TROPIC-POWERMGMT-MIB
265 objects
The power management MIB.
Imported Objects
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| TROPIC-GLOBAL-REG | tnPowerMgmtMIB tnSystemModules |
| TROPIC-SHELF-MIB | tnShelfIndex |
| TROPIC-SLOT-MIB | tnSlotIndex |
| TROPIC-TC | AluWdmOtuBitRate AluWdmOtuEncoding TnCommand |
| TROPIC-WAVEKEY-MIB | tnChannel tnDirection |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7483.1.1.2.1.7 | IdentitytnPowerMgmtMibModule | The power management MIB. | ||
| 1.3.6.1.4.1.7483.2.1.6.1 | NodetnPowerMgmtConf | |||
| 1.3.6.1.4.1.7483.2.1.6.1.1 | NodetnPowerMgmtGroups | |||
| 1.3.6.1.4.1.7483.2.1.6.1.1.1 | GrouptnPowerMgmtGlobalGroup | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.1.1.2 | GrouptnPowerMgmtControlGroup | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.1.1.4 | GrouptnPowerMgmtIngressGroup | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.1.1.5 | GrouptnPowerMgmtEgressGroup | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.1.1.7 | GrouptnPowerMgmtPortGroup | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.1.1.9 | GrouptnPowerMgmtPowerOffsetInGroup | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.1.1.10 | GrouptnPowerMgmtPowerOffsetOutGroup | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.1.1.11 | GrouptnPowerMgmtIngressPerChannelGroup | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.1.1.12 | GrouptnPowerMgmtEgressPerChannelGroup | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.1.1.13 | GrouptnPowerMgmtTechnologyTypesGroup | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.1.1.14 | GrouptnPowerMgmtAnyAddGroup | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.1.1.15 | GrouptnPowerMgmtAnyDropGroup | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.1.1.16 | GrouptnPowerMgmtIroadmScalarsGroup | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.1.1.17 | GrouptnPowerMgmtIroadmGroup | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.1.1.18 | GrouptnPowerMgmtCapabilitiesCardScalarsGroup | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.1.1.19 | GrouptnPowerMgmtCapabilitiesCardGroup | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.1.1.20 | GrouptnPowerMgmtIngressPortGroup | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.1.1.21 | GrouptnPowerMgmtEgressPortGroup | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.1.1.22 | GrouptnPowerMgmtIngressPortPerChannelGroup | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.1.1.23 | GrouptnPowerMgmtEgressPortPerChannelGroup | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.1.1.24 | GrouptnPowerMgmtCapabilitiesPortScalarsGroup | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.1.1.25 | GrouptnPowerMgmtCapabilitiesPortGroup | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.1.2 | NodetnPowerMgmtCompliances | |||
| 1.3.6.1.4.1.7483.2.1.6.1.2.1 | CompliancetnPowerMgmtCompliance | current | . | |
| 1.3.6.1.4.1.7483.2.1.6.2 | NodetnPowerMgmtObjs | |||
| 1.3.6.1.4.1.7483.2.1.6.2.1 | NodetnPowerMgmtBasics | |||
| 1.3.6.1.4.1.7483.2.1.6.2.1.1 | NodetnPowerMgmtGlobal | |||
| 1.3.6.1.4.1.7483.2.1.6.2.1.1.2 | ScalartnPowerMgmtGlobalMinStepSize | read-write | current | If the change in power for a given wavelength calculated over one auto power adjustment control loop pass is less than the value of this attribute, no change i… |
| 1.3.6.1.4.1.7483.2.1.6.2.1.1.3 | ScalartnPowerMgmtGlobalMaxStepSize | read-write | current | The maximum change in power per wavelength permitted over one auto power adjustment control loop pass. Sets are not supported. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.1.4 | ScalartnPowerMgmtGlobalResetToDefaults | read-write | current | When read, the value of this attribute is always noCmd. Sets are not supported. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.1.5 | ScalartnPowerMgmtGlobalAutoEnabled | read-write | current | Indicates if the automatic functioning of power management is enabled. Sets are not supported. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.1.6 | ScalartnPowerMgmtGlobalNumberOfAutoPowerAdjPoints | read-only | current | The current number of auto power adjustment points. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.1.7 | ScalartnPowerMgmtGlobalAlarmWhenDisabled | read-write | current | Indicates if the automatic power management disabled alarm will be raised when auto power management is disabled. Sets are not supported. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.2 | TabletnPowerMgmtControlTable | not-accessible | current | This table provides access to auto power adjustment operation execution and status. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.2.1 | RowtnPowerMgmtControlEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.2.1.1 | ColumntnPowerMgmtDirection | not-accessible | current | The signal direction. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.2.1.3 | ColumntnPowerMgmtControlPercentCompleted | read-only | current | The percent completion of this auto power adjustment operation. Only applies when tnPowerMgmtControlStatus is inProgress. It should be 0 at all other times. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.2.1.5 | ColumntnPowerMgmtControlRowStatus | read-create | current | The following is a breakdown of each of the supported values: active - (r) auto power adjustment operating at this point. notInService - (r) auto power adjustm… |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4 | TabletnPowerMgmtIngressTable | not-accessible | current | The attributes in this table must not be set together with the same index in the same set request PDU. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1 | RowtnPowerMgmtIngressEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.1 | ColumntnPowerMgmtIngressAdjustPowerGain | read-create | current | Value executeWithForce is no longer supported. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.2 | ColumntnPowerMgmtIngressAdjustPowerGainLastResult | read-only | current | The result of the last executed power gain adjustment operation. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.3 | ColumntnPowerMgmtIngressAcceptPowers | read-create | current | Value executeWithClear is no longer supported. Sets with this value will be failed back to the network operator. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.4 | ColumntnPowerMgmtIngressAcceptPowersLastResult | read-only | current | The result of the last executed power acceptance operation. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.5 | ColumntnPowerMgmtIngressRippleAllowance | read-create | current | The ripple allowance. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.6 | ColumntnPowerMgmtIngressAdjustPowerGainTargetGain | read-only | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.7 | ColumntnPowerMgmtIngressAdjustPowerGainStatus | read-only | current | This attribute indicates the status of the executed power gain adjustment operation. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.8 | ColumntnPowerMgmtIngressStartAseAdjust | read-create | current | Start Amplified Spontaneous Emissions adjustment. Get requests always return a value of noCmd. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.9 | ColumntnPowerMgmtIngressAseAdjustLastResult | read-only | current | The result of the last executed ASE adjustment. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.10 | ColumntnPowerMgmtIngressAseAdjustStatus | read-only | current | This attribute indicates the status of the executed ASE adjustment operation. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.11 | ColumntnPowerMgmtIngressCommissioned | read-only | current | This attribute indicates if the ingress adjustment point has done a successful adjustment following being in an un-commissioned state. true - Adjusted successf… |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.12 | ColumntnPowerMgmtIngressGainSetOffset | read-create | current | Value added to result of gain adjustment calculation. Current configurable range: -300 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.13 | ColumntnPowerMgmtIngressCommissionedGain | read-only | current | Gain value set while commissioning flag is false. Current range: AHPHG: 0 to 3300 ALPHG: 0 to 3000 AHPLG: 0 to 2400 ALPFGK: 0 to 2300 ALPFGT: 0 to 2300 A2325A:… |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.14 | ColumntnPowerMgmtIngressSRSTiltPostFraction | read-create | current | Used to modify the fraction of upstream span SRS tilt post compensated. Current configurable range: 0 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.15 | ColumntnPowerMgmtIngressSRSTiltAdjResult | read-only | current | Result string describing outcome of the tilt adjustment. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.16 | ColumntnPowerMgmtIngressSRSTiltAdjStatus | read-only | current | Status of the tilt adjustment. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.17 | ColumntnPowerMgmtIngressPassed | read-only | current | Indicates the optimization adjustment failed or passed. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.18 | ColumntnPowerMgmtIngressSRSTiltCalcOffset | read-only | current | Indicates if the LD setting has been offset to compensate downstream TiltMismatch. Range: -500 to 500. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.19 | ColumntnPowerMgmtIngressInternodalOaPpcMaxInCurrent | read-only | current | Current range: -9900, -2000 to 0. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.20 | ColumntnPowerMgmtIngressInternodalOaPpcMaxInReference | read-only | current | Current range: -9900, -2000 to 0. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.21 | ColumntnPowerMgmtIngressInternodalCalculatedSpanLossInCurrent | read-only | current | Current range: -9900, 0 to 4000. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.22 | ColumntnPowerMgmtIngressInternodalCalculatedSpanLossInReference | read-only | current | Current range: -9900, 0 to 4000. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.23 | ColumntnPowerMgmtIngressSRSTiltPostFractionL | read-create | current | Used to modify the fraction of upstream span SRS tilt post compensated for L Band. Current configurable range: 0 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.24 | ColumntnPowerMgmtIngressGainSetOffsetL | read-create | current | Value added to result of gain adjustment calculation. Current configurable range: -300 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.25 | ColumntnPowerMgmtIngressAdjustPowerGainTargetGainL | read-only | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.26 | ColumntnPowerMgmtIngressCommissionedGainL | read-only | current | The EDFA gain value set when the line was adjusted while the degree commissioning flag was false. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.4.1.27 | ColumntnPowerMgmtIngressSRSTiltCalcOffsetL | read-only | current | Indicates if the LD setting has been offset to compensate downstream TiltMismatch. Range: -500 to 500. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5 | TabletnPowerMgmtEgressTable | not-accessible | current | The attributes in this table must not be set together with the same index in the same set request PDU. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1 | RowtnPowerMgmtEgressEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.1 | ColumntnPowerMgmtEgressAdjustPowerWithOptimization | read-create | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.2 | ColumntnPowerMgmtEgressAdjustPowerWithOptimizationStatus | read-only | current | This attribute indicates the status of the executed power with optimization adjustment operation. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.3 | ColumntnPowerMgmtEgressAdjustPowerWithOptimizationAbort | read-create | current | This attribute allows the network operator to submit an abort on the currently executing power with optimization adjustment operation. When read back, the valu… |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.4 | ColumntnPowerMgmtEgressAcceptPowers | read-create | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.6 | ColumntnPowerMgmtEgressAdjustPowerWithOptimizationLastResult | read-only | current | The result of the last executed power adjustment with optimization operation. