WAN-MIB
129 objects
The mib for controlling WAN-related features of WAN access devices.
Imported Objects
| AVAYAGEN-MIB | lsg |
| DS0BUNDLE-MIB MISSING | dsx0BundleCircuitIdentifier dsx0BundleIfIndex dsx0BundleIndex dsx0BundleRowStatus |
| FRAME-RELAY-DTE-MIB | DLCI |
| IF-MIB | ifAdminStatus ifAlias ifIndex ifName ifOperStatus InterfaceIndex |
| RFC1213-MIB | PhysAddress |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6889.2.1.6 | IdentityavayaEISWan | The mib for controlling WAN-related features of WAN access devices. | ||
| 1.3.6.1.4.1.6889.2.1.6.1 | NodedeviceSpecific | |||
| 1.3.6.1.4.1.6889.2.1.6.1.1 | Nodex330wanSpecific | |||
| 1.3.6.1.4.1.6889.2.1.6.1.1.1 | TableintWanPortTable | not-accessible | current | Internal Wan Port configuration table. Each entry in the table specifies the configuration of an internal port, connecting the WAN blade to the host switch. |
| 1.3.6.1.4.1.6889.2.1.6.1.1.1.1 | RowintWanPortEntry | not-accessible | current | Table of port configuration entries. |
| 1.3.6.1.4.1.6889.2.1.6.1.1.1.1.1 | ColumnintWanGroupID | read-only | current | The Id of the group in which the port to be configured resides. |
| 1.3.6.1.4.1.6889.2.1.6.1.1.1.1.2 | ColumnintWanPortID | read-only | current | The Id of the port to be configured. |
| 1.3.6.1.4.1.6889.2.1.6.1.1.1.1.3 | ColumnintWanPortSpeed | read-write | current | This parameter defines the port speed: ethernet(1) and fastEthernet(2). |
| 1.3.6.1.4.1.6889.2.1.6.1.1.1.1.4 | ColumnintWanPortMode | read-write | current | The flow control mode of the port when operated in full duplex: halfDuplex(1) - Half duplex connection, standard mode for segment fullDuplexNoPause(2) - Full d… |
| 1.3.6.1.4.1.6889.2.1.6.1.1.1.1.5 | ColumnintWanPortAutoNegotiation | read-write | current | This object define if the Auto Sense /Auto Negotiation process is enable(1) or disable (2) for modules that don't support the Auto Snese mode please define the… |
| 1.3.6.1.4.1.6889.2.1.6.1.1.1.1.6 | ColumnintWanPortVLANMode | read-write | current | This item defines the VLAN operation mode of the port: perPortOnly(1) - indicates that all received packets are mapped to the VLAN, defined on the port, and pa… |
| 1.3.6.1.4.1.6889.2.1.6.1.1.1.1.7 | ColumnintWanPortVLANBindingMode | read-write | current | VLAN binding mode assigned to this port. static - this port supports only the egress VLAN list as configured manually in its corresponding dot1qVlanStaticEgres… |
| 1.3.6.1.4.1.6889.2.1.6.1.1.1.1.8 | ColumnintWanPortVlanList | read-write | current | An 4096-bit-long bitmask of all vlans supported on a port. For example: A 1 bit in the 10th place means that vlan 10 is supported. |
| 1.3.6.1.4.1.6889.2.1.6.1.1.2 | Tableds0BundleMemmbersTable | not-accessible | current | This table is used to quickly assign members to a ds0Bunbdle Its effect is similar as using the ifStack table, only it does it in one go. |
| 1.3.6.1.4.1.6889.2.1.6.1.1.2.1 | Rowds0BundleMemmbersEntry | not-accessible | current | An entry in yhr ds0BundleMembers table |
| 1.3.6.1.4.1.6889.2.1.6.1.1.2.1.1 | Columnds0BundleMemmbersList | read-write | current | A bit mask of timeslots that are part of the channel group identified by ds0BundleIndex. First (leftmost) bit stands for timeslot 0. |
| 1.3.6.1.4.1.6889.2.1.6.1.1.2.1.2 | Columnds0BundleSpeedFactor | read-write | current | The speed factor for this ds0bundle. This can either be 56k or 64k. |
| 1.3.6.1.4.1.6889.2.1.6.2 | Nodeifs | |||
| 1.3.6.1.4.1.6889.2.1.6.2.1 | Nodeds1objs | |||
| 1.3.6.1.4.1.6889.2.1.6.2.1.1 | Scalards1DeviceMode | read-write | current | The configured device mode. Either all DS1s on the device are e1, t1 or j1. To activate a new selection, perform 'copy running-config startup-config' and reset… |
| 1.3.6.1.4.1.6889.2.1.6.2.1.2 | Scalards1CurrentDeviceMode | read-only | current | The current device mode |
| 1.3.6.1.4.1.6889.2.1.6.2.2 | NodeifTablePrivateExtensions | |||
