MIB Viewer

TROPIC-OPTICALCARD-MIB

288 objects
The card-specific attributes for Nokia WDM network elements.
Imported Objects
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIInteger32 MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCRowStatus TEXTUAL-CONVENTION TruthValue
TROPIC-GLOBAL-REGtnCardModules tnOpticalCardMIB
TROPIC-SHELF-MIBtnShelfIndex
TROPIC-SLOT-MIBtnSlotIndex
TROPIC-TCAluWdmFcruProtectionRoleType TnCommand TropicLEDColorType TropicLEDStateType
OIDNameAccessStatusDescription
1.3.6.1.4.1.7483.1.1.2.2.3.5IdentitytnOpticalCardMibModuleThe card-specific attributes for Nokia WDM network elements.
1.3.6.1.4.1.7483.2.2.3.5.1NodetnOpticalCardConf
1.3.6.1.4.1.7483.2.2.3.5.1.1NodetnOpticalCardGroups
1.3.6.1.4.1.7483.2.2.3.5.1.1.1GrouptnOpticalCardScalarsGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.4GrouptnDcmCardGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.8GrouptnPowerControlCardGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.9GrouptnWssCardGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.10GrouptnSfdCardGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.11GrouptnSonetSdhPpSectionCardGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.12GrouptnPcsSectionCardGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.14Grouptn11dpge12CardGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.15GrouptnSfcCardGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.18Grouptn11dpe12eCardGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.19Grouptn1dpp24mCardGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.21GrouptnOpsCardGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.22Grouptn11dpe12aCardGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.23GrouptnCardFunctionModeGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.24Grouptn112pdm11CardGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.25GrouptnPtpctlCardScalarsGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.26GrouptnPtpctlCardGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.27GrouptnWtocmaCardScalarsGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.28GrouptnWtocmaCardGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.29GrouptnCruCardScalarsGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.30GrouptnCruCardGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.31GrouptnIroadmCardConfigScalarsGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.32GrouptnIroadmCardConfigGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.33GrouptnIroadmCardInfoScalarsGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.34GrouptnIroadmCardInfoGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.35GrouptnIsonCardModeScalarsGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.36GrouptnIsonCardModeGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.38GrouptnCardEtherTypeProfileScalarsGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.39GrouptnCardEtherTypeProfileGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.40GrouptnAutomationConfigScalarsGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.41GrouptnAutomationConfigGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.44GrouptnSfd5CardScalarsGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.45GrouptnSfd5CardGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.46GrouptnSfd10CardScalarsGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.47GrouptnSfd10CardGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.48GrouptnDcmxCardScalarsGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.1.49GrouptnDcmxCardGroupcurrent.
1.3.6.1.4.1.7483.2.2.3.5.1.2NodetnOpticalCardCompliances
1.3.6.1.4.1.7483.2.2.3.5.1.2.1CompliancetnOpticalCardCompliancecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2NodetnOpticalCardObjs
1.3.6.1.4.1.7483.2.2.3.5.2.1ScalartnOpticalCardTotalread-onlycurrentThe total number of optical card records allocated on a 1696ROADM/1830 NE.
1.3.6.1.4.1.7483.2.2.3.5.2.4TabletnDcmCardTablenot-accessiblecurrentA table of DCM card specific attributes.
1.3.6.1.4.1.7483.2.2.3.5.2.4.1RowtnDcmCardEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.4.1.1ColumntnDcmCardProgrammedCompensationDistanceread-createcurrentThe programmed compensation distance associated with this DCM card. Current configurable range 1696R: 15 to 100. Possible programmed values are 15, 40, 60, 80 …
1.3.6.1.4.1.7483.2.2.3.5.2.4.1.2ColumntnDcmCardPresentCompensationDistanceread-onlycurrentThe present compensation distance associated with this DCM card. Not applicable to the 1830 PSS-32.
1.3.6.1.4.1.7483.2.2.3.5.2.4.1.3ColumntnDcmCardSizeread-onlycurrentThe length of TRANSMISSION fiber that the DCM is designed to compensate (unit:km).
1.3.6.1.4.1.7483.2.2.3.5.2.4.1.4ColumntnDcmCardFiberTyperead-onlycurrentThe type of fiber that the DCM is designed to dispersion-compensate.
1.3.6.1.4.1.7483.2.2.3.5.2.4.1.5ColumntnDcmCardAverageInsertionLossread-onlycurrentThe measured insertion loss averaged over wavelength with no external attenuation added to the DCM (unit:dB).
1.3.6.1.4.1.7483.2.2.3.5.2.4.1.6ColumntnDcmCardInsertionLossSloperead-onlycurrentA linear least-squares fitted slope of the measured attenuation (positive or negative) over the wavelength range with no external attenuation added to the DCM …
1.3.6.1.4.1.7483.2.2.3.5.2.4.1.7ColumntnDcmCardAverageInsertionLossPadread-onlycurrentThe measured insertion loss averaged over wavelength with external attenuation added to the DCM (unit: dB).