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.7 | ColumntnPowerMgmtEgressAcceptPowersLastResult | read-only | current | The result of the last executed power acceptance operation. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.9 | ColumntnPowerMgmtEgressAdjustPowerWithOptimizationTargetGain | read-only | deprecated | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.10 | ColumntnPowerMgmtEgressStartAseAdjust | read-create | current | Start Amplified Spontaneous Emissions adjustment. Get requests always return a value of noCmd. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.11 | ColumntnPowerMgmtEgressStopAseAdjust | read-create | current | Stop Amplified Spontaneous Emissions adjustment. Get requests always return a value of noCmd. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.12 | ColumntnPowerMgmtEgressAseAdjustLastResult | read-only | current | The result of the last executed ASE adjustment. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.13 | ColumntnPowerMgmtEgressAseAdjustStatus | read-only | current | This attribute indicates the status of the executed ASE adjustment operation. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.14 | ColumntnPowerMgmtEgressCommissioned | read-only | current | This attribute indicates if the egress adjustment point has done a successful adjustment following being in an un-commissioned state. true - Adjusted successfu… |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.15 | ColumntnPowerMgmtEgressAmpIfIndex | read-only | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.16 | ColumntnPowerMgmtEgressWssIfIndex | read-only | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.17 | ColumntnPowerMgmtEgressSRSTiltCalcMultiplier | read-create | current | This is used to modify the calculated SRS tilt of the span. Current configurable range: 0 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.18 | ColumntnPowerMgmtEgressSRSTiltPreFraction | read-create | current | This is used to modify the fraction of following span SRS tilt pre compensated. Current configurable range: 0 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.19 | ColumntnPowerMgmtEgressSRSTiltCalcACoeff | read-create | current | Modeling coefficient for the SRSTilt = A*Pout(mW) equation. Current configurable range: 0 to 10000. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.20 | ColumntnPowerMgmtEgressSRSTiltCalcOutputLoss | read-create | current | Configurable loss from the egress Line Out to the fiber span input. Current configurable range: 0 to 1700. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.22 | ColumntnPowerMgmtEgressSRSTiltAdjResult | read-only | current | Result string describing outcome of the tilt adjustment. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.23 | ColumntnPowerMgmtEgressSRSTiltAdjStatus | read-only | current | Status of the tilt adjustment. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.24 | ColumntnPowerMgmtEgressPassed | read-only | current | Indicates the optimization adjust failed or passed. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.25 | ColumntnPowerMgmtEgressLHLaunchAtten | read-create | current | Added to the nominal attenuation lookup by WSS containing pack. Only applies to connectivity block in directionless architecture. Current configurable range: 0… |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.27 | ColumntnPowerMgmtFiberSpanTiltPreComp | read-create | current | Amount of fiber span tilt to pre compensate. May not equal to tnPowerMgmtPortFiberSpanTilt. Current configurable range: -300 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.28 | ColumntnPowerMgmtEgressInternodalPpcMaxInDownstream | read-only | current | Current range: -9900, -2000 to 0. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.29 | ColumntnPowerMgmtEgressInternodalSpanLossInDownstream | read-only | current | Current range: -9900, 0 to 4000. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.30 | ColumntnPowerMgmtEgressInternodalPpcMaxInDownstreamReference | read-only | current | Current range: -9900, -2000 to 0. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.31 | ColumntnPowerMgmtEgressInternodalSpanLossInDownstreamReference | read-only | current | Current range: -9900, 0 to 4000. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.32 | ColumntnPowerMgmtFiberSpanTiltPreCompL | read-create | current | Amount of fiber span tilt to pre compensate. May not equal to tnPowerMgmtPortFiberSpanTiltL for L Band. Current configurable range: -300 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.33 | ColumntnPowerMgmtEgressSRSTiltCalcMultiplierL | read-create | current | This is used to modify the calculated SRS tilt of the span for L Band. Current configurable range: 0 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.34 | ColumntnPowerMgmtEgressSRSTiltPreFractionL | read-create | current | This is used to modify the fraction of following span SRS tilt pre compensated for L Band. Current configurable range: 0 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.35 | ColumntnPowerMgmtEgressSRSTiltCalcACoeffL | read-create | current | Modeling coefficient for the SRSTilt = A*Pout(mW) equation for L Band. Current configurable range: 0 to 10000. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.36 | ColumntnPowerMgmtEgressSRSCF | read-create | current | This parameter should be applied immediately when changed. Applicable only to C+L systems. Corrects for SRS contribution between the C and L bands. Current con… |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.37 | ColumntnPowerMgmtEgressSRSCFL | read-create | current | This parameter should be applied immediately when changed. Applicable only to C+L systems. Corrects for SRS contribution between the C and L bands. Current con… |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.38 | ColumntnPowerMgmtEgressExternalOTAddLaunchAtten | read-create | current | Set the service launch attenuation offset for channels from external transponders added to the degree. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.39 | ColumntnPowerMgmtEgressSmoothing | read-create | current | Enable or disable power adjustment smoothing. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.5.1.40 | ColumntnPowerMgmtEgressSmoothingMaxStepSize | read-create | current | Set maximum step size for power adjustment smoothing. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.7 | TabletnPowerMgmtPortTable | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.7.1 | RowtnPowerMgmtPortEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.7.1.1 | ColumntnPowerMgmtPortIsCommissioned | read-create | current | Each external LD port whose power management mode setting is Automatic has a Power Management Commissioned Flag. When commissioning is completed these flags ar… |
