TROPIC-ACCESSPORT-MIB
78 objects
DWDM system port MIB attributes.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7483.1.1.2.2.4.1 | IdentitytnAccessPortMibModules | DWDM system port MIB attributes. | ||
| 1.3.6.1.4.1.7483.2.2.4.1.1 | NodetnAccessPortConf | |||
| 1.3.6.1.4.1.7483.2.2.4.1.1.1 | NodetnAccessPortGroups | |||
| 1.3.6.1.4.1.7483.2.2.4.1.1.1.1 | GrouptnAccessPortGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.4.1.1.1.2 | GrouptnIfGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.4.1.1.1.3 | GrouptnSysTopologyGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.4.1.1.2 | NodetnAccessPortCompliances | |||
| 1.3.6.1.4.1.7483.2.2.4.1.1.2.1 | CompliancetnAccessPortCompliance | current | . | |
| 1.3.6.1.4.1.7483.2.2.4.1.2 | NodetnAccessPortObjs | |||
| 1.3.6.1.4.1.7483.2.2.4.1.2.1 | TabletnAccessPortTable | not-accessible | current | The 1696R/1830 NE port table. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1 | RowtnAccessPortEntry | not-accessible | current | The ports on a card. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.1 | ColumntnAccessPortDescr | read-create | current | Access port description. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.2 | ColumntnAccessPortStatusLEDColor | read-only | current | The color of the status LED. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.3 | ColumntnAccessPortStatusLEDState | read-only | current | The state of the status LED. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.4 | ColumntnAccessPortOperationalCapability | read-only | current | . |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.5 | ColumntnAccessPortStateQualifier | read-only | current | . |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.6 | ColumntnAccessPortFarEndAddress | read-create | current | Access port far end address. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.7 | ColumntnAccessPortFarEndIfIndex | read-create | current | Access port far end interface index. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.8 | ColumntnAccessPortFarEndType | read-create | current | Access port far end type. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.9 | ColumntnAccessPortDirection | read-create | current | Access port direction. Setting the direction to unidirectionalRx will turn off the Tx laser, and suppress Tx alarms (including out Wavelength Tracker alarms). … |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.10 | ColumntnAccessPortAINS | read-create | current | If the user has set Port AINS to true, the port admin state is set to up by the system. If the port admin state has been set up or down, Port AINS is set to fa… |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.11 | ColumntnAccessPortAINSDebounceTime | read-create | current | This attribute must be set in multiples of 60s. It is equal to System AINS Debounce Time when Port AINS Use System Default is true. Setting the Port AINS Debou… |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.12 | ColumntnAccessPortUsingSysAINSDebounceTime | read-create | current | Using System AINS Debounce Time. Sets with a value of false are restricted. The network operator must set Port AINS Debounce Time to some valid value to disabl… |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.13 | ColumntnAccessPortAINSDebounceTimeRemaining | read-only | current | Number of seconds until the Port AINS DebounceTime expires. If Port AINS is false or Port AINS Debounce Time is 0, the value of this attribute will be 0. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.14 | ColumntnAccessPortIsDomainEdgePort | read-create | current | For discriminating between ports that are internal to a network composed of 1830 and 1696R network elements and the ports that are at the edge of the network s… |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.15 | ColumntnAccessPortFarEndAddressConnFrom | read-create | current | Access port far end address that points to this port. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.16 | ColumntnAccessPortFarEndIfIndexConnFrom | read-create | current | Access port far end interface that points to this port. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.17 | ColumntnAccessPortFarEndTypeConnFrom | read-create | current | Access port far end type. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.18 | ColumntnAccessPortExtAmpIpAddressIn | read-create | current | The IP address of an external amplifier connected to this port. This attribute is applicable to the line port of an LD card and is reserved for use with a RAMA… |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.19 | ColumntnAccessPortExtAmpIpAddressOut | read-create | current | The IP address of an external amplifier connected from this port. This attribute is applicable to the line port of an LD card and is reserved for use with an E… |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.20 | ColumntnAccessPortWtocmConnLoss | read-create | current | The insertion loss between the LD card MON port and the WTOCM input port. Current configurable range: 0 to 1500. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.21 | ColumntnAccessPortWtocmConnAddress | read-create | current | LD card port connected to WTOCM input port in transmit direction. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.22 | ColumntnAccessPortOppDirectionPortAddress | read-create | current | Address of opposite direction port when the TX and RX directions are split between two ports. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.23 | ColumntnAccessPortIsValidInternalOTSXcEndpoint | read-create | current | Indicates if this is an end point of internal OT cross connect. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.24 | ColumntnAccessPortWtDomainNumber | read-create | current | The numbered domain used for WT key selection for add XCs to this port; applies to external line facing ports. Current configurable range: -1 to 19. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.25 | ColumntnAccessPortHasMpoConnector | read-only | current | Indicates if the logical port underlies a multi-fiber connector. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.26 | ColumntnAccessPortMpoConnectorPortOutIfIndex | read-only | current | Provides the shelf/slot/port of the multi-fiber connector interface corresponding to this logical port in the out direction. Value of 0 indicates no MPO port. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.27 | ColumntnAccessPortMpoConnectorPortInIfIndex | read-only | current | Provides the shelf/slot/port of the multi-fiber connector interface corresponding to this logical port in the in direction. Value of 0 indicates no MPO port. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.28 | ColumntnAccessPortIsMpo | read-only | current | Indicates if the port is itself a MPO port. Retrievable through SNMP for all ports, managed and MPO. True: The port is the port for the MPO connector. False: T… |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.29 | ColumntnAccessPortMonOcmConnAddress | read-create | current | Port monitored by input or connected from output. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.30 | ColumntnAccessPortAlmProfName | read-create | current | . |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.31 | ColumntnAccessPortmfcTemperature | read-only | current | The Ambient temperature applies to the sensor port of the MultiFunctional card. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.32 | ColumntnAccessPortmfcNominalPressure | read-only | current | The nominal pressure applies to the sensor port of the MultiFunctional card. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.33 | ColumntnAccessPortmfcDifferentialPressure | read-only | current | The differential pressure applies to the sensor port of the MultiFunctional card. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.34 | ColumntnAccessFilterAmbientTemperature | read-only | current | Current Ambient Temperature. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.35 | ColumntnAccessFilterPressure | read-only | current | Current Pressure Value. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.36 | ColumntnAccessFilterRecorded | read-only | current | Recorded calibration on clean filter. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.37 | ColumntnAccessFilterCalibrated | read-only | current | Recent filter calibration value. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.38 | ColumntnAccessFilterAltitude | read-only | current | Altitude used in above calibration. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.39 | ColumntnAccessFilterRecordTime | read-only | current | Recorded calibration time. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.40 | ColumntnAccessFilterCalibrateTime | read-only | current | Recent calibration time. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.41 | ColumntnAccessFilterScheduledTime | read-only | current | Next scheduled time for calibration. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.42 | ColumntnAccessPortL2FarEndIfIndex | read-only | current | Access port Layer 2 far end interface index. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.43 | ColumntnAccessPortL2FarEndMacAddress | read-only | current | Access port Layer 2 far end MAC address. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.44 | ColumntnAccessPortDirectionCapability | read-only | current | Access port direction capabilities. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.45 | ColumntnAccessPortCpriMappingType | read-create | current | Specifies the mapping type to map CPRI signals into Ethernet packets. tunneling - map CPRI 10B or 66B line codes are encapsulted into RoE packets. structureAwa… |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.46 | ColumntnAccessPortFecType | read-create | current | Specifies the Forward Error Correction type on the interface port. Enter this keyword without option to display the current value. fectype = rsfec is allowed o… |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.47 | ColumntnAccessPortFecBypassInd | read-create | current | Parameter FecBypassInd (FEC Bypass Indication) determines whether the corresponding option as defined in IEEE 802.3 is set or not. If enabled, this implies: - … |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.48 | ColumntnAccessPortCpriRole | read-create | current | The master/slave role for CPRI interface. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.49 | ColumntnAccessPortAseMode | read-create | current | . |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.50 | ColumntnAccessPortRole | read-only | current | . |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.51 | ColumntnAccessPortFacilityDescriptorName | read-create | current | . |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.52 | ColumntnAccessPortFacilityDescriptorDesc | read-create | current | . |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.53 | ColumntnAccessPortFacilityDescriptorCirId | read-create | current | . |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.54 | ColumntnAccessPortAlienWavebank | read-create | current | . |
| 1.3.6.1.4.1.7483.2.2.4.1.2.1.1.55 | ColumntnAccessPortModuleReset | read-create | current | . |
| 1.3.6.1.4.1.7483.2.2.4.1.2.2 | TabletnIfTable | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.2.4.1.2.2.1 | RowtnIfEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.2.4.1.2.2.1.1 | ColumntnIfPhysicalLocation | read-only | current | . |
| 1.3.6.1.4.1.7483.2.2.4.1.2.2.1.2 | ColumntnIfType | read-create | current | In a set request, value default indicates that the NE assigns the port automatically, if possible. A value of default will not be returned to the network opera… |
| 1.3.6.1.4.1.7483.2.2.4.1.2.2.1.3 | ColumntnIfSupportedTypes | read-only | current | The supported types. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.2.1.4 | ColumntnIfSupportedTypesAlternate | read-only | current | The supported types as an octet string. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.2.1.5 | ColumntnIfForceAdminStatus | read-create | current | Setting this attribute to execute will force an ifAdminStatus change. This works only for an ifAdminStatus of down. When queried, this attribute returns a valu… |
| 1.3.6.1.4.1.7483.2.2.4.1.2.2.1.6 | ColumntnIfnumofTimeSlots | read-only | current | The number of time slot if tnIfType is oduflex. If tnIfType is non-Oduflex, tnIfnumofTimeSlots is always zero. |
| 1.3.6.1.4.1.7483.2.2.4.1.2.2.1.7 | ColumntnIfAlmProfName | read-create | current | . |
| 1.3.6.1.4.1.7483.2.2.4.1.2.3 | NodetnAccessPortScalarObjs | |||
| 1.3.6.1.4.1.7483.2.2.4.1.2.3.1 | NodetnSysTopology | |||
| 1.3.6.1.4.1.7483.2.2.4.1.2.3.1.1 | ScalartnSysTopologyAudit | read-only | current | When read, this attribute will return the result of an audit of the physical topology of the network element. It will have the following format: <n>:<ifIndex 1… |