1.3.6.1.4.1.7483.2.2.3.5.2.4.1.8ColumntnDcmCardInsertionLossSlopePadread-onlycurrentA linear least-squares fitted slope of the measured attenuation (positive or negative) over the wavelength range with external attenuation added to the DCM (un…
1.3.6.1.4.1.7483.2.2.3.5.2.4.1.9ColumntnDcmCardTotalDispTiltread-onlycurrentCoefficients A, B, C and D of a 3rd order polynomial fit of Chromatic dispersion vs. wavelength from 1528 to 1565nm in 0.4-2.0nm steps such that TotalDispersio…
1.3.6.1.4.1.7483.2.2.3.5.2.4.1.10ColumntnDcmCardDispFiberLengthread-onlycurrentThe total length of dispersion fiber inside the DCM module, to the closest km.
1.3.6.1.4.1.7483.2.2.3.5.2.4.1.11ColumntnDcmCardPMDread-onlycurrentThe value for Polarization mode dispersion (unit: ps).
1.3.6.1.4.1.7483.2.2.3.5.2.4.1.12ColumntnDcmCardProvisionedFiberTyperead-createcurrentThe type of fiber that the DCM is provisioned to dispersion-compensate.
1.3.6.1.4.1.7483.2.2.3.5.2.8TabletnPowerControlCardTablenot-accessiblecurrentA table of Power Control card specific attributes.
1.3.6.1.4.1.7483.2.2.3.5.2.8.1RowtnPowerControlCardEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.8.1.1ColumntnPowerControlCardCapabilityProgrammedread-createcurrentThe Power Control card programmed capability.
1.3.6.1.4.1.7483.2.2.3.5.2.8.1.2ColumntnPowerControlCardCapabilityPresentread-onlycurrentThe Power Control card capability present.
1.3.6.1.4.1.7483.2.2.3.5.2.8.1.3ColumntnPowerControlCardCapabilityInUseread-onlycurrentIndicates if the Power Control card capability is in use by the system for services.
1.3.6.1.4.1.7483.2.2.3.5.2.9TabletnWssCardTablenot-accessiblecurrentA table of WSS card specific attributes.
1.3.6.1.4.1.7483.2.2.3.5.2.9.1RowtnWssCardEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.9.1.1ColumntnWssCardAddPathTargetPowerread-createcurrentThe desired power at the output of the amplet inside the WSS. Current configurable range: -1000 to 1000.
1.3.6.1.4.1.7483.2.2.3.5.2.9.1.2ColumntnWssCardAddPathEgressPowerread-createcurrentThe desired output power for add services as they come out the WDM port. Current configurable range: -3500 to 1100.
1.3.6.1.4.1.7483.2.2.3.5.2.9.1.3ColumntnWssCardAddPathTotalChannelread-createcurrentThe maximum number of channels supported on the add path. Current configurable ranges: CWR8: 8 to 44 CWR8-88: 8 to 88.
1.3.6.1.4.1.7483.2.2.3.5.2.9.1.4ColumntnWssCardReservedDegreeread-createcurrentThe reserved degree. Current configurable ranges: CWR8: 1 to 8 CWR8-88: 1 to 8 WR2: 1 to 2 WR2-88: 1 to 2 WR8-88A: 1 to 8.
1.3.6.1.4.1.7483.2.2.3.5.2.9.1.5ColumntnWssCardLnsEnableread-createcurrentThe flag to turn on/off the LNS laser.
1.3.6.1.4.1.7483.2.2.3.5.2.9.1.6ColumntnWssCardLnsPowerread-onlycurrentThe output power of the LNS laser. Current range: -9900 to 1000.
1.3.6.1.4.1.7483.2.2.3.5.2.9.1.9ColumntnWssCardAdBlockLevelAddread-createcurrentCurrent configurable values: CWR8-88: 0, 3. WR8-88A: 0, 1, 2. WR20-TF: 0.
1.3.6.1.4.1.7483.2.2.3.5.2.9.1.10ColumntnWssCardAdBlockLevelDropread-createcurrentCurrent configurable values: CWR8-88: 0, 3. WR8-88A: 0, 1, 2. WR20-TF: 0.
1.3.6.1.4.1.7483.2.2.3.5.2.9.1.11ColumntnWssCardIsFlexgridread-onlycurrentIndicates if the card Wavelength Selective Switch(es) supports flexible frequency slices. Defval: 1 for WR8-88AF, WR20-TF, WR20-TFM, WR20TFML. 0 for all others.
1.3.6.1.4.1.7483.2.2.3.5.2.9.1.12ColumntnWssCardGranularityMHzread-onlycurrentIndicates the granularity (minimum slice size multiple) of the card Wavelength Selective Switch(es). If tnFlexgridOtsInfoLineWssIsFlexgrid is true, the upper f…
1.3.6.1.4.1.7483.2.2.3.5.2.9.1.13ColumntnWssCardEnableFilterlessDgeread-createcurrentSets the Dynamic Gain Equalizer functionality to regular or filterless mode.Supported for WR20-TF, WR20-TFM, WR20TFML cards. Changing value in-service is servi…
1.3.6.1.4.1.7483.2.2.3.5.2.10TabletnSfdCardTablenot-accessiblecurrentA table of SFD card specific attributes.
