UX-OBJECTS-MIB
116 objects
The MIB module for net.com entities.
Imported Objects
| DS0-MIB MISSING | dsx0ConfigEntry |
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount PerfTotalCount |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.177 | Nodenet | |||
| 1.3.6.1.4.1.177.15 | Identityux | The MIB module for net.com entities. | ||
| 1.3.6.1.4.1.177.15.1 | NodeuxObjects | |||
| 1.3.6.1.4.1.177.15.1.1 | NodeuxChassis | |||
| 1.3.6.1.4.1.177.15.1.1.1 | ScalarchasiDescUX2000 | read-only | deprecated | The description for the UX2000 chassis type |
| 1.3.6.1.4.1.177.15.1.1.2 | ScalarchasiDescUX1000 | read-only | deprecated | The description for the UX1000 chassis type |
| 1.3.6.1.4.1.177.15.1.1.3 | ScalarchasiType | read-only | current | The chassis type for the system. |
| 1.3.6.1.4.1.177.15.1.2 | TableuxAlarmCfgTable | not-accessible | current | This table gives the information about the alarms and events that this device is capable of generating. When a condition satisfying the alarms configured in th… |
| 1.3.6.1.4.1.177.15.1.2.1 | RowuxAlarmCfgEntry | not-accessible | current | An entry in the alarm table |
| 1.3.6.1.4.1.177.15.1.2.1.1 | ColumnuxAlarmIndex | read-only | current | Index of this alarm/event in the config table. This will be the combination of uxAlarmID and uxAlarmSubID uxAlarmIndex =uxAlarmID *65536+ uxAlarmSubID |
| 1.3.6.1.4.1.177.15.1.2.1.2 | ColumnuxAlarmID | read-only | current | Event ID of this alarm/event. |
| 1.3.6.1.4.1.177.15.1.2.1.3 | ColumnuxAlarmSubID | read-only | current | Event SubID of this alarm/event. |
| 1.3.6.1.4.1.177.15.1.2.1.4 | ColumnuxAlarmCondition | read-only | current | Alarm/event name. |
| 1.3.6.1.4.1.177.15.1.2.1.5 | ColumnuxAlarmSeverity | read-only | current | Alarm severity level. Eg: none warning minor major critical |
| 1.3.6.1.4.1.177.15.1.2.1.6 | ColumnuxAlarmCategory | read-only | current | Alarm/event category number. As per Bell Core Standard GR-1248-CORE |
| 1.3.6.1.4.1.177.15.1.2.1.7 | ColumnuxAlarmCancelType | read-only | current | When an alarm is configured as auto-cancel(1), it clears from the UX active alarm table, when the condition causing it goes away. These alarms do not need expl… |
| 1.3.6.1.4.1.177.15.1.2.1.8 | ColumnuxAlarmEvtType | read-only | current | Type of the evnt, whether it is an alarm or a normal event |
| 1.3.6.1.4.1.177.15.1.2.1.9 | ColumnuxAlarmDecodeKey | read-only | current | Decode key that is used to interpret alarm/event instances when the alarms are posted to active alarm Table. The index attribute uxAlarmInstanceID is decoded b… |
| 1.3.6.1.4.1.177.15.1.2.1.10 | ColumnuxAlarmClrID | read-only | current | Clearing event Event ID of this alarm. Applicable to the alarms for which the auto clear is set |
| 1.3.6.1.4.1.177.15.1.2.1.11 | ColumnuxAlarmClrSubID | read-only | current | Clearing event Event sub ID of this alarm. Applicable to the alarms for which the auto clear is set. |
| 1.3.6.1.4.1.177.15.1.2.1.12 | ColumnuxAlarmDescription | read-only | current | Alarm description. Any info user wants to note |
| 1.3.6.1.4.1.177.15.1.3 | TableuxActAlarmTable | not-accessible | current | Active Alarm table in the system |
| 1.3.6.1.4.1.177.15.1.3.1 | RowuxActAlarmEntry | not-accessible | current | An entry in the active alarm table |
| 1.3.6.1.4.1.177.15.1.3.1.1 | ColumnuxAlarmActiveIndex | read-only | current | Index of Active alarm table |
