VIPRINET-MIB
88 objects
This MIB complements the ViprinetMIB.
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.35424 | Identityviprinet | This MIB complements the ViprinetMIB. | ||
| 1.3.6.1.4.1.35424.1 | NodevpnRouter | |||
| 1.3.6.1.4.1.35424.1.1 | NodevpnRouterInfo | |||
| 1.3.6.1.4.1.35424.1.1.1 | ScalarvpnRouterName | read-only | current | A short descriptive name of the router. |
| 1.3.6.1.4.1.35424.1.1.2 | ScalarvpnRouterSerial | read-only | current | Serial number of this router. |
| 1.3.6.1.4.1.35424.1.1.3 | ScalarvpnRouterModel | read-only | current | Router Model |
| 1.3.6.1.4.1.35424.1.1.4 | ScalarvpnRouterFirmware | read-only | current | Firmware Version currently running on this router. |
| 1.3.6.1.4.1.35424.1.1.5 | ScalarvpnRouterMode | read-only | current | Current mode that the router is running in. Possible values are: 0 - Node 1 - Hub 2 - Hub running as HotSpare 3 - Hotspare-Hub replacing another router |
| 1.3.6.1.4.1.35424.1.1.6 | ScalarvpnRouteruptime | read-only | current | Elapsed time since the router has booted. |
| 1.3.6.1.4.1.35424.1.1.7 | ScalarvpnRouterFirmwareStatus | read-only | current | Current Status of the Update System. Possible values are: 0 - Idle / No new firmware available 1 - Updates Available 2 - Checking for Updates 3 - Downloading U… |
| 1.3.6.1.4.1.35424.1.2 | NodevpnRouterHealth | |||
| 1.3.6.1.4.1.35424.1.2.1 | ScalarvpnRouterCPULoad | read-only | current | Load average on this router |
| 1.3.6.1.4.1.35424.1.2.2 | ScalarvpnRouterMemoryUsage | read-only | current | Current total memory usage (in KByte). |
| 1.3.6.1.4.1.35424.1.2.3 | ScalarvpnRouterSystemTemperature | read-only | current | Current system temperature (in degree Celsius). |
| 1.3.6.1.4.1.35424.1.2.4 | ScalarvpnRouterCPUTemperature | read-only | current | Current CPU temperature (in degree Celsius) |
| 1.3.6.1.4.1.35424.1.2.5 | ScalarvpnRouterPowerSupplyFailure | read-only | current | Information about the PSU Possible Values are: 0 = no failure 1 = a single PSU is out of order |
| 1.3.6.1.4.1.35424.1.3 | NodevpnRouterFans | |||
| 1.3.6.1.4.1.35424.1.3.1 | ScalarvpnRouterFanCount | read-only | current | Number of Fans. |
| 1.3.6.1.4.1.35424.1.3.2 | TablevpnRouterFanTable | not-accessible | current | The table holding information to each fan. |
| 1.3.6.1.4.1.35424.1.3.2.1 | RowvpnRouterFanEntry | not-accessible | current | The entry associated with each fan. |
| 1.3.6.1.4.1.35424.1.3.2.1.1 | ColumnvpnRouterFanIndex | not-accessible | current | ID-Number of the fan |
| 1.3.6.1.4.1.35424.1.3.2.1.2 | ColumnvpnRouterFanAdminStatus | read-only | current | Desired state of this Fan Possible Values: 0 = off 1 = on |
| 1.3.6.1.4.1.35424.1.3.2.1.3 | ColumnvpnRouterFanOperativeStatus | read-only | current | Operative status of this fan 0 = Disabled 1 = OK 2 = Faulty |
| 1.3.6.1.4.1.35424.1.3.2.1.4 | ColumnvpnRouterFanRPM | read-only | current | Current RPM of this fan. Note that not all models supply this info. |
