UBNT-AFLTU-MIB
75 objects
The AFLTU MIB module for Ubiquiti Networks, Inc. entities
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress |
| UBNT-MIB | ubntAFLTU ubntAFLTUGroups |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.41112.1.2.9.1 | NodeafLTUCompliances | |||
| 1.3.6.1.4.1.41112.1.2.9.2 | NodeafLTUGroups | |||
| 1.3.6.1.4.1.41112.1.2.9.2.1 | GroupubntAFLTUStatusGroup | current | Status and statistics for AirFiberLTU monitoring | |
| 1.3.6.1.4.1.41112.1.2.9.2.2 | ComplianceubntAFLTUStatusCompliance | current | The compliance statement for Ubiquiti AirFiberLTU entities. | |
| 1.3.6.1.4.1.41112.1.10.1 | IdentityafLTUMIB | The AFLTU MIB module for Ubiquiti Networks, Inc. entities | ||
| 1.3.6.1.4.1.41112.1.10.1.2 | NodeafLTUConfig | |||
| 1.3.6.1.4.1.41112.1.10.1.2.1 | ScalarafLTURole | read-write | current | Wireless Role (ap/cpe) |
| 1.3.6.1.4.1.41112.1.10.1.2.2 | ScalarafLTUFrequency | read-write | current | The main frequency to use in MHz. |
| 1.3.6.1.4.1.41112.1.10.1.2.3 | ScalarafLTUAltFreqList | read-write | current | The list of alternative frequencies in MHz. Multiple frequencies should be separated with commas. For example: '5250,5670,5800'. |
| 1.3.6.1.4.1.41112.1.10.1.2.4 | ScalarafLTUBandwidth | read-write | current | Wireless channel bandwidth in MHz. |
| 1.3.6.1.4.1.41112.1.10.1.2.5 | ScalarafLTUSsid | read-write | current | Radio SSID |
| 1.3.6.1.4.1.41112.1.10.1.2.6 | ScalarafLTUTxEIRP | read-write | current | Tx EIRP in dBm. |
| 1.3.6.1.4.1.41112.1.10.1.2.7 | ScalarafLTUAntennaGain | read-write | current | Antenna gain in dBi. |
| 1.3.6.1.4.1.41112.1.10.1.2.8 | ScalarafLTUCableLoss | read-write | current | Cable loss in dB. |
| 1.3.6.1.4.1.41112.1.10.1.2.9 | ScalarafLTUTxRate | read-write | current | Tx modulation. |
| 1.3.6.1.4.1.41112.1.10.1.2.10 | ScalarafLTUTxRateAuto | read-write | current | Automatic Tx moduleation selection. If this is enabled, afLTUTxRate is the maximum modulation for the selection algorithm to select. |
| 1.3.6.1.4.1.41112.1.10.1.2.11 | ScalarafLTUDistanceScale | read-write | current | Distance Scale, options are: 0 = 0km 1 = <1km 2 = <5km 3 = <10km 4 = <20km 5 = <40km |
| 1.3.6.1.4.1.41112.1.10.1.3 | NodeafLTUStatus | |||
| 1.3.6.1.4.1.41112.1.10.1.3.1 | ScalarafLTUMac | read-only | current | The MAC address of this device |
| 1.3.6.1.4.1.41112.1.10.1.3.2 | ScalarafLTUDevModel | read-only | current | The device model. |
| 1.3.6.1.4.1.41112.1.10.1.3.3 | ScalarafLTUDevName | read-only | current | The device name. |
| 1.3.6.1.4.1.41112.1.10.1.3.4 | ScalarafLTUFirmwareVersion | read-only | current | The firmware version running. |
| 1.3.6.1.4.1.41112.1.10.1.3.5 | ScalarafLTUMemoryUsage | read-only | current | The percentage of total memory usage. |
| 1.3.6.1.4.1.41112.1.10.1.3.6 | ScalarafLTUCpuUsage | read-only | current | The percentage of total CPU usage. |
| 1.3.6.1.4.1.41112.1.10.1.3.7 | ScalarafLTUUptime | read-only | current | The uptime of the device in seconds. |
| 1.3.6.1.4.1.41112.1.10.1.4 | TableafLTUStationTable | not-accessible | current | Remote station table for status and statistics. |