1.3.6.1.4.1.7483.2.2.3.5.2.10.1RowtnSfdCardEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.10.1.1ColumntnSfdCardAverageMuxInsertionLossread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.10.1.2ColumntnSfdCardAverageDemuxInsertionLossread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.11TabletnSonetSdhPpSectionCardTablenot-accessiblecurrentSONET/SDH PP Section resource allocation.
1.3.6.1.4.1.7483.2.2.3.5.2.11.1RowtnSonetSdhPpSectionCardEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.11.1.1ColumntnSonetSdhPpSection1Portread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.11.1.2ColumntnSonetSdhPpSection2Portread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.11.1.3ColumntnSonetSdhPpSection3Portread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.11.1.4ColumntnSonetSdhPpSection4Portread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.11.1.5ColumntnSonetSdhPpSection5Portread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.11.1.6ColumntnSonetSdhPpSection6Portread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.11.1.7ColumntnSonetSdhPpSection7Portread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.11.1.8ColumntnSonetSdhPpSection8Portread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.11.1.9ColumntnSonetSdhPpSection1IfTyperead-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.11.1.10ColumntnSonetSdhPpSection2IfTyperead-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.11.1.11ColumntnSonetSdhPpSection3IfTyperead-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.11.1.12ColumntnSonetSdhPpSection4IfTyperead-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.11.1.13ColumntnSonetSdhPpSection5IfTyperead-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.11.1.14ColumntnSonetSdhPpSection6IfTyperead-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.11.1.15ColumntnSonetSdhPpSection7IfTyperead-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.11.1.16ColumntnSonetSdhPpSection8IfTyperead-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.12TabletnPcsSectionCardTablenot-accessiblecurrentPCS Section resource allocation.
1.3.6.1.4.1.7483.2.2.3.5.2.12.1RowtnPcsSectionCardEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.12.1.1ColumntnPcsSection1Portread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.12.1.2ColumntnPcsSection2Portread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.12.1.3ColumntnPcsSection3Portread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.12.1.4ColumntnPcsSection4Portread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.12.1.5ColumntnPcsSection5Portread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.12.1.6ColumntnPcsSection6Portread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.12.1.7ColumntnPcsSection7Portread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.12.1.8ColumntnPcsSection8Portread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.12.1.9ColumntnPcsSection9Portread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.12.1.10ColumntnPcsSection10Portread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.12.1.11ColumntnPcsSection1IfTyperead-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.12.1.12ColumntnPcsSection2IfTyperead-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.12.1.13ColumntnPcsSection3IfTyperead-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.12.1.14ColumntnPcsSection4IfTyperead-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.12.1.15ColumntnPcsSection5IfTyperead-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.12.1.16ColumntnPcsSection6IfTyperead-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.12.1.17ColumntnPcsSection7IfTyperead-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.12.1.18ColumntnPcsSection8IfTyperead-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.12.1.19ColumntnPcsSection9IfTyperead-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.12.1.20ColumntnPcsSection10IfTyperead-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.14Tabletn11dpge12CardTablenot-accessiblecurrentA table of 11dpge12 card specific attributes.
1.3.6.1.4.1.7483.2.2.3.5.2.14.1Rowtn11dpge12CardEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.14.1.1Columntn11dpge12CardRateModeread-createcurrentThe card rate mode for 11DPGE12.
1.3.6.1.4.1.7483.2.2.3.5.2.14.1.2Columntn11dpge12QINQModeTPIDread-createcurrentThe Q in Q Mode TPID for 11DPGE12. Current configurable range: 0x00 to 0xFFFF.
1.3.6.1.4.1.7483.2.2.3.5.2.15TabletnSfcCardTablenot-accessiblecurrentA table of SFC card specific attributes.
1.3.6.1.4.1.7483.2.2.3.5.2.15.1RowtnSfcCardEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.15.1.1ColumntnSfcCardFiberModeread-createcurrentFiber Mode for SFC cards.
1.3.6.1.4.1.7483.2.2.3.5.2.18Tabletn11dpe12eCardTablenot-accessiblecurrentA table of 11DPE12E card specific attributes.
1.3.6.1.4.1.7483.2.2.3.5.2.18.1Rowtn11dpe12eCardEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.18.1.1Columntn11dpe12eCardRateModeread-createcurrentThe card rate mode for 11DPE12E.
1.3.6.1.4.1.7483.2.2.3.5.2.18.1.2Columntn11dpe12eQINQModeTPID1read-createcurrentThe Q in Q Mode TPID1 for 11DPE12E. Current configurable range: 0x00 to 0xFFFF.
1.3.6.1.4.1.7483.2.2.3.5.2.18.1.3Columntn11dpe12eQINQModeTPID2read-createcurrentThe Q in Q Mode TPID2 for 11DPE12E. Current configurable range: 0x00 to 0xFFFF.
1.3.6.1.4.1.7483.2.2.3.5.2.18.1.4Columntn11dpe12eQINQModeTPID3read-createcurrentThe Q in Q Mode TPID3 for 11DPE12E. Current configurable range: 0x00 to 0xFFFF.
