WAC510
206 objects
The MIB module for 802.11a/b/g/n Enterprise WiFi AP. iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).netgear(4526).productID(100).accesspoint(7).wac510(14)
Imported Objects
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526 | Nodenetgear | |||
| 1.3.6.1.4.1.4526.100 | NodeproductID | |||
| 1.3.6.1.4.1.4526.100.7 | Nodeaccesspoint | |||
| 1.3.6.1.4.1.4526.100.7.14 | Identitywac510 | The MIB module for 802.11a/b/g/n Enterprise WiFi AP. iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).netgear(4526).productID(100).accesspoint(7).wa… | ||
| 1.3.6.1.4.1.4526.100.7.14.1 | NodebasicSettings | |||
| 1.3.6.1.4.1.4526.100.7.14.1.1 | ScalarapName | read-write | current | This attribute indicates the name of AP. The name is also the NETBIOS name of the AP. |
| 1.3.6.1.4.1.4526.100.7.14.1.2 | ScalarsysMacAddress | read-only | current | This attribute indicates the MAC Address of the ethernet interface. |
| 1.3.6.1.4.1.4526.100.7.14.1.3 | ScalarsysVersion | read-only | current | This attribute indicates the system firmware version. |
| 1.3.6.1.4.1.4526.100.7.14.1.4 | ScalarsysCountryRegion | read-write | current | This attribute indicates the region of operation for which the wireless interface is intended. |
| 1.3.6.1.4.1.4526.100.7.14.1.5 | ScalaradminPasswd | read-write | current | This attribute indicates the administrator password. The AP can be managed from utilities such as ssh, HTTP/HTTPS browser, SNMP management tool and so on. |
| 1.3.6.1.4.1.4526.100.7.14.1.6 | ScalardhcpClientStatus | read-write | current | This attribute indicates the DHCP client status. DHCP client is disabled by default. |
| 1.3.6.1.4.1.4526.100.7.14.1.7 | ScalaripAddr | read-write | current | This attribute indicates the static management IP address of the AP. |
| 1.3.6.1.4.1.4526.100.7.14.1.8 | ScalarnetmaskAddr | read-write | current | This attribute indicates the static netmask of the management interface. |
| 1.3.6.1.4.1.4526.100.7.14.1.9 | ScalargatewayAddr | read-write | current | This attribute indicates the static gateway IP address for the management interface. |
| 1.3.6.1.4.1.4526.100.7.14.1.10 | ScalarpriDnsAddr | read-write | current | This attribute indicates the address that will be used as the first entry in the DNS server list if dhcpClientStatus is disabled. ***The value can only be set … |
| 1.3.6.1.4.1.4526.100.7.14.1.11 | ScalarsndDnsAddr | read-write | current | This attribute indicates the address that will be used as the second entry in the DNS server list if dhcpClientStatus is disabled. ***The value can only be set… |
| 1.3.6.1.4.1.4526.100.7.14.1.12 | ScalarspanTreeStatus | read-write | current | This attribute indicates the status of Spanning Tree Protocol in the AP. The default value is disable(0). |
| 1.3.6.1.4.1.4526.100.7.14.1.13 | ScalarmanagementVlanID | read-write | current | This attribute indicates the Management VLAN ID. Default value of management VLAN ID is 1. |
| 1.3.6.1.4.1.4526.100.7.14.1.14 | ScalarnetworkIntegrityCheck | read-write | current | This attribute indicates the status of internet connection check . AP automatically validates whether the internet connection is active before allowing wireles… |
| 1.3.6.1.4.1.4526.100.7.14.1.15 | ScalaruntaggedVlanStatus | read-write | current | This attribute indicates the status of untagged VLAN. The untagged VLAN is enabled by default. |
| 1.3.6.1.4.1.4526.100.7.14.1.16 | ScalaruntaggedVlanID | read-write | current | This attribute indicates the Untagged VLAN ID. Default value of untagged VLAN ID is 1. |
| 1.3.6.1.4.1.4526.100.7.14.1.17 | ScalarsysHardwareVersion | read-only | current | This attribute indicates the system hardware version. |
| 1.3.6.1.4.1.4526.100.7.14.1.18 | ScalarsysSerialNumber | read-only | current | This attribute indicates the system serial number. |
| 1.3.6.1.4.1.4526.100.7.14.1.19 | ScalarlldpStatus | read-write | current | This attribute indicates the LLDP status. LLDP is enabled by default. |
| 1.3.6.1.4.1.4526.100.7.14.1.21 | ScalardeviceMode | read-write | current | This attribute indicates the operating mode of a radio. The default value is ap(0). |