| 1.3.6.1.4.1.7483.2.1.6.2.1.7.1.2 | ColumntnPowerMgmtPortTypeIn | read-create | current | The type of power management ingress. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.7.1.3 | ColumntnPowerMgmtPortTypeOut | read-create | current | The type of power management egress. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.7.1.6 | ColumntnPowerMgmtPortWTDecoderUsageTypeIn | read-create | current | The type of WTD used ingress. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.7.1.7 | ColumntnPowerMgmtPortWTDecoderUsageTypeOut | read-create | current | The type of WTD used egress. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.7.1.8 | ColumntnPowerMgmtPortGainAdjSchedBase | read-create | current | This is used to enter the base period past the hour for scheduled ingress adjustments. The unit is in 100s of ms. Value of -1 means not configured. Current con… |
| 1.3.6.1.4.1.7483.2.1.6.2.1.7.1.9 | ColumntnPowerMgmtPortGainAdjTimerPeriod | read-create | current | This is used to enter the timer length between enablements for the OMS section. The unit is in 100s of ms. Value of -1 means not configured. Current configurab… |
| 1.3.6.1.4.1.7483.2.1.6.2.1.7.1.10 | ColumntnPowerMgmtPortGainAdjTimerLength | read-create | current | This is used to enter the length of enablement time for the OMS section. The unit is in 100s of ms. Value of -1 means not configured. Current configurable rang… |
| 1.3.6.1.4.1.7483.2.1.6.2.1.7.1.11 | ColumntnPowerMgmtPortInGainAdjAutoEnabled | read-create | current | This is used to configure line behaviour: false - no auto adjusts, true - will enable adjustments, or do auto adjustments. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.7.1.12 | ColumntnPowerMgmtPortSRSTiltAdjAutoEnabled | read-create | current | If this value is true and line is OADM, controls updates of the channel set information used for SRS Adjustment. Value automatically updates at lines that pull… |
| 1.3.6.1.4.1.7483.2.1.6.2.1.7.1.13 | ColumntnPowerMgmtPortFiberSpanTilt | read-create | current | Linear fit of attenuation vs FREQ across defined channel min, max for tnPowerMgmtFiberSpanTiltPreComp. Current configurable range: -300 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.7.1.14 | ColumntnPowerMgmtPortSRSTiltMaintenanceMode | read-create | current | A line parameter that sets SCOT into a maintenance mode where the auto adjustment triggers are not sent, and the receiving lines do not respond to auto trigger… |
| 1.3.6.1.4.1.7483.2.1.6.2.1.7.1.15 | ColumntnPowerMgmtPortDegreeFunction | read-create | current | Used to store the function of the degree. Not used by power management system. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.7.1.16 | ColumntnPowerMgmtPortMaxChannels | read-create | current | Current configurable range: 4 to 88. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.7.1.17 | ColumntnPowerMgmtPortEgressAdjustForDownstreamEnabled | read-create | current | Current defaults: Iroadm Cards: 1 Other Cards: 2. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.7.1.18 | ColumntnPowerMgmtPortFiberSpanTiltL | read-create | current | Linear fit of attenuation vs FREQ across defined channel min, max for tnPowerMgmtFiberSpanTiltPreCompL for L Band. Current configurable range: -300 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.7.1.19 | ColumntnPowerMgmtPortWTDecoderUsageTypeInL | read-create | current | The type of WTD used ingress for L Band. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.7.1.20 | ColumntnPowerMgmtPortWTDecoderUsageTypeOutL | read-create | current | The type of WTD used egress for L Band. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.7.1.21 | ColumntnPowerMgmtPortIsCommissionedMethod | read-create | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.9 | TabletnPowerMgmtPowerOffsetInTable | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.9.1 | RowtnPowerMgmtPowerOffsetInEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.9.1.1 | ColumntnPowerMgmtBitRate | not-accessible | current | OTU Bit-Rate. Configurable range: 1 to 10000. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.9.1.2 | ColumntnPowerMgmtEncoding | not-accessible | current | Signal modulation format. Configurable range: 1 to 10000. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.9.1.3 | ColumntnPowerMgmtOffsetInPowerOffset | read-create | current | Optical power offset from nominal power level. Current configurable range: -600 to 600. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.10 | TabletnPowerMgmtPowerOffsetOutTable | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.10.1 | RowtnPowerMgmtPowerOffsetOutEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.10.1.1 | ColumntnPowerMgmtOffsetOutPowerOffset | read-create | current | Optical power offset from nominal power level. Current configurable range: -600 to 600. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.11 | TabletnPowerMgmtIngressPerChannelTable | not-accessible | current | The attributes in this table must not be set together with the same index in the same set request PDU. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.11.1 | RowtnPowerMgmtIngressPerChannelEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.11.1.1 | ColumntnPowerMgmtIngressPerChannelSystemTargetOffset | read-create | current | The SCOT system derived target power offset relative to common target power. Current configurable range: -300 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.11.1.2 | ColumntnPowerMgmtIngressPerChannelUserTargetOffset | read-create | current | The user configured target power offset relative to common target power. -9900 means not configured by user. Current configurable range: -9900, -300 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.11.1.3 | ColumntnPowerMgmtIngressPerChannelInUseTargetOffset | read-create | current | The target power offset relative to common target power currently in use. Current configurable range: -300 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.11.1.4 | ColumntnPowerMgmtIngressPerChannelTargetAbsolute | read-only | current | The SCOT target power in absolute power. Current range: -9900 to 1100. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.11.1.5 | ColumntnPowerMgmtIngressPerChannelApplicability | read-only | current | Values include: notApplicable - No Och XCo configured for this ITU applicable - Och XCo configured for this ITU. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.12 | TabletnPowerMgmtEgressPerChannelTable | not-accessible | current | The attributes in this table must not be set together with the same index in the same set request PDU. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.12.1 | RowtnPowerMgmtEgressPerChannelEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.12.1.1 | ColumntnPowerMgmtEgressPerChannelSystemTargetOffset | read-create | current | The SCOT system derived target power offset relative to common target power. Current configurable range: -300 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.12.1.2 | ColumntnPowerMgmtEgressPerChannelUserTargetOffset | read-create | current | The user configured target power offset relative to common target power. -9900 means not configured by user. Current configurable range: -9900, -300 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.12.1.3 | ColumntnPowerMgmtEgressPerChannelInUseTargetOffset | read-create | current | The target power offset relative to common target power currently in use. Current configurable range: -300 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.12.1.4 | ColumntnPowerMgmtEgressPerChannelTargetAbsolute | read-only | current | The SCOT target power in absolute power. -9900 means not configured by user. Current range: -9900, -2300 to 1100. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.12.1.5 | ColumntnPowerMgmtEgressPerChannelApplicability | read-only | current | Values include: notApplicable - No Och XCo configured for this ITU applicable - Och XCo configured for this ITU. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.13 | TabletnPowerMgmtTechnologyTypesTable | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.13.1 | RowtnPowerMgmtTechnologyTypesEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.13.1.1 | ColumntnPowerMgmtTechnologyTypesBitRateText | read-create | current | Text description of BitRate. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.13.1.2 | ColumntnPowerMgmtTechnologyTypesEncodingText | read-create | current | Text description of Encoding. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.13.1.3 | ColumntnPowerMgmtTechnologyTypesWtocmCalib | read-create | current | Optical power correction in mB from nominal power level for wtocm. Current configurable range: -500 to 500. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.13.1.4 | ColumntnPowerMgmtTechnologyTypesRowStatus | read-create | current | Row Status of power offset ingress entry. Supported values are: 1 - active 4 - createAndGo 6 - destroy. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.13.1.5 | ColumntnPowerMgmtTechnologyTypesOsnrCalib | read-create | current | OSNR correction in mB for different optical technology types. Current configurable range: -500 to 500. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.13.1.6 | ColumntnPowerMgmtTechnologyTypesWtocmaCalib | read-create | current | Optical power correction in mB from nominal power level for WTOCMA. Current configurable range: -500 to 500. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.13.1.7 | ColumntnPowerMgmtTechnologyTypesWtocmfCalib | read-create | current | Optical power correction in mB from nominal power level for WTOCMF. Current configurable range: -500 to 500. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.13.1.8 | ColumntnPowerMgmtTechnologyTypesWtocmfLCalib | read-create | current | Optical power correction in mB from nominal power level for WTOCMFL. Current configurable range: -500 to 500. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.13.1.9 | ColumntnPowerMgmtTechnologyTypesWtocmfCalib375 | read-create | current | Optical power correction in mB from nominal power level for WTOCMFL. Current configurable range: -500 to 500. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.13.1.10 | ColumntnPowerMgmtTechnologyTypesWtocmfLCalib375 | read-create | current | Optical power correction in mB from nominal power level for WTOCMFL. Current configurable range: -500 to 500. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.13.1.11 | ColumntnPowerMgmtTechnologyTypesMinXCWidthValue | read-only | current | Display the minimum required XC width vs techtype. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.14 | TabletnPowerMgmtAnyAddTable | not-accessible | current | This table provides access to add adjustment for A/D Block. The attributes in this table must not be set together with the same index 16 in the same set reques… |
