TROPIC-AMPLIFIER-MIB
209 objects
Amplifier MIB types.
Imported Objects
| IF-MIB | ifIndex InterfaceIndexOrZero |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TruthValue |
| TROPIC-GLOBAL-REG | tnAmplifierMIB tnCardModules |
| TROPIC-SHELF-MIB | tnShelfIndex |
| TROPIC-SLOT-MIB | tnSlotIndex |
| TROPIC-TC | NokiaAmpPortTargetPowerWidth TnCommand |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7483.1.1.2.2.3.4 | IdentitytnAmplifierMibModule | Amplifier MIB types. | ||
| 1.3.6.1.4.1.7483.2.2.3.7.1 | NodetnAmplifierConf | |||
| 1.3.6.1.4.1.7483.2.2.3.7.1.1 | NodetnAmplifierGroups | |||
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.1 | NodetnAmplifierPortConfigGroups | |||
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.1.1 | GrouptnAmplifierPortConfigScalarsGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.1.2 | GrouptnAmplifierPortConfigGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.1.3 | GrouptnAmplifierHybridPortConfigScalarsGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.1.4 | GrouptnAmplifierHybridPortConfigGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.2 | NodetnAmplifierPortInfoGroups | |||
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.2.1 | GrouptnAmplifierPortInfoScalarsGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.2.2 | GrouptnAmplifierPortInfoGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.2.3 | GrouptnAmplifierMeshPortInfoScalarsGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.2.4 | GrouptnAmplifierMeshPortInfoGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.2.5 | GrouptnAmplifierHybridPortInfoScalarsGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.2.6 | GrouptnAmplifierHybridPortInfoGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.3 | NodetnAmplifierCardInfoGroups | |||
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.3.1 | GrouptnAmplifierCardInfoScalarsGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.3.2 | GrouptnAmplifierCardInfoGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.3.3 | GrouptnAmplifierMeshCardInfoScalarsGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.3.4 | GrouptnAmplifierMeshCardInfoGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.3.5 | GrouptnAmplifierHybridCardInfoScalarsGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.3.6 | GrouptnAmplifierHybridCardInfoGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.4 | NodetnAmplifierCardConfigGroups | |||
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.4.1 | GrouptnAmplifierCardConfigScalarsGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.4.2 | GrouptnAmplifierCardConfigGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.4.3 | GrouptnAmplifierMeshCardConfigScalarsGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.1.4.4 | GrouptnAmplifierMeshCardConfigGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.2 | NodetnAmplifierCompliances | |||
| 1.3.6.1.4.1.7483.2.2.3.7.1.2.1 | NodetnAmplifierPortConfigCompliances | |||
| 1.3.6.1.4.1.7483.2.2.3.7.1.2.1.1 | CompliancetnAmplifierPortConfigCompliance | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.2.2 | NodetnAmplifierPortInfoCompliances | |||
| 1.3.6.1.4.1.7483.2.2.3.7.1.2.2.1 | CompliancetnAmplifierPortInfoCompliance | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.2.3 | NodetnAmplifierCardInfoCompliances | |||
| 1.3.6.1.4.1.7483.2.2.3.7.1.2.3.1 | CompliancetnAmplifierCardInfoCompliance | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.1.2.4 | NodetnAmplifierCardConfigCompliances | |||
| 1.3.6.1.4.1.7483.2.2.3.7.1.2.4.1 | CompliancetnAmplifierCardConfigCompliance | current | . | |
| 1.3.6.1.4.1.7483.2.2.3.7.4 | NodetnAmplifierPortConfig | |||
| 1.3.6.1.4.1.7483.2.2.3.7.4.1 | ScalartnAmplifierPortConfigAttributeTotal | read-only | current | Total number of attributes in tnAmplifierPortConfigTable. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2 | TabletnAmplifierPortConfigTable | not-accessible | current | The provisioned ports on an amplifier card. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1 | RowtnAmplifierPortConfigEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.1 | ColumntnAmplifierPortPowerGain | read-create | current | The following description applies to the signal port of the amplifier card: Current configurable ranges and defaults: A2325A: (1600..3200), 1600 A2P2125 (port … |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.2 | ColumntnAmplifierPortPowerGainMin | read-create | current | The following description applies to the signal port of the amplifier card: This value is used by power management. Current configurable ranges and defaults: A… |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.3 | ColumntnAmplifierPortPowerGainMax | read-create | current | The following description applies to the signal port of the amplifier card: This value is used by power management. Current configurable ranges and defaults: A… |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.4 | ColumntnAmplifierPortPowerGainBackoff | read-create | current | The following description applies to the signal port of the amplifier card: The adjustment made to min/max gain by power management when commissioning. Current… |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.5 | ColumntnAmplifierPortEnable | read-create | current | The following description applies to the signal port of the amplifier card: This attribute allows a network operator to kick start the laser. Setting a value o… |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.6 | ColumntnAmplifierPortAutoReEnableMode | read-create | current | The following description applies to the ampOutThruIn port of the amplifier card: Auto re-enable mode. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.8 | ColumntnAmplifierPortPowerSpanRepairMargin | read-only | current | The following description applies to the signal port of the amplifier card: EPT - splice margin. This is calculated as the absolute value of the difference bet… |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.9 | ColumntnAmplifierPortPowerDeltaMax | read-create | current | The following description applies to the signal port of the amplifier card: EPT - delta max. Current configurable range: 0 to 500. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.10 | ColumntnAmplifierPortTargetTilt | read-create | current | The following description applies to the signal port of the amplifier card: EPT - Tilt. Configurable ranges and defaults: A2325A: (-300.. 0), 0 A2P2125: (-300.… |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.11 | ColumntnAmplifierPortFunction | read-only | current | Indicates the functional type of the amplifier card. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.12 | ColumntnAmplifierPortAprDisable | read-create | current | The Auto Power Recovery Disable. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.13 | ColumntnAmplifierPortSRSTiltACoeffDCM | read-create | current | Modeling coefficient for the SRSTilt = A*Pout(mW) equation, for DCM. Current configurable range: 0 to 10000. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.14 | ColumntnAmplifierPortMaxFlatGainOffset | read-create | current | Provides a correction to the assumed max flat gain value. Current configurable range: -500 to 500. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.15 | ColumntnAmplifierPortGainTilt | read-only | current | Current OA tilt setting for the signal port of the amplifier card. Current ranges: AM2625A: -600 to -100 AM2032A: -300 to 0 ASWG: -400 to 400 A4PSWG: -400 to 4… |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.16 | ColumntnAmplifierPortAprHoldOffTime | read-create | current | The auto power recovery hold off time. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.17 | ColumntnAmplifierPortLosMode | read-create | current | The Amplifier Port LOS Mode. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.18 | ColumntnAmplifierPortSignalFailThreshold | read-create | current | Integer range 4 to 5, representing 10**4 to 10**5. Current configurable range: 4 to 5. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.19 | ColumntnAmplifierPortSignalDegradeThreshold | read-create | current | Integer range 5 to 9, representing 10**5 to 10**9. Current configurable range: 5 to 9. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.20 | ColumntnAmplifierPortVoaSet | read-create | current | The following description applies to the LINEOUT port of the uni-directionalamplifier card: Current configurable range: 0 to 1800. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.21 | ColumntnAmplifierPortGainRange | read-create | current | Gain range for ASWG/A4PSWG cards. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.22 | ColumntnAmplifierPortAprMode | read-create | current | APR Mode for ASWG/A4PSWG cards. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.23 | ColumntnAmplifierPortOperatingMode | read-create | current | ASE Mode for ASWG/A4PSWG cards. Set to power (node sets LD to LOSN as well) Set to gain (node sets LD to LOSA as well). |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.24 | ColumntnAmplifierPortSignalPowerTarget | read-create | current | Value used when tnAmplifierPortOperatingMode is in power mode. Current configurable range: -400 to 1000. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.25 | ColumntnAmplifierPortPowerGainL | read-create | current | Specifies the amplifier gain. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.26 | ColumntnAmplifierPortPowerGainMinL | read-create | current | Specifies the minimum EDFA gain. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.27 | ColumntnAmplifierPortPowerGainMaxL | read-create | current | Specifies the maximum EDFA gain. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.28 | ColumntnAmplifierPortPowerDeltaMaxL | read-create | current | Specifies the maximum allowed difference between the provisioned gain and the measured gain before an alarm is raised. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.29 | ColumntnAmplifierPortGainRangeL | read-create | current | Specifies the EDFA gain range.. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.30 | ColumntnAmplifierPortTargetTiltL | read-create | current | Specifies the amplifier tilt value used by the system. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.31 | ColumntnAmplifierPortVoaSetL | read-create | current | Specifies the output VOA setting. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.32 | ColumntnAmplifierPortGainTiltL | read-only | current | Current OA tilt setting for the signal port of the amplifier card for L band. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.33 | ColumntnAmplifierPortPowerGainBackoffL | read-create | current | The following description applies to the signal port of the amplifier card for L band: The adjustment made to min/max gain by power management when commissioni… |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.34 | ColumntnAmplifierPortPowerSpanRepairMarginL | read-only | current | The following description applies to the signal port of the amplifier card for L Band: EPT - splice margin. This is calculated as the absolute value of the dif… |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.35 | ColumntnAmplifierPortOperatingModeL | read-create | current | ASE Mode for ASWG/A4PSWG cards for L-Band. Set to power (node sets LD to LOSN as well) Set to gain (node sets LD to LOSA as well). |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.36 | ColumntnAmplifierPortSignalPowerTargetL | read-create | current | Value used when tnAmplifierPortOperatingModeL is in power mode for L-Band. Current configurable range: -400 to 1000. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.37 | ColumntnAmplifierPortUserSelectedExteriorDcmPresentIn | read-create | current | Manage external DCM. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.38 | ColumntnAmplifierPortUserSelectedExteriorDcmPresentOut | read-create | current | Manage external DCM. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.39 | ColumntnAmplifierPortBandMode | read-create | current | This attribute determines if the LD is operating in a single or dual band. If in a single band mode, only the provisioned band attributes are made availabe to … |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.40 | ColumntnAmplifierPortLosModeL | read-create | current | The Amplifier Port LOS Mode in L band. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.41 | ColumntnAmplifierPortBoosterTargetPowerIn | read-create | current | Target Power Per Channel. Current configurable range: -500 to 600. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.42 | ColumntnAmplifierPortAprEDFApulse | read-create | current | APR EDFA Pulsing. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.43 | ColumntnAmplifierPortLineDcmConnAddress | read-create | current | . |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.44 | ColumntnAmplifierPortAPREDFAPulseAttempt | read-create | current | APR pulse attempt. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.45 | ColumntnAmplifierPortSpanLossTh | read-create | current | Span loss threshold . |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.46 | ColumntnAmplifierPortAsellLink | read-create | current | . |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.47 | ColumntnAmplifierPortTargetPowerWidth | read-create | current | . |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.48 | ColumntnAmplifierPortTargetPowerWidthL | read-create | current | . |
| 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.49 | ColumntnAmplifierPortAsellLinkL | read-create | current | . |