| 1.3.6.1.4.1.4526.100.7.14.1.22 | ScalarwirelessScheduleStatus | read-write | current | This attribute shall indicate the status of Wireless Scheduling. The default value is disable(0). |
| 1.3.6.1.4.1.4526.100.7.14.1.25 | ScalarupnpStatus | read-write | current | This attribute indicates the status of UPnP. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.14.1.26 | ScalarinterVlanRouting | read-write | current | This attribute indicates the status of inter VLAN Routing. The inter VLAN Routing is disabled by default. |
| 1.3.6.1.4.1.4526.100.7.14.2 | NodewlanSettings | |||
| 1.3.6.1.4.1.4526.100.7.14.2.1 | TablewlanSettingTable | not-accessible | current | wireless interface settings table. |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1 | RowwlanSettingEntry | not-accessible | current | An entry in the wlanSettingTable. Each wlanSettingEntry represents a wireless profile (2.4GHz band or 5GHz band). On a single radio device, the same wireless i… |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.1 | ColumnwlanIndex | read-only | current | Specifies one of the 2 wireless profiles. |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.2 | ColumnoperateMode | read-write | current | This attribute shall indicate the desired wireless operating mode. The option are: dot11b - All 802.11b wireless stations can be used. 802.11g wireless station… |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.3 | ColumnradioStatus | read-write | current | This attribute shall indicate the status of radio. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.4 | Columnchannel | read-write | current | This attribute shall indicate the channel number to be used. The default value is auto(0). |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.5 | ColumndataRate | read-write | current | This attribute shall indicate the transmit rate applicable to 802.11b, 802.11bg and 802.11a modes. When the operateMode is: dot11b(0) - can set to 0:best, 2:1M… |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.6 | ColumnwmmSupport | read-write | current | This field indicates the status of WMM(Wireless Multimedia) suport. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.7 | ColumnbeaconInterval | read-write | current | This attribute shall indicate the Beacon Interval. The default value is 100. |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.8 | ColumnrtsThreshold | read-write | current | This attribute shall indicate the RTS threshold. The default value is 2347. |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.9 | ColumnfragLength | read-write | current | This attribute shall indicate the fragmentation threshold. The default value is 2346. |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.10 | ColumndtimInterval | read-write | current | This attribute shall indicate the beacon delivery traffic indication message period in multiples of beaconInterval. The default value is 3. |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.11 | ColumnpreambleType | read-write | current | This attribute shall indicate the preamble setting. This setting is only applicable to 802.11b, 802.11bg and 802.11ng modes. When set to auto(0), depending on … |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.12 | ColumntxPower | read-write | current | This attribute shall indicate the transmit power. The default value is full(0). |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.13 | ColumnaccessControlMode | read-write | current | The field indicates whether the access control list is enabled and the source of the database of the access control list. |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.15 | ColumnmcsRate | read-write | current | This attribute shall indicate the transmit rate to be used in case of 11na and 11ng modes. Rate index of 0 means 15 Mbps when the channel width is 40Mhz or dyn… |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.16 | ColumnguardInterval | read-write | current | This attribute shall indicate the guard interval. When set to auto(0), depending on the station type, AP selects 400ns or 800ns guard interval. The default val… |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.17 | ColumnchannelWidth | read-write | current | This