TROPIC-L1SERVICE-MIB
332 objects
Control Network and APS MIB.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7483.1.1.2.3.1 | IdentitytnL1ServiceMibModule | Control Network and APS MIB. | ||
| 1.3.6.1.4.1.7483.2.3.1.1 | NodetnL1ServiceConf | |||
| 1.3.6.1.4.1.7483.2.3.1.1.1 | NodetnL1ServiceGroups | |||
| 1.3.6.1.4.1.7483.2.3.1.1.1.1 | GrouptnControlNetworkLinkGroup | current | . | |
| 1.3.6.1.4.1.7483.2.3.1.1.1.2 | GrouptnCNLinkViaChannelGroup | current | . | |
| 1.3.6.1.4.1.7483.2.3.1.1.1.3 | GrouptnIpStaticRouteGroup | deprecated | . | |
| 1.3.6.1.4.1.7483.2.3.1.1.1.4 | GrouptnIpCidrRouteGroup | current | . | |
| 1.3.6.1.4.1.7483.2.3.1.1.1.5 | GrouptnL1TrafficParmGroup | current | . | |
| 1.3.6.1.4.1.7483.2.3.1.1.1.6 | GrouptnIpRouteGlobalGroup | current | . | |
| 1.3.6.1.4.1.7483.2.3.1.1.1.7 | GrouptnStaticRouteGroup | current | . | |
| 1.3.6.1.4.1.7483.2.3.1.1.1.10 | GrouptnApsGroup | current | . | |
| 1.3.6.1.4.1.7483.2.3.1.1.1.11 | GrouptnApsMemberGroup | current | . | |
| 1.3.6.1.4.1.7483.2.3.1.1.1.13 | GrouptnControlNetworkMapGroup | current | . | |
| 1.3.6.1.4.1.7483.2.3.1.1.1.14 | GrouptnNetIfGroup | current | . | |
| 1.3.6.1.4.1.7483.2.3.1.1.1.15 | GrouptnNetIfFacilityGroup | current | . | |
| 1.3.6.1.4.1.7483.2.3.1.1.1.16 | GrouptnPackApsGroup | current | . | |
| 1.3.6.1.4.1.7483.2.3.1.1.1.17 | GrouptnEthIfGroup | current | . | |
| 1.3.6.1.4.1.7483.2.3.1.1.1.18 | GrouptnEthIfInterfaceGroup | current | . | |
| 1.3.6.1.4.1.7483.2.3.1.1.1.19 | GrouptnDhcpRelayRecordGroup | current | . | |
| 1.3.6.1.4.1.7483.2.3.1.1.1.20 | GrouptnDhcpServerGroup | current | . | |
| 1.3.6.1.4.1.7483.2.3.1.1.2 | NodetnL1ServiceCompliances | |||
| 1.3.6.1.4.1.7483.2.3.1.1.2.1 | CompliancetnL1ServiceCompliance | current | . | |
| 1.3.6.1.4.1.7483.2.3.1.2 | NodetnL1ServiceObjs | |||
| 1.3.6.1.4.1.7483.2.3.1.2.1 | NodetnControlNetworkLink | |||
| 1.3.6.1.4.1.7483.2.3.1.2.1.1 | TabletnControlNetworkLinkTable | not-accessible | current | The control network link table. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1 | RowtnControlNetworkLinkEntry | not-accessible | current | The Control Network connection entry. For the 1696R, the index is a logical derived value created by the system. For the 1830 PSS-32, the index is the physical… |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.1 | ColumntnCNLinkDescr | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.2 | ColumntnCNLinkAdminStatus | read-create | current | The Admin status of the link. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.3 | ColumntnCNLinkOperStatus | read-only | current | The Operational status of the link. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.5 | ColumntnCNLinkPhysicalIfIndex | read-create | current | The physical interface index of the link. SET on this attribute is currently not supported. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.7 | ColumntnCNLinkIpAddress | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.8 | ColumntnCNLinkSubnetMask | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.14 | ColumntnCNLinkHelloInterval | read-create | current | The hello interval of the link. Current configurable range: 1 to 65535. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.15 | ColumntnCNLinkRtrDeadInterval | read-create | current | The router dead interval of the link. For 1830, the range is (1..'FFFF'h). |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.22 | ColumntnCNLinkTeMetric | read-create | current | The Traffic eng metric of the link. For OSC, default is 10; for GCC OTU1, default is 40; for GCC OTU2 default is 30; for GCC OTU3 default is 20. Current config… |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.31 | ColumntnCNLinkOspfRoutingState | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.32 | ColumntnCNLinkConfigIfType | read-create | current | The OSPF interface type of the link. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.33 | ColumntnCNLinkConfigRtrPriority | read-create | current | The router priority of the link. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.34 | ColumntnCNLinkEquipOperStatus | read-only | current | The Operational status of the associated physical link. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.35 | ColumntnCNLinkDhcpEnabled | read-create | current | Indicates if DHCP is enabled on the link. Sets are restricted to the local ethernet port CN link. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.36 | ColumntnCNLinkSpeed | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.37 | ColumntnCNLinkDuplex | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.38 | ColumntnCNLinkProxyArp | read-create | current | Proxy Arp configured. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.39 | ColumntnCNLinkDHCPServer | read-create | current | DHCP server configured. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.40 | ColumntnCNLinkDHCPRange | read-create | current | DHCP range. Current configurable range: 0 to 10 |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.41 | ColumntnCNLinkAdjState | read-only | current | OSPF Adj state. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.42 | ColumntnCNLinkOscMode | read-create | current | OSC mode. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.43 | ColumntnCNLinkDHCPDfltGtwy | read-create | current | Indicates if default gateway IP address is distributed via DHCP on this interface. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.44 | ColumntnCNLinkCitAutoStateCtrl | read-create | current | false - System is not in auto_state. CIT enable/disable is done by ifAdminStatus. true - System is in auto_state. CIT enable/disable is done by the connectivit… |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.45 | ColumntnCNLinkAutoStateSourceIP | read-create | current | A source IP address that the system shall monitor when tnCNLinkCitAutoStateCtrl is true. This can be the 1350 OMS server address or another IP. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.46 | ColumntnCNLinkSourceLossCount | read-create | current | The number of consecutive retries that tnCNLinkAutoStateSourceIP is un-reachable when tnCNLinkCitAutoStateCtrl is true, which results in CIT port to be auto-en… |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.47 | ColumntnCNLinkSourceIPCheckInterval | read-create | current | The interval to contact tnCNLinkAutoStateSourceIP when tnCNLinkCitAutoStateCtrl is true. Current configurable range: 10 to 7200. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.48 | ColumntnCNLinkOspfAuthentType | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.49 | ColumntnCNLinkOspfAuthKey | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.50 | ColumntnCNLinkOspfAuthKeyId | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.51 | ColumntnCNLinkTdmxDcnConf | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.52 | ColumntnCNLinkInetAddressType | read-create | current | The value specifies the type of Internet address stored in tnCNLinkInetAddress |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.53 | ColumntnCNLinkInetAddress | read-create | current | Indicates the IPv6 address of the port |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.54 | ColumntnCNLinkPrefixLength | read-create | current | Prefix length of the IPV6 of the port |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.55 | ColumntnCNLinkAutoStateSourceInetAddressType | read-create | current | The value specifies the type of Internet address stored tnCNLinkAutoStateSourceInetAddress |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.56 | ColumntnCNLinkAutoStateSourceInetAddress | read-create | current | Indicates the IPv6 address |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.57 | ColumntnCNLinkDhcpv6Enabled | read-create | current | Indicates if DHCP version 6 is enabled on the link. Sets are restricted to the local ethernet port CN link. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.58 | ColumntnCNLinkDHCPv6Range | read-create | current | DHCP version 6 range. Current configurable range: 0 to 10 |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.59 | ColumntnCNLinkDHCPClient | read-create | current | Indicates if default gateway IP address is distributed via DHCP on this interface. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.60 | ColumntnCNLinkDHCPv6Client | read-create | current | Enable/Disable DHCPv6 client on the port. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.61 | ColumntnCNLinkDHCPClientDfltGtwy | read-create | current | Indicates if default gateway IP address is distributed via DHCP Client on this interface. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.62 | ColumntnCNLinkEtherPortIpV6SLAAC | read-create | current | Enable or disable a StateLess Address AutoConfig (SLAAC) client on the port. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.63 | ColumntnCNLinkOspfRetransint | read-create | current | Specifies the length of time, in seconds, that OSPF will wait before retransmitting an unacknowledged link state advertisement (LSA) to an OSPF neighbor. The v… |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.64 | ColumntnCNLinkOspfv3AdjStateId | read-only | current | OSPFv3 Adj state. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.65 | ColumntnCNLinkOspfNeighborRouterIp | read-only | current | OSPF Neighbor Router ID. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.66 | ColumntnCNLinkOspfv3NeighborRouterIp | read-only | current | OSPFv3 Neighbor Router ID. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.67 | ColumntnCNLinkOspfNeighborIp | read-only | current | OSPF Neighbor IP Address. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.68 | ColumntnCNLinkOspfv3NeighborInetAddress | read-only | current | Indicates the IPv6 address of OSPFv3 Neighbor. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.69 | ColumntnCNLinkRole | read-create | current | Set the role of the port to OAMP (for interconnection towards management system) or AUX (for general purpose interconnection towards other TPS systems). Defaul… |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.70 | ColumntnCNLinkDHCPServerIPv6SLAAC | read-only | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.71 | ColumntnCNLinkRouterAdvAutonomousFlag | read-create | current | When enabled, indicates that the IPv6 prefix can be used for autonomous stateless address autoconfiguration (SLAAC). |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.72 | ColumntnCNLinkRouterAdvDefaultLifeTime | read-create | current | The lifetime associated with the default router. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.73 | ColumntnCNLinkRouterAdvDefaultPreference | read-create | current | The preference associated with the default router. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.74 | ColumntnCNLinkRouterAdvMaxRtrAdvInterval | read-create | current | The maximum time allowed between sending unsolicited multicast Router Advertisements from the interface. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.75 | ColumntnCNLinkRouterAdvManagedFlag | read-create | current | When enabled, hosts use the administered (stateful) DHCPv6 protocol for address autoconfiguration in addition to any addresses autoconfigured using stateless a… |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.76 | ColumntnCNLinkRouterAdvOtherConfigFlag | read-create | current | When set, hosts use the administered (stateful) protocol for autoconfiguration of other (non-address) information. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.77 | ColumntnCNLinkRouterAdvPreferredLifeTime | read-create | current | The length of time in seconds (relative to the time the packet is sent) that addresses generated from the prefix via stateless address autoconfiguration remain… |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.78 | ColumntnCNLinkRouterAdvSendAdvertState | read-create | current | Configures the administrative state for the port. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.79 | ColumntnCNLinkRouterAdvValidLifeTime | read-create | current | The length of time in seconds (relative to the time the packet is sent) that the interface prefix is valid for the purpose of on-link determination. