VRRPV3-MIB
56 objects
This MIB describes objects used for managing Virtual Router Redundancy Protocol version 3 (VRRPv3). Copyright (c) 2012 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). This version of the MIB module is part of RFC 6527. Please see the RFC for full legal notices.
Imported Objects
| IF-MIB | -- RFC2580 ifIndex |
| INET-ADDRESS-MIB | -- RFC2863 InetAddressType InetAddress |
| SNMPv2-CONF | -- RFC2579 MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | -- RFC2578 TEXTUAL-CONVENTION MacAddress RowStatus TimeInterval TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.207 | Identityvrrpv3MIB | This MIB describes objects used for managing Virtual Router Redundancy Protocol version 3 (VRRPv3). Copyright (c) 2012 IETF Trust and the persons identified as… | ||
| 1.3.6.1.2.1.207.0 | Nodevrrpv3Notifications | |||
| 1.3.6.1.2.1.207.0.1 | Notificationvrrpv3NewMaster | current | The newMaster notification indicates that the sending agent has transitioned to master state. | |
| 1.3.6.1.2.1.207.0.2 | Notificationvrrpv3ProtoError | current | The notification indicates that the sending agent has encountered the protocol error indicated by vrrpv3StatisticsProtoErrReason. | |
| 1.3.6.1.2.1.207.1 | Nodevrrpv3Objects | |||
| 1.3.6.1.2.1.207.1.1 | Nodevrrpv3Operations | |||
| 1.3.6.1.2.1.207.1.1.1 | Tablevrrpv3OperationsTable | not-accessible | current | Unified Operations table for a VRRP router that consists of a sequence (i.e., one or more conceptual rows) of 'vrrpv3OperationsEntry' items each of which descr… |
| 1.3.6.1.2.1.207.1.1.1.1 | Rowvrrpv3OperationsEntry | not-accessible | current | An entry in the vrrpv3OperationsTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified by… |
| 1.3.6.1.2.1.207.1.1.1.1.1 | Columnvrrpv3OperationsVrId | not-accessible | current | This object contains the Virtual Router Identifier (VRID). |
| 1.3.6.1.2.1.207.1.1.1.1.2 | Columnvrrpv3OperationsInetAddrType | not-accessible | current | The IP address type of Vrrpv3OperationsEntry and Vrrpv3AssociatedIpAddrEntry. This value determines the type for vrrpv3OperationsMasterIpAddr, vrrpv3Operations… |
| 1.3.6.1.2.1.207.1.1.1.1.3 | Columnvrrpv3OperationsMasterIpAddr | read-only | current | The master router's real IP address. The master router would set this address to vrrpv3OperationsPrimaryIpAddr while transitioning to master state. For backup … |
| 1.3.6.1.2.1.207.1.1.1.1.4 | Columnvrrpv3OperationsPrimaryIpAddr | read-create | current | In the case where there is more than one IP Address (associated IP addresses) for a given 'ifIndex', this object is used to specify the IP address that will be… |
| 1.3.6.1.2.1.207.1.1.1.1.5 | Columnvrrpv3OperationsVirtualMacAddr | read-only | current | The virtual MAC address of the virtual router. Although this object can be derived from the 'vrrpv3OperationsVrId' object, it is defined so that it is easily o… |
| 1.3.6.1.2.1.207.1.1.1.1.6 | Columnvrrpv3OperationsStatus | read-only | current | The current state of the virtual router. This object has three defined values: - 'initialize', which indicates that the virtual router is waiting for a startup… |
| 1.3.6.1.2.1.207.1.1.1.1.7 | Columnvrrpv3OperationsPriority | read-create | current | This object specifies the priority to be used for the virtual router master election process; higher values imply higher priority. A priority of '0', although … |
| 1.3.6.1.2.1.207.1.1.1.1.8 | Columnvrrpv3OperationsAddrCount | read-only | current | The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpv3AssociatedAddrTable that corre… |
| 1.3.6.1.2.1.207.1.1.1.1.9 | Columnvrrpv3OperationsAdvInterval | read-create | current | The time interval, in centiseconds, between sending advertisement messages. Only the master router sends VRRP advertisements. |