| 1.3.6.1.4.1.6889.2.1.6.2.2.1 | TableifTableXtndTable | not-accessible | current | The ifTableXtndTable table. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1 | RowifTableXtndEntry | not-accessible | current | This table is an extension of the itTable. It contains a row per every row of the ifTable. It is used to perform additional configuration, not available throug… |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.1 | ColumnifTableXtndIndex | read-only | current | The index in the ifTable for which this row is providing information. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.2 | ColumnifTableXtndPeerAddress | read-only | current | The IP Address of the peer device on the link identified by this ifIndex. This value is only meaningful for point to point links. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.3 | ColumnifTableXtndVoIPQueue | read-write | current | Turns voip-queueing on or off or turn fair-queuing on. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.4 | ColumnifTableXtndCableLength | read-write | current | Cable length attenuation on this interface. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.5 | ColumnifTableXtndGain | read-write | current | The gain on this interface. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.6 | ColumnifTableXtndDescription | read-write | current | This object is a Read-Write equivalent of ifDescr. It is used to enable users to change the value of ifDescr. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.7 | ColumnifTableXtndKeepAlive | read-write | current | Time, in seconds, between keepalive messages. 0 means keepalive should not be used, or is not supported. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.8 | ColumnifTableXtndMtu | read-write | current | This object is a R/W copy of the ifMtu object from the ifTable. It enables changing of the MTU for interfaces that allow this. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.9 | ColumnifTableXtndInvertTxClock | read-write | current | This object is only applicable for rs232-like synchronuos DTE interefaces. It determines whether the transmit clock is inverted. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.10 | ColumnifTableXtndDTELoopback | read-write | current | This object is only applicable for rs232-like synchronuos DTE interefaces. It determines the status of the DTE loopback. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.11 | ColumnifTableXtndIgnoreDCD | read-write | current | This object is only applicable for rs232-like synchronuos DTE interefaces. This command configures the serial interface to monitor the DSR/CTS signals, instead… |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.12 | ColumnifTableXtndIdleChars | read-write | current | This object is only applicable for rs232-like synchronuos DTE interefaces. This command sets the bit pattern used to indicate an idle line. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.13 | ColumnifTableXtndBandwidth | read-write | current | This object is used to determine the bandwidth of the interface, in Kbps, for interfaces that support it. This information is informational, and does not affec… |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.14 | ColumnifTableXtndEncapsulation | read-write | current | Applicable only to layer 1 interfaces. The type of the layer 2 interface on top of this Interface. ppp - The Layer 2 interface is PPP frameRelay - The Layer 2 … |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.15 | ColumnifTableXtndOperStatus | read-only | current | An extension to ifOperStatus, for showing faults and partial faliures, including aggregation of upper layer faults (up to but not including L3). The following … |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.16 | ColumnifTableXtndBackupCapabilities | read-only | current | Determines what roles an interface can play in a backup relation. This should be filled per interface, according to its capabilities. primaryAndBackup - the in… |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.17 | ColumnifTableXtndBackupIf | read-write | current | The ifIndex of the backup interface for this primary interface. 0 if no backup is defined. The agent will not permit setting this value, if: The intreface is n… |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.18 | ColumnifTableXtndBackupEnableDelay | read-write | current | The delay (in Secs) that a primary interface must be inactive before its backup interface is activated. Configurable on the primary interface only. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.19 | ColumnifTableXtndBackupDisableDelay | read-write | current | The delay (in Secs) between the primary coming back to life and its activation and de-activation of its backup interface. The value '-1' means that the primary… |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.20 | ColumnifTableXtndPrimaryIf | read-only | current | On a backup interface, this will point to the primary interface. '0' means no primary interface. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.21 | ColumnifTableXtndCarrierDelay | read-write | current | This command sets the carrier delay on a serial interface in seconds. If a link goes down and comes back up before the carrier delay timer expires, the down st… |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.22 | ColumnifTableXtndDtrRestartDelay | read-write | current | Determines the period in seconds for deactivating DTR signal when the serial line is inactive. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.23 | ColumnifTableXtndDtrPulseTime | read-write | current | Determines the interval in milliseconds DTR signal is held inactive when the serial line is inactive. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.24 | ColumnifTableXtndLoadInterval | read-write | current | Determines interval (in secs) for exponential averages calculations for an interface. Must be a multiple of 30. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.25 | ColumnifTableXtndInputRate | read-only | current | Expoential Average of the Number of bits received per second calculated for the interval specified in ifTableXtndLoadInterval. The exponentail average smooths … |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.26 | ColumnifTableXtndOutputRate | read-only | current | Expoential Average of the Number of bits sent per second calculated for the interval specified in ifTableXtndLoadInterval. The exponentail average smooths peak… |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.27 | ColumnifTableXtndInputLoad | read-only | current | Expoential Average of the Input Load calculated for the interval specified in ifTableXtndLoadInterval. Load is expressed a a number in the range 1 to 255. 255 … |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.28 | ColumnifTableXtndOutputLoad | read-only | current | Expoential Average of the Output Load calculated for the interval specified in ifTableXtndLoadInterval. Load is expressed a a number in the range 1 to 255. 255… |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.29 | ColumnifTableXtndReliability | read-only | current | Expoential Average of the Reliability of an interface calculated for the interval specified in ifTableXtndLoadInterval. Reliability is expressed a a number in … |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.30 | ColumnifTableXtndTrafficShaperRate | read-write | current | This item controls a traffic shaper on the interface. Its value is the shaping rate in bits per seconds. When zero, the shaper is disabled |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.31 | ColumnifTableXtndCacBBL | read-write | current | Dynamic CAC Bearer Bandwidth Limit in kilo-bits-per-seconds. This item equals -1 when dynamic CAC is not configured. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.32 | ColumnifTableXtndCacPriority | read-write | current | If more than one interface with configured BBL is up, the gateway reports the BBL of the interface with the highest activation priority value. If N active inte… |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.33 | ColumnifTableXtndCacifStatus | read-only | current | Dynamic CAC status of the interface. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.34 | ColumnifTableXtndCommonApplifStatus | read-only | current | Supported Application on this Interface. If 0 value - Not supported else supported. Bit 0 - Unknown Application. Bit 1 - Support of Next Hop Interface in Polic… |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.35 | ColumnifTableXtndIpSecDfBit | read-write | current | This item controls whether the DF (don't fragment) bit of incoming packets is copied to the external IPSec header |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.36 | ColumnifTableXtndMinPmtu | read-write | current | Set the minimal PMTU for IPSec tunnels. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.37 | ColumnifTableXtndConfString | read-write | current | An additional configuration string for the interface. init-string - for modem interfaces |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.38 | ColumnifTableXtndPppIpcpDnsOptionRequest | read-write | current | PPP-IPCP DNS option request. Configuration whether during the PPP-IPCP negotiation the DNS option will be requested. Default: Disable. The DNS information gath… |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.39 | ColumnifTableXtndKeepaliveTrackId | read-write | current | Bind the status of this interface to an object-tracker by specifying the ID of the object-tracker (avstrTrackerId in AVAYA-SAA-TRACK-MIB). A value of 0 means t… |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.40 | ColumnifTableXtndFrTrafficShaping | read-write | current | This object determines / indicates whether Frame-Relay Traffic-Shaping is enabled (on) or disabled (off) for this interface. This object can be set only for in… |
| 1.3.6.1.4.1.6889.2.1.6.2.2.1.1.41 | ColumnifTableXtndType | read-write | current | Extended type is, currently, required for modem interfaces |
| 1.3.6.1.4.1.6889.2.1.6.2.2.2 | TablextndKeepAliveTable | not-accessible | current | The Extended Keepalive Parameters Table. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.2.1 | RowxtndKeepAliveEntry | not-accessible | current | This table contains the extended keepalive parameters. The Table is per interface. Although for the first phase it will be relevant for WAN Fast Ethernet Port.… |
| 1.3.6.1.4.1.6889.2.1.6.2.2.2.1.1 | ColumnxtndKeepAliveifIndex | read-only | current | The index in the ifTable for which this row is providing information. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.2.1.2 | ColumnxtndKeepAliveMethod | read-write | current | The type of the extended keepalive. icmpPing(1),tcpConnect(2),httpGet(3) Default is IcmpPing. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.2.1.3 | ColumnxtndKeepAliveTimeout | read-write | current | Timeout in seconds to wait for a reply. Applicable to non-TCP tests such as ICMP Echo, UDP. Default 1second. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.2.1.4 | ColumnxtndKeepAliveUpRetries | read-write | current | The number of successful extended keepalive necessary to determine that the next hop router is operational. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.2.1.5 | ColumnxtndKeepAliveDownRetries | read-write | current | The number of unsuccessful extedned keepalive necessary to determine that the next hop router is not operational. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.2.1.6 | ColumnxtndKeepAliveInterval | read-write | current | The extended keepliave interval in seconds |
| 1.3.6.1.4.1.6889.2.1.6.2.2.2.1.7 | ColumnxtndKeepAliveSrcIPAddr | read-write | current | The Source IP address to use. Default is the primary IP address of the interface. Setting the address 0.0.0.0 will reset the xtndKeepAliveSrcIPAddr to the prim… |
| 1.3.6.1.4.1.6889.2.1.6.2.2.2.1.8 | ColumnxtndKeepAliveIPAddr | read-write | current | The IP address that it status shall be checked. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.2.1.9 | ColumnxtndKeepAliveNextHopMAC | read-write | current | The next Hop MAC, Valid for Ethernet Interfaces. |
| 1.3.6.1.4.1.6889.2.1.6.2.2.2.1.10 | ColumnxtndKeepAliveStatus | read-only | current | The Status of the extended KeepAlive. I.e. whether the current extended KeepAlive succeeded. 1 - up 2 - down 3 - disable |
| 1.3.6.1.4.1.6889.2.1.6.2.2.2.1.11 | ColumnxtndKeepAliveMode | read-write | current | Extended KeepAlive Mode. 1 - enable 2 - disable |
| 1.3.6.1.4.1.6889.2.1.6.2.4 | NodeframeRelay | |||
| 1.3.6.1.4.1.6889.2.1.6.2.4.1 | TablefrDlcmiXtndTable | not-accessible | current | This table extends the standard frDlcmiTable, which models RFR I/Fs. Entries are created by the agent for Frame Relay I/Fs, and are deleted when those entries … |