attribute shall set the CWM mode to 20Mhz or 40Mhz or automatically switches between 20 and 40 based on channel conditions. For 11ng mode, the default val… |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.20 | ColumnrifsTransmission | read-write | current | This attribute sets the status of rifsTransmission. The default value of the attribute is disable(0). |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.21 | ColumnapMode | read-write | current | Specifies the device operation mode. ap: device operates as an Access Point p2p: device operates as a point-to-point wireless bridge No STA are associated to t… |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.22 | ColumnuapsdStatus | read-write | current | This attribute shall indicate whether wmm power save. The default value is enable(1) . |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.23 | ColumnmaxClientAssociations | read-write | current | This attribute shall indicates the max wireless clients that allowed to associated.When the value is set 0,and the wireless clients are not limited |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.26 | ColumnbandSteeringStatus | read-write | current | This attribute shall indicate the status of Band Steering. The default value is disable(0). |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.27 | ColumnbandSteeringRssi24GHz | read-write | current | This attribute shall indicate the Band-Steering RSSI value of 2.4GHz. The default value is 15. |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.28 | ColumnbandSteeringRssi50GHz | read-write | current | This attribute shall indicate the Band-Steering RSSI value of 5GHz. The default value is 15. |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.30 | ColumnloadBalanceStatus | read-write | current | This attribute shall indicate the status of Load Balancing Mode. The default value is disable(0). |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.31 | ColumnloadUtilPercent | read-write | current | This attribute shall indicate the Load Utilizations of new Associations. The default value is 99. |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.32 | ColumnframeBurst | read-write | current | This attribute shall indicate the status of Frame Burst. The default value is disable(0). |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.33 | ColumnrateLimit | read-write | current | This attribute shall indicate the Rate Limit. The default value is 50. |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.34 | ColumnqamStatus | read-write | current | This attribute shall indicate the status of 802.11n QAM. The default value is disable(0). |
| 1.3.6.1.4.1.4526.100.7.14.2.1.1.35 | ColumndfsStatus | read-only | current | This attribute shall indicate the Rate Limit. |
| 1.3.6.1.4.1.4526.100.7.14.3 | NodevapSettings | |||
| 1.3.6.1.4.1.4526.100.7.14.3.1 | TablevapSettingTable | not-accessible | current | VAP attributes setting table. |
| 1.3.6.1.4.1.4526.100.7.14.3.1.1 | RowvapSettingEntry | not-accessible | current | VAP attributes setting table entry. |
| 1.3.6.1.4.1.4526.100.7.14.3.1.1.1 | ColumnvapIndex | read-only | current | Specifies one of the 8 VAP profiles. |
| 1.3.6.1.4.1.4526.100.7.14.3.1.1.2 | ColumnvapProfileName | read-write | current | Name of this VAP profile. |
| 1.3.6.1.4.1.4526.100.7.14.3.1.1.3 | ColumnvapProfileStatus | read-write | current | This attribute shall indicate the status of this VAP profile. |
| 1.3.6.1.4.1.4526.100.7.14.3.1.1.4 | Columnssid | read-write | current | This attribute shall indicate SSID.Its length can't be larger than 32 . |
| 1.3.6.1.4.1.4526.100.7.14.3.1.1.5 | ColumnhideNetworkName | read-write | current | This attribute shall indicate whether to broadcast wireless network Name (SSID). The default value of this attribute is disable(0). |
| 1.3.6.1.4.1.4526.100.7.14.3.1.1.6 | ColumnvlanID | read-write | current | This attribute shall indicate the VLAN ID of the VAP. |
| 1.3.6.1.4.1.4526.100.7.14.3.1.1.7 | ColumnclientSecuritySeperation | read-write | current | This attribute shall indicate whether wireless clients in a BSS can communicate with each other. The default value of this attribute is disable(0). |
