VELOCITY-MIB
64 objects
This MIB is an extension of the host MIB. This MIB currently only runs on linux. This is the original version.
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Gauge32 Integer32 mib-2 MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | AutonomousType DateAndTime DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.15601 | Nodevelocity | |||
| 1.3.6.1.4.1.15601.1 | NodevelocitySystem | |||
| 1.3.6.1.4.1.15601.1.1 | ScalarvelocitySystemUptime | read-only | current | The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime… |
| 1.3.6.1.4.1.15601.1.2 | ScalarvelocitySystemDate | read-write | current | The host's notion of the local date and time of day. |
| 1.3.6.1.4.1.15601.1.3 | ScalarvelocitySystemInitialLoadDevice | read-write | current | The index of the velocityDeviceEntry for the device from which this host is configured to load its initial operating system configuration (i.e., which operatin… |
| 1.3.6.1.4.1.15601.1.4 | ScalarvelocitySystemInitialLoadParameters | read-write | current | This object contains the parameters (e.g. a pathname and parameter) supplied to the load device when requesting the initial operating system configuration from… |
| 1.3.6.1.4.1.15601.1.5 | ScalarvelocitySystemNumUsers | read-only | current | The number of user sessions for which this host is storing state information. A session is a collection of processes requiring a single act of user authenticat… |
| 1.3.6.1.4.1.15601.1.6 | ScalarvelocitySystemProcesses | read-only | current | The number of process contexts currently loaded or running on this system. |
| 1.3.6.1.4.1.15601.1.7 | ScalarvelocitySystemMaxProcesses | read-only | current | The maximum number of process contexts this system can support. If there is no fixed maximum, the value should be zero. On systems that have a fixed maximum, t… |
| 1.3.6.1.4.1.15601.1.8 | ScalarvelocitySystemPageIn | read-only | current | Total number of pages that the system paged in |
| 1.3.6.1.4.1.15601.1.9 | ScalarvelocitySystemPageOut | read-only | current | Total number of pages that the system paged out |
| 1.3.6.1.4.1.15601.1.10 | ScalarvelocitySystemSwapIn | read-only | current | Total number of swap pages that have been brought in |
| 1.3.6.1.4.1.15601.1.11 | ScalarvelocitySystemSwapOut | read-only | current | Total number of swap pages that have been swapped out |
| 1.3.6.1.4.1.15601.1.12 | ScalarvelocitySystemInterupts | read-only | current | Total number of interupts since system boot |
| 1.3.6.1.4.1.15601.1.13 | ScalarvelocitySystemContext | read-only | current | Total number of context switches the system had done. |
| 1.3.6.1.4.1.15601.1.14 | ScalarvelocitySystemProcessTotal | read-only | current | Total number of processes the system has started since boot. |
| 1.3.6.1.4.1.15601.4 | NodevelocitySWRun | |||
| 1.3.6.1.4.1.15601.4.1 | ScalarvelocitySWOSIndex | read-only | current | The value of the velocitySWRunIndex for the velocitySWRunEntry that represents the primary operating system running on this velocity. This object is useful for… |
| 1.3.6.1.4.1.15601.4.2 | TablevelocitySWRunTable | not-accessible | current | The (conceptual) table of software running on the velocity. |
| 1.3.6.1.4.1.15601.4.2.1 | RowvelocitySWRunEntry | not-accessible | current | A (conceptual) entry for one piece of software running on the velocity Note that because the installed software table only contains information for software st… |
| 1.3.6.1.4.1.15601.4.2.1.1 | ColumnvelocitySWRunIndex | read-only | current | A unique value for each piece of software running on the velocity. Wherever possible, this should be the system's native, unique identification number. |
| 1.3.6.1.4.1.15601.4.2.1.2 | ColumnvelocitySWRunName | read-only | current | A textual description of this running piece of software, including the manufacturer, revision, and the name by which it is commonly known. If this software was… |
| 1.3.6.1.4.1.15601.4.2.1.3 | ColumnvelocitySWRunID | read-only | current | The product ID of this running piece of software. |
| 1.3.6.1.4.1.15601.4.2.1.4 | ColumnvelocitySWRunPath | read-only | current | A description of the location on long-term storage (e.g. a disk drive) from which this software was loaded. |
| 1.3.6.1.4.1.15601.4.2.1.5 | ColumnvelocitySWRunParameters | read-only | current | A description of the parameters supplied to this software when it was initially loaded. |
| 1.3.6.1.4.1.15601.4.2.1.6 | ColumnvelocitySWRunType | read-only | current | The type of this software. |
| 1.3.6.1.4.1.15601.4.2.1.7 | ColumnvelocitySWRunStatus | read-write | current | The status of this running piece of software. Setting this value to invalid(4) shall cause this software to stop running and to be unloaded. Sets to other valu… |
| 1.3.6.1.4.1.15601.4.2.1.8 | ColumnvelocitySWRunPPID | read-only | current | The ID of the parent process. |
| 1.3.6.1.4.1.15601.4.2.1.9 | ColumnvelocitySWRunPGRP | read-only | current | The ID of the process group that the process belongs to. |
| 1.3.6.1.4.1.15601.5 | NodevelocitySWRunPerf | |||
| 1.3.6.1.4.1.15601.5.1 | TablevelocitySWRunPerfTable | not-accessible | current | The (conceptual) table of running software performance metrics. |
| 1.3.6.1.4.1.15601.5.1.1 | RowvelocitySWRunPerfEntry | not-accessible | current | A (conceptual) entry containing software performance metrics. As an example, an instance of the velocitySWRunPerfCPU object might be named velocitySWRunPerfCPU… |