| 1.3.6.1.4.1.6889.2.1.6.2.4.1.1 | RowfrDlcmiXtndEntry | not-accessible | current | Each Entry corresponds to a Frame Relay Interface. Entries are created & deleted automatically by the agent, when ifTableXtndEncapsulation of the underlying La… |
| 1.3.6.1.4.1.6889.2.1.6.2.4.1.1.1 | ColumnfrDlcmiXtndIndex | read-only | current | The ifIndex assigned to The Frame Relay interface is calculated by a known formula, which is agent-type specific. |
| 1.3.6.1.4.1.6889.2.1.6.2.4.1.1.2 | ColumnfrDlcmiXtndLMIAutoSense | read-write | current | Enable/disable automatic detection (By sending all supported keepalives) of the Local Management Interface (LMI) on the Frame Relay Interface. |
| 1.3.6.1.4.1.6889.2.1.6.2.4.2 | TablefrStaticCircuitTable | not-accessible | current | This table is used to create/associate/delete A Virtual Channel (DLCI) with a specific Frame Relay Sub Interface. When an entry is created in this table: If th… |
| 1.3.6.1.4.1.6889.2.1.6.2.4.2.1 | RowfrStaticCircuitEntry | not-accessible | current | An Entry represent a Virtual Channel available on a specific Frame Relay Interface. |
| 1.3.6.1.4.1.6889.2.1.6.2.4.2.1.1 | ColumnfrStaticCircuitSubIfIndex | read-only | current | Description. |
| 1.3.6.1.4.1.6889.2.1.6.2.4.2.1.2 | ColumnfrStaticCircuitDLCI | read-only | current | The virtual channel identifier. |
| 1.3.6.1.4.1.6889.2.1.6.2.4.2.1.3 | ColumnfrStaticCircuitDLCIrole | read-only | current | The role of the VC in this interface. primary - the state of this VC determines the operStatus of the interface. For point to point interfaces, the agent will … |
| 1.3.6.1.4.1.6889.2.1.6.2.4.2.1.4 | ColumnfrStaticCircuitStatus | read-write | current | Used to create/associate/delete a DLCI to a Sub FrameRelay Interface. Note that the frStaticCircuitDLCIrole defines limitations on creation and deletion of DLC… |
| 1.3.6.1.4.1.6889.2.1.6.2.4.2.1.5 | ColumnfrStaticCircuitMapClass | read-write | current | A pointer to a 'map-class frame-relay' entry applicable for this row. A 'map-class frame-relay' is an entry in the frMapClassTable. The value of this object mu… |
| 1.3.6.1.4.1.6889.2.1.6.2.4.3 | TablefrSubIfTable | not-accessible | current | A Frame Relay Sub Interface is the Layer 2 interface to which Layer 3 (IP) Interfaces are assigned. This Logical Interface is hinted at but not modeled by the … |
| 1.3.6.1.4.1.6889.2.1.6.2.4.3.1 | RowfrSubIfEntry | not-accessible | current | An Entry in this table defines a Frame Relay Sub Interface of a specific type, defined over a specific Frame Relay Interface. Note that although the MIB model … |
| 1.3.6.1.4.1.6889.2.1.6.2.4.3.1.1 | ColumnfrSubIfDlcmiIndex | read-only | current | The ifIndex of the Frame Relay Interface this Sub Interface is created over. |
| 1.3.6.1.4.1.6889.2.1.6.2.4.3.1.2 | ColumnfrSubIfSubIndex | read-only | current | The ifIndex of the Sub Interface. Note that the Mnagement station must select a sub interface number in the permissible range (which is agent-type dependent.) … |
| 1.3.6.1.4.1.6889.2.1.6.2.4.3.1.3 | ColumnfrSubIfType | read-only | current | The Type of the Sub Interface. point2point - A Point to Point Interface. Point2multiPoint - Point to multi-point interface. |
| 1.3.6.1.4.1.6889.2.1.6.2.4.3.1.4 | ColumnfrSubIfStatus | read-create | current | Creation/Deletion of a Frame Relay Sub Interface over a Frame Relay Interface. The Agent will refuse to delete a Sub Interface if there are IP Interfaces assoc… |
| 1.3.6.1.4.1.6889.2.1.6.2.4.4 | TablefrMapClassTable | not-accessible | current | This table contains the 'map-class frame-relay' entries in the system. A 'map-class frame-relay' entry is a collection of QoS-related parameters that can be at… |
| 1.3.6.1.4.1.6889.2.1.6.2.4.4.1 | RowfrMapClassEntry | not-accessible | current | An entry in the table, which represents a 'frame-relay map-class' object. |
| 1.3.6.1.4.1.6889.2.1.6.2.4.4.1.1 | ColumnfrMapClassName | not-accessible | current | The name of the map-class, which is also the only index component of this table. NOTE: This object can only contain a lower-case string! Trying to use upper-ca… |
| 1.3.6.1.4.1.6889.2.1.6.2.4.4.1.2 | ColumnfrMapClassBcOut | read-write | current | The output Commited Burst size, in bits. Valid range is 300-39999999. |
| 1.3.6.1.4.1.6889.2.1.6.2.4.4.1.3 | ColumnfrMapClassBeOut | read-write | current | The output Excess Burst size, in bits. Valid range is 0-39999999. |