| 1.3.6.1.2.1.207.1.1.1.1.10 | Columnvrrpv3OperationsPreemptMode | read-create | current | Controls whether a higher priority virtual router will preempt a lower priority master. |
| 1.3.6.1.2.1.207.1.1.1.1.11 | Columnvrrpv3OperationsAcceptMode | read-create | current | Controls whether a virtual router in master state will accept packets addressed to the address owner's IPv6 address as its own if it is not the IPv6 address ow… |
| 1.3.6.1.2.1.207.1.1.1.1.12 | Columnvrrpv3OperationsUpTime | read-only | current | This value represents the amount of time, in TimeTicks (hundredth of a second), since this virtual router (i.e., the 'vrrpv3OperationsStatus') transitioned out… |
| 1.3.6.1.2.1.207.1.1.1.1.13 | Columnvrrpv3OperationsRowStatus | read-create | current | The RowStatus variable should be used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets … |
| 1.3.6.1.2.1.207.1.1.2 | Tablevrrpv3AssociatedIpAddrTable | not-accessible | current | The table of addresses associated with each virtual router. |
| 1.3.6.1.2.1.207.1.1.2.1 | Rowvrrpv3AssociatedIpAddrEntry | not-accessible | current | An entry in the table contains an IP address that is associated with a virtual router. The number of rows for a given IP version, VrID, and ifIndex will equal … |
| 1.3.6.1.2.1.207.1.1.2.1.1 | Columnvrrpv3AssociatedIpAddrAddress | not-accessible | current | The assigned IP addresses that a virtual router is responsible for backing up. The IP address type is determined by the value of vrrpv3OperationsInetAddrType i… |
| 1.3.6.1.2.1.207.1.1.2.1.2 | Columnvrrpv3AssociatedIpAddrRowStatus | read-create | current | The row status variable, used according to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object … |
| 1.3.6.1.2.1.207.1.2 | Nodevrrpv3Statistics | |||
| 1.3.6.1.2.1.207.1.2.1 | Scalarvrrpv3RouterChecksumErrors | read-only | current | The total number of VRRP packets received with an invalid VRRP checksum value. Discontinuities in the value of this counter can occur at re-initialization of t… |
| 1.3.6.1.2.1.207.1.2.2 | Scalarvrrpv3RouterVersionErrors | read-only | current | The total number of VRRP packets received with an unknown or unsupported version number. Discontinuities in the value of this counter can occur at re-initializ… |
| 1.3.6.1.2.1.207.1.2.3 | Scalarvrrpv3RouterVrIdErrors | read-only | current | The total number of VRRP packets received with a VRID that is not valid for any virtual router on this router. Discontinuities in the value of this counter can… |
| 1.3.6.1.2.1.207.1.2.4 | Scalarvrrpv3GlobalStatisticsDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which one of vrrpv3RouterChecksumErrors, vrrpv3RouterVersionErrors, and vrrpv3RouterVrIdErrors suffered a… |
| 1.3.6.1.2.1.207.1.2.5 | Tablevrrpv3StatisticsTable | not-accessible | current | Table of virtual router statistics. |
| 1.3.6.1.2.1.207.1.2.5.1 | Rowvrrpv3StatisticsEntry | not-accessible | current | An entry in the table containing statistics information about a given virtual router. |
| 1.3.6.1.2.1.207.1.2.5.1.1 | Columnvrrpv3StatisticsMasterTransitions | read-only | current | The total number of times that this virtual router's state has transitioned to master state. Discontinuities in the value of this counter can occur at re-initi… |
| 1.3.6.1.2.1.207.1.2.5.1.2 | Columnvrrpv3StatisticsNewMasterReason | read-only | current | This indicates the reason for the virtual router to transition to master state. If the virtual router never transitioned to master state, the value of this obj… |
| 1.3.6.1.2.1.207.1.2.5.1.3 | Columnvrrpv3StatisticsRcvdAdvertisements | read-only | current | The total number of VRRP advertisements received by this virtual router. Discontinuities in the value of this counter can occur at re-initialization of the man… |