| 1.3.6.1.4.1.7483.2.2.3.7.4.3 | ScalartnAmplifierHybridPortConfigAttributeTotal | read-only | current | Total number of attributes in tnAmplifierHybridPortConfigTable. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.4 | TabletnAmplifierHybridPortConfigTable | not-accessible | current | The provisioned ports on an hybrid amplifier card. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.4.1 | RowtnAmplifierHybridPortConfigEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.2.3.7.4.4.1.1 | ColumntnAmplifierHybridPortVoaAttenuation | read-create | current | Hybrid amplifier port VOA attenuation. Current configurable range: 0 to 2000. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.4.1.2 | ColumntnAmplifierHybridPortInitialMidLoss | read-create | current | Hybrid amplifier port initial VOA attenuation. Current configurable range: 0 to 2000. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.4.1.3 | ColumntnAmplifierHybridPortInitialAgcTargetGain | read-create | current | Hybrid amplifier port initial AGC target gain. Current configurable range: 200 to 2000. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.4.1.4 | ColumntnAmplifierHybridPortVoaMinAttenuation | read-create | current | Hybrid amplifier port VOA minimum attenuation. Current configurable range: 0 to 2000. |
| 1.3.6.1.4.1.7483.2.2.3.7.4.4.1.5 | ColumntnAmplifierHybridPortVoaMaxAttenuation | read-create | current | Hybrid amplifier port VOA maximum attenuation. Current configurable range: 0 to 2000. |
| 1.3.6.1.4.1.7483.2.2.3.7.5 | NodetnAmplifierPortInfo | |||
| 1.3.6.1.4.1.7483.2.2.3.7.5.1 | ScalartnAmplifierPortInfoAttributeTotal | read-only | current | Total number of attributes in tnAmplifierPortInfoTable. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2 | TabletnAmplifierPortInfoTable | not-accessible | current | The equipped ports on an amplifier card. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1 | RowtnAmplifierPortInfoEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.1 | ColumntnAmplifierPortInternalAmpModuleTemperature | read-only | current | The following description applies to the signal port of the amplifier card: The temperature of the laser. Current range: -5 to 35. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.2 | ColumntnAmplifierPortPowerIn | read-only | current | The following description applies to the fromDcm and line ports of the amplifier card: The total input power Current ranges: ASWG: -9900, -3600 to 1700 A4PSWG:… |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.3 | ColumntnAmplifierPortPowerOut | read-only | current | The following description applies to the signal and toDcm ports of the amplifier card: The total output power. Current ranges: AM2625A: -9900, -900 to 2900 AM2… |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.4 | ColumntnAmplifierPortSignalPowerOut | read-only | current | The following description applies to the signal port of the amplifier card: The total input power plus the programmed gain. Current Ranges: ASWG: -9900, -1100 … |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.5 | ColumntnAmplifierPortInputToOutputGain | read-only | current | The following description applies to the LINEOUT port of the uni-directional amplifier card. Current Ranges: ASWG: -9900, -300 to 2900 A4PSWG: -9900, -300 to 2… |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.6 | ColumntnAmplifierPortDCMInPower | read-only | current | The following description applies to the DCM In port of the amplifier card. -9900 indicates no measured power. Current range: -9900, -3000 to 2000. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.7 | ColumntnAmplifierPortDCMOutPower | read-only | current | The following description applies to the DCM Out port of the amplifier card. -9900 indicates no measured power. Current range: -9900, -3000 to 2000. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.8 | ColumntnAmplifierPortActualTilt | read-only | current | The following description applies to the signal port of the amplifier card: Current range: -1000 to 500. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.9 | ColumntnAmplifierPortWtOcmMonitorPortOut | read-only | current | The associated WTOCM In port associated to the LD. Current range: 0 to 0xFFFFFFFF. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.10 | ColumntnAmplifierPortOSCTxPowerIn | read-only | current | The EDFA module OSC transmitted input power of the amplifier card. -9900 indicates no measured power. Current ranges: A2P2125: -1500 to 1100 AM2032A: -1500 to … |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.11 | ColumntnAmplifierPortOSCTxPowerOut | read-only | current | The EDFA module OSC transmitted output power of the amplifier card. -9900 indicates no measured power. Current ranges: A2P2125: -1500 to 1100 AA2DONW: -1500 to… |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.12 | ColumntnAmplifierPortTestingActive | read-only | current | Node sets to true when testing in progress on port (logic). |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.13 | ColumntnAmplifierCommonEgressOutputPower | read-only | current | Calculated in scot when tiltadj is triggered.Referes to the Target output power per channel,adjusted for the C+L Interaction. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.14 | ColumntnAmplifierActOutAtten | read-only | current | Actual amplifier attenuation available on the AWBxx packs only. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.15 | ColumntnAmplifierCommonEgressOutputPowerL | read-only | current | Calculated in scot when tiltadj is triggered.Referes to the Target output power per channel,adjusted for the C+L Interaction. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.16 | ColumntnAmplifierActOutAttenL | read-only | current | Actual amplifier attenuation available on the AWBxx packs only for L Band. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.17 | ColumntnAmplifierPortActualTiltL | read-only | current | The following description applies to the signal port of the amplifier card for L band: Current range: -1000 to 500. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.18 | ColumntnAmplifierPortSignalPowerOutL | read-only | current | The following description applies to the signal port of the amplifier card for L band: The total input power plus the programmed gain. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.19 | ColumntnAmplifierPortInputToOutputGainL | read-only | current | The following description applies to the LINEOUT port of the uni-directional amplifier card for L band. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.20 | ColumntnAmplifierPortOSCTxPowerOutL | read-only | current | The EDFA module OSC transmitted output power of the amplifier card. -9900 indicates no measured power. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.21 | ColumntnAmplifierPortPowerInL | read-only | current | EDFA module total input power L band. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.22 | ColumntnAmplifierPortInfoOSCRxPowerIn | read-only | current | The EDFA module OSC received input power to the card. -9900 indicates no measured power. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.23 | ColumntnAmplifierPortInfoOSCSfpTxPowerOut | read-only | current | The OSCSFP transceiver output power -9900 indicates no measured power. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.24 | ColumntnAmplifierPortInfoOSCSfpRxPowerIn | read-only | current | The OSCSFP transceiver input power -9900 indicates no measured power. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.25 | ColumntnAmplifierPortBoosterTargetPowerOut | read-only | current | Target Power Per Channel. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.26 | ColumntnAmplifierPortPowerOutL | read-only | current | Total output power for L Band. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.27 | ColumntnAmplifierPortSpanLoss | read-only | current | Span loss. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.28 | ColumntnAmplifierPortAprEDFApulsePower | read-only | current | Apr EDFA pulse Power. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.3 | ScalartnAmplifierMeshPortInfoAttributeTotal | read-only | current | Total number of attributes in tnAmplifierMeshPortInfoTable. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.4 | TabletnAmplifierMeshPortInfoTable | not-accessible | current | The equipped ports on a mesh card. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.4.1 | RowtnAmplifierMeshPortInfoEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.2.3.7.5.4.1.1 | ColumntnAmplifierMeshPortPowerOut | read-only | current | The following description applies to the output port of the mesh card: The total output power. -9900 indicates no measured power. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.4.1.2 | ColumntnAmplifierMeshPortSignalPowerOut | read-only | current | The following description applies to the output port of the mesh card: The total input power plus the programmed gain. -9900 indicates no measured power. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.4.1.3 | ColumntnAmplifierMeshPortInputToOutputGain | read-only | current | The following description reports the gain from sigIn to sigOut ports of the MESH4 card: OA module gain - EVOA loss - SEEPROM loss of splitter. Current range: … |