| 1.3.6.1.4.1.6889.2.1.6.2.4.4.1.4 | ColumnfrMapClassCirOut | read-write | current | The Committed Information Rate, in bits per second. Valid range is 1000-39999999. |
| 1.3.6.1.4.1.6889.2.1.6.2.4.4.1.5 | ColumnfrMapClassFrf12Frag | read-write | current | Disable or enable FRF.12 fragmentation, and determine fragment size: The reserved value zero means FRF.12 fragmentation is disabled. A value larger then zero m… |
| 1.3.6.1.4.1.6889.2.1.6.2.4.4.1.6 | ColumnfrMapClassRowStatus | read-write | current | This object is used to create a new row or destroy an existing row in the manner described in the definition of the RowStatus textual convention. The value of … |
| 1.3.6.1.4.1.6889.2.1.6.2.5 | NodewanDialer | |||
| 1.3.6.1.4.1.6889.2.1.6.2.5.1 | TablewanDialerTable | not-accessible | current | This table is used for configuring Dialer interfaces. |
| 1.3.6.1.4.1.6889.2.1.6.2.5.1.1 | RowwanDialerEntry | not-accessible | current | |
| 1.3.6.1.4.1.6889.2.1.6.2.5.1.1.1 | ColumnwanDialerModemIf | read-write | current | The ifIndex of the modem interface |
| 1.3.6.1.4.1.6889.2.1.6.2.5.1.1.2 | ColumnwanDialerState | read-only | current | The current state of the dialer finit-state-machine |
| 1.3.6.1.4.1.6889.2.1.6.2.5.1.1.3 | ColumnwanDialerPersistentDelay | read-write | current | The number of seconds between persistent dial attempts (zero= no persistent dialing) |
| 1.3.6.1.4.1.6889.2.1.6.2.5.1.1.4 | ColumnwanDialerPersistentMaxAttempts | read-write | current | The interval between persistent (non-DDR) dial attempts. Zero means no persistent dialing |
| 1.3.6.1.4.1.6889.2.1.6.2.5.1.1.5 | ColumnwanDialerPersistentReenable | read-write | current | The time (in seconds) the dialer is disabled after it exhausts its consecutive dial attempts quota (wanDialerPersistentMaxAttempts). Zero means that the dialer… |
| 1.3.6.1.4.1.6889.2.1.6.2.5.1.1.6 | ColumnwanDialerOrder | read-write | current | The dial strings list usage order where: sequential(1) : The dialer starts from the beginning of the list when there is a new reason to dial (dial trigger. rou… |
| 1.3.6.1.4.1.6889.2.1.6.2.5.1.1.7 | ColumnwanDialerString1 | read-write | current | The 1st dial string in the list(NULL=unconfigured) |
| 1.3.6.1.4.1.6889.2.1.6.2.5.1.1.8 | ColumnwanDialerString2 | read-write | current | The 2nd dial string in the list(NULL=unconfigured) |
| 1.3.6.1.4.1.6889.2.1.6.2.5.1.1.9 | ColumnwanDialerString3 | read-write | current | The 3rd dial string in the list(NULL=unconfigured) |
| 1.3.6.1.4.1.6889.2.1.6.2.5.1.1.10 | ColumnwanDialerString4 | read-write | current | The 4th dial string in the list(NULL=unconfigured) |
| 1.3.6.1.4.1.6889.2.1.6.2.5.1.1.11 | ColumnwanDialerString5 | read-write | current | The 5th dial string in the list(NULL=unconfigured) |
| 1.3.6.1.4.1.6889.2.1.6.2.5.1.1.12 | ColumnwanDialerLastDialed | read-only | current | The last used display string |
| 1.3.6.1.4.1.6889.2.1.6.2.5.1.1.13 | ColumnwanDialerWaitForIpcp | read-write | current | The maximum time (in seconds) the dialer waits from dialing until PPP/IPCP is up. |
| 1.3.6.1.4.1.6889.2.1.6.2.5.1.1.14 | ColumnwanDialerPersistentInitial | read-write | current | The minimum delay (in seconds) from boot to persitent dialing. |
| 1.3.6.1.4.1.6889.2.1.6.4 | NodeavayaEISWanTraps | |||
| 1.3.6.1.4.1.6889.2.1.6.5 | NodeavayaEISWanGroups | |||
| 1.3.6.1.4.1.6889.2.1.6.5.1 | GrouphostModuleGroup | current | Mib objects for controlling the fabric port, connecting a LAN switch to its WAN router. | |
| 1.3.6.1.4.1.6889.2.1.6.5.2 | GroupwanRouterBladeGroup | current | Mib object that belong to the WAN router. | |
| 1.3.6.1.4.1.6889.2.1.6.7 | NodeavayaEISWanCompliances | |||
| 1.3.6.1.4.1.6889.2.1.6.7.1 | CompliancehostModuleCompliance | current | The host module should only support the host module group. | |
| 1.3.6.1.4.1.6889.2.1.6.7.2 | CompliancewanRouterBladeCompliance | current | The wan router blade should support the wan router blade group. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| OnOff | INTEGER { on(1), off(2), notRelevant(255) } | current | This textual convention describes a feature that can be either turned on, off or is not relevant for an object. |