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.80 | ColumntnCNLinkAutoStateType | read-create | current | Mechanism used for monitoring the connection with an NMS: - neInitiated NE periodically sends ping messages to the NMS. - nmsInitiated An NMS periodically perf… |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.81 | ColumntnCNLinkAutoStateStatus | read-only | current | The connection status between NE and NMS. - connected(1): NE and NMS are connected - notConnected(2): NE and NMS are not connected - notApplicable(3): Fixed va… |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.82 | ColumntnCNLinkOspfv3HelloInterval | read-create | current | The hello interval of the link. Current configurable range: 1 to 65535. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.83 | ColumntnCNLinkOspfv3TeMetric | read-create | current | The Traffic eng metric of the link. Current configurable range: 1 to 65535. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.84 | ColumntnCNLinkOspfv3Retransint | read-create | current | Specifies the length of time, in seconds, that OSPFv3 will wait before retransmitting an unacknowledged link state advertisement (LSA) to an OSPFv3 neighbor. T… |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.85 | ColumntnCNLinkOspfv3RtrDeadInterval | read-create | current | The router dead interval of the link. For 1830, the range is (1..'FFFF'h). |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.86 | ColumntnCNLinkOspfv3ConfigRtrPriority | read-create | current | The router priority of the link. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.87 | ColumntnCNLinkOspfv3RoutingState | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.88 | ColumntnCNLinkOspfOscRoutingState | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.89 | ColumntnCNLinkOspfv6OscRoutingState | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.1.2 | TabletnCNLinkViaChannelTable | not-accessible | current | This is a read-only table. It provides a secondary way of reading CN Link information. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.2.1 | RowtnCNLinkViaChannelEntry | not-accessible | current | The index has a shelf/slot/port/channel granularity. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.2.1.1 | ColumntnPortIndex | not-accessible | current | The port portion of the index of the link. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.2.1.2 | ColumntnChannelIndex | not-accessible | current | The channel portion of the index of the link. |
| 1.3.6.1.4.1.7483.2.3.1.2.1.2.1.3 | ColumntnCNLinkViaChannelIfIndex | read-only | current | The interface index of the link, a derived value created by the system. |
| 1.3.6.1.4.1.7483.2.3.1.2.2 | NodetnDataNetworkLink | |||
| 1.3.6.1.4.1.7483.2.3.1.2.2.3 | TabletnL1TrafficParamTable | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.2.3.1 | RowtnL1TrafficParamEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.2.3.1.1 | ColumntnL1TrafficParamPerHopBehaviour | not-accessible | current | The value of this object identifies the Class of Service. |
| 1.3.6.1.4.1.7483.2.3.1.2.2.3.1.2 | ColumntnL1TrafficParamBookingFactor | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.2.3.1.3 | ColumntnL1TrafficParamMaximumLoad | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.2.3.1.4 | ColumntnL1TrafficParamPMF | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.2.3.1.5 | ColumntnL1TrafficParamAvailableBandwidth | read-only | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.4 | NodetnIpRoute | |||
| 1.3.6.1.4.1.7483.2.3.1.2.4.1 | TabletnIpStaticRouteTable | not-accessible | deprecated | . |
| 1.3.6.1.4.1.7483.2.3.1.2.4.1.1 | RowtnIpStaticRouteEntry | not-accessible | deprecated | . |
| 1.3.6.1.4.1.7483.2.3.1.2.4.1.1.1 | ColumntnIpStaticRouteDest | not-accessible | deprecated | . |
| 1.3.6.1.4.1.7483.2.3.1.2.4.1.1.2 | ColumntnIpStaticRouteMask | not-accessible | deprecated | . |
| 1.3.6.1.4.1.7483.2.3.1.2.4.1.1.3 | ColumntnIpStaticRouteTos | not-accessible | deprecated | . |
| 1.3.6.1.4.1.7483.2.3.1.2.4.1.1.4 | ColumntnIpStaticRouteNextHop | not-accessible | deprecated | . |
| 1.3.6.1.4.1.7483.2.3.1.2.4.1.1.6 | ColumntnIpStaticRouteMetric | read-create | deprecated | Determines which route to be entered in the NE routing table when there are multiple identical routes discovered through different routing protocols. Lower val… |
| 1.3.6.1.4.1.7483.2.3.1.2.4.1.1.7 | ColumntnIpStaticRouteWithRedistribution | read-create | deprecated | . |
| 1.3.6.1.4.1.7483.2.3.1.2.4.1.1.8 | ColumntnIpStaticRouteRowStatus | read-create | deprecated | . |
| 1.3.6.1.4.1.7483.2.3.1.2.4.2 | TabletnIpCidrRouteTable | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.4.2.1 | RowtnIpCidrRouteEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.4.2.1.1 | ColumntnIpCidrRouteWithRedistribution | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.4.3 | NodetnIpRouteGlobal | |||
| 1.3.6.1.4.1.7483.2.3.1.2.4.3.1 | ScalartnIpStaticRouteRedistributeMetricType | read-write | current | Redistribute metric type for static routes. Current configurable range: 1 to 2. |
| 1.3.6.1.4.1.7483.2.3.1.2.4.3.2 | ScalartnIpStaticRouteRedistributeMetric | read-write | current | Redistribute metric for static routes. Current configurable range: 0 to 16777214. |
| 1.3.6.1.4.1.7483.2.3.1.2.4.3.3 | ScalartnIpDefaultRouteRedistributeMetricType | read-write | current | Redistribute metric type for the default route. Current configurable range: 1 to 2. |
| 1.3.6.1.4.1.7483.2.3.1.2.4.3.4 | ScalartnIpDefaultRouteRedistributeMetric | read-write | current | Redistribute metric for the default route. Current configurable range: 0 to 16777214. |
| 1.3.6.1.4.1.7483.2.3.1.2.4.3.5 | ScalartnIpOspfAreaNumberPPPId | read-write | current | For all OSC/GCC interfaces, it will use the same OSPF area which can be provisioned to something other than the default 0.0.0.0. Current configurable range: 0 … |
| 1.3.6.1.4.1.7483.2.3.1.2.4.3.6 | ScalartnIpOspfRouterId | read-write | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.4.3.7 | ScalartnIpDefaultRouteRedistributeBgpToOspfMetricType | read-write | current | Redistribute metric type for default Bgp to Ospf. Current configurable range: 1 to 2. |