| 1.3.6.1.4.1.4526.100.7.14.3.1.1.8 | ColumnauthenticationType | read-write | current | The field indicates how to authenticate the station. |
| 1.3.6.1.4.1.4526.100.7.14.3.1.1.9 | Columnencryption | read-write | current | The field indicates how to encrypt the packets sent to a station. |
| 1.3.6.1.4.1.4526.100.7.14.3.1.1.10 | ColumnpresharedKey | read-write | current | This attribute shall indicate preshared key used in the following authenticationtype: wpapsk(16), wpa2psk(32), wpapskORwpa2psk(48). |
| 1.3.6.1.4.1.4526.100.7.14.3.1.1.11 | ColumnwepKeyType | read-write | current | The field shall indicate the type of WEP key. |
| 1.3.6.1.4.1.4526.100.7.14.3.1.1.12 | ColumnwepKeyNo | read-write | current | The field indicates the number of default wep key. |
| 1.3.6.1.4.1.4526.100.7.14.3.1.1.13 | ColumnwepKey1 | read-write | current | The field indicates the key value of the first default wep key. |
| 1.3.6.1.4.1.4526.100.7.14.3.1.1.14 | ColumnwepKey2 | read-write | current | The field indicates the key value of the second default wep key. |
| 1.3.6.1.4.1.4526.100.7.14.3.1.1.15 | ColumnwepKey3 | read-write | current | The field indicates the key value of the third default wep key. |
| 1.3.6.1.4.1.4526.100.7.14.3.1.1.16 | ColumnwepKey4 | read-write | current | The field indicates the key value of the fourth default wep key. |
| 1.3.6.1.4.1.4526.100.7.14.3.1.1.17 | ColumnwepPassPhrase | read-write | current | This attribute shall indicate WEP pass phrase, used to generate four WEP keys. |
| 1.3.6.1.4.1.4526.100.7.14.3.1.1.18 | ColumnincomingQoSPolicy | read-write | current | This attribute shall indicate the policy index to be configured to the selected interface. |
| 1.3.6.1.4.1.4526.100.7.14.3.1.1.19 | ColumnoutgoingQoSPolicy | read-write | current | This attribute shall indicate the policy index to be configured to the selected interface. |
| 1.3.6.1.4.1.4526.100.7.14.4 | NodewdsSettings | |||
| 1.3.6.1.4.1.4526.100.7.14.4.1 | TablewdsSettingTable | not-accessible | current | WDS attributes in tablular form to allow for multiple instances of wds setting profile. |
| 1.3.6.1.4.1.4526.100.7.14.4.1.1 | RowwdsSettingEntry | not-accessible | current | An entry in the wdsTable. |
| 1.3.6.1.4.1.4526.100.7.14.4.1.1.1 | ColumnwdsIndex | read-only | current | Specifies one of the 4 wireless bridge profiles. |
| 1.3.6.1.4.1.4526.100.7.14.4.1.1.2 | ColumnwdsProfileName | read-write | current | Name of the wireless bridge profile. |
| 1.3.6.1.4.1.4526.100.7.14.4.1.1.3 | ColumnwdsProfileStatus | read-write | current | This attribute shall indicate the status of this wireless bridge profile. |
| 1.3.6.1.4.1.4526.100.7.14.4.1.1.4 | ColumnremoteMacAddress | read-write | current | This attribute shall indicate the link partner's MAC address. |
| 1.3.6.1.4.1.4526.100.7.14.4.1.1.5 | ColumnwdsAuthenticationtype | read-write | current | The field indicates how to authenticate the link partner. |
| 1.3.6.1.4.1.4526.100.7.14.4.1.1.6 | ColumnwdsEncryption | read-write | current | The field indicates how to encrypt the packets sent to link partner. |
| 1.3.6.1.4.1.4526.100.7.14.4.1.1.7 | ColumnwdsPresharedKey | read-write | current | This attribute shall indicate preshared key used by wpapsk or wpa2psk. |
| 1.3.6.1.4.1.4526.100.7.14.4.1.1.8 | ColumnwdsWepKeyType | read-write | current | The field shall indicate the type of WEP key. |
| 1.3.6.1.4.1.4526.100.7.14.4.1.1.9 | ColumnwdsWepKey | read-write | current | The field indicates the value of the WEP key. |
| 1.3.6.1.4.1.4526.100.7.14.4.1.1.10 | ColumnwdsWepPassPhrase | read-write | current | This attribute shall indicate WEP pass phrase, used to generate the WEP key. |
| 1.3.6.1.4.1.4526.100.7.14.6 | NoderemoteSettings | |||
| 1.3.6.1.4.1.4526.100.7.14.6.1 | ScalarinactivityTimeOut | read-write | current | This attribute shall indicate the session inactivity time after which the session will be terminated. This is applicable to Telnet, SSH and HTTP sessions. Defa… |