| 1.3.6.1.4.1.7483.2.2.3.7.5.5 | ScalartnAmplifierHybridPortInfoAttributeTotal | read-only | current | Total number of attributes in tnAmplifierHybridPortInfoTable. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.6 | TabletnAmplifierHybridPortInfoTable | not-accessible | current | The equipped ports on an hybrid amplifier card. |
| 1.3.6.1.4.1.7483.2.2.3.7.5.6.1 | RowtnAmplifierHybridPortInfoEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.2.3.7.5.6.1.1 | ColumntnAmplifierHybridPortInternalAmpModuleTemperature | read-only | current | Hybrid Amplifier Port Internal Module Temperature. |
| 1.3.6.1.4.1.7483.2.2.3.7.6 | NodetnAmplifierCardInfo | |||
| 1.3.6.1.4.1.7483.2.2.3.7.6.1 | ScalartnAmplifierCardInfoAttributeTotal | read-only | current | Total number of attributes in tnAmplifierCardInfoTable. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2 | TabletnAmplifierCardInfoTable | not-accessible | current | The equipped pumps and other values on an amplifier card. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1 | RowtnAmplifierCardInfoEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.1 | ColumntnAmplifierCardOAMPump1Temperature | read-only | current | The current temperature of the OA Laser Pump 1. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.2 | ColumntnAmplifierCardOAMPump2Temperature | read-only | current | The current temperature of the OA Laser Pump 2. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.3 | ColumntnAmplifierCardOAMPump3Temperature | read-only | current | The current temperature of the OA Laser Pump 3. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.4 | ColumntnAmplifierCardOAMPump1Bias | read-only | current | The current bias of the OA Laser Pump 1. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.5 | ColumntnAmplifierCardOAMPump2Bias | read-only | current | The current bias of the OA Laser Pump 2. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.6 | ColumntnAmplifierCardOAMPump3Bias | read-only | current | The current bias of the OA Laser Pump 3. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.7 | ColumntnAmplifierCardOptIntSpanLoss | read-only | current | The span loss value. Current range: 0 to 9900. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.8 | ColumntnAmplifierCardOAMPump4Temperature | read-only | current | The current temperature of the OA Laser Pump 4. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.9 | ColumntnAmplifierCardOAMPump5Temperature | read-only | current | The current temperature of the OA Laser Pump 5. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.10 | ColumntnAmplifierCardOAMPump6Temperature | read-only | current | The current temperature of the OA Laser Pump 6. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.11 | ColumntnAmplifierCardOAMPump4Bias | read-only | current | The current bias of the OA Laser Pump 4. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.12 | ColumntnAmplifierCardOAMPump5Bias | read-only | current | The current bias of the OA Laser Pump 5. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.13 | ColumntnAmplifierCardOAMPump6Bias | read-only | current | The current bias of the OA Laser Pump 6. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.14 | ColumntnAmplifierCardOAMLPump1Temperature | read-only | current | The current temperature of the OA Laser Pump 1 for L Band. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.15 | ColumntnAmplifierCardOAMLPump2Temperature | read-only | current | The current temperature of the OA Laser Pump 2 for L Band. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.16 | ColumntnAmplifierCardOAMLPump3Temperature | read-only | current | The current temperature of the OA Laser Pump 3 for L Band. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.17 | ColumntnAmplifierCardOAMLPump4Temperature | read-only | current | The current temperature of the OA Laser Pump 4 for L Band. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.18 | ColumntnAmplifierCardOAMLPump1Bias | read-only | current | The current bias of the OA Laser Pump 1 for L Band. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.19 | ColumntnAmplifierCardOAMLPump2Bias | read-only | current | The current bias of the OA Laser Pump 2 for L Band. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.20 | ColumntnAmplifierCardOAMLPump3Bias | read-only | current | The current bias of the OA Laser Pump 3 for L Band. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.21 | ColumntnAmplifierCardOAMLPump4Bias | read-only | current | The current bias of the OA Laser Pump 4 for L Band. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.22 | ColumntnAmplifierCardOAM1PumpTemperatures | read-only | current | String containing number of pumps for the 1st optical amplifier on the card, followed by the pump temperature for each pump. For IROADM9R OAM1 is the ingress O… |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.23 | ColumntnAmplifierCardOAM2PumpTemperatures | read-only | current | String containing number of pumps for the 2nd OA module on the card, followed by the pump temperature for each pump. For IROADM9R OAM2 is the egress OA module. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.24 | ColumntnAmplifierCardOAM1PumpBiases | read-only | current | String containing number of pumps for the 1st optical amplifier on the card, followed by the pump bias current for each pump. For IROADM9R OAM1 is the ingress … |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.25 | ColumntnAmplifierCardOAM2PumpBiases | read-only | current | String containing number of pumps for the 2nd optical amplifier on the card, followed by the pump bias current for each pump. For IROADM9R OAM2 is the egress O… |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.26 | ColumntnAmplifierCardOAM3PumpTemperatures | read-only | current | String containing number of pumps for the 3rd OA module on the card, followed by the pump temperature for each pump. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.27 | ColumntnAmplifierCardOAM3PumpBiases | read-only | current | String containing number of pumps for the 3rd optical amplifier on the card, followed by the pump bias current for each pump. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.3 | ScalartnAmplifierMeshCardInfoAttributeTotal | read-only | current | Total number of attributes in tnAmplifierMeshCardInfoTable. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.4 | TabletnAmplifierMeshCardInfoTable | not-accessible | current | The measured values on an amplifier module in a mesh card. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.4.1 | RowtnAmplifierMeshCardInfoEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.2.3.7.6.4.1.1 | ColumntnAmplifierMeshCardInternalTemperature | read-only | current | The following description applies to the amplifier module in the mesh card: The temperature of the laser. Current range: MESH4: -5 to 35. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.4.1.2 | ColumntnAmplifierMeshCardPowerIn | read-only | current | The following description applies to the input port of the amplifier module in the mesh card: The total input power. -9900 indicates no measured power. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.4.1.3 | ColumntnAmplifierMeshCardPowerOut | read-only | current | The following description applies to the output port of the amplifier module in the mesh card: The total output power. -9900 indicates no measured power. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.4.1.4 | ColumntnAmplifierMeshCardSignalPowerOut | read-only | current | The following description applies to the output port of the amplifier module in the mesh card: The total input power plus the programmed gain. -9900 indicates … |
| 1.3.6.1.4.1.7483.2.2.3.7.6.4.1.5 | ColumntnAmplifierMeshCardInputToOutputGain | read-only | current | The following description applies to the output port of the amplifier module in the mesh card: Current range: MESH4: -1100 to 2400. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.4.1.6 | ColumntnAmplifierMeshCardGainTilt | read-only | current | Current OA tilt setting for the output port of the amplifier module in the mesh card. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.4.1.7 | ColumntnAmplifierMeshCardActualTilt | read-only | current | The following description applies to the output port of the amplifier module in the mesh card: Current range: MESH4: -1000 to 500. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.5 | ScalartnAmplifierHybridCardInfoAttributeTotal | read-only | current | Total number of attributes in tnAmplifierHybridCardInfoTable. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.6 | TabletnAmplifierHybridCardInfoTable | not-accessible | current | The measured values on an amplifier module in a mesh card. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.6.1 | RowtnAmplifierHybridCardInfoEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.1 | ColumntnAmplifierHybridCardOAMPump1Temperature | read-only | current | The current temperature of the OA Laser Pump 1. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.2 | ColumntnAmplifierHybridCardOAMPump2Temperature | read-only | current | The current temperature of the OA Laser Pump 2. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.3 | ColumntnAmplifierHybridCardOAMPump1Bias | read-only | current | The current bias of the OA Laser Pump 1. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.4 | ColumntnAmplifierHybridCardOAMPump2Bias | read-only | current | The current bias of the OA Laser Pump 2. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.5 | ColumntnAmplifierHybridCardOAMPump3Temperature | read-only | current | The current temperature of the OA Laser Pump 3. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.6 | ColumntnAmplifierHybridCardOAMPump4Temperature | read-only | current | The current temperature of the OA Laser Pump 4. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.7 | ColumntnAmplifierHybridCardOAMPump3Bias | read-only | current | The current bias of the OA Laser Pump 3. |
| 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.8 | ColumntnAmplifierHybridCardOAMPump4Bias | read-only | current | The current bias of the OA Laser Pump 4. |
| 1.3.6.1.4.1.7483.2.2.3.7.7 | NodetnAmplifierCardConfig | |||
| 1.3.6.1.4.1.7483.2.2.3.7.7.1 | ScalartnAmplifierCardConfigAttributeTotal | read-only | current | Total number of attributes in tnAmplifierCardConfigTable. |
| 1.3.6.1.4.1.7483.2.2.3.7.7.2 | TabletnAmplifierCardConfigTable | not-accessible | current | The configurable values on an amplifier card. |
| 1.3.6.1.4.1.7483.2.2.3.7.7.2.1 | RowtnAmplifierCardConfigEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.2.3.7.7.2.1.1 | ColumntnAmplifierCardOptIntDetection | read-create | current | The status of the Optical Intrusion detection feature. |
| 1.3.6.1.4.1.7483.2.2.3.7.7.2.1.2 | ColumntnAmplifierCardOptIntBaseline | read-create | current | The optical intrusion baseline value, with -100 means no value has been set. Current configurable range: -100, 100 to 5000. |
| 1.3.6.1.4.1.7483.2.2.3.7.7.2.1.3 | ColumntnAmplifierCardOptIntLossThreshold | read-create | current | The optical intrusion loss threshold value. Current configurable range: 100 to 500. |
| 1.3.6.1.4.1.7483.2.2.3.7.7.2.1.4 | ColumntnAmplifierCardOptIntPollPeriod | read-create | current | The optical intrusion poll period. Current configurable range: 20 to 120. |
| 1.3.6.1.4.1.7483.2.2.3.7.7.2.1.5 | ColumntnAmplifierCardOptIntClearAlarm | read-create | current | Clears optical intrusion alarm. |
| 1.3.6.1.4.1.7483.2.2.3.7.7.2.1.6 | ColumntnAmplifierCardAsonAddDropPlannedForOps | read-create | current | Used for ASON nodes running GMRE. The value indicates if an LD defining the add/drop block has been planned to accept OPSA OCH protected services. |
| 1.3.6.1.4.1.7483.2.2.3.7.7.3 | ScalartnAmplifierMeshCardConfigAttributeTotal | read-only | current | Total number of attributes in tnAmplifierMeshCardConfigTable. |
| 1.3.6.1.4.1.7483.2.2.3.7.7.4 | TabletnAmplifierMeshCardConfigTable | not-accessible | current | The provisioned parameters on an amplifier module in a mesh card. |
| 1.3.6.1.4.1.7483.2.2.3.7.7.4.1 | RowtnAmplifierMeshCardConfigEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.2.3.7.7.4.1.1 | ColumntnAmplifierMeshCardPowerGain | read-create | current | The following description applies to the output port of the amplifier module in the mesh card: Current configurable range: MESH4: 700 to 2400. |
| 1.3.6.1.4.1.7483.2.2.3.7.7.4.1.2 | ColumntnAmplifierMeshCardPowerGainMin | read-create | current | The following description applies to the output port of the amplifier module in the mesh card: This value is used by power management. Current configurable ran… |
| 1.3.6.1.4.1.7483.2.2.3.7.7.4.1.3 | ColumntnAmplifierMeshCardPowerGainMax | read-create | current | The following description applies to the output port of the amplifier module in the mesh card: This value is used by power management. Current configurable ran… |
| 1.3.6.1.4.1.7483.2.2.3.7.7.4.1.4 | ColumntnAmplifierMeshCardTargetTilt | read-create | current | The following description applies to the output port of the amplifier module in the mesh card: EPT - Tilt. Current configurable range: MESH4: -400 to 400. |
| 1.3.6.1.4.1.7483.2.2.3.7.7.4.1.5 | ColumntnAmplifierMeshCardVoaSet | read-create | current | The following description applies to the output port of the amplifier module in the mesh card: Current configurable range: MESH4: 0 to 1800. |
| 1.3.6.1.4.1.7483.2.2.3.7.7.4.1.6 | ColumntnAmplifierMeshCardCommonEgressPower | read-create | current | Common Egress Power. This is the per channel default egress power Current configurable range: MESH4: -1000 to 1000. |