| 1.3.6.1.4.1.7483.2.1.6.2.1.14.1 | RowtnPowerMgmtAnyAddEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.14.1.1 | ColumntnPowerMgmtAnyAddAdjustPowerGain | read-create | current | Run the Anydirection Add block adjustment. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.14.1.2 | ColumntnPowerMgmtAnyAddAdjustPowerGainLastResult | read-only | current | The result of the last executed Anydirection add block operation. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.14.1.3 | ColumntnPowerMgmtAnyAddAdjustPowerGainStatus | read-only | current | This attribute indicates the status of the executed Anydirection Add block operation. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.14.1.4 | ColumntnPowerMgmtAnyAddCommissioned | read-only | current | Indicates state of adjustment point. true = Adjusted successfully. false = NE event has caused the previous adjustment to be invalidated. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.14.1.5 | ColumntnPowerMgmtAnyAddPassed | read-only | current | Indicates the Anydirection Add block operation failed or passed. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.14.1.6 | ColumntnPowerMgmtAnyAddAmpIfIndex | read-only | current | Interface index of the LD in the add position of Anydirecton A/D block. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.14.1.7 | ColumntnPowerMgmtAnyAddAdjustPowerGainAbort | read-create | current | This attribute allows the network operator to submit an abort on the currently executing power optimization for the Anydirection Add adjustment. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.15 | TabletnPowerMgmtAnyDropTable | not-accessible | current | The attributes in this table must not be set together with the same index in the same set request PDU. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.15.1 | RowtnPowerMgmtAnyDropEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.15.1.1 | ColumntnPowerMgmtAnyDropAdjustPowerGain | read-create | current | Run the Anydirection Drop block adjustment. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.15.1.2 | ColumntnPowerMgmtAnyDropAdjustPowerGainLastResult | read-only | current | The result of the last executed Anydirection Drop block operation. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.15.1.3 | ColumntnPowerMgmtAnyDropAdjustPowerGainStatus | read-only | current | This attribute indicates the status of the executed Anydirection Drop block operation. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.15.1.4 | ColumntnPowerMgmtAnyDropCommissioned | read-only | current | Indicates state of adjustment point. true = Adjusted successfully. false = NE event has caused the previous adjustment to be invalidated. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.15.1.5 | ColumntnPowerMgmtAnyDropPassed | read-only | current | Indicates the anydirection Drop block operation failed or passed. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.15.1.6 | ColumntnPowerMgmtAnyDropAmpIfIndex | read-only | current | Interface index of the LD in the drop position of Anydirection A/D block. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.16 | ScalartnPowerMgmtIroadmAttributeTotal | read-only | current | Total number of attributes in tnPowerMgmtIroadmTable. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.17 | TabletnPowerMgmtIroadmTable | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.17.1 | RowtnPowerMgmtIroadmEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.17.1.1 | ColumntnPowerMgmtIroadmEgressOAMaxPpcOutFromInputs | read-only | current | Current Range: -1000 to 1000. Current defaults: IROADMF = -150 IROADMV = 50. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.17.1.2 | ColumntnPowerMgmtIroadmEgressOAPpcOut | read-only | current | Current Range: -1000 to 1000. Current defaults: IROADMF = -150 IROADMV = 50. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.18 | ScalartnPowerMgmtCapabilitiesCardAttributeTotal | read-only | current | Total number of attributes in tnPowerMgmtCapabilitiesCardTable. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.19 | TabletnPowerMgmtCapabilitiesCardTable | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.19.1 | RowtnPowerMgmtCapabilitiesCardEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.19.1.1 | ColumntnPowerMgmtCapabilitiesCardEgressPower | read-only | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.19.1.2 | ColumntnPowerMgmtCapabilitiesCardIngressPower | read-only | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.19.1.3 | ColumntnPowerMgmtCapabilitiesCardEgressTilt | read-only | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.19.1.4 | ColumntnPowerMgmtCapabilitiesCardIngressTilt | read-only | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.20 | TabletnPowerMgmtIngressPortTable | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.20.1 | RowtnPowerMgmtIngressPortEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.20.1.1 | ColumntnPowerMgmtIngressPortAdjustPowerGain | read-create | current | Value executeWithForce is no longer supported. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.20.1.2 | ColumntnPowerMgmtIngressPortAdjustPowerGainLastResult | read-only | current | The result of the last executed power gain adjustment operation. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.20.1.3 | ColumntnPowerMgmtIngressPortAdjustPowerGainStatus | read-only | current | This attribute indicates the status of the executed power gain adjustment operation. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.20.1.4 | ColumntnPowerMgmtIngressPortSRSTiltAdjStatus | read-only | current | Status of the tilt adjustment. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.20.1.5 | ColumntnPowerMgmtIngressPortSRSTiltAdjResult | read-only | current | Result string describing outcome of the tilt adjustment. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.20.1.6 | ColumntnPowerMgmtIngressPortSRSTiltPostFraction | read-create | current | Used to modify the fraction of upstream span SRS tilt post compensated. Current configurable range: 0 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.20.1.7 | ColumntnPowerMgmtIngressPortSRSTiltPostFractionL | read-create | current | Used to modify the fraction of upstream span SRS tilt post compensated for L Band. Current configurable range: 0 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.20.1.8 | ColumntnPowerMgmtIngressPortCommissioned | read-only | current | This attribute indicates if the ingress adjustment point has done a successful adjustment following being in an un-commissioned state. true - Adjusted successf… |