| 1.3.6.1.4.1.41112.1.10.1.4.1 | RowafLTUStationEntry | not-accessible | current | An entry in the afLTUStationTable |
| 1.3.6.1.4.1.41112.1.10.1.4.1.1 | ColumnafLTUStaTxRate | read-write | current | Current select Tx modulation |
| 1.3.6.1.4.1.41112.1.10.1.4.1.2 | ColumnafLTUStaRxRate | read-write | current | Current select Rx modulation |
| 1.3.6.1.4.1.41112.1.10.1.4.1.3 | ColumnafLTUStaTxCapacity | read-only | current | Transmit Capacity. |
| 1.3.6.1.4.1.41112.1.10.1.4.1.4 | ColumnafLTUStaRxCapacity | read-only | current | Receive Capacity. |
| 1.3.6.1.4.1.41112.1.10.1.4.1.5 | ColumnafLTUStaRxPower0 | read-only | current | Measured receive chain0 strength in dBm |
| 1.3.6.1.4.1.41112.1.10.1.4.1.6 | ColumnafLTUStaRxPower1 | read-only | current | Measured receive chain1 strength in dBm |
| 1.3.6.1.4.1.41112.1.10.1.4.1.7 | ColumnafLTUStaIdealRxPower0 | read-only | current | The ideal chain0 receive power in dBm. |
| 1.3.6.1.4.1.41112.1.10.1.4.1.8 | ColumnafLTUStaIdealRxPower1 | read-only | current | The ideal chain1 receive power in dBm. |
| 1.3.6.1.4.1.41112.1.10.1.4.1.9 | ColumnafLTUStaRxPowerLevel0 | read-only | current | Measuared receive chain0 strength in % measured. 100% means that the measured received power is equal to the ideal power. -1 means that we are not able to get … |
| 1.3.6.1.4.1.41112.1.10.1.4.1.10 | ColumnafLTUStaRxPowerLevel1 | read-only | current | Mresuared receive chain1 strength in %. 100% means that the measured received power is equal to the ideal power. -1 means that we are not able to get the infor… |
| 1.3.6.1.4.1.41112.1.10.1.4.1.11 | ColumnafLTUStaRemoteMac | not-accessible | current | The MAC address of the remote station |
| 1.3.6.1.4.1.41112.1.10.1.4.1.12 | ColumnafLTUStaRemoteDevModel | read-only | current | The device model of the remote station |
| 1.3.6.1.4.1.41112.1.10.1.4.1.13 | ColumnafLTUStaRemoteDevName | read-only | current | The device name of the remote station. |
| 1.3.6.1.4.1.41112.1.10.1.4.1.14 | ColumnafLTUStaRemoteFirmwareVersion | read-only | current | The firmware version of the remote station. |
| 1.3.6.1.4.1.41112.1.10.1.4.1.15 | ColumnafLTUStaRemoteTxEIRP | read-only | current | Remote Station transmit signal strength in dBm. |
| 1.3.6.1.4.1.41112.1.10.1.4.1.16 | ColumnafLTUStaRemoteRxPower0 | read-only | current | Measured receive chain0 strength in dBm at remote |
| 1.3.6.1.4.1.41112.1.10.1.4.1.17 | ColumnafLTUStaRemoteRxPower1 | read-only | current | Measured receive chain1 strength in dBm at remote |
| 1.3.6.1.4.1.41112.1.10.1.4.1.18 | ColumnafLTUStaRemoteIdealRxPower0 | read-only | current | The ideal chain0 receive power in dBm at remote. |
| 1.3.6.1.4.1.41112.1.10.1.4.1.19 | ColumnafLTUStaRemoteIdealRxPower1 | read-only | current | The ideal chain1 receive power in dBm at remote. |
| 1.3.6.1.4.1.41112.1.10.1.4.1.20 | ColumnafLTUStaRemoteRxPowerLevel0 | read-only | current | Remoate measuared receive chain0 strength in % measured. 100% means that the measured received power is equal to the ideal power. -1 means that we are not able… |