1.3.6.1.4.1.7483.2.2.3.5.2.18.1.5Columntn11dpe12eQINQModeTPID4read-createcurrentThe Q in Q Mode TPID4 for 11DPE12E. Current configurable range: 0x00 to 0xFFFF.
1.3.6.1.4.1.7483.2.2.3.5.2.18.1.6Columntn11dpe12eQINQModeFlowCmread-createcurrentThe flow control mode for 11DPE12E.
1.3.6.1.4.1.7483.2.2.3.5.2.19Tabletn1dpp24mCardTablenot-accessiblecurrentA table of 1DPP24M card specific attributes.
1.3.6.1.4.1.7483.2.2.3.5.2.19.1Rowtn1dpp24mCardEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.19.1.1Columntn1dpp24mCardFunctionModeread-createcurrent1DPP24M with master mode provides 21 E1 client access and one line port (STM-1/OC-3). The master card line port maps up to a maximum of 42 E1 (21 E1 from slave…
1.3.6.1.4.1.7483.2.2.3.5.2.19.1.2Columntn1dpp24mCardImpedanceread-createcurrentNominal impedance of E1 interfaces. Valid values are: -75ohm -120ohm.
1.3.6.1.4.1.7483.2.2.3.5.2.21TabletnOpsCardTablenot-accessiblecurrentA table of OPS optical card specific attributes.
1.3.6.1.4.1.7483.2.2.3.5.2.21.1RowtnOpsCardEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.21.1.1ColumntnOpsCardProtectionModeread-createcurrentThis attribute determines the protection mode. Defaults: OPSA: ochp OPSB: otup.
1.3.6.1.4.1.7483.2.2.3.5.2.22Tabletn11dpe12aCardTablenot-accessiblecurrentA table of 11DPE12A card specific attributes.
1.3.6.1.4.1.7483.2.2.3.5.2.22.1Rowtn11dpe12aCardEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.22.1.1Columntn11dpe12aCardRateModeread-createcurrentThe card rate mode for 11dpe12a.
1.3.6.1.4.1.7483.2.2.3.5.2.22.1.2Columntn11dpe12aCardQINQModeTPID1read-createcurrentThe Q in Q Mode TPID1 for 11dpe12a. Current configurable range: 0x00 to 0xFFFF.
1.3.6.1.4.1.7483.2.2.3.5.2.22.1.3Columntn11dpe12aCardQINQModeTPID2read-createcurrentThe Q in Q Mode TPID2 for 11dpe12a. Current configurable range: 0x00 to 0xFFFF.
1.3.6.1.4.1.7483.2.2.3.5.2.22.1.4Columntn11dpe12aCardQINQModeTPID3read-createcurrentThe Q in Q Mode TPID3 for 11dpe12a. Current configurable range: 0x00 to 0xFFFF.
1.3.6.1.4.1.7483.2.2.3.5.2.22.1.5Columntn11dpe12aCardQINQModeTPID4read-createcurrentThe Q in Q Mode TPID4 for 11dpe12a. Current configurable range: 0x00 to 0xFFFF.
1.3.6.1.4.1.7483.2.2.3.5.2.22.1.6Columntn11dpe12aCardLBMIntervalread-createcurrentThe interval between consequent LBM messages. Current configurable range: 0 and [1000, 1100, ..., 10000] in increment of 100.
1.3.6.1.4.1.7483.2.2.3.5.2.22.1.7Columntn11dpe12aCardLBRTimeoutread-createcurrentLBR timeout. Current configurable range: 1 to 30.
1.3.6.1.4.1.7483.2.2.3.5.2.22.1.8Columntn11dpe12aCardFlowCmread-createcurrentThe flow control mode for 11DPE12A.
1.3.6.1.4.1.7483.2.2.3.5.2.22.1.9Columntn11dpe12aCardSLRTimeoutread-createcurrentSLR timeout. Current configurable range: 1 to 10.
1.3.6.1.4.1.7483.2.2.3.5.2.22.1.10Columntn11dpe12aCardCrossPackServiceSupportedread-createcurrentThe cross pack service supported value for 11DPE12A.
1.3.6.1.4.1.7483.2.2.3.5.2.23TabletnCardFunctionModeTablenot-accessiblecurrentA table of card function mode.
1.3.6.1.4.1.7483.2.2.3.5.2.23.1RowtnCardFunctionModeEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.23.1.1ColumntnCardFunctionModeread-createcurrentThis attribute determines the card's firmware image type, and therefore affects many aspects of card and port behavior. When this attribute is changed, the car…
1.3.6.1.4.1.7483.2.2.3.5.2.24Tabletn112pdm11CardTablenot-accessiblecurrentA table of 112PDM11 card specific attributes.
1.3.6.1.4.1.7483.2.2.3.5.2.24.1Rowtn112pdm11CardEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.24.1.1Columntn112pdm11CardMaxDMNumbersread-onlycurrentThe maximum source delay measurement (DM) number that can be supported.