| 1.3.6.1.4.1.7483.2.1.6.2.1.20.1.9 | ColumntnPowerMgmtIngressPortPassed | read-only | current | Indicates the optimization adjustment failed or passed. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.20.1.10 | ColumntnPowerMgmtIngressPortGainSetOffset | read-create | current | Value added to result of gain adjustment calculation. Current configurable range: -300 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.20.1.11 | ColumntnPowerMgmtIngressPortGainSetOffsetL | read-create | current | Value added to result of gain adjustment calculation. Current configurable range: -300 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.20.1.12 | ColumntnPowerMgmtIngressPortAdjustPowerGainTargetGain | read-only | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.20.1.13 | ColumntnPowerMgmtIngressPortAdjustPowerGainTargetGainL | read-only | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.20.1.14 | ColumntnPowerMgmtIngressPortCommissionedGain | read-only | current | Gain value set while commissioning flag is false. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.20.1.15 | ColumntnPowerMgmtIngressPortCommissionedGainL | read-only | current | The EDFA gain value set when the line was adjusted while the degree commissioning flag was false. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.20.1.16 | ColumntnPowerMgmtIngressPortSRSTiltCalcOffset | read-only | current | Indicates if the LD setting has been offset to compensate downstream TiltMismatch. Range: -500 to 500. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.20.1.17 | ColumntnPowerMgmtIngressPortSRSTiltCalcOffsetL | read-only | current | Indicates if the LD setting has been offset to compensate downstream TiltMismatch. Range: -500 to 500. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21 | TabletnPowerMgmtEgressPortTable | not-accessible | current | The attributes in this table must not be set together with the same index in the same set request PDU. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1 | RowtnPowerMgmtEgressPortEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.1 | ColumntnPowerMgmtEgressPortAdjustPowerWithOptimization | read-create | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.2 | ColumntnPowerMgmtEgressPortAdjustPowerWithOptimizationAbort | read-create | current | This attribute allows the network operator to submit an abort on the currently executing power with optimization adjustment operation. When read back, the valu… |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.3 | ColumntnPowerMgmtEgressPortAdjustPowerWithOptimizationLastResult | read-only | current | The result of the last executed power adjustment with optimization operation. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.4 | ColumntnPowerMgmtEgressPortAdjustPowerWithOptimizationStatus | read-only | current | This attribute indicates the status of the executed power with optimization adjustment operation. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.5 | ColumntnPowerMgmtEgressPortSRSTiltCalcOutputLoss | read-create | current | Configurable loss from the egress Line Out to the fiber span input. Current configurable range: 0 to 1700. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.6 | ColumntnPowerMgmtEgressPortSRSTiltAdjStatus | read-only | current | Status of the tilt adjustment. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.7 | ColumntnPowerMgmtEgressPortSRSTIltAdjResult | read-only | current | Result string describing outcome of the tilt adjustment. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.8 | ColumntnPowerMgmtEgressPortSRSTiltCalcACoeff | read-create | current | Modeling coefficient for the SRSTilt = A*Pout(mW) equation. Current configurable range: 0 to 10000. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.9 | ColumntnPowerMgmtEgressPortSRSTiltCalcACoeffL | read-create | current | Modeling coefficient for the SRSTilt = A*Pout(mW) equation for L Band. Current configurable range: 0 to 10000. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.10 | ColumntnPowerMgmtEgressPortSRSTiltCalcMultiplier | read-create | current | This is used to modify the calculated SRS tilt of the span. Current configurable range: 0 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.11 | ColumntnPowerMgmtEgressPortSRSTiltCalcMultiplierL | read-create | current | This is used to modify the calculated SRS tilt of the span for L Band. Current configurable range: 0 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.12 | ColumntnPowerMgmtEgressPortFiberSpanTiltPreComp | read-create | current | Amount of fiber span tilt to pre compensate. May not equal to tnPowerMgmtPortFiberSpanTilt. Current configurable range: -300 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.13 | ColumntnPowerMgmtEgressPortFiberSpanTiltPreCompL | read-create | current | Amount of fiber span tilt to pre compensate. May not equal to tnPowerMgmtEgressPortFiberSpanTiltL for L Band. Current configurable range: -300 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.14 | ColumntnPowerMgmtEgressPortSRSCF | read-create | current | This parameter should be applied immediately when changed. Applicable only to C+L systems. Corrects for SRS contribution between the C and L bands. Current con… |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.15 | ColumntnPowerMgmtEgressPortSRSCFL | read-create | current | This parameter should be applied immediately when changed. Applicable only to C+L systems. Corrects for SRS contribution between the C and L bands. Current con… |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.16 | ColumntnPowerMgmtEgressPortSRSTiltPreFraction | read-create | current | This is used to modify the fraction of following span SRS tilt pre compensated. Current configurable range: 0 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.17 | ColumntnPowerMgmtEgressPortSRSTiltPreFractionL | read-create | current | This is used to modify the fraction of following span SRS tilt pre compensated for L Band. Current configurable range: 0 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.18 | ColumntnPowerMgmtEgressPortCommissioned | read-only | current | This attribute indicates if the egress adjustment point has done a successful adjustment following being in an un-commissioned state. true - Adjusted successfu… |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.19 | ColumntnPowerMgmtEgressPortPassed | read-only | current | Indicates the optimization adjust failed or passed. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.20 | ColumntnPowerMgmtEgressPortLHLaunchAtten | read-create | current | Added to the nominal attenuation lookup by WSS containing pack. Only applies to connectivity block in directionless architecture. Current configurable range: 0… |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.21 | ColumntnPowerMgmtEgressPortExternalOTAddLaunchAtten | read-create | current | Set the service launch attenuation offset for channels from external transponders added to the degree. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.22 | ColumntnPowerMgmtEgressPortSmoothing | read-create | current | Enable or disable power adjustment smoothing. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.21.1.23 | ColumntnPowerMgmtEgressPortSmoothingMaxStepSize | read-create | current | Set maximum step size for power adjustment smoothing. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.22 | TabletnPowerMgmtIngressPortPerChannelTable | not-accessible | current | The attributes in this table must not be set together with the same index in the same set request PDU. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.22.1 | RowtnPowerMgmtIngressPortPerChannelEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.22.1.1 | ColumntnPowerMgmtIngressPortPerChannelSystemTargetOffset | read-create | current | The SCOT system derived target power offset relative to common target power. Current configurable range: -300 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.22.1.2 | ColumntnPowerMgmtIngressPortPerChannelUserTargetOffset | read-create | current | The user configured target power offset relative to common target power. -9900 means not configured by user. Current configurable range: -9900, -300 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.22.1.3 | ColumntnPowerMgmtIngressPortPerChannelInUseTargetOffset | read-create | current | The target power offset relative to common target power currently in use. Current configurable range: -300 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.22.1.4 | ColumntnPowerMgmtIngressPortPerChannelTargetAbsolute | read-only | current | The SCOT target power in absolute power. Current range: -9900 to 1100. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.22.1.5 | ColumntnPowerMgmtIngressPortPerChannelApplicability | read-only | current | Values include: notApplicable - No Och XCo configured for this ITU applicable - Och XCo configured for this ITU. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.23 | TabletnPowerMgmtEgressPortPerChannelTable | not-accessible | current | The attributes in this table must not be set together with the same index in the same set request PDU. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.23.1 | RowtnPowerMgmtEgressPortPerChannelEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.23.1.1 | ColumntnPowerMgmtEgressPortPerChannelSystemTargetOffset | read-create | current | The SCOT system derived target power offset relative to common target power. Current configurable range: -300 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.23.1.2 | ColumntnPowerMgmtEgressPortPerChannelUserTargetOffset | read-create | current | The user configured target power offset relative to common target power. -9900 means not configured by user. Current configurable range: -9900, -300 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.23.1.3 | ColumntnPowerMgmtEgressPortPerChannelInUseTargetOffset | read-create | current | The target power offset relative to common target power currently in use. Current configurable range: -300 to 300. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.23.1.4 | ColumntnPowerMgmtEgressPortPerChannelTargetAbsolute | read-only | current | The SCOT target power in absolute power. -9900 means not configured by user. Current range: -9900, -2300 to 1100. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.23.1.5 | ColumntnPowerMgmtEgressPortPerChannelApplicability | read-only | current | Values include: notApplicable - No Och XCo configured for this ITU applicable - Och XCo configured for this ITU. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.24 | ScalartnPowerMgmtCapabilitiesPortAttributeTotal | read-only | current | Total number of attributes in tnPowerMgmtCapabilitiesPortTable. |
| 1.3.6.1.4.1.7483.2.1.6.2.1.25 | TabletnPowerMgmtCapabilitiesPortTable | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.25.1 | RowtnPowerMgmtCapabilitiesPortEntry | not-accessible | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.25.1.1 | ColumntnPowerMgmtCapabilitiesPortEgressPower | read-only | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.25.1.2 | ColumntnPowerMgmtCapabilitiesPortIngressPower | read-only | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.25.1.3 | ColumntnPowerMgmtCapabilitiesPortEgressTilt | read-only | current | . |
| 1.3.6.1.4.1.7483.2.1.6.2.1.25.1.4 | ColumntnPowerMgmtCapabilitiesPortIngressTilt | read-only | current | . |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AluWdmPowerMgmtSRSTiltAdjStatus | INTEGER { completed(1), inProgress(2), notInProgress(3) } | current | The status of the tilt adjustment. |
| AluWdmWTDecoderUsageType | INTEGER { wtdPpcOnAlmOn(1), wtdPpcOffAlmOff(2), wtdPpcOnAlmOff(3), wtocm(4), wtdInferred(5), wtocmAd(6), maint(7) } | current | Specify where and how power per channel measurements and channel alarms are managed. |
| TropicPowerMgmtCapabilitiesCard | INTEGER { none (1), runadjustgetstatusresul (2), configandrunadjustgetstatusresult (3), getstatusresult (4) } | current | Multiple amplifier degrees. |
| TropicPowerMgmtPercentCompleted | Unsigned32 | current | The percent complete of the executed power management operation. |
| TropicPowerMgmtResult | SnmpAdminString (SIZE(0..255)) | current | The result of the executed power management operation. |
| TropicPowerMgmtStatus | INTEGER { completed(1), inProgress(2) } | current | The status of the executed power management operation. |
| TropicPowerMgmtType | INTEGER { auto(1), manual(2) } | current | The type of power management. |