| 1.3.6.1.4.1.4526.100.7.14.6.2 | ScalarsshStatus | read-write | current | This attribute shall indicate the SSH daemon status. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.14.6.3 | ScalartelnetStatus | read-write | current | This attribute shall indicate the telnet daemon status. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.14.6.4 | ScalarsnmpStatus | read-write | current | This attribute shall indicate the SNMP agent status. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.14.6.5 | ScalartrapServerIP | read-write | current | The field indicates the trap server IP address. |
| 1.3.6.1.4.1.4526.100.7.14.6.6 | ScalartrapPort | read-write | current | The field indicates the trap port. The default value of this variable is 162. |
| 1.3.6.1.4.1.4526.100.7.14.6.7 | ScalartrapServerCommunity | read-write | current | The field indicates the community name for traps. |
| 1.3.6.1.4.1.4526.100.7.14.6.8 | ScalarreadOnlyCommunity | read-write | current | The field indicates the read only community name. ***The value can only be set to 1 to 32 readable string. |
| 1.3.6.1.4.1.4526.100.7.14.6.9 | ScalarreadWriteCommunity | read-write | current | The field indicates the read write community name. ***The value can only be set to 1 to 32 readable string. |
| 1.3.6.1.4.1.4526.100.7.14.6.10 | ScalargenieProStatus | read-write | current | Setting this object causes the device to enable Genie Pro remote management. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.14.6.11 | ScalarhttpStatus | read-write | current | This attribute shall indicate the http web management status. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.14.6.12 | ScalarhttpsStatus | read-write | current | This attribute shall indicate the https web management status. The default value is disable(0). |
| 1.3.6.1.4.1.4526.100.7.14.8 | NodestationList | |||
| 1.3.6.1.4.1.4526.100.7.14.8.1 | TablestationListTable | not-accessible | current | List of associated stations in a tabular form. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1 | RowstationListEntry | not-accessible | current | An entry in the stationListTable. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.1 | ColumnmacAddress | read-only | current | This attribute shall indicate MAC address of the associated stationID. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.2 | ColumnclientIpaddr | read-only | current | This attribute shall indicate IP address of the associated stationID. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.3 | ColumnassociationTime | read-only | current | This attribute shall indicate ssid of the VAP to which the station is associated. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.4 | ColumnclientWirelessMode | read-only | current | This attribute shall indicate the wireless mode of the associated stationID. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.5 | ColumnassociatedSsid | read-only | current | This attribute shall indicate ssid of the VAP to which the station is associated. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.6 | ColumnassociatedBssid | read-only | current | This attribute shall indicate bssid of the VAP to which the station is associated. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.7 | ColumnassociatedSNR | read-only | current | This attribute shall indicate the noise margin of Ap with respect to the its recieved signal from station. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.8 | ColumnclientChannelWidth | read-only | current | This attribute shall indicate the channel width for the associated station in 11n mode. Not applicable for a station in 11a/b/g mode. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.9 | ColumnstationStatus | read-only | current | This attribute shall indicate the status of station. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.10 | ColumnstationRssi | read-only | current | Receive Signal Strength Indicator. This attribute shall indicate the strength of an incomming signal of station. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.11 | ColumnidleTime | read-only | current | This attribute shall indicate the Idle time of station. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.12 | ColumnstationChannel | read-only | current | This attribute shall indicate the channel number used. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.13 | ColumntxDataRate | read-only | current | This attribute shall indicate the TX DataRate. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.14 | ColumnrxDataRate | read-only | current | This attribute shall indicate the Rx DataRate. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.15 | ColumnstationState | read-only | current | This attribute shall indicate the station State. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.16 | ColumnstationAuthenticationType | read-only | current | This attribute shall indicates how to authenticate the station. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.17 | ColumnstationAID | read-only | current | This attribute shall indicate the association ID value assigned by the AP to identify the association. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.18 | ColumnstationTxSeq | read-only | current | This attribute shall indicate the Transmit Sequence of the station. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.19 | ColumnstationRxSeq | read-only | current | This attribute shall indicate the Receive Sequence of the station. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.20 | ColumnstationCapability | read-only | current | This attribute shall indicate the capability of station associated. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.21 | ColumnstationCipher | read-only | current | This attribute shall indicate the Cipher of station associated. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.22 | ColumnstationRecvPayloadBytes | read-only | current | This attribute shall indicate the count of the payload bytes received from the wireless client. |
| 1.3.6.1.4.1.4526.100.7.14.8.1.1.23 | ColumnstationTransPayloadBytes | read-only | current | This attribute shall indicate the count of the payload bytes sent to the wireless client. |
| 1.3.6.1.4.1.4526.100.7.14.10 | NodeuserCommand | |||
| 1.3.6.1.4.1.4526.100.7.14.10.1 | ScalarresetAP | read-write | current | Setting this object causes the device to reboot. The actual value is ignored. |
| 1.3.6.1.4.1.4526.100.7.14.10.2 | ScalarfirmwareUpgrade | read-write | current | Setting this object to the name of a file, causes the device to download <upgrade URL>/<file>.Run the HTTPd in the remote machine After the file is downloaded,… |
| 1.3.6.1.4.1.4526.100.7.14.10.3 | ScalarbackupSettings | read-write | current | Setting this object to the hostname username password and name of a file, causes the running config to be saved to the file. ipAddress username password filena… |
| 1.3.6.1.4.1.4526.100.7.14.10.4 | ScalarrestoreSettings | read-write | current | Setting this object to the hostname username password and name of a file, causes the device to download the file .After the file is downloaded, it is copied to… |
| 1.3.6.1.4.1.4526.100.7.14.10.5 | ScalarrestoreFactoryDefaults | read-write | current | Setting this object causes the device to restore factory default settings. The actual value is ignored. |
| 1.3.6.1.4.1.4526.100.7.14.10.6 | ScalarrestoreDefaultPassword | read-write | current | Setting this object causes the device to restore the default administrator password. |
| 1.3.6.1.4.1.4526.100.7.14.11 | NodetimeSettings | |||
| 1.3.6.1.4.1.4526.100.7.14.11.1 | ScalarcurrentTime | read-only | current | This field indicates the current system time in a format: YYYY/MM/DD hh:mm:ss. |
| 1.3.6.1.4.1.4526.100.7.14.11.2 | ScalartimeZone | read-write | current | This field indicates the time zone of the system. |
| 1.3.6.1.4.1.4526.100.7.14.11.3 | ScalarntpClientStatus | read-write | current | Indicates whether the NTP client is enabled. |
| 1.3.6.1.4.1.4526.100.7.14.11.4 | ScalarcustomNtpServer | read-write | current | Indicates whether custom NTP server is to be used. |
| 1.3.6.1.4.1.4526.100.7.14.11.5 | ScalarntpAddr | read-write | current | Indicates the address or domain name of the NTP server. |
| 1.3.6.1.4.1.4526.100.7.14.12 | NodedhcpsSettings | |||
| 1.3.6.1.4.1.4526.100.7.14.12.1 | ScalardhcpServerStatus | read-write | current | This attribute shall indicate the status of DHCP server. The default value is disable(0). |
| 1.3.6.1.4.1.4526.100.7.14.12.2 | ScalardhcpsVlanId | read-write | current | This attribute indicates the VLAN ID of DHCP server's VLAN. Default value of DHCP server's VLAN ID is 1. |