1.3.6.1.4.1.7483.2.2.3.5.2.24.1.2Columntn112pdm11CardUsedDMNumbersread-onlycurrentThe used source delay measurement (DM) number.
1.3.6.1.4.1.7483.2.2.3.5.2.25ScalartnPtpctlCardAttributeTotalread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.26TabletnPtpctlCardTablenot-accessiblecurrentA table of PTPCTL card specific attributes.
1.3.6.1.4.1.7483.2.2.3.5.2.26.1RowtnPtpctlCardEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.26.1.1ColumntnPtpctlCardEqpsLEDColorread-onlycurrentThe color of the EQPS status LED.
1.3.6.1.4.1.7483.2.2.3.5.2.26.1.2ColumntnPtpctlCardEqpsLEDStateread-onlycurrentThe state of the EQPS status LED.
1.3.6.1.4.1.7483.2.2.3.5.2.26.1.3ColumntnPtpctlCardPtpLEDColorread-onlycurrentThe color of the PTP time synchronous status LED.
1.3.6.1.4.1.7483.2.2.3.5.2.26.1.4ColumntnPtpctlCardPtpLEDStateread-onlycurrentThe state of the PTP time synchronous status LED.
1.3.6.1.4.1.7483.2.2.3.5.2.27ScalartnWtocmaCardAttributeTotalread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.28TabletnWtocmaCardTablenot-accessiblecurrentA table of WTOCMA card specific attributes.
1.3.6.1.4.1.7483.2.2.3.5.2.28.1RowtnWtocmaCardEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.28.1.1ColumntnWtocmaCardOsnrScanread-createcurrentStart on-demand OSNR scan. When read back, the value of this attribute is noCmd.
1.3.6.1.4.1.7483.2.2.3.5.2.28.1.2ColumntnWtocmaCardOsnrScanAbortread-createcurrentAbort on-demand OSNR scan. When read back, the value of this attribute is noCmd.
1.3.6.1.4.1.7483.2.2.3.5.2.28.1.3ColumntnWtocmaCardOsnrScanStatusread-onlycurrentOn-demand OSNR scan status.
1.3.6.1.4.1.7483.2.2.3.5.2.28.1.4ColumntnWtocmaCardDspStateread-onlycurrentDSP current state.
1.3.6.1.4.1.7483.2.2.3.5.2.29ScalartnCruCardAttributeTotalread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.30TabletnCruCardTablenot-accessiblecurrentA table of CRU card specific attributes.
1.3.6.1.4.1.7483.2.2.3.5.2.30.1RowtnCruCardEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.30.1.1ColumntnCruCardActivityStateread-onlycurrentCRU card activity states.
1.3.6.1.4.1.7483.2.2.3.5.2.30.1.2ColumntnCruCardEqpsLEDColorread-onlycurrentThe color of the CRU EQPS status LED.
1.3.6.1.4.1.7483.2.2.3.5.2.30.1.3ColumntnCruCardEqpsLEDStateread-onlycurrentThe state of the CRU EQPS status LED.
1.3.6.1.4.1.7483.2.2.3.5.2.30.1.4ColumntnFCruProtectionRoleread-createcurrentFCRU card protection role.
1.3.6.1.4.1.7483.2.2.3.5.2.31ScalartnIroadmCardConfigAttributeTotalread-onlycurrentTotal number of attributes in tnIroadmCardConfigTable.
1.3.6.1.4.1.7483.2.2.3.5.2.32TabletnIroadmCardConfigTablenot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.32.1RowtnIroadmCardConfigEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.32.1.1ColumntnIroadmCardConfigOptIntDetectionread-createcurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.32.1.2ColumntnIroadmCardConfigOptIntBaselineread-createcurrentCurrent configurable range: -100, 100 to 5000.
1.3.6.1.4.1.7483.2.2.3.5.2.32.1.3ColumntnIroadmCardConfigOptIntLossThresholdread-createcurrentCurrent configurable range: 100 to 500.
1.3.6.1.4.1.7483.2.2.3.5.2.32.1.4ColumntnIroadmCardConfigOptIntPollPeriodread-createcurrentCurrent configurable range: 20 to 120.
1.3.6.1.4.1.7483.2.2.3.5.2.32.1.5ColumntnIroadmCardConfigOptIntClearAlarmread-createcurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.33ScalartnIroadmCardInfoAttributeTotalread-onlycurrentTotal no of attributes in tnIroadmCardInfoTable.
1.3.6.1.4.1.7483.2.2.3.5.2.34TabletnIroadmCardInfoTablenot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.34.1RowtnIroadmCardInfoEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.34.1.1ColumntnIroadmCardInfoIngressOAMPumpTemperatureread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.34.1.2ColumntnIroadmCardInfoIngressOAMPumpBiasread-onlycurrentCurrent range: -100, 100 to 5000.
1.3.6.1.4.1.7483.2.2.3.5.2.34.1.3ColumntnIroadmCardInfoEgressOAMPumpTemperatureread-onlycurrentCurrent range: 100 to 500.
1.3.6.1.4.1.7483.2.2.3.5.2.34.1.4ColumntnIroadmCardInfoEgressOAMPumpBiasread-onlycurrentCurrent range: 20 to 120.