| 1.3.6.1.4.1.15601.5.1.1.1 | ColumnvelocitySWRunPerfCPUUser | read-only | current | The number of centi-seconds of the User's CPU resources consumed by this process. Note that on a multi-processor system, this value may increment by more than … |
| 1.3.6.1.4.1.15601.5.1.1.2 | ColumnvelocitySWRunPerfCPUSys | read-only | current | The number of centi-seconds of the system's CPU resources consumed by this process. Note that on a multi-processor system, this value may increment by more tha… |
| 1.3.6.1.4.1.15601.5.1.1.3 | ColumnvelocitySWRunPerfMem | read-only | current | The total amount of real system memory allocated to this process. |
| 1.3.6.1.4.1.15601.5.1.1.4 | ColumnvelocitySWRunPerfCPUCummUser | read-only | current | The number of cummulative centi-seconds of the total user's CPU resources consumed by this process. Note that on a multi-processor system, this value may incre… |
| 1.3.6.1.4.1.15601.5.1.1.5 | ColumnvelocitySWRunPerfCPUCummSys | read-only | current | The number of cummulative centi-seconds of the total system's CPU resources consumed by this process. Note that on a multi-processor system, this value may inc… |
| 1.3.6.1.4.1.15601.5.1.1.6 | ColumnvelocitySWRunPerfMinFault | read-only | current | The number of minor page faults. (Those that have not required loading a page from disk.) |
| 1.3.6.1.4.1.15601.5.1.1.7 | ColumnvelocitySWRunPerfMajFault | read-only | current | The number of major page faults. (Those that have required loading a page from disk.) |
| 1.3.6.1.4.1.15601.5.1.1.8 | ColumnvelocitySWRunPerfMinFaultCumm | read-only | current | The number of minor page faults for this process and its children. (Those that have not required loading a page from disk.) |
| 1.3.6.1.4.1.15601.5.1.1.9 | ColumnvelocitySWRunPerfMajFaultCumm | read-only | current | The number of major page faults. for this process and its children. (Those that have required loading a page from disk.) |
| 1.3.6.1.4.1.15601.5.1.1.10 | ColumnvelocitySWRunPerfRss | read-only | current | The number of pages in real memory minus 3 for administrative purposes. This is just the pages which count towards text, data, or stack space. This does not in… |
| 1.3.6.1.4.1.15601.5.1.1.11 | ColumnvelocitySWRunPerfPrio | read-only | current | The standard nice value, plus fifteen. The value is never negative in the kernel. |
| 1.3.6.1.4.1.15601.5.1.1.12 | ColumnvelocitySWRunPerfAll | read-only | current | The complete information from the stat file for the given process |
| 1.3.6.1.4.1.15601.5.1.1.13 | ColumnvelocitySWRunPerfUID | read-only | current | The owning user ID and group ID of this process. |
| 1.3.6.1.4.1.15601.5.1.1.14 | ColumnvelocitySWRunPerfUName | read-only | current | The name of the owning user ID and group of this process. |
| 1.3.6.1.4.1.15601.6 | TablevelocityAppTable | not-accessible | current | A table containing a list of applications that are of special interest. The process table is searched for the given string that identifies the given process(s)… |
| 1.3.6.1.4.1.15601.6.1 | RowvelocityAppEntry | not-accessible | current | An entry containing an application and its statistics. |
| 1.3.6.1.4.1.15601.6.1.1 | ColumnvelocityAppIndex | read-only | current | Reference Index for each observed application. |
| 1.3.6.1.4.1.15601.6.1.2 | ColumnvelocityAppNames | read-only | current | The application name we're counting/checking on. |
| 1.3.6.1.4.1.15601.6.1.3 | ColumnvelocityAppPid | read-only | current | The absolute location of the PID file for the application. |
| 1.3.6.1.4.1.15601.6.1.4 | ColumnvelocityAppMin | read-only | current | The minimum number of processes for that applicationes that should be running. An error flag is generated if the number of running processes is < the minimum. |
| 1.3.6.1.4.1.15601.6.1.5 | ColumnvelocityAppMax | read-only | current | The maximum number of processes for that application that should be running. An error flag is generated if the number of running processes is > the maximum. |
| 1.3.6.1.4.1.15601.6.1.6 | ColumnvelocityAppCount | read-only | current | The number of current applications running with the name in question. |
| 1.3.6.1.4.1.15601.6.1.7 | ColumnvelocityAppIds | read-only | current | The list of process Ids that match the Application name. |
| 1.3.6.1.4.1.15601.6.1.100 | ColumnvelocityAppErrorFlag | read-only | current | A Error flag to indicate trouble with a application. It goes to 1 if there is an error, 0 if no error. |
| 1.3.6.1.4.1.15601.6.1.101 | ColumnvelocityAppErrMessage | read-only | current | An error message describing the problem (if one exists). |
| 1.3.6.1.4.1.15601.7 | NodevelocityMIBAdminInfo | |||
| 1.3.6.1.4.1.15601.7.1 | IdentityvelocityMibModule | This MIB is an extension of the host MIB. This MIB currently only runs on linux. This is the original version. | ||
| 1.3.6.1.4.1.15601.7.2 | NodevelocityMIBCompliances | |||
| 1.3.6.1.4.1.15601.7.3 | NodevelocityMIBGroups | |||
| 1.3.6.1.4.1.15601.7.3.1 | GroupvelocitySystemGroup | current | The Velocity System Group. | |
| 1.3.6.1.4.1.15601.7.3.4 | GroupvelocitySWRunGroup | current | The Velocity Resources Running Software Group. | |
| 1.3.6.1.4.1.15601.7.3.5 | GroupvelocitySWRunPerfGroup | current | The Velocity Resources Running Software Performance Group. |