| 1.3.6.1.4.1.35424.1.4 | NodevpnRouterInterfaces | |||
| 1.3.6.1.4.1.35424.1.4.1 | ScalarvpnRouterInterfaceCount | read-only | current | Number of Interfaces. |
| 1.3.6.1.4.1.35424.1.4.2 | TablevpnRouterInterfaceTable | not-accessible | current | The table holding information to each interface. |
| 1.3.6.1.4.1.35424.1.4.2.1 | RowvpnRouterInterfaceEntry | not-accessible | current | The entry associated with each interface. |
| 1.3.6.1.4.1.35424.1.4.2.1.1 | ColumnvpnRouterInterfaceIndex | not-accessible | current | ID-Number of the interface. |
| 1.3.6.1.4.1.35424.1.4.2.1.2 | ColumnvpnRouterInterfaceName | read-only | current | A short descriptive name of the interface |
| 1.3.6.1.4.1.35424.1.4.2.1.3 | ColumnvpnRouterInterfaceAdminStatus | read-only | current | Desired state of the interface. possible values: 0 = disconnected, 1 = connected |
| 1.3.6.1.4.1.35424.1.4.2.1.4 | ColumnvpnRouterInterfaceOperativeStatus | read-only | current | Current state of the interface. possible values: 0 = disconnected, 1 = connected, 2 = connecting, 3 = disconnecting |
| 1.3.6.1.4.1.35424.1.4.2.1.5 | ColumnvpnRouterInterfaceBandwidthToWan | read-only | current | Theoretical maximum upstream (in KBit). Might be illusional. |
| 1.3.6.1.4.1.35424.1.4.2.1.6 | ColumnvpnRouterInterfaceBandwidthFromWan | read-only | current | Theoretical maximum downstream (in KBit). |
| 1.3.6.1.4.1.35424.1.4.2.1.7 | ColumnvpnRouterInterfaceTrafficUp | read-only | current | Total upstream traffic made (in Byte) since router boot. |
| 1.3.6.1.4.1.35424.1.4.2.1.8 | ColumnvpnRouterInterfaceTrafficDown | read-only | current | Total downstream traffic made (in Byte) since router boot. |
| 1.3.6.1.4.1.35424.1.4.2.1.9 | ColumnvpnRouterInterfaceSignalStrength | read-only | current | Signal Strength (in percent). |
| 1.3.6.1.4.1.35424.1.4.2.1.10 | ColumnvpnRouterInterfaceServiceType | read-only | current | Interface Service Type. |
| 1.3.6.1.4.1.35424.1.4.2.1.11 | ColumnvpnRouterInterfaceServiceStatus | read-only | current | Service Status. |
| 1.3.6.1.4.1.35424.1.4.2.1.12 | ColumnvpnRouterInterfaceRoaming | read-only | current | Interface Roaming. possible values: 0 = off, 1 = on |
| 1.3.6.1.4.1.35424.1.4.2.1.13 | ColumnvpnRouterInterfaceNetworkName | read-only | current | Interface Network Name. |
| 1.3.6.1.4.1.35424.1.4.2.1.14 | ColumnvpnRouterInterfaceBandInfo | read-only | current | Interface Band Info. |
| 1.3.6.1.4.1.35424.1.4.2.1.15 | ColumnvpnRouterInterfaceIMSI | read-only | current | Interface IMSI. |
| 1.3.6.1.4.1.35424.1.4.2.1.16 | ColumnvpnRouterInterfaceIMEI | read-only | current | Interface IMEI. |
| 1.3.6.1.4.1.35424.1.4.2.1.17 | ColumnvpnRouterInterfacePINStatus | read-only | current | Interface PIN Status. |
| 1.3.6.1.4.1.35424.1.4.2.1.18 | ColumnvpnRouterInterfaceRFBand | read-only | current | Interface RF Band. |
| 1.3.6.1.4.1.35424.1.4.2.1.19 | ColumnvpnRouterInterfaceRFChannel | read-only | current | Interface RF Channel. |