1.3.6.1.4.1.7483.2.2.3.5.2.34.1.5ColumntnIroadmCardInfoOptIntSpanLossread-onlycurrentCurrent range: 0 to 9900.
1.3.6.1.4.1.7483.2.2.3.5.2.34.1.6ColumntnIroadmCardInfoWssIsFlexgridread-onlycurrentIndicates if the card Wavelength Selective Switch(es) supports flexible frequency slices. Defval: 1 for WR8-88AF, WR20-TF, WR20-TFM, WR20TFML. 0 for all others.
1.3.6.1.4.1.7483.2.2.3.5.2.34.1.7ColumntnIroadmCardInfoWssGranularityMHzread-onlycurrentIndicates the granularity (minimum slice size multiple) of the card Wavelength Selective Switch(es). If tnFlexgridOtsInfoLineWssIsFlexgrid is true, the upper f…
1.3.6.1.4.1.7483.2.2.3.5.2.35ScalartnIsonCardModeAttributeTotalread-onlycurrentTotal no of attributes in tnIsonCardInfoTable.
1.3.6.1.4.1.7483.2.2.3.5.2.36TabletnIsonCardModeTablenot-accessiblecurrentA table of ISON card mode specific attributes.
1.3.6.1.4.1.7483.2.2.3.5.2.36.1RowtnIsonCardModeEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.36.1.1ColumntnIsonCardModeSelectionread-createcurrentISON Card selection mode.
1.3.6.1.4.1.7483.2.2.3.5.2.38ScalartnCardEtherTypeProfileAttributeTotalread-onlycurrentTotal no of attributes in tnCardEtherTypeProfileTable.
1.3.6.1.4.1.7483.2.2.3.5.2.39TabletnCardEtherTypeProfileTablenot-accessiblecurrentThe TnEtherTypeProfileTable has an entry for each Ethernet IOM card in each chassis in the TMNX system.
1.3.6.1.4.1.7483.2.2.3.5.2.39.1RowtnCardEtherTypeProfileEntrynot-accessiblecurrentEach row entry represents an ethertype configuration profile which can be associated with each ethernet port.
1.3.6.1.4.1.7483.2.2.3.5.2.39.1.1ColumntnCardEthertypeQinQIDnot-accessiblecurrentEthertype profile ID in QinQ mode. ID 1 is the default profile.
1.3.6.1.4.1.7483.2.2.3.5.2.39.1.2ColumntnCardEthertypeQinQDescread-createcurrentThis object specifies the description of ethertype profile.
1.3.6.1.4.1.7483.2.2.3.5.2.39.1.3ColumntnCardEthertypeQinQEtyperead-createcurrentThis object specifies the ethertype used by ethernet port.
1.3.6.1.4.1.7483.2.2.3.5.2.39.1.4ColumntnCardEthertypeQinQRowStatusread-createcurrentThe value of tnCardEthertypeQinQRowStatus defines the status of the row.
1.3.6.1.4.1.7483.2.2.3.5.2.40ScalartnAutomationConfigAttributeTotalread-onlycurrentTotal number of attributes in tnAutomationConfigTable.
1.3.6.1.4.1.7483.2.2.3.5.2.41TabletnAutomationConfigTablenot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.41.1RowtnAutomationConfigEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.41.1.1ColumntnAutomationConfigAutoTopoDegreeNumberread-createcurrentCurrent configurable range: 0 to 1000.
1.3.6.1.4.1.7483.2.2.3.5.2.44ScalartnSfd5CardAttributeTotalread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.45TabletnSfd5CardTablenot-accessiblecurrentA table of SFD5 card specific attributes.
1.3.6.1.4.1.7483.2.2.3.5.2.45.1RowtnSfd5CardEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.45.1.1ColumntnSfd5CardPortLossCh1read-onlycurrentPort loss measurement in channel 1
1.3.6.1.4.1.7483.2.2.3.5.2.45.1.2ColumntnSfd5CardPortLossCh2read-onlycurrentPort loss measurement in channel 2
1.3.6.1.4.1.7483.2.2.3.5.2.45.1.3ColumntnSfd5CardPortLossCh3read-onlycurrentPort loss measurement in channel 3
1.3.6.1.4.1.7483.2.2.3.5.2.45.1.4ColumntnSfd5CardPortLossCh4read-onlycurrentPort loss measurement in channel 4
1.3.6.1.4.1.7483.2.2.3.5.2.45.1.5ColumntnSfd5CardPortLossCh5read-onlycurrentPort loss measurement in channel 5
1.3.6.1.4.1.7483.2.2.3.5.2.45.1.6ColumntnSfd5CardPortLossCh6read-onlycurrentPort loss measurement in channel 6
1.3.6.1.4.1.7483.2.2.3.5.2.45.1.7ColumntnSfd5CardPortLossCh7read-onlycurrentPort loss measurement in channel 7
1.3.6.1.4.1.7483.2.2.3.5.2.45.1.8ColumntnSfd5CardPortLossCh8read-onlycurrentPort loss measurement in channel 8
1.3.6.1.4.1.7483.2.2.3.5.2.45.1.9ColumntnSfd5CardPortLossCh9read-onlycurrentPort loss measurement in channel 9
1.3.6.1.4.1.7483.2.2.3.5.2.45.1.10ColumntnSfd5CardPortLossCh10read-onlycurrentPort loss measurement in channel 10
1.3.6.1.4.1.7483.2.2.3.5.2.45.1.11ColumntnSfd5CardPortLossEXPread-onlycurrentPort loss measurement
1.3.6.1.4.1.7483.2.2.3.5.2.45.1.12ColumntnSfd5CardAveBIUFibLenread-onlycurrentAverage BIU fiber length
1.3.6.1.4.1.7483.2.2.3.5.2.45.1.13ColumntnSfd5CardAveBIDFibLenread-onlycurrentAverage BID fiber length
1.3.6.1.4.1.7483.2.2.3.5.2.46ScalartnSfd10CardAttributeTotalread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.47TabletnSfd10CardTablenot-accessiblecurrentA table of SFD10 card specific attributes.