| 1.3.6.1.4.1.177.15.1.3.1.2 | ColumnuxAlarmConfigIndex | read-only | current | Index value of Alarm configuration number |
| 1.3.6.1.4.1.177.15.1.3.1.3 | ColumnuxAlarmActiveID | read-only | current | EventID of the active alarm |
| 1.3.6.1.4.1.177.15.1.3.1.4 | ColumnuxAlarmActiveSubID | read-only | current | EventID of the active alarm |
| 1.3.6.1.4.1.177.15.1.3.1.5 | ColumnuxAlarmActiveCondition | read-only | current | Active alarm/event name. |
| 1.3.6.1.4.1.177.15.1.3.1.6 | ColumnuxAlarmActiveSeverity | read-only | current | Alarm severity level. Eg: none warning minor major critical |
| 1.3.6.1.4.1.177.15.1.3.1.7 | ColumnuxAlarmActiveCategory | read-only | current | Alarm/event category number. As per Bell Core Standard GR-1248-CORE |
| 1.3.6.1.4.1.177.15.1.3.1.8 | ColumnuxAlarmActiveCancelType | read-only | current | When an alarm is configured as auto-cancel(1), it clears from the UX active alarm table, when the condition causing it goes away. These alarms do not need expl… |
| 1.3.6.1.4.1.177.15.1.3.1.9 | ColumnuxAlarmActiveFirstOccur | read-only | current | Alarm first occurrence Time displayed in milli sec. |
| 1.3.6.1.4.1.177.15.1.3.1.10 | ColumnuxAlarmActiveLastOccur | read-only | current | Alarm last occurrence Time displayed in milli sec. |
| 1.3.6.1.4.1.177.15.1.3.1.11 | ColumnuxAlarmActiveCount | read-only | current | Number of times this alert occurred. This count is relevant only for non-auto-cancelling alerts. |
| 1.3.6.1.4.1.177.15.1.3.1.12 | ColumnuxAlarmActiveDecodeKey | read-only | current | Decode key that is used to interpret alarm/event instances when the alarms are posted to active alarm Table. The index attribute uxAlarmInstanceID is decoded b… |
| 1.3.6.1.4.1.177.15.1.3.1.13 | ColumnuxAlarmActiveSourceInstance | read-only | current | Instance that has generated this alert. This is encoded as illustrated in the following example : decode key = shelf;card;port Source instance = 1;1;1 indicate… |
| 1.3.6.1.4.1.177.15.1.3.1.14 | ColumnuxAlarmActiveState | read-only | current | Informs if an active alarm is acknowledged/unacknowledged/cancelled. |
| 1.3.6.1.4.1.177.15.1.3.1.15 | ColumnuxAlarmActiveClrEvtID | read-only | current | Clearing event Event ID of this alarm. Applicable to the alarms for which the auto clear is set |
| 1.3.6.1.4.1.177.15.1.3.1.16 | ColumnuxAlarmActiveClrEvtSubID | read-only | current | Clearing event Event sub ID of this alarm. Applicable to the alarms for which the auto clear is set. |
| 1.3.6.1.4.1.177.15.1.3.1.17 | ColumnuxAlarmActiveDescription | read-only | current | Alarm description. Any info user wants to note |
| 1.3.6.1.4.1.177.15.1.3.1.18 | ColumnuxAlarmActiveHighestSeverityAlarm | read-only | current | Highest Severity Active alarm |
| 1.3.6.1.4.1.177.15.1.3.1.19 | ColumnuxAlarmActiveHardWareID | read-only | current | Hardware ID of the node |
| 1.3.6.1.4.1.177.15.1.5 | NodeipTelephony | |||
| 1.3.6.1.4.1.177.15.1.5.9 | TableuxSystemUsageStatsIntervalTable | not-accessible | current | The System Usage Interval table contains various system usage statitics collected over the previous 4 hours.The past 4 hours are broken into 240 completed 1 mi… |
| 1.3.6.1.4.1.177.15.1.5.9.1 | RowuxSystemUsageIntervalEntry | not-accessible | current | An entry in the System Usage Interval table |
| 1.3.6.1.4.1.177.15.1.5.9.1.1 | ColumnuxSystemUsageIntervalNumber | read-only | current | A number between 1 and 240, where 1 is the most recently completed 1 minute interval and 240 is the 1 minute interval completed 239 minutes prior to interval 1. |