| 1.3.6.1.4.1.4526.100.7.14.12.3 | ScalardhcpsIpStart | read-write | current | This attribute indicates the starting IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| 1.3.6.1.4.1.4526.100.7.14.12.4 | ScalardhcpsIpEnd | read-write | current | This attribute indicates the ending IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| 1.3.6.1.4.1.4526.100.7.14.12.5 | ScalardhcpsNetMask | read-write | current | This attribute indicates the net mask of DHCP server will give. ***The value can only be set to the net mask address in dot format. |
| 1.3.6.1.4.1.4526.100.7.14.12.6 | ScalardhcpsGateway | read-write | current | This attribute indicates the gateway IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| 1.3.6.1.4.1.4526.100.7.14.12.7 | ScalardhcpsPriDns | read-write | current | This attribute indicates the primary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| 1.3.6.1.4.1.4526.100.7.14.12.8 | ScalardhcpsSndDns | read-write | current | This attribute indicates the secondary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| 1.3.6.1.4.1.4526.100.7.14.12.9 | ScalardhcpsPriWins | read-write | current | This attribute indicates the primary WINS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| 1.3.6.1.4.1.4526.100.7.14.12.10 | ScalardhcpsSndWins | read-write | current | This attribute indicates the secondary WINS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| 1.3.6.1.4.1.4526.100.7.14.12.11 | ScalardhcpsLeaseTime | read-write | current | This attribute shall indicate the IP lease time of DHCP server will give to DHCP clients in minutes. The default value is 1 day (1440 minutes). |
| 1.3.6.1.4.1.4526.100.7.14.16 | NodeaccessControlSettings | |||
| 1.3.6.1.4.1.4526.100.7.14.16.1 | TablewlanAccessControlLocalTable | not-accessible | current | ACL attributes in tablular form to allow for multiple instances on an agent. |
| 1.3.6.1.4.1.4526.100.7.14.16.1.1 | RowwlanAccessControlLocalEntry | not-accessible | current | An entry in the wlanAccessControlLocalTable. |
| 1.3.6.1.4.1.4526.100.7.14.16.1.1.1 | ColumnaclMAC | read-only | current | This field should indicate an MAC address entry in the access control local database. |
| 1.3.6.1.4.1.4526.100.7.14.16.1.1.2 | ColumnaclMacStatus | read-create | current | The ACL Mac status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry |
| 1.3.6.1.4.1.4526.100.7.14.17 | Nodetraps | |||
| 1.3.6.1.4.1.4526.100.7.14.17.1 | NoderogueApDetectionTrap | |||
| 1.3.6.1.4.1.4526.100.7.14.17.1.1 | NotificationrogueApDetectionNotification | current | This trap shall notify detection of an unknown AP. | |
| 1.3.6.1.4.1.4526.100.7.14.17.1.2 | NoderogueApDetectionObjects | |||
| 1.3.6.1.4.1.4526.100.7.14.17.1.2.1 | ScalarrogueApDetectionMacAddr | accessible-for-notify | current | This object contains the MAC address of the detected unknown AP. |
| 1.3.6.1.4.1.4526.100.7.14.17.1.2.2 | ScalarrogueApDetectionSsid | accessible-for-notify | current | This object contains the SSID of the detected unknown AP. |
| 1.3.6.1.4.1.4526.100.7.14.17.1.2.3 | ScalarrogueApDetectionPrivacy | accessible-for-notify | current | This object contains the privacy option for the detected unknown AP. |
| 1.3.6.1.4.1.4526.100.7.14.17.1.2.4 | ScalarrogueApDetectionBand | accessible-for-notify | current | This object contains the operating band of the detected unknown AP. |
| 1.3.6.1.4.1.4526.100.7.14.17.1.2.5 | ScalarrogueApDetectionChannel | accessible-for-notify | current | This object contains the operating channel of the detected unknown AP. |
| 1.3.6.1.4.1.4526.100.7.14.17.1.2.6 | ScalarrogueApDetectionRate | accessible-for-notify | current | This object contains the data rate of the detected unknown AP. |
| 1.3.6.1.4.1.4526.100.7.14.17.1.2.7 | ScalarrogueApDetectionBeaconInt | accessible-for-notify | current | This object contains the beacon interval of the detected unknown AP. |
| 1.3.6.1.4.1.4526.100.7.14.17.1.2.8 | ScalarrogueApDetectionNumBeacon | accessible-for-notify | current | This object contains the number of beacons sent by the detected unknown AP during the scan interval. |