1.3.6.1.4.1.7483.2.2.3.5.2.47.1RowtnSfd10CardEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.1ColumntnSfd10CardDMuxPortLossCh1read-onlycurrentDMUX port loss measurement in channel 1
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.2ColumntnSfd10CardDMuxPortLossCh2read-onlycurrentDMUX port loss measurement in channel 2
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.3ColumntnSfd10CardDMuxPortLossCh3read-onlycurrentDMUX port loss measurement in channel 3
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.4ColumntnSfd10CardDMuxPortLossCh4read-onlycurrentDMUX port loss measurement in channel 4
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.5ColumntnSfd10CardDMuxPortLossCh5read-onlycurrentDMUX port loss measurement in channel 5
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.6ColumntnSfd10CardDMuxPortLossCh6read-onlycurrentDMUX port loss measurement in channel 6
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.7ColumntnSfd10CardDMuxPortLossCh7read-onlycurrentDMUX port loss measurement in channel 7
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.8ColumntnSfd10CardDMuxPortLossCh8read-onlycurrentDMUX port loss measurement in channel 8
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.9ColumntnSfd10CardDMuxPortLossCh9read-onlycurrentDMUX port loss measurement in channel 9
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.10ColumntnSfd10CardDMuxPortLossCh10read-onlycurrentDMUX port loss measurement in channel 10
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.11ColumntnSfd10CardDMuxPortLossEXPread-onlycurrentDMUX port loss measurement
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.12ColumntnSfd10CardMuxPortLossCh1read-onlycurrentMUX port loss measurement in channel 1
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.13ColumntnSfd10CardMuxPortLossCh2read-onlycurrentMUX port loss measurement in channel 2
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.14ColumntnSfd10CardMuxPortLossCh3read-onlycurrentMUX port loss measurement in channel 3
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.15ColumntnSfd10CardMuxPortLossCh4read-onlycurrentMUX port loss measurement in channel 4
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.16ColumntnSfd10CardMuxPortLossCh5read-onlycurrentMUX port loss measurement in channel 5
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.17ColumntnSfd10CardMuxPortLossCh6read-onlycurrentMUX port loss measurement in channel 6
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.18ColumntnSfd10CardMuxPortLossCh7read-onlycurrentMUX port loss measurement in channel 7
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.19ColumntnSfd10CardMuxPortLossCh8read-onlycurrentMUX port loss measurement in channel 8
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.20ColumntnSfd10CardMuxPortLossCh9read-onlycurrentMUX port loss measurement in channel 9
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.21ColumntnSfd10CardMuxPortLossCh10read-onlycurrentMUX port loss measurement in channel 10
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.22ColumntnSfd10CardMuxPortLossEXPread-onlycurrentMUX port loss measurement
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.23ColumntnSfd10CardAveMuxFibLenread-onlycurrentAverage MUX fiber length
1.3.6.1.4.1.7483.2.2.3.5.2.47.1.24ColumntnSfd10CardAveDMUXFibLenread-onlycurrentAverage DMUX fiber length
1.3.6.1.4.1.7483.2.2.3.5.2.48ScalartnDcmxCardAttributeTotalread-onlycurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.49TabletnDcmxCardTablenot-accessiblecurrentA table of DCM card specific attributes.
1.3.6.1.4.1.7483.2.2.3.5.2.49.1RowtnDcmxCardEntrynot-accessiblecurrent.
1.3.6.1.4.1.7483.2.2.3.5.2.49.1.1ColumntnDcmxCardFiberTyperead-onlycurrentThe type of fiber that the DCM is designed to dispersion-compensate.
1.3.6.1.4.1.7483.2.2.3.5.2.49.1.2ColumntnDcmxCardDcmSizeread-onlycurrentThe length of TRANSMISSION fiber that the DCM is designed to compensate (unit: km).
1.3.6.1.4.1.7483.2.2.3.5.2.49.1.3ColumntnDcmxCardAverageInsertionLossDCF1read-onlycurrentThe measured insertion loss averaged over wavelength with no external attenuation added to the DCM (unit:dB) for DCF.