| 1.3.6.1.4.1.7483.2.3.1.2.4.3.8 | ScalartnIpDefaultRouteRedistributeBgpToOspfMetric | read-write | current | Redistribute metric for the default route Bgp to Ospf. Current configurable range: 0 to 16777214. |
| 1.3.6.1.4.1.7483.2.3.1.2.4.3.9 | ScalartnIpDefaultRouteRedistributeBgpToOspfMode | read-write | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.4.3.10 | ScalartnIpDefaultRouteRedistributeKernelToOspfMetricType | read-write | current | Redistribute metric type for default Kernel to Ospf. Current configurable range: 1 to 2. |
| 1.3.6.1.4.1.7483.2.3.1.2.4.3.11 | ScalartnIpDefaultRouteRedistributeKernelToOspfMetric | read-write | current | Current configurable range: 0 to 16777214. |
| 1.3.6.1.4.1.7483.2.3.1.2.4.3.12 | ScalartnIpDefaultRouteRedistributeKernelToOspfStatus | read-write | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.4.3.13 | ScalartnIpStaticRouteRedistributeBgpMetric | read-write | current | Current configurable range: 0 to 16777214. |
| 1.3.6.1.4.1.7483.2.3.1.2.4.3.14 | ScalartnIpOspfV3AreaNumberPPPId | read-write | current | For all OSC/GCC interfaces, it will use the same OSPF V3 area which can be provisioned to something other than the default 0.0.0.0. Current configurable range:… |
| 1.3.6.1.4.1.7483.2.3.1.2.5 | NodetnSharedRiskGroupObjs | |||
| 1.3.6.1.4.1.7483.2.3.1.2.5.1 | NodetnL1NetworkLink | |||
| 1.3.6.1.4.1.7483.2.3.1.2.5.2 | NodetnL1Hop | |||
| 1.3.6.1.4.1.7483.2.3.1.2.5.3 | NodetnL1Fiber | |||
| 1.3.6.1.4.1.7483.2.3.1.2.5.4 | NodetnL1Conduit | |||
| 1.3.6.1.4.1.7483.2.3.1.2.6 | NodetnL1Protection | |||
| 1.3.6.1.4.1.7483.2.3.1.2.6.1 | TabletnApsGroupTable | not-accessible | current | The automatic protection switch group table. |
| 1.3.6.1.4.1.7483.2.3.1.2.6.1.1 | RowtnApsGroupEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.1 | ColumntnApsGroupId | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.2 | ColumntnApsGroupRowStatus | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.3 | ColumntnApsGroupDescr | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.4 | ColumntnApsGroupMode | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.5 | ColumntnApsGroupRevert | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.6 | ColumntnApsGroupDirection | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.7 | ColumntnApsGroupExtraTraffic | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.8 | ColumntnApsGroupWaitToRestore | read-create | current | Current configurable range: 1 to 20. |
| 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.9 | ColumntnApsGroupK1K2Rcv | read-only | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.10 | ColumntnApsGroupK1K2Trans | read-only | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.11 | ColumntnApsGroupCurrentStatus | read-only | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.12 | ColumntnApsGroupModeMismatches | read-only | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.13 | ColumntnApsGroupChannelMismatches | read-only | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.14 | ColumntnApsGroupPSBFs | read-only | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.15 | ColumntnApsGroupFEPLFs | read-only | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.16 | ColumntnApsGroupSwitchedIfIndex | read-only | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.17 | ColumntnApsGroupMembers | read-create | current | This attribute must be set with the following format: For the 1696R and 1830 PSS-32 single line ported cards: <protChIfIndex>:<workChIfIndex> For the 1830 PSS-… |
| 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.18 | ColumntnApsGroupSdEnable | read-create | current | Indicates whether or not Signal Degrade is used for protection switching. |
| 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.19 | ColumntnApsHoldOffTimer | read-create | current | Hold Off Time for automatic switching. Current configurable range: 0 to 10000. |
| 1.3.6.1.4.1.7483.2.3.1.2.6.2 | TabletnApsMemberTable | not-accessible | current | The automatic protection switch group member table. |
| 1.3.6.1.4.1.7483.2.3.1.2.6.2.1 | RowtnApsMemberEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.6.2.1.1 | ColumntnApsMemberIfIndex | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.6.2.1.2 | ColumntnApsMemberRowStatus | read-create | current | Changing the row status is currently not supported. |
| 1.3.6.1.4.1.7483.2.3.1.2.6.2.1.3 | ColumntnApsMemberConfigNumber | read-create | current | Currently, only the first two values are used: 0 - Protection 1 - Working The rest of values (2..14) are not used. |
| 1.3.6.1.4.1.7483.2.3.1.2.6.2.1.5 | ColumntnApsMemberSwitch | read-create | current | The type of protection switch. |
| 1.3.6.1.4.1.7483.2.3.1.2.6.2.1.7 | ColumntnApsMemberCurrentStatus | read-only | current | Current protection status. |
| 1.3.6.1.4.1.7483.2.3.1.2.6.3 | TabletnPackApsGroupTable | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.6.3.1 | RowtnPackApsGroupEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.1 | ColumntnPackApsGroupID | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.2 | ColumntnPackApsGroupRowStatus | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.3 | ColumntnPackApsGroupWorkIfIndex | read-create | current | The interface Index in the working pack. |
| 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.4 | ColumntnPackApsGroupProtIfIndex | read-create | current | The interface Index in the protection pack. |
| 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.5 | ColumntnPackApsGroupDescr | read-create | current | Description for the APS group. |
| 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.6 | ColumntnPackApsGroupRevert | read-create | current | The revertive attribute of the APS group. |
| 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.7 | ColumntnPackApsGroupDirection | read-create | current | The protection direction of the APS Group.Only Unidirection |
| 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.8 | ColumntnPackApsGroupWaitToRestore | read-create | current | The wait-to-restore time for the revertive mode automatic switching. The values are in minutes. Current configurable range: 1 to 15. |