| 1.3.6.1.4.1.35424.1.4.2.1.20 | ColumnvpnRouterInterfaceSyncrateUpstream | read-only | current | Interface Syncrate Upstream. |
| 1.3.6.1.4.1.35424.1.4.2.1.21 | ColumnvpnRouterInterfaceSyncrateDownstream | read-only | current | Interface Syncrate Downstream. |
| 1.3.6.1.4.1.35424.1.5 | NodevpnRouterTunnels | |||
| 1.3.6.1.4.1.35424.1.5.1 | ScalarvpnRouterTunnelCount | read-only | current | Number of Tunnels. |
| 1.3.6.1.4.1.35424.1.5.2 | TablevpnRouterTunnelTable | not-accessible | current | The table holding information to each tunnel. |
| 1.3.6.1.4.1.35424.1.5.2.1 | RowvpnRouterTunnelEntry | not-accessible | current | The entry associated with each tunnel. |
| 1.3.6.1.4.1.35424.1.5.2.1.1 | ColumnvpnRouterTunnelIndex | not-accessible | current | ID-Number of the tunnel. |
| 1.3.6.1.4.1.35424.1.5.2.1.2 | ColumnvpnRouterTunnelName | read-only | current | Name of VPN tunnel |
| 1.3.6.1.4.1.35424.1.5.2.1.3 | ColumnvpnRouterTunnelAdminStatus | read-only | current | Desired state of the tunnel. possible values: 0 = disconnected, 1 = connected |
| 1.3.6.1.4.1.35424.1.5.2.1.4 | ColumnvpnRouterTunnelOperativeStatus | read-only | current | Current state of the tunnel. possible values: 0 = disconnected, 1 = connected |
| 1.3.6.1.4.1.35424.1.5.2.1.5 | ColumnvpnRouterTunnelCumulatedBandwidthToWan | read-only | current | Theoretical maximum cumulated downstream (in KBit), considering all active channels. |
| 1.3.6.1.4.1.35424.1.5.2.1.6 | ColumnvpnRouterTunnelCumulatedBandwidthFromWan | read-only | current | Theoretical maximum cumulated upstream (in KBit), considering all active channels. |
| 1.3.6.1.4.1.35424.1.5.2.1.7 | ColumnvpnRouterTunnelCurrentCumulatedBandwidthToWan | read-only | current | Current cumulated upstream (in KBit). |
| 1.3.6.1.4.1.35424.1.5.2.1.8 | ColumnvpnRouterTunnelCurrentCumulatedBandwidthFromWan | read-only | current | Current cumulated downstream (in KBit). |
| 1.3.6.1.4.1.35424.1.5.2.1.9 | ColumnvpnRouterTunnelTrafficUp | read-only | current | Total upstream traffic made (in Byte) since router boot. |
| 1.3.6.1.4.1.35424.1.5.2.1.10 | ColumnvpnRouterTunnelTrafficDown | read-only | current | Total downstream traffic made (in Byte) since router boot. |
| 1.3.6.1.4.1.35424.1.5.2.1.11 | ColumnvpnRouterTunnelRemoteRouterSerial | read-only | current | Serial of the remote router. |
| 1.3.6.1.4.1.35424.1.6 | NodevpnRouterTunnelChannels | |||
| 1.3.6.1.4.1.35424.1.6.1 | ScalarvpnRouterTunnelChannelCount | read-only | current | Number of TunnelChannel. |
| 1.3.6.1.4.1.35424.1.6.2 | TablevpnRouterTunnelChannelTable | not-accessible | current | The table holding information to each tunnelchannel. |
| 1.3.6.1.4.1.35424.1.6.2.1 | RowvpnRouterTunnelChannelEntry | not-accessible | current | The entry associated with each tunnelchannel. |
| 1.3.6.1.4.1.35424.1.6.2.1.1 | ColumnvpnRouterTunnelChannelIndex | not-accessible | current | ID-Number of the tunnelchannel. |