| 1.3.6.1.4.1.177.15.1.5.9.1.2 | ColumnuxSystemUsageIntervalCPUUsage | read-only | current | CPU Usage statistics for 1 minute interval. |
| 1.3.6.1.4.1.177.15.1.5.9.1.3 | ColumnuxSystemUsageIntervalMemoryUsage | read-only | current | Memory Usage statistics for 1 minute interval. |
| 1.3.6.1.4.1.177.15.1.5.14 | TableuxDSPPeakUsageStatsIntervalTable | not-accessible | current | The DSP Usage Stats table contains various statistics being collected by DSP for the previous 24 hours. The past 24 hours are broken into 24 completed 1 hour i… |
| 1.3.6.1.4.1.177.15.1.5.14.1 | RowuxDSPPeakUsageIntervalEntry | not-accessible | current | An entry in the System Usage Current table |
| 1.3.6.1.4.1.177.15.1.5.14.1.1 | ColumnuxDSPPeakUsageIntervalIndex | read-only | current | The Index value which identifies the interval. |
| 1.3.6.1.4.1.177.15.1.5.14.1.2 | ColumnuxDSPPeakIntervalUsage | read-only | current | Peak DSP usage. |
| 1.3.6.1.4.1.177.15.1.6 | TableuxDSPResourceTable | not-accessible | current | This table gives the information about the DSP resources in UX. |
| 1.3.6.1.4.1.177.15.1.6.1 | RowuxDSPResourceEntry | not-accessible | current | An entry in the DSP resource table |
| 1.3.6.1.4.1.177.15.1.6.1.1 | ColumnuxDSPIndex | read-only | current | DSP Resource table index |
| 1.3.6.1.4.1.177.15.1.6.1.2 | ColumnuxDSPModType | read-only | current | DSP module type |
| 1.3.6.1.4.1.177.15.1.6.1.3 | ColumnuxDSPIsPresent | read-only | current | If the DSP resource is present. This is because we list all the possible DSP resources through this table and this object specifies if the DSP resource is actu… |
| 1.3.6.1.4.1.177.15.1.6.1.4 | ColumnuxDSPCPUUsage | read-only | current | DSP Resource usage in % rounded of to the next integer. |
| 1.3.6.1.4.1.177.15.1.6.1.5 | ColumnuxDSPChannelsInUse | read-only | current | Number of channels in use by this DSP |
| 1.3.6.1.4.1.177.15.1.6.1.6 | ColumnuxDSPServiceStatus | read-only | current | Service state of the DSP |
| 1.3.6.1.4.1.177.15.1.6.1.7 | ColumnuxCodecsSupported | read-only | current | Codecs supported by this DSP, displayed as a '|' seperated string |
| 1.3.6.1.4.1.177.15.1.7 | TableuxDSX0ConfigTable | not-accessible | current | The DS0 Configuration table. |
| 1.3.6.1.4.1.177.15.1.7.1 | RowuxDSX0ConfigEntry | not-accessible | current | An entry in the DS0 Configuration table. There is an entry in this table for each DS0 interface. |
| 1.3.6.1.4.1.177.15.1.7.1.1 | ColumnuxDSX0Type | read-only | current | Type of DS0 |
| 1.3.6.1.4.1.177.15.1.7.1.2 | ColumnuxDSX0Speed | read-only | current | Speed of DS0 |
| 1.3.6.1.4.1.177.15.1.7.1.3 | ColumnuxDSX0Lastchange | read-only | current | Last change of status on this DS0 in EPOCH secs |
| 1.3.6.1.4.1.177.15.1.7.1.4 | ColumnuxDSX0AdminState | read-only | current | Admin state of this DS0 |
| 1.3.6.1.4.1.177.15.1.8 | TableuxModuleTable | not-accessible | current | This table gives the information about all the installed Modules in UX. |
| 1.3.6.1.4.1.177.15.1.8.1 | RowuxModuleEntry | not-accessible | current | An entry in the Module table |
| 1.3.6.1.4.1.177.15.1.8.1.1 | ColumnuxModuleIndex | read-only | current | Index of the Module. It also represents the physical location of the card/module on the system. NOTE: For different UX Chassis, the index of modules/cards may … |