| 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.9 | ColumntnPackApsGroupHoldOffTimer | read-create | current | Hold Off Time for automatic switching. Current configurable range: 0 to 10000. |
| 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.10 | ColumntnPackApsGroupSwitchCmd | read-create | current | The switch command applied to the APS group. |
| 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.11 | ColumntnPackApsGroupActSide | read-only | current | Active side in the Pack APS group. |
| 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.12 | ColumntnPackApsGroupCurrentStatus | read-only | current | Currently active switch request for a Pack APS. |
| 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.13 | ColumntnPackApsGroupWorkStatus | read-only | current | The status of the working pack in the APS group. |
| 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.14 | ColumntnPackApsGroupProtStatus | read-only | current | The status of the protection pack in the APS group. |
| 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.15 | ColumntnPackApsGroupPortFailEnable | read-create | current | Indicates whether or not Port fail is used for protection switching. |
| 1.3.6.1.4.1.7483.2.3.1.2.7 | NodetnIpTunnel | |||
| 1.3.6.1.4.1.7483.2.3.1.2.8 | NodetnControlNetworkMap | |||
| 1.3.6.1.4.1.7483.2.3.1.2.8.1 | TabletnControlNetworkMapTable | not-accessible | current | The control network map table. |
| 1.3.6.1.4.1.7483.2.3.1.2.8.1.1 | RowtnControlNetworkMapEntry | not-accessible | current | The Control Network map entry. This is the information on the neighbors of this NE. |
| 1.3.6.1.4.1.7483.2.3.1.2.8.1.1.1 | ColumntnCNMapTableIndex | not-accessible | current | The index into the map table. |
| 1.3.6.1.4.1.7483.2.3.1.2.8.1.1.2 | ColumntnCNMapIpAddress | read-only | current | The IP address of the node. |
| 1.3.6.1.4.1.7483.2.3.1.2.8.1.1.3 | ColumntnCNMapNeName | read-only | current | The name of the node. |
| 1.3.6.1.4.1.7483.2.3.1.2.8.1.1.4 | ColumntnCNMapSoftwareRelease | read-only | current | The software release of the node. |
| 1.3.6.1.4.1.7483.2.3.1.2.8.1.1.5 | ColumntnCNMapIpv6InetAddress | read-only | current | Indicates the IPv6 address. |
| 1.3.6.1.4.1.7483.2.3.1.2.8.1.1.6 | ColumntnCNMapIpv4Address | read-only | current | IP Address. |
| 1.3.6.1.4.1.7483.2.3.1.2.9 | NodetnNetworkInterface | |||
| 1.3.6.1.4.1.7483.2.3.1.2.9.1 | TabletnNetIfTable | not-accessible | current | The network interface table. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1 | RowtnNetIfEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.1 | ColumntnNetIfIndex | not-accessible | current | Access identifier for the Network Interface Index. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.2 | ColumntnNetIfTypeOfOperation | read-create | current | Create, delete, or modify a network interface instance over an ECC. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.3 | ColumntnNetIfStatus | read-create | current | Administrative status of the network interface. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.4 | ColumntnNetIfPacketType | read-create | current | GCC packet type, which indicates if the NETIF packet type is standard (std) or non-standard (nonstd). Only provisionable for 4DPA4, 11DPE12, 11STAR1, and 11STM… |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.5 | ColumntnNetIfMtu | read-create | current | Maximum Transmission Unit size, in units of bytes. This attribute can only be changed if tnNetIfPacketType is std. Current configurable range: 576 to 1500. Def… |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.6 | ColumntnNetIfHelloInterval | read-create | current | Specifies the hello interval for the interface. The Hello interval specifies how often (in seconds) a hello packet is sent out on the interface. Hello packets … |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.7 | ColumntnNetIfRtrDeadInterval | read-create | current | OSPF Router Dead Interval of the interface. This is the time elapsed between not hearing a router's Hello PDU before the interface OSPF state is declared down.… |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.8 | ColumntnNetIfMetric | read-create | current | OSPF Metric or Cost of the interface. The lower the cost, the more preferred the interface is for the routing of packets. Current configurable range: 1 to 6553… |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.9 | ColumntnNetIfOspfAuthentType | read-create | current | Specifies OSPF authentication on the interface - only none and MD5 are currently supported. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.10 | ColumntnNetIfOspfAuthKey | read-create | current | Key used for OSPF MD5 128 bit hash value key calculation on the interface. The string shall be 0 to 16 uppercase or lowercase alphanumeric characters. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.11 | ColumntnNetIfOspfAuthKeyId | read-create | current | Key used for OSPF MD5 128 bit hash value key calculation on the interface. Current configurable range: 1 to 255. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.12 | ColumntnNetIfCnLinkAdjState | read-only | current | NETIF OSPF adjacency state. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.13 | ColumntnNetIfMtuNeg | read-only | current | The actual (negotiated) Maximum Transmission Unit size,in units of bytes with default value -1, when the MTU size has not yet been negotiated. The default valu… |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.14 | ColumntnNetIfOSPFAreaNumberId | read-create | current | NETIF OSPF area id. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.15 | ColumntnNetIfOspfRetransint | read-create | current | Specifies the length of time, in seconds, that OSPF will wait before retransmitting an unacknowledged link state advertisement (LSA) to an OSPF neighbor. The v… |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.16 | ColumntnNetIfOspfv3AdjStateId | read-only | current | OSPFv3 Adj state. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.17 | ColumntnNetIfOspfNeighborRouterIp | read-only | current | OSPF Neighbor Router ID. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.18 | ColumntnNetIfOspfv3NeighborRouterIp | read-only | current | OSPFv3 Neighbor Router ID. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.19 | ColumntnNetIfOspfNeighborIp | read-only | current | OSPF Neighbor IP Address. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.20 | ColumntnNetIfOspfv3NeighborInetAddress | read-only | current | Indicates the IPv6 address of OSPFv3 Neighbor. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.21 | ColumntnNetIfIPv6LinkLocalInetAddress | read-only | current | Indicates the IPv6 address of Link Local. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.22 | ColumntnNetIfLcpEchoInterval | read-create | current | NetIf LCP Echo Interval. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.23 | ColumntnNetIfLcpEchoFailure | read-create | current | NetIf LCP Echo Failure. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.24 | ColumntnNetIfOspfStatus | read-create | current | NetIf ospf status. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.25 | ColumntnNetIfOspfv3AreaNumberId | read-create | current | NETIF OSPFv3 area id. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.26 | ColumntnNetIfOspfv3HelloInterval | read-create | current | Specifies the hello interval for the interface. The Hello interval specifies how often (in seconds) a hello packet is sent out on the interface. Hello packets … |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.27 | ColumntnNetIfOspfv3Metric | read-create | current | OSPFv3 Metric or Cost of the interface. The lower the cost, the more preferred the interface is for the routing of packets. Current configurable range: 1 to 65… |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.28 | ColumntnNetIfOspfv3Retransint | read-create | current | Specifies the length of time, in seconds, that OSPFv3 will wait before retransmitting an unacknowledged link state advertisement (LSA) to an OSPFv3 neighbor. T… |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.29 | ColumntnNetIfOspfv3RtrDeadInterval | read-create | current | OSPFv3 Router Dead Interval of the interface. This is the time elapsed between not hearing a router's Hello PDU before the interface OSPFv3 state is declared d… |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.30 | ColumntnNetIfOspfv3ConfigRtrPriority | read-create | current | The router priority of the link. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.31 | ColumntnNetIfOspfv3Status | read-create | current | NetIf ospfv3 status. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.2 | TabletnNetIfFacilityTable | not-accessible | current | The Network interface facility table. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.2.1 | RowtnNetIfFacilityEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.9.2.1.1 | ColumntnNetIfFacilityIfIndex | not-accessible | current | The facility carrying the ECC. The format of the first 32 bits of the 64 index is as follows: 8 8 1 13 2 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-… |
| 1.3.6.1.4.1.7483.2.3.1.2.9.2.1.2 | ColumntnNetIfFacilityIfIndexLo | not-accessible | current | The facility carrying the ECC. tnNetIfFacilityIfIndex (above) is the first 32 bits of the 64 bit index. The format of the second 32 bit of the index is as foll… |
| 1.3.6.1.4.1.7483.2.3.1.2.9.2.1.3 | ColumntnNetIfFacilityTypeOfOperation | read-create | current | Create, delete, or modify the facility information of a network interface instance. |
| 1.3.6.1.4.1.7483.2.3.1.2.9.2.1.4 | ColumntnNetIfFacilityEccChanType | read-create | current | Specifies the ECC type of the referred ECC channel. Default: gcc0 if NETIF addresses an OTU gcc1 if NETIF addresses an ODU. Refer to the 1830 PSS R6.0 XCOM RRS… |
| 1.3.6.1.4.1.7483.2.3.1.2.10 | NodetnStaticRoute | |||
| 1.3.6.1.4.1.7483.2.3.1.2.10.1 | TabletnStaticRouteTable | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.10.1.1 | RowtnStaticRouteEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.10.1.1.1 | ColumntnStaticRouteDestInetAddressType | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.10.1.1.2 | ColumntnStaticRouteDestInetAddress | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.10.1.1.3 | ColumntnStaticRouteMaskPrefix | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.10.1.1.4 | ColumntnStaticRouteTos | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.10.1.1.5 | ColumntnStaticRouteNextHopType | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.10.1.1.6 | ColumntnStaticRouteNextHop | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.10.1.1.7 | ColumntnStaticRouteMetric | read-create | current | Determines which route to be entered in the NE routing table when there are multiple identical routes discovered through different routing protocols. Lower val… |
| 1.3.6.1.4.1.7483.2.3.1.2.10.1.1.8 | ColumntnStaticRouteWithRedistribution | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.10.1.1.9 | ColumntnStaticRouteRowStatus | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.10.1.1.10 | ColumntnStaticRouteIdentifier | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.10.1.1.11 | ColumntnStaticRouteWithBgpDistribution | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.11 | NodetnEthernetInterface | |||