| 1.3.6.1.4.1.35424.1.6.2.1.2 | ColumnvpnRouterTunnelChannelName | read-only | current | Name of tunnelchannel. It will be in the form tunnel.tunnelname |
| 1.3.6.1.4.1.35424.1.6.2.1.3 | ColumnvpnRouterTunnelChannelAdminStatus | read-only | current | Desired state of the tunnelchannel. possible values: 0 = disconnected, 1 = connected |
| 1.3.6.1.4.1.35424.1.6.2.1.4 | ColumnvpnRouterTunnelChannelOperativeStatus | read-only | current | Current state of the tunnelchannel. possible values: 0 = disconnected, 1 = connected, 2 = connecting, 3 = disconnecting, 4 = connectedpingtest, 5 = connectedpi… |
| 1.3.6.1.4.1.35424.1.6.2.1.5 | ColumnvpnRouterTunnelChannelMaxBandwidthToWan | read-only | current | Maximum possible bandwidth to WAN (in KBit/sec). |
| 1.3.6.1.4.1.35424.1.6.2.1.6 | ColumnvpnRouterTunnelChannelMaxBandwidthFromWan | read-only | current | Maximum possible bandwidth from WAN (in KBit/sec). |
| 1.3.6.1.4.1.35424.1.6.2.1.7 | ColumnvpnRouterTunnelChannelCurrentBandwidthToWan | read-only | current | Current bandwidth to WAN (in KBit/sec). |
| 1.3.6.1.4.1.35424.1.6.2.1.8 | ColumnvpnRouterTunnelChannelCurrentBandwidthFromWan | read-only | current | Current bandwidth from WAN (in KBit/sec). |
| 1.3.6.1.4.1.35424.1.6.2.1.9 | ColumnvpnRouterTunnelChannelTrafficUp | read-only | current | Total upstream traffic made (in Byte) since router boot. |
| 1.3.6.1.4.1.35424.1.6.2.1.10 | ColumnvpnRouterTunnelChannelTrafficDown | read-only | current | Total downstream traffic made (in Byte) since router boot. |
| 1.3.6.1.4.1.35424.1.6.2.1.11 | ColumnvpnRouterTunnelChannelReferencedTunnel | read-only | current | The OID of the tunnel that this channel is referencing to. |
| 1.3.6.1.4.1.35424.1.6.2.1.12 | ColumnvpnRouterTunnelChannelIsBackup | read-only | current | Is this channel configured as fallback? Possible Values: 0 = no, 1 = yes |
| 1.3.6.1.4.1.35424.1.6.2.1.13 | ColumnvpnRouterTunnelChannelModuleSlot | read-only | current | Module that the channel is using. Possible Values: 0 = Hub WAN-Interface, 1 = Module in Slot 1, 2 = Module in Slot 2, 3 = Module in Slot 3, 4 = Module in Slot … |
| 1.3.6.1.4.1.35424.1.6.2.1.14 | ColumnvpnRouterTunnelChannelPacketLoss | read-only | current | Overall packetloss experienced (in %) on the channel-connection. |
| 1.3.6.1.4.1.35424.1.6.2.1.15 | ColumnvpnRouterTunnelChannelLinkStability | read-only | current | Estimated Link Stability (in %) of the channel-connection. |
| 1.3.6.1.4.1.35424.1.7 | NodevpnRouterConformance | |||
| 1.3.6.1.4.1.35424.1.7.1 | NodevpnRouterGroups | |||
| 1.3.6.1.4.1.35424.1.7.1.1 | GroupvpnRouterObjects | current | The Objects of the vpnRouter. | |
| 1.3.6.1.4.1.35424.1.7.2 | NodevpnRouterCompliances | |||
| 1.3.6.1.4.1.35424.1.7.2.1 | CompliancevpnRouterReadOnlyCompliance | current | When this MIB is implemented without support for read- create (i.e., in read-only mode), the implementation can claim read-only compliance. |