| 1.3.6.1.4.1.177.15.1.8.1.2 | ColumnuxModuleType | read-only | current | Module type indicating the physical module type. Integer values 7, 8, 9, 10, 15 - reserved for future modules. |
| 1.3.6.1.4.1.177.15.1.8.1.3 | ColumnuxModulePartNumber | read-only | current | Module part information Example: 404-40001 |
| 1.3.6.1.4.1.177.15.1.8.1.4 | ColumnuxModuleVersionNumber | read-only | current | Module version information Example: 001 |
| 1.3.6.1.4.1.177.15.1.8.1.5 | ColumnuxModuleSerialNumber | read-only | current | Module serial number information Example: A4000110040059 |
| 1.3.6.1.4.1.177.15.1.8.1.6 | ColumnuxModuleMfgWeek | read-only | current | Module manufacturing week number NOTE: This object is not applicable for uxModuleType of PowerSupply type. For PowerSupply Modules, 0 will be returned. |
| 1.3.6.1.4.1.177.15.1.8.1.7 | ColumnuxModuleMfgYear | read-only | current | Module manufacturing year number NOTE: This object is not applicable for uxModuleType of PowerSupply type. For PowerSupply Modules, 0 will be returned. |
| 1.3.6.1.4.1.177.15.1.9 | TableuxPSUTable | not-accessible | current | This table provides health and runtime information on all Power Supplies on UX. This table returns all applicable power supply slots. NOTE: THIS MIB IS NOT SUP… |
| 1.3.6.1.4.1.177.15.1.9.1 | RowuxPSUEntry | not-accessible | current | An entry in the PSU table |
| 1.3.6.1.4.1.177.15.1.9.1.1 | ColumnuxPSUIndex | read-only | current | Index of the Power Supply. NOTE: UX2000: Index 1, is the left PSU Index 2, is the right PSU |
| 1.3.6.1.4.1.177.15.1.9.1.2 | ColumnuxPSUIsPresent | read-only | current | Provides indication if the power supply is present on the device. |
| 1.3.6.1.4.1.177.15.1.9.1.3 | ColumnuxPSUIsInputGood | read-only | current | Provides status of PSU Input health. This could be used to deduce the health state of the Power Supply as following: uxPSUIsPresent(1) and yes(1) - Power Suppl… |
| 1.3.6.1.4.1.177.15.1.9.1.4 | ColumnuxPSUInputType | read-only | current | Provides the type of PSU Input i.e. AC or DC |
| 1.3.6.1.4.1.177.15.1.9.1.5 | ColumnuxPSUPowerIn | read-only | current | Provides Power (W) coming into the supply |
| 1.3.6.1.4.1.177.15.1.9.1.6 | ColumnuxPSUPowerOut | read-only | current | Provides Power (W) going out from the supply |
| 1.3.6.1.4.1.177.15.1.9.1.7 | ColumnuxPSUVoltageIn | read-only | current | Provides Voltage coming into the supply |
| 1.3.6.1.4.1.177.15.1.9.1.8 | ColumnuxPSUVoltageOut | read-only | current | Provides Voltage going out from the supply This information is returned in 1000s of the unit value |
| 1.3.6.1.4.1.177.15.1.9.1.9 | ColumnuxPSUCurrentIn | read-only | current | Provides Current (A) coming into the supply This information is returned in 1000s of the unit value |
| 1.3.6.1.4.1.177.15.1.9.1.10 | ColumnuxPSUCurrentOut | read-only | current | Provides Current (A) going out from the supply This information is returned in 1000s of the unit value |
| 1.3.6.1.4.1.177.15.1.9.1.11 | ColumnuxPSUTemperature | read-only | current | Provides temperature (C) of the supply |
| 1.3.6.1.4.1.177.15.1.9.1.12 | ColumnuxPSUFanSpeed1 | read-only | current | Provides speed (RPM) of the Fan 1 of the supply |
| 1.3.6.1.4.1.177.15.1.9.1.13 | ColumnuxPSUFanSpeed2 | read-only | current | Provides speed (RPM) of the Fan 2 of the supply |
| 1.3.6.1.4.1.177.15.1.10 | TableuxFanTable | not-accessible | current | This table gives the information about all the installed Fans on UX. NOTE: THIS MIB IS NOT SUPPORTED FOR UX1000 MODEL |
