuration save requested from telnet or ssh admini… |
| TrpzDot1xFailureType | INTEGER { other (1), quiet-period (2), administrative-kill (3), bad-rsnie (4), timeout (5), max-sessions-exceeded(6), fourway-hs-failure (7), user-glob-mismatch (8), bonded-auth-failure (9), reauth-disabled (10), gkhs-failure (11), force-unauth-configured (12), cert-not-installed (13) } | current | Enumeration of the dot1x failure reasons. quiet-period occurs when client is denied access for a period of time after a failed connection attempt administrative-kill means that the session was cleared using the 'clear d… |
| TrpzM2UConvNotPossibleReason | INTEGER { other (1), max-conv-limit (2) } | current | Enumeration of the reasons why multicast to unicast conversion cannot be performed. max-conv-limit: The number of required conversions is higher than the defined limit. |
| TrpzMichaelMICFailureCause | INTEGER { detected-by-ap (1), detected-by-client (2) } | current | Describes the cause/source of Michael MIC Failure detection. |
| TrpzMobilityDomainResiliencyStatus | INTEGER { other (1), resilient (2), degraded (3) } | current | Enumeration of the current resilient capacity status for a mobility domain: resilient: Every AP in the mobility domain has a secondary backup link. If the primary switch of an AP failed, the AP and its sessions would fa… |
| TrpzMultimediaCallDirection | INTEGER { incoming (1), outgoing (2) } | current | Enumeration of the multimedia call direction. |
| TrpzMultimediaCallFailureReason | INTEGER { other (1), resource-unavailable (2) } | current | Enumeration of the reasons why a multimedia call fails. |
| TrpzMultimediaSignalingProtocol | INTEGER { other (1), sip (2) } | current | Enumeration of Multimedia Signaling Protocols: protocols for creating, modifying, terminating sessions. The first signaling protocol supported is: sip = Session Initiation Protocol. |
| TrpzRadioBand | INTEGER { bandAN (1), bandBGN (2) } | current | Enumeration of the 802.11 radio bands. 802.11 a/n use the 5 GHz band. 802.11 b/g/n use the 2.4 GHz band. |
| TrpzRFDetectDoSType | INTEGER { probe-flood(1), auth-flood(2), null-data-flood(3), mgmt-6-flood(4), mgmt-7-flood(5), mgmt-d-flood(6), mgmt-e-flood(7), mgmt-f-flood(8), fakeap-ssid(9), fakeap-bssid(10), bcast-deauth(11), null-probe-resp(12), disassoc-spoof(13), deauth-spoof(14), decrypt-err(15), weak-wep-iv(16), wireless-bridge(17), netstumbler(18), wellenreiter(19), adhoc-client-frame(20), associate-pkt-flood(21), re-associate-pkt-flood(22), de-associate-pkt-flood(23), bssid-spoof(24) } | current | The types of denial of service (DoS) attacks |
| TrpzSessionDisconnectType | INTEGER { other (1), admin-disconnect (2), dyn-auth-disconnect (3) } | current | Enumeration of the sources that can initiate the termination of a session: admin-disconnect: session terminated by administrative action (from console, telnet session, WebView, or RingMaster). dyn-auth-disconnect: sessi… |
| TrpzUserAttributeList | DisplayString (SIZE (0..2048)) | current | Display string listing AAA attributes and their values. These strings can be used, for example, in change of authorization notifications. The syntax is: attribute_name1=value1, attribute_name2=value2, ... where attribut… |
| TrpzWsTunnelLimitType | INTEGER { other (1), platform-tunnel-limit (2), ap-ws-tunnel-limit (3) } | current | Enumeration of the type of limit exceeded that caused the AC (wireless switch) to reject a tunnel creation request. The value 'platform-tunnel-limit' (2) corresponds to the maximum tunnel capacity of a switch, which dep… |