| 1.3.6.1.2.1.207.1.2.5.1.4 | Columnvrrpv3StatisticsAdvIntervalErrors | read-only | current | The total number of VRRP advertisement packets received for which the advertisement interval is different from the vrrpv3OperationsAdvInterval configured on th… |
| 1.3.6.1.2.1.207.1.2.5.1.5 | Columnvrrpv3StatisticsIpTtlErrors | read-only | current | The total number of VRRP packets received by the virtual router with IPv4 TTL (for VRRP over IPv4) or IPv6 Hop Limit (for VRRP over IPv6) not equal to 255. Dis… |
| 1.3.6.1.2.1.207.1.2.5.1.6 | Columnvrrpv3StatisticsProtoErrReason | read-only | current | This indicates the reason for the last protocol error. This SHOULD be set to noError(0) when no protocol errors are encountered. Used by vrrpv3ProtoError notif… |
| 1.3.6.1.2.1.207.1.2.5.1.7 | Columnvrrpv3StatisticsRcvdPriZeroPackets | read-only | current | The total number of VRRP packets received by the virtual router with a priority of '0'. Discontinuities in the value of this counter can occur at re-initializa… |
| 1.3.6.1.2.1.207.1.2.5.1.8 | Columnvrrpv3StatisticsSentPriZeroPackets | read-only | current | The total number of VRRP packets sent by the virtual router with a priority of '0'. Discontinuities in the value of this counter can occur at re-initialization… |
| 1.3.6.1.2.1.207.1.2.5.1.9 | Columnvrrpv3StatisticsRcvdInvalidTypePackets | read-only | current | The number of VRRP packets received by the virtual router with an invalid value in the 'type' field. Discontinuities in the value of this counter can occur at … |
| 1.3.6.1.2.1.207.1.2.5.1.10 | Columnvrrpv3StatisticsAddressListErrors | read-only | current | The total number of packets received for which the address list does not match the locally configured list for the virtual router. Discontinuities in the value… |
| 1.3.6.1.2.1.207.1.2.5.1.11 | Columnvrrpv3StatisticsPacketLengthErrors | read-only | current | The total number of packets received with a packet length less than the length of the VRRP header. Discontinuities in the value of this counter can occur at re… |
| 1.3.6.1.2.1.207.1.2.5.1.12 | Columnvrrpv3StatisticsRowDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have … |
| 1.3.6.1.2.1.207.1.2.5.1.13 | Columnvrrpv3StatisticsRefreshRate | read-only | current | The minimum reasonable polling interval for this entry. This object provides an indication of the minimum amount of time required to update the counters in thi… |
| 1.3.6.1.2.1.207.2 | Nodevrrpv3Conformance | |||
| 1.3.6.1.2.1.207.2.1 | Nodevrrpv3Compliances | |||
| 1.3.6.1.2.1.207.2.1.1 | Compliancevrrpv3FullCompliance | current | The compliance statement | |
| 1.3.6.1.2.1.207.2.1.2 | Compliancevrrpv3ReadOnlyCompliance | read-only | current | When this MIB module is implemented without support for read-create (i.e., in read-only mode), then such an implementation can claim read-only compliance. Such… |
| 1.3.6.1.2.1.207.2.2 | Nodevrrpv3Groups | |||
| 1.3.6.1.2.1.207.2.2.1 | Groupvrrpv3OperationsGroup | current | Conformance group for VRRPv3 operations. | |
| 1.3.6.1.2.1.207.2.2.2 | Groupvrrpv3StatisticsGroup | current | Conformance group for VRRPv3 statistics. | |
| 1.3.6.1.2.1.207.2.2.3 | Groupvrrpv3StatisticsDiscontinuityGroup | current | Objects providing information about counter discontinuities. | |
| 1.3.6.1.2.1.207.2.2.4 | Groupvrrpv3InfoGroup | current | Conformance group for objects contained in VRRPv3 notifications. | |
| 1.3.6.1.2.1.207.2.2.5 | Groupvrrpv3NotificationsGroup | current | The VRRP MIB Notification Group. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Vrrpv3VrIdTC | Integer32 (1..255) | current | The value of the Virtual Router Identifier noted as (VRID) in RFC 5798. This, along with interface index (ifIndex) and IP version, serves to uniquely identify a virtual router on a given VRRP router. |