| 1.3.6.1.4.1.7483.2.3.1.2.11.1 | TabletnEthIfTable | not-accessible | current | The Ethernet table. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1 | RowtnEthIfEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.1 | ColumntnEthIfIndex | not-accessible | current | Access identifier for the Ethernet Index. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.2 | ColumntnEthIfTypeOfOperation | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.3 | ColumntnEthIfStatus | read-create | current | Administrative status of the Ethernet. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.4 | ColumntnEthIfHelloInterval | read-create | current | Specifies the hello interval for the interface. The Hello interval specifies how often (in seconds) a hello packet is sent out on the interface. Hello packets … |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.5 | ColumntnEthIfRtrDeadInterval | read-create | current | OSPF Router Dead Interval of the interface. This is the time elapsed between not hearing a router's Hello PDU before the interface OSPF state is declared down.… |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.6 | ColumntnEthIfMetric | read-create | current | OSPF metric or cost of the interface. The lower the cost, the more preferred the interface is for the routing of packets. Current configurable range: 1 to 6553… |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.7 | ColumntnEthIfOspfAuthentType | read-create | current | Specifies OSPF authentication on the interface - only none and MD5 are currently supported. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.8 | ColumntnEthIfOspfAuthKey | read-create | current | Key used for OSPF MD5 128 bit hash value key calculation on the interface. The string shall be 0 to 16 uppercase or lowercase alphanumeric characters. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.9 | ColumntnEthIfOspfAuthKeyId | read-create | current | Key used for OSPF MD5 128 bit hash value key calculation on the interface. Current configurable range: 1 to 255. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.10 | ColumntnEthIfOSPFAreaNumberId | read-create | current | ETHIF OSPF area id. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.11 | ColumntnEthIfProxyArp | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.12 | ColumntnEthIfOspfRouteState | read-create | current | Specifies the OSPF routing state of the ETHIF interface. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.13 | ColumntnEthIfDhcpEnabled | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.14 | ColumntnEthIfDHCPRange | read-create | current | DHCP range. Current configurable range: 0 to 10. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.15 | ColumntnEthIfDHCPDfltGtwy | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.16 | ColumntnEthIfDhcpv6Enabled | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.17 | ColumntnEthIfDHCPv6Range | read-create | current | DHCP version 6 range. Current configurable range: 0 to 10. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.18 | ColumntnEthIfDHCPClient | read-create | current | Indicates if default gateway IP address is distributed via DHCP on this interface. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.19 | ColumntnEthIfDHCPClientDfltGtwy | read-create | current | Indicates if default gateway IP address is distributed via DHCP Client on this interface. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.20 | ColumntnEthIfIpV6SLAAC | read-create | current | Enable or disable a StateLess Address AutoConfig (SLAAC). |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.21 | ColumntnEthIfIpAddress | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.22 | ColumntnEthIfSubnetMask | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.23 | ColumntnEthIfInetAddressType | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.24 | ColumntnEthIfInetAddress | read-create | current | Indicates the IPv6 address. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.25 | ColumntnEthIfPrefixLength | read-create | current | Prefix length of the IPV6 |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.26 | ColumntnEthIfDescription | read-create | current | Ethif Description. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.27 | ColumntnEthIfOspfAdjStateId | read-only | current | Specifies OSPF adj state |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.28 | ColumntnEthIfOspfDrPriorityId | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.29 | ColumntnEthIfOspfRetransint | read-create | current | Specifies the length of time, in seconds, that OSPF will wait before retransmitting an unacknowledged link state advertisement (LSA) to an OSPF neighbor. The v… |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.30 | ColumntnEthIfOspfv3AdjStateId | read-only | current | OSPFv3 Adj state. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.31 | ColumntnEthIfOperStatus | read-only | current | The Operational status of the IBM link. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.32 | ColumntnEthIfAlmProfName | read-create | current | Alarm profile for IBM link. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.33 | ColumntnEthIfDHCPServerIPv6SLAAC | read-only | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.34 | ColumntnEthIfRouterAdvAutonomousFlag | read-create | current | When enabled, indicates that the interface prefix can be used for autonomous stateless address configuration. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.35 | ColumntnEthIfRouterAdvDefaultLifeTime | read-create | current | The lifetime associated with the default router. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.36 | ColumntnEthIfRouterAdvDefaultPreference | read-create | current | The preference associated with the default router. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.37 | ColumntnEthIfRouterAdvMaxRtrAdvInterval | read-create | current | The maximum time allowed between sending unsolicited multicast Router Advertisements from the interface. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.38 | ColumntnEthIfRouterAdvManagedFlag | read-create | current | When enabled, hosts use the administered (stateful) protocol for address autoconfiguration in addition to any addresses autoconfigured using stateless address … |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.39 | ColumntnEthIfRouterAdvOtherConfigFlag | read-create | current | When set, hosts use the administered (stateful) protocol for autoconfiguration of other (non-address) information. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.40 | ColumntnEthIfRouterAdvPreferredLifeTime | read-create | current | The length of time in seconds (relative to the time the packet is sent) that addresses generated from the prefix via stateless address autoconfiguration remain… |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.41 | ColumntnEthIfRouterAdvSendAdvertState | read-create | current | Set administrative status of the ETHIF interface. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.42 | ColumntnEthIfRouterAdvValidLifeTime | read-create | current | The length of time in seconds (relative to the time the packet is sent) that the interface prefix is valid for the purpose of on-link determination. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.43 | ColumntnEthIfOspfv3AreaNumberId | read-create | current | ETHIF OSPFv3 area id. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.44 | ColumntnEthIfOspfv3HelloInterval | read-create | current | Specifies the hello interval for the interface. The Hello interval specifies how often (in seconds) a hello packet is sent out on the interface. Hello packets … |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.45 | ColumntnEthIfOspfv3Metric | read-create | current | OSPFv3 metric or cost of the interface. The lower the cost, the more preferred the interface is for the routing of packets. Current configurable range: 1 to 65… |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.46 | ColumntnEthIfOspfv3Retransint | read-create | current | Specifies the length of time, in seconds, that OSPFv3 will wait before retransmitting an unacknowledged link state advertisement (LSA) to an OSPFv3 neighbor. T… |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.47 | ColumntnEthIfOspfv3RtrDeadInterval | read-create | current | OSPFv3 Router Dead Interval of the interface. This is the time elapsed between not hearing a router's Hello PDU before the interface OSPFv3 state is declared d… |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.48 | ColumntnEthIfOspfv3DrPriorityId | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.11.1.1.49 | ColumntnEthIfOspfv3RouteState | read-create | current | Specifies the OSPFv3 routing state of the ETHIF interface. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.2 | TabletnEthIfInterfaceTable | not-accessible | current | The Ethernet Interface table. |
| 1.3.6.1.4.1.7483.2.3.1.2.11.2.1 | RowtnEthIfInterfaceEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.11.2.1.1 | ColumntnEthIfInterfaceIfIndex | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.11.2.1.2 | ColumntnEthIfInterfaceVlanId | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.11.2.1.3 | ColumntnEthIfInterfaceTypeOfOperation | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.12 | NodetnDhcpRelay | |||
| 1.3.6.1.4.1.7483.2.3.1.2.12.1 | TabletnDhcpRelayRecordTable | not-accessible | current | The Dhcp Relay Table. |
| 1.3.6.1.4.1.7483.2.3.1.2.12.1.1 | RowtnDhcpRelayRecordEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.12.1.1.1 | ColumntnDhcpRelayRecordIndex1 | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.12.1.1.2 | ColumntnDhcpRelayRecordIndex2 | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.12.1.1.3 | ColumntnDhcpRelayRecordInetAddressType | not-accessible | current | The value specifies the type of Internet address stored in tnDhcpRelayRecordInetAddress. |
| 1.3.6.1.4.1.7483.2.3.1.2.12.1.1.4 | ColumntnDhcpRelayRecordInetAddress | not-accessible | current | Indicates the IPv6 address of the port. |
| 1.3.6.1.4.1.7483.2.3.1.2.12.1.1.5 | ColumntnDhcpRelayRecordRowStatus | read-create | current | Currently all entries have a row status of active. Sets are permitted for the following values: - active(1) - createAndGo(4) - destroy(6). |
| 1.3.6.1.4.1.7483.2.3.1.2.12.1.1.6 | ColumntnDhcpRelayRecordRailIdDescr | read-create | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.13 | NodetnDhcpServer | |||
| 1.3.6.1.4.1.7483.2.3.1.2.13.1 | TabletnDhcpServerTable | not-accessible | current | The Dhcp Server Table. |
| 1.3.6.1.4.1.7483.2.3.1.2.13.1.1 | RowtnDhcpServerEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.3.1.2.13.1.1.1 | ColumntnDhcpServerInetAddressType | not-accessible | current | The address type of tnDhcpServerInetAddress. |
| 1.3.6.1.4.1.7483.2.3.1.2.13.1.1.2 | ColumntnDhcpServerInetAddress | not-accessible | current | The IP address to which this entry's addressing information pertains. The address type of this object is specified in ipAddressAddrType. Implementors need to b… |
| 1.3.6.1.4.1.7483.2.3.1.2.13.1.1.3 | ColumntnDhcpServerSerialno | read-create | current | Serial number of system which wants to get IP address via DHCP |
| 1.3.6.1.4.1.7483.2.3.1.2.13.1.1.4 | ColumntnDhcpServerMacAddress | read-create | current | {xx:xx:xx:xx:xx:xx | xx-xx-xx-xx-xx-xx} - 6-byte unicast MAC address of the remote ethman port,where xx are hexadecimal numbers. |
| 1.3.6.1.4.1.7483.2.3.1.2.13.1.1.5 | ColumntnDhcpServerPort | read-only | current | Serial number of system which wants to get IP address via DHCP. |
| 1.3.6.1.4.1.7483.2.3.1.2.13.1.1.6 | ColumntnDhcpServerRowStatus | read-create | current | Currently all entries have a row status of active. Sets are permitted for the following values: - active(1) - createAndGo(4) - destroy(6). |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AluPortYcableMode | INTEGER { legacy(1), standard(2) } | current | The desired Ycalbe mode of this port. |
| ApsK1K2 | OCTET STRING (SIZE (2)) | current | This Textual Convention describes an object that stores a SONET K1 and K2 byte APS protocol field. K1 is located in the first octet, K2 is located in the second octet. Bits are numbered from left to right. Bits 1-4 of t… |
| NokiaCNLinkOspfRoutingState | INTEGER { disable(1), enable(2), redistribute(3) } | current | Control Network Link OSPF Routing State. |
| TropicLinkAdminStateType | INTEGER { enabled(1), disabled(2), testing(3), locked(4) } | current | . |
| TropicLinkOperationalStateType | INTEGER { up(1), down(2), testing(3), unknown(4) } | current | . |
| TropicOspfAdjacencyStateType | INTEGER { down(1), init(2), twoWay(3), exchangeStart(4), exchange(5), loading(6), full(7) } | current | This Textual convention describes applicable OSPF adjacency states. |
| TropicProtectionLevel | INTEGER { unprotected(1), oneForOne(2), onePlusOne(3), onePlusOneOpticalSplitter(4), onePlusOneESNCP(5), onePlusOneOpticalSplitterG8731(6) } | current | . |