| 1.3.6.1.4.1.4526.100.7.14.17.1.2.9 | ScalarrogueApDetectionLastBeacon | accessible-for-notify | current | This object contains the time at which last beacon was sent by the detected unknown AP. |
| 1.3.6.1.4.1.4526.100.7.14.17.2 | NodemaxStationTrap | |||
| 1.3.6.1.4.1.4526.100.7.14.17.2.1 | NotificationmaxStationNotification | current | This trap shall notify reaching the max station limit. | |
| 1.3.6.1.4.1.4526.100.7.14.17.2.2 | NodemaxStationObjects | |||
| 1.3.6.1.4.1.4526.100.7.14.17.2.2.1 | ScalarmaxStationMacAddr | accessible-for-notify | current | This object contains the MAC address of the interface on which max station limit reached. |
| 1.3.6.1.4.1.4526.100.7.14.17.2.2.2 | ScalarmaxStationBand | accessible-for-notify | current | This object contains the operating band of the interface on which max station limit reached. |
| 1.3.6.1.4.1.4526.100.7.14.17.3 | NodeaclMismatchTrap | |||
| 1.3.6.1.4.1.4526.100.7.14.17.3.1 | NotificationaclMismatchNotification | current | This trap shall notify the denial of a station. | |
| 1.3.6.1.4.1.4526.100.7.14.17.3.2 | NodeaclMismatchObjects | |||
| 1.3.6.1.4.1.4526.100.7.14.17.3.2.1 | ScalaraclMismatchMacAddr | accessible-for-notify | current | This object contains the MAC address of the station which was denied association request due to ACL mismatch. |
| 1.3.6.1.4.1.4526.100.7.14.17.3.2.2 | ScalaraclMismatchBssid | accessible-for-notify | current | This object contains BSSID of the VAP on which the station was denied association request due to ACL mismatch. |
| 1.3.6.1.4.1.4526.100.7.14.17.3.2.3 | ScalaraclMismatchSsid | accessible-for-notify | current | This object contains the SSID of the VAP on which the station was denied association request due to ACL mismatch. |
| 1.3.6.1.4.1.4526.100.7.14.17.4 | NodenoBeaconTrap | |||
| 1.3.6.1.4.1.4526.100.7.14.17.4.1 | NotificationnoBeaconNotification | current | This trap shall notify no outgoing beacons. | |
| 1.3.6.1.4.1.4526.100.7.14.17.4.2 | NodenoBeaconObjects | |||
| 1.3.6.1.4.1.4526.100.7.14.17.4.2.1 | ScalarnoBeaconBssid | accessible-for-notify | current | This object contains BSSID of the VAP for which the watch dog timer detected no outgoing beacons. |
| 1.3.6.1.4.1.4526.100.7.14.24 | NodeurlfltrSettings | |||
| 1.3.6.1.4.1.4526.100.7.14.24.1 | ScalarblockedDomain | read-write | current | This attribute shall indicate the URL to be blocked. |
| 1.3.6.1.4.1.4526.100.7.14.24.2 | ScalarallowedDomain | read-write | current | This attribute shall indicate the URL to be unblocked. |
| 1.3.6.1.4.1.4526.100.7.14.24.3 | ScalarblockedHostname | read-write | current | This attribute shall indicate the Host Name to be blocked. |
| 1.3.6.1.4.1.4526.100.7.14.24.4 | ScalarallowedHostname | read-write | current | This attribute shall indicate the Host Name to be unblocked. |
| 1.3.6.1.4.1.4526.100.7.14.24.5 | ScalarblockedExpression | read-write | current | This attribute shall indicate the URL (having specified Expression) to be unblocked. |
| 1.3.6.1.4.1.4526.100.7.14.25 | NodepacketCaptureSettings | |||
| 1.3.6.1.4.1.4526.100.7.14.25.1 | ScalarbeaconsCapture | read-write | current | This attribute shall indicate the Status of Beacon Capture. The default value is enable(1). |
| 1.3.6.1.4.1.4526.100.7.14.25.2 | ScalarpromiscuousCapture | read-write | current | This attribute shall indicate the Status of Promiscuous Capture. The default value is disable(0). |
| 1.3.6.1.4.1.4526.100.7.14.25.3 | ScalarclientFltrStatus | read-write | current | This attribute shall indicate the Status of Client Filter. The default value is disable(0). |
| 1.3.6.1.4.1.4526.100.7.14.25.4 | ScalarclientFltrMac | read-write | current | This attribute indicates the MAC Address of the particular Client. |
| 1.3.6.1.4.1.4526.100.7.14.25.5 | ScalarcaptureInterface | read-write | current | This attribute shall indicate the Packet Capture Interface. The default value is radio1(4). |
| 1.3.6.1.4.1.4526.100.7.14.25.6 | ScalarcaptureDuration | read-write | current | This attribute indicates the Packet Capture duration. The default value is 60. |
| 1.3.6.1.4.1.4526.100.7.14.25.7 | ScalarcaptureFileSize | read-write | current | This attribute indicates the Maximum size of Packet Capture file. The default value is 1024. |