| 1.3.6.1.4.1.177.15.1.10.1 | RowuxFanEntry | not-accessible | current | An entry in the Fan table |
| 1.3.6.1.4.1.177.15.1.10.1.1 | ColumnuxFanIndex | read-only | current | Index of the installed Fan. |
| 1.3.6.1.4.1.177.15.1.10.1.2 | ColumnuxFanSpeed | read-only | current | Speed (RPM) of the Fan Note: Fan can be considered Down if the speed is 0 |
| 1.3.6.1.4.1.177.15.1.11 | TableuxCardTable | not-accessible | current | This table gives information about all the installed Cards on UX. NOTE: THIS MIB IS NOT SUPPORTED FOR UX1000 MODEL |
| 1.3.6.1.4.1.177.15.1.11.1 | RowuxCardEntry | not-accessible | current | An entry in the Card table |
| 1.3.6.1.4.1.177.15.1.11.1.1 | ColumnuxCardIndex | read-only | current | Index of the installed Card. |
| 1.3.6.1.4.1.177.15.1.11.1.2 | ColumnuxCardType | read-only | current | Card type indicating the physical card type. Integer values 5 to 16 do not indicate a physical card type. |
| 1.3.6.1.4.1.177.15.1.11.1.3 | ColumnuxCardServiceStatus | read-only | current | Operational status of the installed card. Note: This attribute is not applicable for cards/modules on UX1000 hardware. |
| 1.3.6.1.4.1.177.15.1.12 | NodeuxSystem | |||
| 1.3.6.1.4.1.177.15.1.12.1 | ScalaruxSystemHighestSeverityAlarm | read-only | current | Provides highest severity of all active alarms in the system. |
| 1.3.6.1.4.1.177.15.1.12.2 | ScalaruxSystemCoreSwitchTemp | read-only | current | Provides core switch temperature (C). |
| 1.3.6.1.4.1.177.15.1.12.3 | ScalaruxSystemCurrentCPUUsage | read-only | current | Provides CPU Usage statistics for the current interval. |
| 1.3.6.1.4.1.177.15.1.12.4 | ScalaruxSystemCurrentMemoryUsage | read-only | current | Provides Memory Usage statistics for the current interval. |
| 1.3.6.1.4.1.177.15.1.12.5 | ScalaruxLicenseCurrentPeakSIPCall | read-only | current | Peak value of used SIP call licenses for the current 1 hour interval. |
| 1.3.6.1.4.1.177.15.1.12.6 | ScalaruxLicenseCurrentPeakSIPRegistration | read-only | current | Peak value of used SIP Registrations licenses for the current interval. |
| 1.3.6.1.4.1.177.15.1.12.7 | ScalaruxDSPPeakCurrentUsage | read-only | current | Peak DSP usage for the current 1 hour interval. |
| 1.3.6.1.4.1.177.15.1.12.8 | ScalaruxLicenseCurrentPeakTDMChannel | read-only | current | Peak value of used TDM channel licenses. |
| 1.3.6.1.4.1.177.15.1.12.9 | ScalaruxLicenseCurrentPeakDSP | read-only | current | Peak value of used DSP licenses. |
| 1.3.6.1.4.1.177.15.1.12.10 | ScalaruxUserStatsPeakSessionsCurrentInerval | read-only | current | Provides peak number of user sessions in the current interval. |
| 1.3.6.1.4.1.177.15.1.12.11 | TableuxUserStatsIntervalTable | not-accessible | current | Provides peak number of user sessions for the specified interval. |
| 1.3.6.1.4.1.177.15.1.12.11.1 | RowuxUserStatsIntervalEntry | not-accessible | current | An entry in the user statistics interval table. |
| 1.3.6.1.4.1.177.15.1.12.11.1.1 | ColumnuxUserStatsIntervalNumber | read-only | current | A number between 1 and 24, where 1 is the most recently completed 1 hour interval and 24 is the 1 hour interval completed 23 hours and 45 minutes prior to inte… |
| 1.3.6.1.4.1.177.15.1.12.11.1.2 | ColumnuxUserStatsPeakSessions | read-only | current | Peak user sessions during the requested interval. |
| 1.3.6.1.4.1.177.15.2 | NodeuxTraps |