| 1.3.6.1.4.1.41112.1.10.1.4.1.21 | ColumnafLTUStaRemoteRxPowerLevel1 | read-only | current | Remoate measuared receive chain1 strength in % measured. 100% means that the measured received power is equal to the ideal power. -1 means that we are not able… |
| 1.3.6.1.4.1.41112.1.10.1.4.1.22 | ColumnafLTUStaRemoteLatency | read-only | current | Remote Station latency in milliseconds. |
| 1.3.6.1.4.1.41112.1.10.1.4.1.23 | ColumnafLTUStaRemoteDistance | read-only | current | Remote Station distance in kilometers. |
| 1.3.6.1.4.1.41112.1.10.1.4.1.24 | ColumnafLTUStaRemoteConnectionTime | read-only | current | Remote Station connection time of current session. |
| 1.3.6.1.4.1.41112.1.10.1.4.1.25 | ColumnafLTUStaRemoteLastIp | read-only | current | Remote Station last known IP address. |
| 1.3.6.1.4.1.41112.1.10.1.4.1.26 | ColumnafLTUStaRemoteRegistrationAttempts | read-only | current | Remote Station registration attempts. |
| 1.3.6.1.4.1.41112.1.10.1.5 | NodeafLTUStats | |||
| 1.3.6.1.4.1.41112.1.10.1.5.1 | ScalarafLTUTxBytes | read-only | current | Total tx bytes. |
| 1.3.6.1.4.1.41112.1.10.1.5.2 | ScalarafLTUTxPps | read-only | current | packet per second for tx. |
| 1.3.6.1.4.1.41112.1.10.1.5.3 | ScalarafLTURxBytes | read-only | current | Total tx bytes. |
| 1.3.6.1.4.1.41112.1.10.1.5.4 | ScalarafLTURxPps | read-only | current | packet per second for rx. |
| 1.3.6.1.4.1.41112.1.10.1.5.5 | ScalarafLTUConnected | read-only | current | Radio connected |
| 1.3.6.1.4.1.41112.1.10.1.6 | NodeafLTUethStats | |||
| 1.3.6.1.4.1.41112.1.10.1.6.1 | ScalarafLTUethTxBytes | read-only | current | Total tx bytes. |
| 1.3.6.1.4.1.41112.1.10.1.6.2 | ScalarafLTUethTxPps | read-only | current | packet per second for tx. |
| 1.3.6.1.4.1.41112.1.10.1.6.3 | ScalarafLTUethRxBytes | read-only | current | Total tx bytes. |
| 1.3.6.1.4.1.41112.1.10.1.6.4 | ScalarafLTUethRxPps | read-only | current | packet per second for rx. |
| 1.3.6.1.4.1.41112.1.10.1.6.5 | ScalarafLTUethConnected | read-only | current | Ethernet Data port plugged |
| 1.3.6.1.4.1.41112.1.10.1.7 | NodeafLTUgpsStats | |||
| 1.3.6.1.4.1.41112.1.10.1.7.1 | ScalarafLTUgpsStatus | read-only | current | GPS status |
| 1.3.6.1.4.1.41112.1.10.1.7.2 | ScalarafLTUgpsDimensions | read-only | current | GPS Fix Obtained |
| 1.3.6.1.4.1.41112.1.10.1.7.3 | ScalarafLTUgpsLat | read-only | current | GPS Latitude |
| 1.3.6.1.4.1.41112.1.10.1.7.4 | ScalarafLTUgpsLon | read-only | current | GPS Longitude |
| 1.3.6.1.4.1.41112.1.10.1.7.5 | ScalarafLTUgpsAltMeter | read-only | current | GPS Altitude (m) |
| 1.3.6.1.4.1.41112.1.10.1.7.6 | ScalarafLTUgpsAltFeet | read-only | current | GPS Altitude (ft) |
| 1.3.6.1.4.1.41112.1.10.1.7.7 | ScalarafLTUgpsSatsVisible | read-only | current | GPS Satellites Visible |
| 1.3.6.1.4.1.41112.1.10.1.7.8 | ScalarafLTUgpsSatsTracked | read-only | current | GPS Satellites Tracked |
| 1.3.6.1.4.1.41112.1.10.1.7.9 | ScalarafLTUgpsHDOP | read-only | current | GPS Horizontal Dilution of Precision |