1.3.6.1.4.1.7483.2.2.3.5.2.49.1.4ColumntnDcmxCardInsertionLossSlopeDCF1read-onlycurrentA linear least-squares fitted slope of the measured attenuation (positive or negative) over the wavelength range with no external attenuation added to the DCM …
1.3.6.1.4.1.7483.2.2.3.5.2.49.1.5ColumntnDcmxCardTotalDispFitDCF1read-onlycurrentCoefficients A, B, C and D of a 3rd Order polynomial fit of chromatic dispersion vs. wavelength from 1528 to 1565nm in 0.4-2.0nm steps for DCF such that TotalD…
1.3.6.1.4.1.7483.2.2.3.5.2.49.1.6ColumntnDcmxCardDispFiberLengthDCF1read-onlycurrentThe total length of dispersion fibre of DCF inside the DCM module, to the closest km (unit: km).
1.3.6.1.4.1.7483.2.2.3.5.2.49.1.7ColumntnDcmxCardPMDDCF1read-onlycurrentThe value for Polarization mode dispersion (unit:ps) for DCF.
1.3.6.1.4.1.7483.2.2.3.5.2.49.1.8ColumntnDcmxCardAverageInsertionLossDCF2read-onlycurrentThe measured insertion loss averaged over wavelength with no external attenuation added to the DCM (unit: dB) for DCF2. LM DCM only.
1.3.6.1.4.1.7483.2.2.3.5.2.49.1.9ColumntnDcmxCardInsertionLossSlopeDCF2read-onlycurrentA linear least-squares fitted slope of the measured attenuation (positive or negative) over the wavelength range with no external attenuation added to the DCM …
1.3.6.1.4.1.7483.2.2.3.5.2.49.1.10ColumntnDcmxCardTotalDispFitDCF2read-onlycurrentCoefficients A, B, C and D of a 3rd Order polynomial fit of chromatic dispersion vs. wavelength from 1528 to 1565nm in 0.4-2.0nm steps for DCF2 such that Total…
1.3.6.1.4.1.7483.2.2.3.5.2.49.1.11ColumntnDcmxCardDispFiberLengthDCF2read-onlycurrentThe total length of dispersion fiber of DCF2 inside the DCM module, to the closest km (unit:km). LM DCM only.
1.3.6.1.4.1.7483.2.2.3.5.2.49.1.12ColumntnDcmxCardPMDDCF2read-onlycurrentThe value for Polarization mode dispersion (unit:ps) for DCF2. LM DCM only.
1.3.6.1.4.1.7483.2.2.3.5.2.49.1.13ColumntnDcmxCardLatencyMismatchread-onlycurrentThe latency mismatches value of the DCF1 and DCF2 in the module. Latency mismatch value = DCF1- DCF2. LM DCM only.
1.3.6.1.4.1.7483.2.2.3.5.2.49.1.14ColumntnDcmxCardLatencyread-onlycurrentThe latency value of the DCF in the module. Bidi DCM only.
Type Definitions
NameSyntaxStatusDescription
AluWdmPcsSectionIfTypeINTEGER { none(1), gige(2), fc100(3), fc200(4), fc400(5) }currentVTS source.
AluWdmSonetSdhPpSectionIfTypeINTEGER { none(1), oc3(2), oc12(3), oc48(4), stm1(5), stm4(6), stm16(7) }currentVTS source.
TropicDcmInvDcmSizeOCTET STRING (SIZE(0..5))currentReadable DCM transmission fiber length string (unit: km).
TropicDcmInvDispersionFitOCTET STRING (SIZE(0..41))currentReadable DCM dispersion fit string. The format is [+-]x.xxxE[+-]xx[+-]x.xxxE[+-]xx[+-]x.xxxE[+-]xx[+-]x.xxxE[+-]xx
TropicDcmInvFiberLengthOCTET STRING (SIZE(0..5))currentReadable string for dispersion fiber length inside DCM module (unit: km).
TropicDcmInvFiberTypeOCTET STRING (SIZE(0..5))currentReadable DCM Fiber Type string.
TropicDcmInvInsertionLossOCTET STRING (SIZE(0..5))currentReadable insertion loss string (unit: dB).
TropicDcmInvInsertionLossSlopeOCTET STRING (SIZE(0..5))currentReadable insertion loss slope string (unit: dB). The format is [+-]x.x
TropicDcmInvLatencyOCTET STRING (SIZE(0..5))currentReadable DCM Latency. The format is [+-]x.x
TropicDcmInvLatencyMismatchOCTET STRING (SIZE(0..5))currentReadable DCM Latency Mismatch string. The format is [+-]x.x
TropicDcmInvPmdOCTET STRING (SIZE(0..5))currentReadable DCM Polarization Mode Dispersion Type string (unit: ps).
TropicSfdInvFiberLengthOCTET STRING (SIZE(0..6))currentFiber Length, in centimetres (0.01m).
TropicSfdInvPortLossOCTET STRING (SIZE(0..5))currentReadable SFD Port Loss Type string.
MIB Viewer